[Awesome Miner] - Powerful Windows GUI to manage and monitor up to 200000 miners

[patrike]

Can you please provide a screenshot of your Pool Properties dialog in Awesome Miner as well? (You can blank out sensitive parts like your e-mail and wallet address)

Here it is:
Thanks

Can you try to leave the worker name field empty?

[patrike]

I'm trying to get statistics on SMART but it doesn't seem to work.

Awesome Miner seems to have SmartCash as SHA-3 algo and is for some reason using very different stats than whattomine. I've added SMART as a new coin under "Coins & Profit > Statistics" and added its json URL but it doesn't work (have changed update interval to 2 minutes).

Other coins I've added the same way works great. But not SMART. Any ideas?

I don't think Awesome Miner has this coin built-in at all. Also, please note that you have both "SmartCash SMART (SHA3/Keccak)" and another coin called "Smartcoin SMC (X11)" listed on WhatToMine:
https://whattomine.com/coins/197-smart-keccak
https://whattomine.com/coins/159-smc-x11

Is it "SmartCach SMART (SHA3/Keccak)" you want to use but get incorrect stats for?

[acyclovir]

Hi Patrike, is possible to create a rule to periodically change of mining pool (by specified time, not by profit) something like each 6 or 8 hours?  Could you please provide an example? Thanks

You can define a rule with a Time trigger that fires at 6 AM, with the action Miner Command -> Change Pool to YourPool#1
Then you define a second rule, with a Time trigger that fires at 2 PM, with the action Miner Command -> Change Pool to YourPool#2
Then a third...

Please make sure that all three rules are enabled once you added them.

Hey Patrike

I setup four rules 6 hours a part to switch pools and no pools switched after 6 hours, so i set it to switch every hour with two rules, it still didn't switch pools with GPU mining.
Haven't tired with ASIC miners yet i saw it's possible ...

Is there more i need on I might have turned off ? ...

I have tried with AntMiners, works like a charm.

Patrike is possible to add mining-dutch.nl Pool to AW?

[patrike]

Hello guys, need help to config my pools . I did everything from the WEB but still not working
I'm trying to set up pool for PIRL and there is some more commands in command line witch i'm not sure where to write it .
esm 0 -mode 1 -ethi -16384 -erate 1 -wd 1 -allcoins 1 -- like this
In pool properties there is Claymore pool settings, so in the settings i put ESM ->  value 0 and same for other options but it's not working
On Advanced there is option ADD pool specific command line , so i just copied this line -esm 0 -mode 1 -ethi -16384 -erate 1 -wd 1 -allcoins 1 and add it there - NOT working . I know it's should work , just don't know how to config it
and same story with coin balance ... What Block explorer API URL i shoud post for ethermine.org like examp?
Any advise will be helpful

Can you use the Diagnostics button in the toolbar to verify if any of these commands are sent correctly to the Claymore mining software?

Ethermine is a mining pool and will not work with the Wallet Balance feature in Awesome Miner. I will add support for pool balance feature in the future.

[nu1mlock]

I'm trying to get statistics on SMART but it doesn't seem to work.

Awesome Miner seems to have SmartCash as SHA-3 algo and is for some reason using very different stats than whattomine. I've added SMART as a new coin under "Coins & Profit > Statistics" and added its json URL but it doesn't work (have changed update interval to 2 minutes).

Other coins I've added the same way works great. But not SMART. Any ideas?

I don't think Awesome Miner has this coin built-in at all. Also, please note that you have both "SmartCash SMART (SHA3/Keccak)" and another coin called "Smartcoin SMC (X11)" listed on WhatToMine:
https://whattomine.com/coins/197-smart-keccak
https://whattomine.com/coins/159-smc-x11

Is it "SmartCach SMART (SHA3/Keccak)" you want to use but get incorrect stats for?

I'm trying to add SmartCash (197) and have added its json to Awesome Miner. I've also added it as a coin manually but I don't think that matters (tried without it as well).

Or are you saying that the SmartCash that was added to SHA-3 is the one I should use? If so, then it's very out of date on prices I think. Sorry if I'm doing something wrong, I really want everything to work properly before I purchase a license. Thanks!

