[Awesome Miner] - Powerful Windows GUI to manage and monitor up to 200000 miners

[C-L-O]

Hello everyone,

is there a way to create a notification when the fan speed of a gpu is greater that a certain value ?

It seems that there is a way to create a rule when the fan speed is lower than a certain value,
and but no way to create a trigger based on a "greater than" value for the fan speed.
It's unfortunate, because for me, it is at least as important as "lower than".

Is that a future feature ?

[dornmasse]

Hi, I have several external miners connected through VPN.
Awesome miner works perfectly with L3+, but with S9 every couple of minutes it shows disconnected status (and then connected again). I switched on option "ping up external miners", so it
also shows "pinging up" status as well. It all looks like christmas tree (it connects and disconnects every 2 minutes), and because of all that permanent disconnections I can't make some rules work.
Is there a solution how to work it out? I guess if awesomeminer has that option "ping up external miners" it could be kind of typical situation. Thanks

[Neat]

Hello,

I'm unable to start the program and getting failed to start miner process message.

And here is the Diagnostics output below,

Starting Diagnostics. Awesome Miner version: 4.5
Starting Mining Software
Setting up Miner Engine. Instance: 1
Engine Type: CcMiner, Auto Download: False, EnginePath: C:\Users\Revix\AppData\Local\AwesomeMiner\ccminer-x64-2.2.3-cuda9, Subtype: Disabled, CustomExecutable:
Added rule for: C:\Users\Revix\AppData\Local\AwesomeMiner\ccminer-x64-2.2.3-cuda9
C:\Users\Revix\AppData\Local\AwesomeMiner\ccminer-x64-2.2.3-cuda9  -a tribus -o stratum+tcp://mine.zergpool.com:8533 -u 12Dk2RFrERz7wUYFgJ1eFpETopRF1yxAnm -p c=BTC -b 0.0.0.0:4028   (WindowMode: ConsoleFormat, EngineType: CcMiner, IsProfitMiner: True)
Configuration:

Failed to start miner process: Access is denied
Failed to start miner in Diagnostics mode
Diagnostics completed

Any help would be appreciated.

[eminer001]

Hello,

I'm unable to start the program and getting failed to start miner process message.

And here is the Diagnostics output below,

Starting Diagnostics. Awesome Miner version: 4.5
Starting Mining Software
Setting up Miner Engine. Instance: 1
Engine Type: CcMiner, Auto Download: False, EnginePath: C:\Users\Revix\AppData\Local\AwesomeMiner\ccminer-x64-2.2.3-cuda9, Subtype: Disabled, CustomExecutable:
Added rule for: C:\Users\Revix\AppData\Local\AwesomeMiner\ccminer-x64-2.2.3-cuda9
C:\Users\Revix\AppData\Local\AwesomeMiner\ccminer-x64-2.2.3-cuda9  -a tribus -o stratum+tcp://mine.zergpool.com:8533 -u 12Dk2RFrERz7wUYFgJ1eFpETopRF1yxAnm -p c=BTC -b 0.0.0.0:4028   (WindowMode: ConsoleFormat, EngineType: CcMiner, IsProfitMiner: True)
Configuration:

Failed to start miner process: Access is denied
Failed to start miner in Diagnostics mode
Diagnostics completed

Any help would be appreciated.

Most probably it is from Windows Defender or other antivirus you have installed on your computer that blocks mining programs.

[patrike]

ALL Online service Algo keccakc calutate profit wong

If you add a custom algorithm not included in Awesome Miner, you may also need to adjust the profit factor when you add it as an online service. Awesome Miner doesn't know if the unit of reporting is MH/s or GH/s for example, as the pool API's doesn't include this information. Please go to Options dialog, Online Services and edit the entries and set profit factor to either 0.001 or 1000 depending on how you need to adjust it.

[patrike]

Patrike,

Is there a way to change all the zerg names?  they have changed their name to mine too per their webpage and all of them need to be updated.

Awesome Miner should already be using mine.zergpool.com. In the new development release I will also include a Region setting for US/EU for zergpool. Are there any other changes required?

[patrike]

Hello everyone,

is there a way to create a notification when the fan speed of a gpu is greater that a certain value ?

It seems that there is a way to create a rule when the fan speed is lower than a certain value,
and but no way to create a trigger based on a "greater than" value for the fan speed.
It's unfortunate, because for me, it is at least as important as "lower than".

Is that a future feature ?

Thanks for your feedback. I've noted your request.

[patrike]

Hi, I have several external miners connected through VPN.
Awesome miner works perfectly with L3+, but with S9 every couple of minutes it shows disconnected status (and then connected again). I switched on option "ping up external miners", so it
also shows "pinging up" status as well. It all looks like christmas tree (it connects and disconnects every 2 minutes), and because of all that permanent disconnections I can't make some rules work.
Is there a solution how to work it out? I guess if awesomeminer has that option "ping up external miners" it could be kind of typical situation. Thanks

Hi,

By default Awesome Miner will only wait for 3 seconds for the ASIC miner to respond to the monitoring requests. Depending on network connectivity and other factors, you may have to increase this to not get "Disconnected" too often. Please go to the Options dialog, Advanced section, and increase the "Miner API connection timeout".

