[Awesome Miner] - Powerful Windows GUI to manage and monitor up to 200000 miners

[Iwtym]

Hi, seems the profit switcher is lightly off , most of the time it is not routing my d3 and l3+ to the most profitable coin.  I have the profit switcher set to 1 minute and statistics to two minutes.  I added all my coins to the custom json field anyways.

For example, the switcher will omit to switch to dash when mining me. It also barely switches to mooncoin  despite the high profitability.

I tried removing "failover only" and quota 0. 100% confirmed the pools do not switch. I let it run all day and it just sat there mining MUE. It switched the L3 from EMC2 to GMC once in the entire day.

[1713936888]

1713936888

[1713936888]

1713936888

[1713936888]

1713936888

[1713936888]

1713936888

[Iwtym]

Hi, seems the profit switcher is lightly off , most of the time it is not routing my d3 and l3+ to the most profitable coin.  I have the profit switcher set to 1 minute and statistics to two minutes.  I added all my coins to the custom json field anyways.

For example, the switcher will omit to switch to dash when mining me. It also barely switches to mooncoin  despite the high profitability.

I tried removing "failover only" and quota 0. 100% confirmed the pools do not switch. I let it run all day and it just sat there mining MUE. It switched the L3 from EMC2 to GMC once in the entire day.

Found the problem Patrike. The switcher does not switch above 3 pools. It stops switching when I add the 4th pool. I have an X11 group with 10+ pools. Can you look into that?

[whoisthismanoO]

If I would modify the Notification action configuration, to allow you to specify a custom "Target URL" and "HTTP Method" for Webhooks as part of the notification - I assume it would solve your scenario? So similar to how you can override the e-mail address in a notification you would be able to override some Webhook settings in a notification.

I think yes. It would be great! Thank you!

[patrike]

Awesome Miner Development Version 4.0.8 (preview of 4.1)

- Pool configuration via built-in web interface
- Pool permissions configurable per user group
- Notification operations available for non administrators via the built-in web interface, only operating on the notifications for the specific user
- New trigger to detect low device count for a miner, to find out when a GPU is missing
- New trigger to detect low fan speed, to find failing GPU fans
- Show more devices temperatures in the Status column
- Show Bitcoin values with more decimals when needed
- Added pool setting to ignore worker name specified on miner
- Set worker name and wallet address per Managed Profit Miner when using custom pools with the profit switcher
- Filter Online Services based on selection of Profit Profile
- Correction for Coinwarz API with SHA-256
- Corrections to the profit switcher

Please remember to upgrade the Remote Agents as well.

The get access to development versions, open the Options dialog in Awesome Miner. In the General section, enable Check for development versions. Then go to the Menu and click Check for updates

[patrike]

Hi, seems the profit switcher is lightly off , most of the time it is not routing my d3 and l3+ to the most profitable coin.  I have the profit switcher set to 1 minute and statistics to two minutes.  I added all my coins to the custom json field anyways.

For example, the switcher will omit to switch to dash when mining me. It also barely switches to mooncoin  despite the high profitability.

I tried removing "failover only" and quota 0. 100% confirmed the pools do not switch. I let it run all day and it just sat there mining MUE. It switched the L3 from EMC2 to GMC once in the entire day.

Found the problem Patrike. The switcher does not switch above 3 pools. It stops switching when I add the 4th pool. I have an X11 group with 10+ pools. Can you look into that?

Hi,

In the latest development version (see above), you can see the latest profit calculations for External Miners as well. Previously this feature was only available for Managed Profit Miners. Are the calculations correct when looking at this dialog:
http://www.awesomeminer.com/help/profitswitching.aspx#viewcalc

[patrike]

Hello Patrike,


I have noticed some issues that I would like to report to you:

1.- Upon boot, when Awesome Miner is loaded, it fires up the miner without waiting for the statistics information to be updated. This always results in the miner launching an algo or coin which was the most profitable when the computer was turned off but not anymore. It would be better for the program to wait until the information is updated before launching the miner.

2.- Custom algorithms can't be disabled. If you disable them, they are automatically enabled next time you open the profit profile.

3.- I am unable to get Awesome Miner to include algorithm "hmq1725" from Zpool. I added it exactly the same way I added all the other ones but for some unknown reason, it refuses to accept this one (it is there, but it is never shown in the "Online Services" tab).

4.- Its it possible for you to add other autoexchange pools (besides MPH and Zpool) as "Online Services"?

