[Awesome Miner] - Powerful Windows GUI to manage and monitor up to 200000 miners

[patrike]

Hi Patrike
please add in your system this wonderful multipool service: d3pool.eu
Its realy good pool with low fees.

Thanks for the suggestion. I will try to find a good solution for supporting yiimp-based pools like this one in general, so any of these pools can be supported.

[1614326476]

1614326476

[1614326476]

1614326476

[1614326476]

1614326476

[1614326476]

1614326476

[Zaffor]

Installed new version of AM and added excavator. Benchmark runs fine but when I start the rig on multipool hub it seems to show several algos in blue with speeds all 0.00000

What did I do wrong?

I just learned that Excavator and Mining Pool Hub doesn't work together. After doing more research, it looks like the Excavator miner is explicitly blocking connections to Mining Pool Hub because of some disagreements between Nicehash and Mining Pool Hub.

I will have to implement something in Awesome Miner that prevents the profit switcher from selecting the combination of Excavator and MPH. For the moment, please disable one of them.

Thanks for the prompt response

Shame, Excavator is a good miner for Neo and a few others and I was going to try out Multipoolhub to see if it was any better than ahashpool. Will reconfigure Awesome to go back to KlausT and DSTM for npw.

[patrike]

Installed new version of AM and added excavator. Benchmark runs fine but when I start the rig on multipool hub it seems to show several algos in blue with speeds all 0.00000

What did I do wrong?

I just learned that Excavator and Mining Pool Hub doesn't work together. After doing more research, it looks like the Excavator miner is explicitly blocking connections to Mining Pool Hub because of some disagreements between Nicehash and Mining Pool Hub.

I will have to implement something in Awesome Miner that prevents the profit switcher from selecting the combination of Excavator and MPH. For the moment, please disable one of them.

Thanks for the prompt response

Shame, Excavator is a good miner for Neo and a few others and I was going to try out Multipoolhub to see if it was any better than ahashpool. Will reconfigure Awesome to go back to KlausT and DSTM for npw.

I’m exploring if there are other solutions around this.

[cashen]

Mine stops. Picture below.

Please make sure you select "Excavator (latest)". By the look of the command line, it looks like it was prepared for the old Excavator miner

I'm pretty sure it calling the latest version. 1.4.3a

I'll keeping messing around with it. Thanks for the quick response.

UPDATE

Not sure what I did wrong. I got it working.

Side Note, HSR is much faster for me. I have all  1060s now.

[yrk1957]

Mine stops. Picture below.

Please make sure you select "Excavator (latest)". By the look of the command line, it looks like it was prepared for the old Excavator miner

I'm pretty sure it calling the latest version. 1.4.3a

I'll keeping messing around with it. Thanks for the quick response.

Change 'Generic Miner" to "Excavator (Latest)".

[cashen]

Mine stops. Picture below.

Please make sure you select "Excavator (latest)". By the look of the command line, it looks like it was prepared for the old Excavator miner

I'm pretty sure it calling the latest version. 1.4.3a

I'll keeping messing around with it. Thanks for the quick response.

Change 'Generic Miner" to "Excavator (Latest)".

I didn't have it there. I had to add it. I think you're right thought and thats what did it.

[DumaxFr]

After activation of the disconnected pool feature, i wanted to add some "manual" pools in my current pool group.
But I can't figure out how is elected my "main" pool.
In pool group, i have 3 pools enabled to mine LUX coin + other pools on differents algos.
They appear in the following order : altminer, omegapool, yiimp.
I'm currently mining LUX (PHI1612) with ccminer 2.2.4 (NVIDIA).

Here is an extract of the log before and while profit switching :

Code:

10/02/2018 23:32:38.164 [023] [S]Profitability information:
  MiningPoolHub [Equihash], Url: stratum+tcp://europe.equihash-hub.miningpoolhub.com:17023, Profit: 0,000435629468392073, Priority: 0
  LUX omegapool [Luxcoin (LUX)], Url: stratum+tcp://omegapool.cc:8003, Profit: 0,000354745416248024, Priority: 0
  LUX yiimp.eu [Luxcoin (LUX)], Url: stratum+tcp://yiimp.eu:8333, Profit: 0,000354745416248024, Priority: 0
  LUX altminer.net [Luxcoin (LUX)], Url: stratum+tcp://eu1.altminer.net:11000, Profit: 0,000354745416248024, Priority: 0
  ZEC miningpoolhub [Zcash (ZEC)], Url: europe.equihash-hub.miningpoolhub.com:20570, Profit: 0,000336345959479845, Priority: 0
  ZCL miningpoolhub [Zclassic (ZCL)], Url: europe.equihash-hub.miningpoolhub.com:20575, Profit: 0,000333913463019581, Priority: 0