[patrike]

Awesome Miner Version 4.5.2 (Development preview of 4.6)
- Custom Online Services can be added to support any Yiimp compatible pools
- Remote Proxy concept introduced to support very large scale mining operations
- The Change Pool and Add Pool menus are redesigned to include a searchable pool selection dialog, to support a larger number of pools.
- The Add Pool operation is added to the main toolbar and can be performed on all selected External Miners
- Improved batch command execution to allow execution when a miner is starting or stopping, for both Managed Miners and per algorithm for Profit Profiles
- Improved context menus and change detection for the Pool Balance feature
- Number of active miners at Yiimp compatible pools displayed in the Online Services tab
- Indonesian Rupiah added as display currency
- Updates to Mining Dutch port numbers to avoid low difficulty ports by default
- Zergpool settings for the profit switcher has been updated to include selection of region (EU or US)
- Claymore Dual Ethereum Miner 11.3
- PhoenixMiner 2.7c
- XMRig miner 2.4.5
- Correction to benchmarking of Excavator miner
- Correction to Ignore GPU feature for the MSI Afterburner integration
- Correction to display of pool balance where the coin is unknown
- Correction to profit switcher for disabled algorithms and custom pools
- Minor corrections

Items in blue are new since the previous development release a few days ago.

Development versions are intended for users that want to try the latest features before they are made available in the official releases. Development versions are not intended to be deployed at large scale as they have not been tested as much as the official releases. Please make sure that both Awesome Miner and Remote Agent uses the save version. Also note that one upgraded to a development preview, it isn't possible to downgrade to an older version.

To get access to development versions, open the Options dialog in Awesome Miner. In the General section, enable Check for development versions. Then go to the Menu and click Check for updates

Direct download links if needed:
http://www.awesomeminer.com/download/setupdev/AwesomeMiner.msi
http://www.awesomeminer.com/download/setupdev/AwesomeMinerRemoteService.msi

[ArcticUK]

Hi,

Is there a way to activate a saved MSI Afterburner profile when mining a particular coin/algorithm? I know I can set power, mem and clock settings from AM but the Voltage tweaked profiles would be so much better.

Thanks

[MinLum]

I'm trying to find a way to get AM to only mine using 3 out of 6 GPUs?  I'm hoping to run some tests with GPUs 1-3 running on NH and GPUs 4-6 running AM.  Is this possible on the free edition of AM?  If not, which paid version supports this?

Thanks!

[akadamson]

I'm trying to find a way to get AM to only mine using 3 out of 6 GPUs?  I'm hoping to run some tests with GPUs 1-3 running on NH and GPUs 4-6 running AM.  Is this possible on the free edition of AM?  If not, which paid version supports this?

Thanks!

depends on the miner, but just create 2 miners and add the command line option to use x,y,z cards on one miner and 1,2,3 on the other

There may be a more elegant way to do it as well, but the above should work I think

[MinLum]

depends on the miner, but just create 2 miners and add the command line option to use x,y,z cards on one miner and 1,2,3 on the other

There may be a more elegant way to do it as well, but the above should work I think

Not sure how to implement your suggestion on AM, really.  In NiceHash, I expect to just un-tick the GPUs and they will not be used, but I cannot find how to do the same in AM

[somaton]

i have 3 nvidia rigs, all of them had AM 4.5. Updated 2 of them to 4.5.2 to test this new version. In both rigs with 4.5.2 it is not possible to edit location of miner .exe, because Configure button is disabled. It is there: Profit profiles -> nVidia GPU -> Edit, select any miner software on left and you can  see grayed out "Configure..." button. Once 4.5.2 just crashed when i was benchmarking Excavator (Latest).

[kitenski]

Can anyone suggest why a rig with a single 1050 is seemingly performing better than a rig with a 1060 & 1050 in it?

In the pic below Garage has the single 1050 and Dell has the dual GPUs but is giving less revenue!

https://i.imgur.com/jme13Ds.jpg

[soothaa]

AwesomeMiner Coin Updater 0.5 (Requires AwesomeMiner 4.5 Release)

• Added support for Graviex Exchange
• Added support for cryptohub.online Exchange
• Fixed an issue with changes from Stocks.Exchange (or tradesatoshi.. can't remember)
• General improvements/clarifications in the console

https://bitcointalk.org/index.php?topic=2979494.0

[spinlock]

Hi folks,

I hope this is the right place to ask this question, so if not, I would appreciate any direction.

I bought a Premium license for AwesomeMiner yesterday.  I used Options | Registration to enter my email and the key I received via email.  I clicked the Verify button, and all looked fine.

But when I go to Options | Web, I CANNOT enable the API  - it's greyed out and inactive.  I've restarted AM, rebooted, no luck.

I bought the premium licenses specifically for API access, so this is a major issue for me.  Any help would be greatly appreciated!

Thanks,

ws

[Nexillus]

So a question I have that someone maybe able to help on.

Recently, I have had two rigs where the ZEC process just freezes and crashes. Awesome miner does not kill the process or restart it. I have to manually close it and then Awesome Miner restarts the process.

Thank you for the help!

[MinLum]

I need to add the dev=0,1,2 option to the DSTM miner in AM but I have tried with no success to get AM to pass this option forward.  I've even tried going into the actual miner folder (C:\Users\[user]\AppData\Local\AwesomeMiner\zm_0.6_win_2\zm_0.6_win)and edit the zm.cfg file but it is ignored when AM starts up the DSTM miner.  Any help appreciated!

[Nexillus]

I need to add the dev=0,1,2 option to the DSTM miner in AM but I have tried with no success to get AM to pass this option forward.  I've even tried going into the actual miner folder (C:\Users\[user]\AppData\Local\AwesomeMiner\zm_0.6_win_2\zm_0.6_win)and edit the zm.cfg file but it is ignored when AM starts up the DSTM miner.  Any help appreciated!

I believe you can pass custom command arguments to the miner via the options within each miner on AM. I can verify the exact location once I am home.