[toptek]

Can you try to toubleshoot this by adding an action of the type Notification instead, so you see if the rule triggers correctly. The fact that many kinds of mining software doesn't have a good way to support pool switching, that could also be the issue. Awesome Miner tries to workaround that by reconfiguring the miner and restart it, but it could be something here I need to investigate more.

it did give me a Notification if I Understood what you wanted I left the pool switch in an also added type Notification and it gave me a Notification or popped one under Notifications with no description the  pool didn't switch .. this one is using
EWBF's CUDA Zcash miner for NV cards it was a 1070 and 1080 ..

At 8 pm i have one of my Scrpt miners setup to switch and that does appears to be working it went to the pool i have set in awesome right a way, hoping it will switch at 8 pm .. it's using CGminer


it did Switch at 8 pm on the ASIC Scrpt miner or A4 Dominator ....

[mine4profit84]

Are there any plans to incorporate DTSM's miner into awesome miner? I have been trying to add it myself via the managed template and generic miner option, but i am a bit confused on what to add for command line options. I have been unable to find any help on this or what awesome miner expects for this section. Any help would be appreciated. 

[Dalba]

Hello Patrike,
I would have a suggestion regarding profit switching.
As you can see in the picture below, i defined a profit profile for each type of graphic card i own in my rigs.

I then defined a profile group for each of my rig to have exact stats regarding income.
In profit group window, can you add an option to set up a specific profit switching profile.

This way it could be possible to have one rig that switch mining between nicehash and an ethereum pool, another rig that switch between zpool and a zcash pool.

It would be a great addition !

Today the pools for the profit switcher are defined on a global level (Options dialog, Profit switching). I assume want want this per profile (or group profile)?
I've had similar requests in the past to have have the profit switcher working on multiple set of pools, where not all miners would use the same pools.

Hello,
Yes, you assume right ! We're already able to create multiple pools groups. What i would like is the possibility to create profit switcher for different group profile ! Doing this, it would be possible for example to create a group profile that switch between pools defined in pool group 1, and create another group profile that would switch pools defined in pool group 2.
I would be a really great feature to manage multiple rigs dedicated to specific coins or algorithms.

[toptek]

Are there any plans to incorporate DTSM's miner into awesome miner? I have been trying to add it myself via the managed template and generic miner option, but i am a bit confused on what to add for command line options. I have been unable to find any help on this or what awesome miner expects for this section. Any help would be appreciated.  

all ready asked an the Answer was hell look at it an maybe .... same problems I have loading it , i got it run as a upload replacing EWBF's CUDA Zcash miner an run with no stats couldn't get it to run any other way with Awesome .. even using Generic miner..

[patrike]

I'm trying to get statistics on SMART but it doesn't seem to work.

Awesome Miner seems to have SmartCash as SHA-3 algo and is for some reason using very different stats than whattomine. I've added SMART as a new coin under "Coins & Profit > Statistics" and added its json URL but it doesn't work (have changed update interval to 2 minutes).

Other coins I've added the same way works great. But not SMART. Any ideas?

I don't think Awesome Miner has this coin built-in at all. Also, please note that you have both "SmartCash SMART (SHA3/Keccak)" and another coin called "Smartcoin SMC (X11)" listed on WhatToMine:
https://whattomine.com/coins/197-smart-keccak
https://whattomine.com/coins/159-smc-x11

Is it "SmartCach SMART (SHA3/Keccak)" you want to use but get incorrect stats for?

I'm trying to add SmartCash (197) and have added its json to Awesome Miner. I've also added it as a coin manually but I don't think that matters (tried without it as well).

Or are you saying that the SmartCash that was added to SHA-3 is the one I should use? If so, then it's very out of date on prices I think. Sorry if I'm doing something wrong, I really want everything to work properly before I purchase a license. Thanks!

I tried to add SmartCash with the JSON link, and it is showing up in the Coins tab. I did however notice that on the WhatToMine web site, they currently have a warning notice on this specific coin "Active(lagging)", indicating that the coin stats can be outdated. Awesome Miner is simply displaying the statistics from WhatToMine, so if there are delays in the statistics on their site, the same numbers will show up in Awesome Miner.

[patrike]

Can you try to toubleshoot this by adding an action of the type Notification instead, so you see if the rule triggers correctly. The fact that many kinds of mining software doesn't have a good way to support pool switching, that could also be the issue. Awesome Miner tries to workaround that by reconfiguring the miner and restart it, but it could be something here I need to investigate more.

it did give me a Notification if I Understood what you wanted I left the pool switch in an also added type Notification and it gave me a Notification or popped one under Notifications with no description the  pool didn't switch .. this one is using
EWBF's CUDA Zcash miner for NV cards it was a 1070 and 1080 ..

