[Awesome Miner] - Powerful Windows GUI to manage and monitor up to 200000 miners

[omshree]

Can you support Innosilicon A5 miner? Thanx

[1714037549]

1714037549

[patrike]

On profit switching for external miners (antminers), what is the recommended switching interval(minutes)?

Granatgas shows $0 value for current profit(pool is alive but website is dead the last couple days), will the profit switcher still switch over if true value is higher than other pools?

It looks like Granatgas recently fails on all https request, which is used by Awesome Miner to get profit information from their web site. I will switch to http instead which is working fine.

[patrike]

Recently AwesomeMiner began to stop mining after switching to sgminer (I'm on AMDs). From logs it seems to try and restart it a few times, each time complaining about

 Process already closed

and

  No connection could be made because the target machine actively refused it 127.0.0.1:4028

and then it just gives up. Restart on offline detection didn't help.

From the logs, it doesn't try to switch back to other miners, like EthDcrMiner, it just keeps pounding at the Sgminer until it gives up. I am able to start Sgminer manually using the same command from the log and it works fine. Also I've seen it working fine before with AwesomeMiner. I've checked and Firewall isn't a problem. Access to sgminer.exe is allowed on all ports and I see it listening on 4028 when running.

I didn't find much on this on the net, so coming to the source. It goes down every day, with a 100% repro rate, so I'm loosing hours of mining. Any ideas? Here is the log snippet.

Can you use the Diagnostics button in the toolbar to get more output information from sgminer itself? It may give some hint about what is wrong. In general, Sgminer is the most difficult mining software to configure because it has so many parameters and they depend very much on the GPU's being used, making it difficult to give general recommendations.

All other mining software run stable on your system except Sgminer? What about if you try to disable the Neoscrypt algorithm, if it's only that one?

[patrike]

Hi, Patrick. the hashrefinery pool changed the percentage from 1% to 1.25%, does it need to change something in the settings to work on a more profitable pool?

You can enter any profitability factor in Options dialog, Online Services. This can be used to give higher or lower profit values to the pools.

[patrike]

How to hide my miner from Awesome Miner stats reading by IP?

Can you explain this request in more detail? For example from where should it be hidden? Thanks!

If I know the IP of miner, I can monitor its activity and profitability.
Can I somehow block the ability to view statistics of my miner so that no one else can see it using tools like Awesome Miner?
I want make it private, or disable.

The Antminer API can be configured to only allow connections from a specific IP address (for example only your computer running Awesome Miner). See the rules here:
http://www.awesomeminer.com/help/minerapi.aspx
And how to set it on an Antminer:
http://www.awesomeminer.com/help/antminerapi.aspx

One example of a rule could be the following, where only the computer with IP 192.168.0.123 can connect to the Antminer (and you always need the 127.0.0.1 rule):
W:192.168.0.123/32,W:127.0.0.1/32

[patrike]

Hi, Patrick. At me to you the request - whether it is possible to make in a benchmark at once for all cards, instead of on one card?

In most cases people have the serveral identical cards, so it's no use to benchmark all of them. If you have different cards types, the recommendation is also to have a profile for each card, so you save the benchmark results separately.

See this page for more information:
http://www.awesomeminer.com/help/benchmark.aspx

[patrike]

Hi Patrike

Please add the opportunity to block / unblock the mining of a certain coin in the "Coins Tab" list. Sometimes the statistic received from the online services is incorrect and at this point it would be convenient to ignore this coin in the "profit switching" until the correct data arrives. Recently, very often incorrect data come from InfluxCoin.

Regards

Hi,

The profit switcher is mining on the pools you have defined, not on any coin on the Coins tab. But I assume you have a pool for this specific coin and want to take it away for the moment? For a specific coin you the option to select in in the Coins tab and click Coin Properties in the toolbar to set a custom (for example much lower) profit factor. By setting a very low profit factor it will not be considered interesting by the profit switcher.

[patrike]

Can you support Innosilicon A5 miner? Thanx

Awesome Miner supports a few other Innosilicon miners. I don't know about A5 yet, but it will probably work fine. Do you have this miner already?

[patrike]

General information
Both zpool and Hash Refinery have some problems with their profit reporting. It's not a change in the API that Awesome Miner can adjust to, instead it's simply incorrect profit values listed on their site. It's just temporary according to this tweet from zpool:
https://twitter.com/_zpool_/status/933420168050552832

If you see super high profit values in Awesome Miner for some of these pools today, it will go away once they have resolved this issue.

[s3c70r]

Hi Patrike,

When this happens :

it leads to this issue :

Miner doesn't gets restarted as AwesomeMiner did not detect the crash.

Offline rules don't do anything, it just stays offline like this forever.

It's not a crash, but it should trigger the offline detection rule. It could probably be detected by the "Accept Progress" rule as well if enabled.