10/02/2018 23:42:38.340 [023] [S]Profitability information:
  LUX yiimp.eu [Luxcoin (LUX)], Url: stratum+tcp://yiimp.eu:8333, Profit: 0,000353680232150969, Priority: 0
  LUX omegapool [Luxcoin (LUX)], Url: stratum+tcp://omegapool.cc:8003, Profit: 0,000353680232150969, Priority: 0
  LUX altminer.net [Luxcoin (LUX)], Url: stratum+tcp://eu1.altminer.net:11000, Profit: 0,000353680232150969, Priority: 0
  ZEC miningpoolhub [Zcash (ZEC)], Url: europe.equihash-hub.miningpoolhub.com:20570, Profit: 0,000336397033044581, Priority: 0
  ZCL miningpoolhub [Zclassic (ZCL)], Url: europe.equihash-hub.miningpoolhub.com:20575, Profit: 0,000333668779143475, Priority: 0
  MiningPoolHub [Equihash], Url: stratum+tcp://europe.equihash-hub.miningpoolhub.com:17023, Profit: 0,000284502342642016, Priority: 0

Typically, i wanted to get altminer pool as main and then omegapool and yiimp as backup. But Yiimp seems to be the only one elected.
Is this possible with latest version of AM ?

Patrike, I saw you were eventually planning to manage yiimp clones. Will this include a profit factor per algo like MPH, NH and others ?
Or maybe a profit factor on every configured pool ? (This could act like a kind of priority management)

[yrk1957]

I didn't have it there. I had to add it. I think you're right thought and thats what did it.

Yeah, sometimes options don't show after upgrade. You need to fiddle a bit or start template/pool creation from scratch.

[leonikus]

Hello, In Awesome ver. 4.4.2 is not working DUAL mining Ethereum - it never turn on.
Always turn on work only in single mining mode.
In Awesome ver. 4.4.1 was worked OK.

[eminer001]

Hi Patrike
please add in your system this wonderful multipool service: d3pool.eu
Its realy good pool with low fees.

Thanks for the suggestion. I will try to find a good solution for supporting yiimp-based pools like this one in general, so any of these pools can be supported.

Would be a brilliant ideea to have the ability to add any yiimp based pool in an automatic way.

It is really needed to spread the huge number of AM users to various pools, maybe also having some more good ones there by default, because pools are not responsive when all AM users try to connect to the same pool at once because all AM users have the same statistics.

[Letitbebitcoins]

AM good service but it will be more better  .
Today is more new coin which isn't in coinwars or whattomine. I add new coin manually, but there is only static diff which I need change manually too.
All coins have API with dynamic diff changes. It is possible get dynamic diff via this
https://explorer.alqo.org/api/difficulty

Please add this features to coin properties.

[Pukerud]

Hello, In Awesome ver. 4.4.2 is not working DUAL mining Ethereum - it never turn on.
Always turn on work only in single mining mode.
In Awesome ver. 4.4.1 was worked OK.

Yeah the latest update broke dual mining. Benchmarked everything both eth only and dual.
But when mining is started it keeps showing uknown command.

https://i.imgur.com/6VH0HC8.png

[legendary13]

Hi Patrike
please add in your system this wonderful multipool service: d3pool.eu
Its realy good pool with low fees.

Thanks for the suggestion. I will try to find a good solution for supporting yiimp-based pools like this one in general, so any of these pools can be supported.

it would be great! So many new good pool yiimp based!

[Neo-Geo]

Future patch suggestion request:
Dark mode, for both Windows program and cloud/web services.

Examples:
YouTube's dark mode
CryptoCompare (turn lights off)
Already exists for one section of Awesome Miner: Windows application Dashboard when Dashboard chart isn't enabled.

I get why most web sites started out with black text on white backgrounds, because for centuries we were staring at black text printed on white paper. But when you're staring at 50+ watts of white light for more than a minute, it grows increasingly uncomfortable. And when you're in my situation and staring at multiple displays for most of the day, dark mode becomes a huge boon to your eyes, energy savings, reduced heat output, reduced stress and cortisol levels, etc. x1000.

Signed: Neo-Geo, Enterprise Edition + Cloud Services subscriber

[D3Pool]

Hi Patrike
please add in your system this wonderful multipool service: d3pool.eu
Its realy good pool with low fees.

Thanks for the suggestion. I will try to find a good solution for supporting yiimp-based pools like this one in general, so any of these pools can be supported.

Hello. Thank you for noticing. We would be very happy if we get listed into your program. If you need our developer team at any point we are opened for any help. If you need any modifications from our pool for example additional API requests or any kind of server based script we can make it work.