At 8 pm i have one of my Scrpt miners setup to switch and that does appears to be working it went to the pool i have set in awesome right a way, hoping it will switch at 8 pm .. it's using CGminer
it did Switch at 8 pm on the ASIC Scrpt miner or A4 Dominator ....

I will have to look into the Change Pool trigger. For ASIC's that command is almost always supported, which is why it works fine on your scrypt miner. Awesome Miner is however doing some tricks to change pools on GPU mining software that doesn't support it - but I need to investigate why this action doesn't do it properly.

In Awesome Miner 4.2 you also have the "Apply Managed Template" action, where you not only can change pool, but also algorithm, mining software and more. In fact, way more powerful than just chaning the pool. Maybe this one works better in your scenario?

[patrike]

Are there any plans to incorporate DTSM's miner into awesome miner? I have been trying to add it myself via the managed template and generic miner option, but i am a bit confused on what to add for command line options. I have been unable to find any help on this or what awesome miner expects for this section. Any help would be appreciated.  

all ready asked an the Answer was hell look at it an maybe .... same problems I have loading it , i got it run as a upload replacing EWBF's CUDA Zcash miner an run with no stats couldn't get it to run any other way with Awesome .. even using Generic miner..

I do get many requests for features and mining software, and I try to implement the most requested features.

Are you using the exact same command line arguments for the Generic Miner in Awesome Miner, as you use when manually launching the DTSM miner? Any output in if you use the Diagnostics button in the toolbar?

[patrike]

Awesome Miner version 4.2

- Notifications via Telegram using Cloud Services
- Support variables in notifications messages and Webhooks, to provide dynamic information based on the miner that triggered the notification. See Notifications help page on the web site for details.
- New Rule action to apply a Managed Template to one or more miners
- Filtering of miners in the Options dialog to faster find a specific miner by name. Filtering also supported when applying Managed Templates.
- Show IP address of the selected miner in the Summary tab
- Correction to Performance History when generating reports including both daylight saving time and standard time
- Correction to Bitcoin network hashrate

[toptek]

Are you using the exact same command line arguments for the Generic Miner in Awesome Miner, as you use when manually launching the DTSM miner? Any output in if you use the Diagnostics button in the toolbar?

I get a popup error I'd have to load it again to see using it with Generic Miner so no basically as far as getting some kind of Diagnostics report .... then i tired it with EWBF's CUDA Zcash miner with the upload tool replacing EWBF's CUDA Zcash miner sense it's command line are all most the exact same with different names an it loaded fine with no stats in AM, if i saw stats I don't think i would ask an I went to the miners thread an asked to add api support for the miner ,they told me in a nice way if uses Java for api support so no .....

EWBF's CUDA Zcash miner

Code:

miner --server  --user --port

DTSM miner

Code:

zm --server --user --port

 with no api support DTSM uses Java for api .


DTSM miner seems a lot more stable then EWBF's CUDA Zcash miner and is faster ... even after the mishap that happen the other day with version 5.4 with the Dev an his greed for fees he seemed more worried about the fees  then anything ...but its fixed, i don't use it because I'm hocked on awesome miner and use AM for everything i do mining, it can handle ..IF you add it you add it . I'll live if not, I don't have  a issue with EWBF's CUDA Zcash miner other then it's slower after i figured out why it would stop on me some times .   so all good ..

Id thought Id ask for DTSM miner support, can't hurt to ask ...

but the pool switching I'm all for if you get it working flawlessly, i use a proxy that switches on a set timer, i won't need to ....sense I'm not mining for short term profit, i mine to keep the coins .it's prefect no proxy needed and it works with GPU's or any miner or looks like it will  ... plus things got better for me, so i hold on to coins now .....

I haven't set up any temp plates had no need to but if it switches better using them with 4.2  and auto switch on a timer which I'm trying now, I'll learn how to .