Can you please share some details of how the Offline Detection rule is configured? That will help me understand why it didn't work as expected. Thanks!

Here you go ! Not sure why even the hashrate 10min doesn't catch it ..

https://ibb.co/kNAWa6

[s3c70r]

Verium CPU mining support please !

I can mine but there is no coin support for it.

[dornmasse]

Hi, first of all, thanks for awesome software I use it mostly for ASIC Antminer monitoring, and I have a some question.

I made a rule, which reboots asic on trigger "chip failure". However if asic has a "chip failure" right after reboot, there is a infinite reboot.
Please give a tip of advice how to make rule with automatic reboot in case of critical failures but not more than 3 times in a row.

Thanks a lot.

[s3c70r]

Would you know why I see everything set to 0Mhz even if I can talk to MSI Remote Server ?

https://ibb.co/ipOzCm

[micwebnet]

Recently AwesomeMiner began to stop mining after switching to sgminer (I'm on AMDs). From logs it seems to try and restart it a few times, each time complaining about

 Process already closed

and

  No connection could be made because the target machine actively refused it 127.0.0.1:4028

and then it just gives up. Restart on offline detection didn't help.

From the logs, it doesn't try to switch back to other miners, like EthDcrMiner, it just keeps pounding at the Sgminer until it gives up. I am able to start Sgminer manually using the same command from the log and it works fine. Also I've seen it working fine before with AwesomeMiner. I've checked and Firewall isn't a problem. Access to sgminer.exe is allowed on all ports and I see it listening on 4028 when running.

I didn't find much on this on the net, so coming to the source. It goes down every day, with a 100% repro rate, so I'm loosing hours of mining. Any ideas? Here is the log snippet.

Can you use the Diagnostics button in the toolbar to get more output information from sgminer itself? It may give some hint about what is wrong. In general, Sgminer is the most difficult mining software to configure because it has so many parameters and they depend very much on the GPU's being used, making it difficult to give general recommendations.

All other mining software run stable on your system except Sgminer? What about if you try to disable the Neoscrypt algorithm, if it's only that one?

Yes, only Sgminer and Sgminer-GM. I disabled both in the AMD profit profile and the mining hasn't stopped ever since, but that defeats the purpose of profit switching. My cards are R9 290s and R9 Fury X. In both cases the same repro.

I've caught Sgminer crash process one one of the systems, but don't see similar crashes on other machines where AwesomeMiner just gave up. Here's what it logged:

Faulting application name: sgminer.exe, version: 0.0.0.0, time stamp: 0x001dc4e4
Faulting module name: amdocl64.dll, version: 22.19.685.0, time stamp: 0x59d6a487
Exception code: 0xc0000005
Fault offset: 0x000000000049e606
Faulting process id: 0x1d64
Faulting application start time: 0x01d3633675ea8bbb
Faulting application path: C:\Users\Michael\AppData\Local\AwesomeMiner\sgminer-gm-5.5.4_1\sgminer-gm\sgminer.exe
Faulting module path: C:\WINDOWS\System32\DriverStore\FileRepository\c0318724.inf_amd64_3e17b73ae627ea03\amdocl64.dll
Report Id: 0678aba1-075a-43b9-9b9d-c5d29519691d
Faulting package full name:
Faulting package-relative application ID:

Which looks like a one-off display driver induced bug (17.10.1 radeon drivers).

I think the root cause for this AwesomeMiner giving up is its inability to connect to port 4028 on localhost for Sgminer(-gm). I assume that's the control port it uses for manage all miners. It looks like sgminer process dies, and AwesomeMiner doesn't realize that and keeps trying to talk to it, instead of switching to another miner.

What would I be looking for in the Diagnostics log?

[SuperPants321]

How do I get SgMiner to work in AwesomeMiner? I have no issue with Claymore, but when I try to use SgMiner I get this error:

> [20:50:17] All devices disabled, cannot mine!
> [20:50:15] Started sgminer 5.5.4-gm                    
> [20:50:15] * using Jansson 2.7                    
> [20:50:15] Loaded configuration file awesome.conf                    
> [20:50:17] clDevicesNum returned error, no GPUs usable                    
> [20:50:17] All devices disabled, cannot mine!

This is on a 13 x RX570 rig. Using SgMiner in the NiceHash miner works fine.

[radiogen]

IS IT POSSIBLE TO ADD SUPPORT OF "dstm-zcash" MINER ?

[STSMiner]

IS IT POSSIBLE TO ADD SUPPORT OF "dstm-zcash" MINER ?

I can get this to work, but only by using it as a custom miner within Awesome Miner, the problem is Awesome Miner does not get any data back from the miner so no stats are displayed.

Patrike,

Below is the diagnostic output...  I hope you can fix / add this in Awesome Miner soon.