Thanks for your feedback. Some answers below:
2) I made a correction for this in the latest development release

3) So the algorithm is listed on the Algorithms section of the Options dialog, and the checkbox in front of it is checked as well?

4) I'm getting some requests for adding more pools, so that will happen in future releases.

[patrike]

Hi patrike,
i have another question, i'm trying to run benchmark but i have some problem, i had create a new profit switch profile

but when i click the benchmark button in the tools toolbar i can see only ccminer

ty
ciao

For some mining software, Awesome Miner must have pools defined for the profit switcher in order to run benchmarks.

A few things to check in the Options dialog
1) In the Algorithm section in the Options dialog, are all these algorithms checked (enabled)
2) On the Profit switching section in the the Options dialog, which services are enabled of Nicehash, zpool and Mining Pool Hub?
3) Have you disabled any pools/algorithms from the profit switcher in Options dialog, Online Services section?

[s3c70r]

I'm mining Ethash and Equihash depending on miningpoolhub profitability.

Is there a way to run some commands when the profit mining switcher switches mining engine ?

This way I could overclock/underclock the GPUs in a different manner depending on what is being mined.

[Iwtym]

Awesome Miner Development Version 4.0.8 (preview of 4.1)
- Added pool setting to ignore worker name specified on miner

THANK YOU!!!

In the latest development version (see above), you can see the latest profit calculations for External Miners as well. Previously this feature was only available for Managed Profit Miners. Are the calculations correct when looking at this dialog:
http://www.awesomeminer.com/help/profitswitching.aspx#viewcalc

Also, regarding the switching of ASIC. It just started working. The above fix resolved some "dead" pools I had. Perhaps dead pools prevented the calculation? The calculations are correct now and effectively switching.

[Iwtym]

Regarding balances.

I noticed you have built in support for chainz.cryptoID.info and it works quite well. I was wondering if you had support for others like iquidus. If so, can you give us an example of the URL I need to put in for balance to work?

Alternatively, can we have the option of pointing the program directly to the address' balance URL?

EDIT: Pools get removed from Antminer when the Antminer reboots. Is there a way to circumvent this?

[Chapster]

Thanks for your feedback. Some answers below:
2) I made a correction for this in the latest development release

Thank you!

3) So the algorithm is listed on the Algorithms section of the Options dialog, and the checkbox in front of it is checked as well?

Yes. Added to Algorithms, a checkbox in front of it, enabled inside the "Managed Software" dialog and with the proper command line argument, also enabled inside the Profit Profile.
Like I said I have added several others algorithms and it has picked them up without any issue. This one is the only one it refuses to do it.

4) I'm getting some requests for adding more pools, so that will happen in future releases.

It would probably be better to add support for the whole API of Yiimp alike pools so you don't have to individually add each pool.

[STSMiner]

Patrike,

Is it possible to offer a Standard Plus license option that sits between the Standard and Pro versions ?

6 miners
Built-in Web
Performance history

Do away with Antminer and SSH management for this licence.

Set the price for this licence to $45.00 / $50.00

Can you offer this as an option ?

[soundsticks]

How do I remote access using Awesome Miner remote service to view/control my machine if I'm away from my farm.

[tamerdagli]

How do I remote access using Awesome Miner remote service to view/control my machine if I'm away from my farm.

Just use remote desktop to your machine...

[Dalba]

Hello,
I have a quick question regarding profit and power cost. In options i set Euro as my currency. In Profile Switching menu, do i have to set power cost in Euro or in dollar ? That's quite confusing as tips indicate USD/kWh...

[Minerdude8]

I just had a dead board on one of my antminer D3, but it was quite hard noticing the problem at awesome miner, is it possible have it automatically marked in red when one machine is working substantial under its average hash rate?

[tf2addict]

If I still mined, I would use this. Too bad I can't make any money anymore, the difficulty is too high these days

From 2014, lol.

[Mikesol]

How do I remote access using Awesome Miner remote service to view/control my machine if I'm away from my farm.

Just use remote desktop to your machine...

Install Google Chrome browser and its Remote Desktop app, very easy to use and you can even monitor and control your rig from your phone.

[The_Immortal]

patrike, please add notifications of Telegram to your awesome program?

And... No linux support on agent side?... Serious?..

Thank you!

[soothaa]

And... No linux support on agent side?... Serious?..

It's written in C# .NET which doesn't run on Linux.. yet. .NET Core 2.0 was just released and looks extremely promising.