[mine4profit84]

Are there any plans to incorporate DTSM's miner into awesome miner? I have been trying to add it myself via the managed template and generic miner option, but i am a bit confused on what to add for command line options. I have been unable to find any help on this or what awesome miner expects for this section. Any help would be appreciated.  

all ready asked an the Answer was hell look at it an maybe .... same problems I have loading it , i got it run as a upload replacing EWBF's CUDA Zcash miner an run with no stats couldn't get it to run any other way with Awesome .. even using Generic miner..

I do get many requests for features and mining software, and I try to implement the most requested features.

Are you using the exact same command line arguments for the Generic Miner in Awesome Miner, as you use when manually launching the DTSM miner? Any output in if you use the Diagnostics button in the toolbar?

That's just it, i'm not even getting ZM to launch via Awesome Miner. Do i have to enter all the command line options, filled out with the information entirely (like server/pool, workername etc)? How would that work if I want Awesome Miner to pass the information based on which coin I want to mine via Profit Switching? The documentation around importing custom mining software is lacking IMO, any resources you can point me to that have more detailed information?

[whoisthismanoO]

 * New trigger to detect low device count for a miner, to find out when a GPU is missing

After about 10 days I can report, that this future is not working properly.
Often happens that miner falls, AM restarts them, all videocards are in place I see, but the trigger reports that there one GPU is missing.

Was the miner first restarted and then the trigger indicates a missing GPU, or did you define a rule that restart the miner when there is a missing GPU?

Yes, the miner first resterted and then the trigger indicates a missing GPU but all GPU was in place.
But it was the other way around - first the trigger said that the card is lost and then the miner falls and restarted.
But anyway...
Maybe it's hard for me to explain it all. But the fact is that if the GPU is lost then it can not be restore without a full reboot of Windows. At least for Nvidia. I don't know about AMD.

Maybe you need to change the method of definition?
I used a different service earlier and never had false positives before.

Thank you!!

Instead of having an action that restarts the miner, can you configure it so you get a notification only? Then you can look at the miner and see if the trigger was correct about the number of GPU's.

Yes, that's exactly what I did right away. And I saw that all the GPUs are in place.

[whoisthismanoO]

Awesome Miner version 4.2
- Support variables in notifications messages and Webhooks, to provide dynamic information based on the miner that triggered the notification. See Notifications help page on the web site for details.

Be so kind, where can I find the details?
Because on Notifications help page on the web site I found just one sentence and nothing new:

Code:

Webhooks

Webhooks will make a HTTP request to the specified URL for every notification. The default setting is to use POST, which is required to include the notification content in the HTTP body.

Thank you!

[ilyxa]

 
How to hide my miner from Awesome Miner stats reading by IP?

[toptek]

Are there any plans to incorporate DTSM's miner into awesome miner? I have been trying to add it myself via the managed template and generic miner option, but i am a bit confused on what to add for command line options. I have been unable to find any help on this or what awesome miner expects for this section. Any help would be appreciated.  

all ready asked an the Answer was hell look at it an maybe .... same problems I have loading it , i got it run as a upload replacing EWBF's CUDA Zcash miner an run with no stats couldn't get it to run any other way with Awesome .. even using Generic miner..

I do get many requests for features and mining software, and I try to implement the most requested features.

Are you using the exact same command line arguments for the Generic Miner in Awesome Miner, as you use when manually launching the DTSM miner? Any output in if you use the Diagnostics button in the toolbar?

That's just it, i'm not even getting ZM to launch via Awesome Miner. Do i have to enter all the command line options, filled out with the information entirely (like server/pool, workername etc)? How would that work if I want Awesome Miner to pass the information based on which coin I want to mine via Profit Switching? The documentation around importing custom mining software is lacking IMO, any resources you can point me to that have more detailed information?

download DTSM miners @ https://drive.google.com/file/d/1Zmq6ZuOStO-bNjK-4XKacKpe66hk1Qwt/edit unzip it .

