[Awesome Miner] - Powerful Windows GUI to manage and monitor up to 200000 miners

[arganazmaster]

Hi,
Want to report a small bug on premium edition...
Cant save more than 1 GPU settings at same time, although on the web page says one can save several GPU settings, as per annexed image.
https://imgur.com/a/pQ0MT

Am I doing something wrong? I select both cards and go to button "profile" and select "save as..."

Thanks,

[miner14]

Two identical machines
Even hash rates are within a few MH/s

And yet AMiner, decides to put one on Lara2 for days while the other switches to most profitable as intended

https://i.imgur.com/t8gF99T.jpg

The updated online services show lara as most profitable - but how can it be when the identical set up on the right shows it further down.

The whole software is one big mess as far as I can make out.
How can two identical machines, cards, hashrates, miners, pools everything be showing different profits and mining different alogs.
I'd expect some shenanigans but it's more likely to be incompetence.

Not sure if it's even worth my time trouble shooting going on the past 20 pages of this thread.
But I did reinstall latest miner on both - delete and redo the miners. rerun the benchmarks and yet this still occurs.

So just a heads up - you could very likely be chucking money away, unless you have two machines to check what this software is doing.

Later, and mine safley.

I have the same problem, with 2 identical machines with identical GPUs and with identical statistics settings (refresh time is 2 minutes and whattomine selected) looks exactly like in your picture, with very big difference from one rig to the other, and the difference is very big, like 50% more for a different pool. It is strange and not logical.

Also everyone must check real hash rate recorded by the pool and also actual payment because it is a very big difference in the amount you are being paid (you get a lot less, and your hash power goes somewhere) compared to what you see in HashRate in AwesomeMiner (not talking about dolars that you can say it depends on exchage rate when converted, I am talkign about constant hasrate that varies less than 1% in 24 hours and you see it going down a lot on pool recordings.

What do you think, patrike about the 2 issues from above ?

Re Patricks post, yes both on the same time rates and when looking at miner details they showed several days of the totally wrong hash rates being pulled from ahashpool, resulting in miner wasting my time on low profit coins.

I just hand no confidence at all in this software switching, I could use it for single coins but I'd rather just use a batch script for that. So instead of labouring the point and trying to find the issue wasting both our time I'll just move on and use something else.
Good luck with it, I'm sure it's ok when it works correctly, but it's just a constant source of frustration for me,
Reminds me of Calibre ebook management, where its all programer, and no thought to user interface or design.
Laters, and enjoy your mining.

[constantlm]

Hi there,

Hopefully this is the correct place to raise this. When running benchmarks, I'm getting expected results for eth hashing on my RX580 (around 29mH/s - https://imgur.com/a/RrsGO). However, when running the actual miner this drops down to 20mH/s. I also can't get temp and such to show. (https://imgur.com/a/P1DVT)

I'm on the standard version on Windows 7 SP1, and I'm using AMD Crimson 17.10.2 drivers.

UPDATE: After further investigation, it looks like the hashing is as it should be when using Nicehash pools, but when using MiningPoolHub it drops to 20mH/s.

Any help would be great.

Thanks!

[wildzer0]

Just a short update to my problem adding PHI1612: It works now. I wrote "ahashpool:8333" instead of "ahashpool.com:8333" in the user-defined online services section.

Would be nice if Awesome Miner would output an error message if it can't contact a domain listed there (for example, in the View Details view it could display: PHI1612 (Error: Can't contact host xxx to determine profit).

[malinois]

Quick question... I currently run three mining rigs. Each one has the full install of Awesome Miner running on it. I monitor it all through the cloud site from my laptop. If needed for something I log into the individual rigs using a remote desktop application. Everything works great and I find the software amazing.

What I am wondering is if I am doing this the most efficient way. I see there is a "remote agent" for download as well. How does this remote agent work and would it be somehow better for me to use that? Thanks.

[NetfetMiningCompany]

It would cut out the need for a dashboard on each PC. You will just need 1 main PC to control all of them. This will need upgrades. Not sure if you are running free or not.

[malinois]

It would cut out the need for a dashboard on each PC. You will just need 1 main PC to control all of them. This will need upgrades. Not sure if you are running free or not.

I purchased it. Will the controlling PC need to be on the same network? For example, if I had the remote agent on all three rigs and the full version on my laptop, would that control it? If it will control it from the laptop will it only work when I am on the home network or also if I am somewhere else with internet connection? Thanks

[carlosmp]

It needs to be visible on the network in order to switch the agents/workers.  The miner will keep mining if it disconnects, it just won't switch if it loses connection to the laptop. 