Starting Diagnostics
Starting Mining Software
Setting up Miner Engine. Instance: 2
Engine Type: 7, Auto Download: False, EnginePath: D:\NiceHashMiner\zm_0.5.5_win\zm.exe, Subtype: Disabled, CustomExecutable:
Added rule for: D:\NiceHashMiner\zm_0.5.5_win\zm.exe
D:\NiceHashMiner\zm_0.5.5_win\zm.exe  --server equihash.mine.zpool.ca --port 2142 --user <Removed> --pass c=BTC --api 0.0.0.0:4029   (WindowMode: ConsoleFormat, EngineType: 7, IsProfitMiner: True)
Configuration:

Mining Engine Process started, PID: 10476

====================================================================================================
> #  zm 0.5.5
> #  GPU0 + GeForce GTX 1070         MB: 8192 PCI: 1:0
> #  GPU1 + GeForce GTX 1070         MB: 8192 PCI: 8:0
>
> #  GPU0  connected to: equihash.mine.zpool.ca:2142
> #  GPU1  connected to: equihash.mine.zpool.ca:2142
> #  GPU0  server supports extranonce
> #  GPU1  server supports extranonce
> #  GPU0  server set difficulty to: 00002003e07c0f81f0000000...
> #  GPU1  server set difficulty to: 00002003e07c0f81f0000000...

====================================================================================================
Stopping miner process ...
Stopping Mining Software
> D:\NiceHashMiner\zm_0.5.5_win\zm.exe: unknown option -- api
Diagnostics completed

[dnyt]

The command is --telemetry=0.0.0.0:4029 instead of --api ...

Then you can query it via browser or json query.

It would take somebody from Awesome Miner, to add support for stats, patrike?
There is a sample json-rpc.txt file in the folder:

Request:
-->{"id":1, "method":"getstat"}

Response:
<--{
    "id": 1,
    "result": [{
        "gpu_id":          0,         // GPU CUDA id
        "temperature":     0,         // current GPU temperature
        "sol_ps":          0.00,      // current Sol/s
        "avg_sol_ps":      0.00,      // average Sol/s
        "sol_pw":          0.00,      // current Sol/s / Watt
        "avg_sol_pw":      0.00,      // average Sol/s / Watt
        "power_usage":     0.00,      // current power usage
        "avg_power_usage": 0.00,      // average power usage
        "accepted_shares": 0,         // total amount of accepted shares
        "rejected_shares": 0,         // total amount of rejected shares
        "latency":         0          // network latency
    }],

    "uptime":   0,                    // uptime in seconds
    "contime":  0,                    // connection time in seconds (gets reset on reconnect)
    "server":   "myserver.com",       // server name
    "port":     0000,                 // port
    "user":     "username",           // username
    "version":  "0.5.4",              // zm version
    "error":    null
}

IS IT POSSIBLE TO ADD SUPPORT OF "dstm-zcash" MINER ?

I can get this to work, but only by using it as a custom miner within Awesome Miner, the problem is Awesome Miner does not get any data back from the miner so no stats are displayed.

Patrike,

Below is the diagnostic output...  I hope you can fix / add this in Awesome Miner soon.



Starting Diagnostics
Starting Mining Software
Setting up Miner Engine. Instance: 2
Engine Type: 7, Auto Download: False, EnginePath: D:\NiceHashMiner\zm_0.5.5_win\zm.exe, Subtype: Disabled, CustomExecutable:
Added rule for: D:\NiceHashMiner\zm_0.5.5_win\zm.exe
D:\NiceHashMiner\zm_0.5.5_win\zm.exe  --server equihash.mine.zpool.ca --port 2142 --user <Removed> --pass c=BTC --api 0.0.0.0:4029   (WindowMode: ConsoleFormat, EngineType: 7, IsProfitMiner: True)
Configuration:

Mining Engine Process started, PID: 10476

====================================================================================================
> #  zm 0.5.5
> #  GPU0 + GeForce GTX 1070         MB: 8192 PCI: 1:0
> #  GPU1 + GeForce GTX 1070         MB: 8192 PCI: 8:0
>
> #  GPU0  connected to: equihash.mine.zpool.ca:2142
> #  GPU1  connected to: equihash.mine.zpool.ca:2142
> #  GPU0  server supports extranonce
> #  GPU1  server supports extranonce
> #  GPU0  server set difficulty to: 00002003e07c0f81f0000000...
> #  GPU1  server set difficulty to: 00002003e07c0f81f0000000...

====================================================================================================
Stopping miner process ...
Stopping Mining Software
> D:\NiceHashMiner\zm_0.5.5_win\zm.exe: unknown option -- api
Diagnostics completed

[anilffff]

nice information

[nu1mlock]

Is there a way to get Awesome Miner to mine three different coins on the game rig? Three different miner programs on the same rig (three algorithms on two GPU's each).