[patrike]

Awesome Miner version 4.4.3

- Improved compatibility for the Excavator mining software
- Improved support for running the PhoenixMiner software as user defined Managed Software using API compatibility with Claymore Ethereum miner
- Device profile configuration added for the new dual mining algorithms in Claymore Ethereum miner 11.0
- Correction to the profit switcher for selecting dual mining pools correctly

[GoRdiE]

Hi, how to enble secondary mining in excavator?

https://i.imgur.com/e3n4Z5q.jpg

https://i.imgur.com/7wUsfTr.jpg

[iceman2k2]

Awesome Miner version 4.4.3

- Improved compatibility for the Excavator mining software
- Improved support for running the PhoenixMiner software as user defined Managed Software using API compatibility with Claymore Ethereum miner
- Device profile configuration added for the new dual mining algorithms in Claymore Ethereum miner 11.0
- Correction to the profit switcher for selecting dual mining pools correctly

Just installed and updated remote agents.
When it tries to start claymore cant find on remote miners.
Is there anything i have to do to push new software on the remote miners?

[wildzer0]

Awesome Miner version 4.4.3

- Improved compatibility for the Excavator mining software
- Improved support for running the PhoenixMiner software as user defined Managed Software using API compatibility with Claymore Ethereum miner
- Device profile configuration added for the new dual mining algorithms in Claymore Ethereum miner 11.0
- Correction to the profit switcher for selecting dual mining pools correctly

Can't benchmark any dual algorithms. I'm getting "No pools specified" every time. Benchmarking single Ethereum works.

EDIT: Also Excavator does some weird stuff. It seems to request jobs for every algorithm it supports. Part of the log:

Code:

[16:39:36][0x00002760][warning] net | Invalid job provided by the stratum server
[16:39:36][0x00002760][info] net | Connection lost! Reconnecting in 9 seconds
[16:39:36][0x000028c4][info] net | Connection lost! Reconnecting in 9 seconds
[16:39:37][0x00002760][info] net | Share #126 accepted
[16:39:39][0x000028c4][info] core | Device #0-0 speed: 1.267302 MH/s
[16:39:39][0x000028c4][info] core | Algorithm 'neoscrypt' total speed: 1.267302 MH/s
[16:39:39][0x000028c4][info] core | Algorithm 'neoscrypt' total speed: 0.000000 H/s
[16:39:39][0x000028c4][info] core | Algorithm 'neoscrypt' total speed: 0.000000 H/s
[16:39:39][0x000028c4][info] core | Algorithm 'keccak' total speed: 0.000000 H/s
[16:39:39][0x000028c4][info] core | Algorithm 'keccak' total speed: 0.000000 H/s
[16:39:39][0x000028c4][info] core | Algorithm 'keccak' total speed: 0.000000 H/s
[16:39:39][0x000028c4][info] core | Algorithm 'pascal' total speed: 0.000000 H/s
[16:39:39][0x000028c4][info] core | Algorithm 'sia' total speed: 0.000000 H/s
[16:39:39][0x000028c4][info] core | Algorithm 'sia' total speed: 0.000000 H/s
[16:39:40][0x000028c4][info] algo-neoscrypt | New job_0 '76f5', diff=0.00247192
[16:39:40][0x000028c4][info] algo-pascal | New job_0 '0000002963db40c6', diff=2
[16:39:42][0x000028c4][info] algo-keccak | New job_0 '18d', diff=16
[16:39:43][0x000028c4][info] algo-keccak | New job_0 '73e3', diff=2
[16:39:43][0x00002760][info] net | Share #127 accepted
[16:39:45][0x000028c4][info] net | Connecting to 34.196.248.45:17022 (34.196.248.45)
[16:39:45][0x000028c4][info] net | Connected!
[16:39:45][0x000028c4][info] algo-neoscrypt | New job_0 'de5', diff=0.03125

[STSMiner]

Awesome Miner version 4.4.3

- Improved compatibility for the Excavator mining software
- Improved support for running the PhoenixMiner software as user defined Managed Software using API compatibility with Claymore Ethereum miner
- Device profile configuration added for the new dual mining algorithms in Claymore Ethereum miner 11.0
- Correction to the profit switcher for selecting dual mining pools correctly

Patrike,

What's up with this ?

Why can I not get all the algo's to show up in the Online Services tab ?

https://1drv.ms/i/s!AoT9lvLcOWd_hWAzqwfXGosJAEY8

https://1drv.ms/i/s!AoT9lvLcOWd_hWEnhj6QE5NQD1gG

As you can see, I have over 20 algo's selected here and also have them selected in Options > Algorithms - but not all will show -- they all did before the update to 4.4.3.

I've Benchmarked them all as well.

Is there a setting that I've missed ?    If so, I can not find where !

I look forward to a fix - help on what I may have done wrong.