[Awesome Miner] - Powerful Windows GUI to manage and monitor up to 200000 miners

[moppidoo]

i try lot of sgminer version, but all sgminer work only with one gpu ( i have 5 gpu )

not AMD user myself, but check sgminer --help, my guess is something to do with --gpu-platform, or mapping.

[1714066724]

1714066724

[svedr]

i try lot of sgminer version, but all sgminer work only with one gpu ( i have 5 gpu )

not AMD user myself, but check sgminer --help, my guess is something to do with --gpu-platform, or mapping.

Thankyou.. I try --gpu-platform 1 , now work all 5 gpu, but hashrate is very low, jump from 500kHz to 700kHz

Here is my settings..... Can you help me ?
sgminer.exe -k lyra2z -o stratum+tcp://eu.bsod.pw:2159 -u GgXc......................vd -p c=GIN -I 21 --gpu-platform 1

[Marvell2]

who does hex XDNA show zero on profit details pages ?  I have it benchmarked but still see zero

[patrike]

Hi all, and thanks @patrike for the awesome program.

One question.

When performing a benchmark, miners appear and test in algorithms that are disabled. Before, this did not happen, I think. I leave you some captures. Why it can be? Is it a problem with my configuration? For example, the ccminer-krnlx-xevan is configured as compatibility mode full on ccminer. The algo Allium is enabled due to the compatibility with ccminer but in the configuration of the krlnx is disable. By performing the benchmark, it appears and attempts to perform it giving a logical error. And so with almost all the software. Which makes Bencmark very tedious. Am I performing a bad configuration?

If you run into this issue, please send me your log file and configuration file and I will be able to investigate in more detail. Thanks!

[patrike]

mkxminer is not for Lyra2z (GinCoin) 

who said for lyra2z? Read please ! Lyra2v2 (Lyra2rev2)

Thanks for the suggestion. From what I can see this software doesn't provide any monitoring API. The command line is however more or less compatible with ccminer.

[patrike]

@patrike

An improvement.

Replace the 'window hashrate save' by hasrate and save power and extend also to save the power. So we can update the profiles more completely (new hashrate and new power)

Good point. I will add support for this in the next release.

[patrike]

Found the setting included in the pool configuration...

Can this be added to the Pool Group configuration possibly?

[Maybe this is in the software already, but I did not see it.

I am looking for a scaling factor for the monthly revenue/profits.
In my case, there are 4 hours M-F that I do not mine.  So I would like the profit/revenue calculation for the month to allow for a scaling factor from 0 through 1 so that I can adjust for the missing hours per month (or for any other reason, does not really matter why actually).

So if I assume a month is 28 days, this equals 24*7*4=672 hours.  If I know I will lose 20 hours a week mining, that would be 80 hours not mined out of the 672.  I would then want to put in (672-80)/672 as my scaling factor for the calculation for the monthly revenue/profit figure.

Where I live, my power rates are one low rate for weekends, and 3 different rates for M-F.  So what I do is to calculate the average rate for the times I mine and put that into the cost of a KW/h.  Another option would maybe have a field that asks how many hours are mined each day which may result in a more accurate figure since the number of days in a month varies which would calculate the total hours per month and I would still have to use my own calculated power average.  Just a thought.


Thanks for an Awesome piece of software, top notch!]

The closest Awesome Miner has to offer here is the Profit factor you can set on a individual pool (Pool Properties, Advanced section). Specifying a value like 0,88 here would make all profit reporting for this pool lower, but this will apply to both the estimates for the day and for the month. Having this specified for only the month is a very specific scenario that isn't supported.

If needed, you can use the rule action "Set property" to schedule power cost changes depending on day and time.

[patrike]

I noticed when I have a string in the command line that when I switch between managed miner and managed profit miner once or twice that the command line item disappears.  Intended?

Some fields are updated on the miner when it's in profit switching mode, so when changing back to a Managed Miner all settings may not be kept. You can use the concept of Managed Templates to restore the Managed Miner properties to a saved state.

[patrike]

I'm still getting massive delays in the UI. I noticed that it's fine for the first minute or two after I open the program, and then gets progressively worse, usually to the point where i need to force terminate AM and start from scratch. There's definitely something weird going on, Ive tried performance mode, Ive tried turning off my rules, beyond that I'm not sure what can be causing these UI freezes.

Please get back to me with the log file and configuration file and I will investigate this in more detail. Thanks!

[patrike]

who does hex XDNA show zero on profit details pages ?  I have it benchmarked but still see zero

In the View Details dialog you can see the Profit hashrate for the pool/algorithm. Is this hashrate a non-zero value? If you go to the Coins tab and compare XDNA with the same hashrate, do you get a non-zero value?

[streaml1ne]

I've got a rule setup to start and stop a pair of miners when they cross a profit threshold, but for some reason the start rule never actually starts them.

Miner Profit, Greater than or equals 2.25 US Dollar per day

I've tried setting this to miner revenue and profile profit, neither seem to trigger a start, even when View Details shows greater than 2.25 profit per day.

Also sometimes it looks like the stop rule keeps triggering even if the miner is stopped in some kind of endless loop every 5-10 seconds. Not sure what that's about.

[patrike]

I've got a rule setup to start and stop a pair of miners when they cross a profit threshold, but for some reason the start rule never actually starts them.