Set up a Managed miner,if you don't know how to follow the help me here http://www.awesomeminer.com/help/managedwizard.aspx then

Highlight the managed miner you want to use with DTSM miners then right click it, click Properties, sense the miner can only use the Eqihash Algorithm set it to Eqihash for Algorithm then under software set that to either EWBF CUda Zcash miner or Generic miner for now we will use EWBF CUda Zcash miner to get it started .... for path check mark Specify existing installation path .. for path you can find the software miners two ways either use the Browse button or use the upload custom software at the top under tools in the main awesome miner window, find the DTSM miner folder and open it then click on the zm.exe then under mining pools  you should have pools set up with your managed miner pick one it will only use pools that can mine coins from the Eqihash algorithm or Zcash type coins ....hit ok .. then right click the miner you just set up to use DTSM miners in the main AM window and hit start .. it should start mining with no states with Awesome miner that's because DTSM miners has Java for api access while awesome miner only uses API for api Access, if that's makes sense ....

and for DTSM miner to work you also might need this https://www.microsoft.com/en-us/download/details.aspx?id=48145

I did try with Generic miner but got a pop up error about it might be the wrong miner and you can add command lines for Generic miner by right clicking the managed miner you just set up to use DTSM miner then under mining engine for soft ware pick the Generic miner from the list ...but this time you might need to start it with bat file commands

some thing like this

zm --server your pool  --port that pools port --user your user for that pool

in the bat file area listed under add command lines on the left hand side bar there is a list with links after you click  Properties  click add command lines . can't say for sure sense i do have it working as i type as a replacement miner for EWBF CUda Zcash miner, i did it the way i posted above but sense i can't see any stats at all unless i look at the black screen UI  it mines in, I will stay with EWBF CUda Zcash miner for now ... Btw that's the same way it will work with Generic miner if you get it working with Generic miner with no states an basic features/function...you may be able to add it as a custom software miner if it has the right APi access which right now AM doesn't support Java API and i bet that can be a bitch to put in, so i don't blame Patrike if he doesn't do it right now ...

and Patrike here is the Diagnostics report you asked for using Generic miner, I'll be honest i have no plans to use  DTSM miners unless it's added as one of the main software miners, so i won't brother trying to get it to work with Generic miner,i know why it won't an I can get it to work with Generic miner or know how to  but sense i got it working as a replacement for EWBF's CUDA Zcash miner, no need to, so all good but will help TS auto switching with pools on a timer not using profit switching, if you need it ...

Code:

Starting Diagnostics
Starting Mining Software
Setting up Miner Engine. Instance: 1
Engine Type: GenericMiner, Auto Download: False, EnginePath: C:\Users\Administrator\Desktop\zm_0.5.5_win\zm_0.5.5_win\zm.exe, Subtype: Disabled, CustomExecutable:
Added rule for: C:\Users\Administrator\Desktop\zm_0.5.5_win\zm_0.5.5_win\zm.exe
C:\Users\Administrator\Desktop\zm_0.5.5_win\zm_0.5.5_win\zm.exe    (WindowMode: ConsoleFormat, EngineType: GenericMiner, IsProfitMiner: False)
Configuration:

> ZM 0.5.5, dstm's ZCASH/Equihash Cuda Miner
>
> Usage:
>  zm --server hostname --port port_nr --user user_name
>     [--pass password] [options]...
>
>  Stratum:
>     --server         Stratum server hostname
>                      prefix hostname with 'ssl://' for encrypted
>                      connections - e.g. ssl://mypool.com
>     --port           Stratum server port number
>     --user           Username / Workername
>     --pass           Worker password
>
>  Options:
>     --help           Print this help
>     --dev            Space separated list of cuda devices
>     --list-devices   List available cuda devices
>     --time           Enable output of timestamps
>     --logfile        [=path] Append logs to the file named by 'path'
>                      If 'path' is not given append to 'zm.log' in
>                      current working directory.
>     --noreconnect    Disable automatic reconnection on network errors.
>
>     --temp-target    In C - If set, enables temperature controller.
>                      The workload of each GPU will be continuously
>                      adjusted such that the temperature stays around
>                      this value. It is recommended to set your fan speed
>                      to 100% when using this setting.
>
>     --telemetry      [=ip:port]. Starts telemetry server. Telemetry data
>                      can be accessed using a web browser(http) or by json-rpc.
>                      If no arguments are given the server listens on
>                      127.0.0.1:2222 - Example: --telemetry=0.0.0.0:2222
>                      Valid port range [1025-65535]
>  Example:
>     zm --server servername.com --port 1234 --user username
Failed to start miner process: Process has exited, so the requested information is not available.
Failed to start miner in Diagnostics mode
Diagnostics completed

[s3c70r]

Hi Patrike,

When this happens :



it leads to this issue :



Miner doesn't gets restarted as AwesomeMiner did not detect the crash.

Offline rules don't do anything, it just stays offline like this forever.