HTH,
Carlos.

[puch0021]

I would be nice if in the "online services" tab it had "Enabled Services" and "Displayed Services"

Then you could have a column which showed if that pool/algo was enabled.


I like to disable / limit the number of pools so it does not switch as much, but i'm also interested what those pools are saying their profit is.


https://i.imgur.com/0VcLkxO.png

Piggybacking off this suggestion - it would be great to have an additional column to be able to display both revenue (current) and revenue 24 hour.

[malinois]

It needs to be visible on the network in order to switch the agents/workers.  The miner will keep mining if it disconnects, it just won't switch if it loses connection to the laptop. 

HTH,
Carlos.

OK, thank you. I think I will just keep it the way I am doing it now with full installs on each.

[cashen]

I would be nice if in the "online services" tab it had "Enabled Services" and "Displayed Services"

Then you could have a column which showed if that pool/algo was enabled.


I like to disable / limit the number of pools so it does not switch as much, but i'm also interested what those pools are saying their profit is.

Piggybacking off this suggestion - it would be great to have an additional column to be able to display both revenue (current) and revenue 24 hour.

I second the Current & 24 hour.

[chillware]

@Patrike - Feature Suggestion

Can you add logic to detect when the currently mining coin/algo has dropped X% below whatever is currently at the top of the profit list? I have 30 min switching setup, but often coins/algo's are only profitable for a few minutes then drop waaaaaaaaay down the list, mining unprofitably for most of the time. It would be AWESOME for AwesomeMiner to detect this automatically and initiate a switch.

Thank you!

[jabchest]

Do you plan to support Dragonmint once it's released?

[iceTony]

Hello. cant see interface "Interface offline" Can anyone help me, i will pay

Telegram @Nebemires

[Dalba]

Hello Patrike,
I noticed something a little annoying regarding coins statistics. If i set AM to use 24h average statistics to decide what to mine, then the price of coins displayed in the bottom bar change to an average price on the last 24h too.
Would it be possible to have the coins listed in bottom bar to always list the current price even if i use 24h average for profit switching ?

That's a good point. This will consider making this change.

Hello Patrike,
Just for remember, could you please look at this small issue regarding statistics ?

I have a note about this already, so it has not been forgotten. I'm simply getting a very large number of questions and feature requests these days, so some feature request will take a little time to get implemented. I do however appreciate all feedback and comments, so let's continue working together on making the software even better. Thanks!

I'm very happy with AM as it is now, so if we can help make the program even better, i'll be even happier ! In this way, could you please give possibility to override profit switching in the profit profile group window too ? The one we can see below :

http://www.hostingpics.net/viewer.php?id=462130Rigpool.jpg

As you can see in the picture, i like to define a profit switching profile for each type of graphic card i own. As my rigs have different type of graphic cards, i then define a profit group to define my rigs. This way each rig has very accurate statistics regarding hashrates and profits. So in my case it would be better to be able to override profit switching settings at profit group level.

[sergw]

regarding "Progress field" of miners Tab customization:

1) how may convert status.SecondsSinceStart to hours/days/month, do you support complex conditions like:
 if SecondsSinceStart < (60*5): show as seconds
else if SecondsSinceStart < (3600*3): show as minutes
else if SecondsSinceStart < (3600*24*3): show as hours
else if SecondsSinceStart < (3600*24*90): show as days
else : show as months

Basically the same way as you show Uptime in Status Field, or the way to show Uptime in Status in "Compact List" mode?

2) Is there a way to customize Speed Tab? say use different colors for speed value (yellow if less 10TH, red if less 5 TH)

[ruplikminer]

Hi,

i need support. When I use ZPOOL I get this error message:

http://prntscr.com/i1sb1t

How can I fix it?

thanks!

[spinter]

Hi,

i need support. When I use ZPOOL I get this error message:

http://prntscr.com/i1sb1t

How can I fix it?

thanks!

CUDA VERSION 7.5

[ruplikminer]

Hi,

i need support. When I use ZPOOL I get this error message:

http://prntscr.com/i1sb1t

How can I fix it?

thanks!

CUDA VERSION 7.5

Amazing thanks!!!!!!

Will this lower the perfromances with the other engines/algo?

[Thekingace]

Is it possible to mine Neoscrypt with AMD gpus on the profit managed miner? I can't seem to get it to work.