Miner Profit, Greater than or equals 2.25 US Dollar per day

I've tried setting this to miner revenue and profile profit, neither seem to trigger a start, even when View Details shows greater than 2.25 profit per day.

Also sometimes it looks like the stop rule keeps triggering even if the miner is stopped in some kind of endless loop every 5-10 seconds. Not sure what that's about.

If the miner is stopped and you want to start it based on a profit value, you need to use the property "Profit Profile" instead of "Miner Profit", as the miner doesn't have any profit when stopped.

I just had another report on the issue with multiple triggering, when using the Revenue / Profit trigger. A correction will be included in the next release.

[Marvell2]

who does hex XDNA show zero on profit details pages ?  I have it benchmarked but still see zero

In the View Details dialog you can see the Profit hashrate for the pool/algorithm. Is this hashrate a non-zero value? If you go to the Coins tab and compare XDNA with the same hashrate, do you get a non-zero value?

looks like its working now

[darius510]

I'm still getting massive delays in the UI. I noticed that it's fine for the first minute or two after I open the program, and then gets progressively worse, usually to the point where i need to force terminate AM and start from scratch. There's definitely something weird going on, Ive tried performance mode, Ive tried turning off my rules, beyond that I'm not sure what can be causing these UI freezes.

Please get back to me with the log file and configuration file and I will investigate this in more detail. Thanks!

I sent you the log file a while ago, nothing in my configuration has changed since then.

[Allo-4ka]

patrike
There is an error in displaying the icons in the pools. The coin itself is registered and displayed correctly (see screenshot)
http://images2.imagebam.com/43/31/e2/7c8508957997064.png

as well as with recent updates (if not mistaken with 5.4) icons in
c:\Users\user\AppData\Roaming\AwesomeMiner\
have the lowest priority than those that are protected in the program itself

[toptek12]

SRBMiner Cryptonight AMD GPU Miner 1.6.7

 is out

https://bitcointalk.org/index.php?topic=3167363.0

ty  for the upload tool till you add it..

 I use it over Cast XMR only because the Fee and limits of setting up Cast XMR.  

Cast XMR 1.4.0 is out as well .

https://bitcointalk.org/index.php?topic=2256917.0


both give about the same speed while one charges a big 1.5 fee an the other ones fee is 0.85 in xmr mode .

Ive been asking lolMiner v0.43 to allow for Awesome miner support but it looks like, I'm being Ignored . sigh .

an the coin market is starting to pick up some and will now that the Summer is ending, i bet those who sold off there GPU's will be sorry at some point but won't admit it .

[patrike]

I'm still getting massive delays in the UI. I noticed that it's fine for the first minute or two after I open the program, and then gets progressively worse, usually to the point where i need to force terminate AM and start from scratch. There's definitely something weird going on, Ive tried performance mode, Ive tried turning off my rules, beyond that I'm not sure what can be causing these UI freezes.

Please get back to me with the log file and configuration file and I will investigate this in more detail. Thanks!

I sent you the log file a while ago, nothing in my configuration has changed since then.

Last time the profit switcher was a bit CPU heavy when using a large number of Profit profiles.

Version 5.4.3 will be released soon and includes even more optimizations to the performance and CPU load. Can you please upgrade to the latest version once available, and send me a new log file if you still run into this problem? You could also try to increase the profit switching interval to find out if the profit switcher is causing these issues. Thanks!

[patrike]

patrike
There is an error in displaying the icons in the pools. The coin itself is registered and displayed correctly (see screenshot)
http://images2.imagebam.com/43/31/e2/7c8508957997064.png

as well as with recent updates (if not mistaken with 5.4) icons in
c:\Users\user\AppData\Roaming\AwesomeMiner\
have the lowest priority than those that are protected in the program itself

Would it be even better if I simply removed the small coin icon and the large generic pool icon, and replaced it with only a large coin icon? So instead of two icons you would only have one, and that would be a larger icon for the specific coin?

I think that would make most sense as the generic pool icon doesn't give so much information. If anyone else also have feedback on this as well, please let me know. Thanks!

[patrike]

SRBMiner Cryptonight AMD GPU Miner 1.6.7

 is out

https://bitcointalk.org/index.php?topic=3167363.0

ty  for the upload tool till you add it..

 I use it over Cast XMR only because the Fee and limits of setting up Cast XMR.  

Cast XMR 1.4.0 is out as well .

https://bitcointalk.org/index.php?topic=2256917.0


both give about the same speed while one charges a big 1.5 fee an the other ones fee is 0.85 in xmr mode .

Ive been asking lolMiner v0.43 to allow for Awesome miner support but it looks like, I'm being Ignored . sigh .

an the coin market is starting to pick up some and will now that the Summer is ending, i bet those who sold off there GPU's will be sorry at some point but won't admit it .

Thanks for the update. I will include the updated miner versions in the next release of Awesome Miner.

[Allo-4ka]

Would it be even better if I simply removed the small coin icon and the large generic pool icon, and replaced it with only a large coin icon? So instead of two icons you would only have one, and that would be a larger icon for the specific coin?

I think this would be much more informative than the icon of the pool, which does not carry absolutely any information
Thanks again for AM and so quick responsiveness

New and current icons, as always available by reference 
https://yadi.sk/d/_2ZrfhxI3WoaXx