[Awesome Miner] - Powerful Windows GUI to manage and monitor up to 200000 miners

[buckts.74]

Hi folks, Is there any info on the StelliteV8 fork later today?
SRBminer 1.7.6 has the new stelliteV8 algo as supported, but it is not listed in the awesome miner algo list.

[1714004371]

1714004371

[1714004371]

1714004371

[1714004371]

1714004371

[1714004371]

1714004371

[O-Coin]

@Patrike

https://grin-tech.org/

Is this on list of implementation?

[darius510]

Zergpool has apparently risen from the dead. It would be great if you could re-enable native support for it, it has by far the best selection of coins to mine.

[Chevy_Roadster]

Zergpool has apparently risen from the dead. It would be great if you could re-enable native support for it, it has by far the best selection of coins to mine.

I second that!  Please add it back.  Thanks in advance

[johnnie18]

Hi,

I'm trying to update from 6.0.9 to 6.0.10 but it fails everytime.
Here is the log

Hi. Can you please try to reboot the system once? It's not too uncommon that pending Windows Updates are preventing MSI-based installers from running correctly.

Thx for support, I had a pending update, I rebooted twice but still the same issue, even with the 6.0.11 version. 

Thanks for the update. Can you please try to manually download and run the installer to upgrade to the latest development version?
Main application: https://www.awesomeminer.com/download/setupdev/AwesomeMiner.msi
Remote Agent: https://www.awesomeminer.com/download/setupdev/AwesomeMinerRemoteService.msi

Thank you very much for the information. This will help me a lot...

[Allo-4ka]

patrike

I stumbled upon a new universal block explorer, with a large amount of information collected by it, with API support coinexplorer.net
It can be used as an alternative to cryptoid.info

[patrike]

https://dl.dropboxusercontent.com/s/kaaxtoh0q3a56ai/Captura%20de%20pantalla%202019-01-15%20a%20las%2013.09.00.png

Hi again, everybody. I have another problem in another currency equihash

XSG, when mining it does not show me the profit, nor the coins per day. I have tried in different pools and I do not mark the profit when mining.

in the Coins tab it is output correctly and if it shows the daily gain estimate, but not when mining. In the catch you can see.

Let's see if there is some way to solve it by touching something in options. This is a community that helps a lot, it is a fantastic community.

Unless you have an exchange/volume filter that would cause this, it's a bit difficult to tell.

I've just implemented a feature to better troubleshoot this scenario. In the next release, you will be able to right click on the miner and select View Details. On the profit switching tab you will be able to double click on an entry (for example the line where XSG is listed) and get a dialog with more profit/revenue/coin details.

[patrike]

Hi folks, Is there any info on the StelliteV8 fork later today?
SRBminer 1.7.6 has the new stelliteV8 algo as supported, but it is not listed in the awesome miner algo list.

I will add this one to the next release.

[patrike]

@Patrike

https://grin-tech.org/

Is this on list of implementation?

Not yet, but I will keep an eye one this one.

[patrike]

Zergpool has apparently risen from the dead. It would be great if you could re-enable native support for it, it has by far the best selection of coins to mine.

I second that!  Please add it back.  Thanks in advance

Yes, Zergpool will be supported again. I was actually contacted by the Zergpool admin about this just two days ago.

[patrike]

patrike

I stumbled upon a new universal block explorer, with a large amount of information collected by it, with API support coinexplorer.net
It can be used as an alternative to cryptoid.info

Thanks for the suggestion. The API data format was quite easy so I just have to make a small change to Awesome Miner to support this Block Explorer as well.

In the next release you will be able to add Block Explorer URL's like below (where VTC is an example of coin to use):
https://www.coinexplorer.net/api/v1/VTC/address/balance?address=[address]

[trucobit]

https://dl.dropboxusercontent.com/s/kaaxtoh0q3a56ai/Captura%20de%20pantalla%202019-01-15%20a%20las%2013.09.00.png

Hi again, everybody. I have another problem in another currency equihash

XSG, when mining it does not show me the profit, nor the coins per day. I have tried in different pools and I do not mark the profit when mining.

in the Coins tab it is output correctly and if it shows the daily gain estimate, but not when mining. In the catch you can see.

Let's see if there is some way to solve it by touching something in options. This is a community that helps a lot, it is a fantastic community.

Unless you have an exchange/volume filter that would cause this, it's a bit difficult to tell.

I've just implemented a feature to better troubleshoot this scenario. In the next release, you will be able to right click on the miner and select View Details. On the profit switching tab you will be able to double click on an entry (for example the line where XSG is listed) and get a dialog with more profit/revenue/coin details.

Thank you as always for responding and being so active in the maintenance of your program.

I do not use the volume filter, the currency appears in bold letters, that is correct, but then when mining it, it simply does not tell me the profit or currency days. Other coins with the same miner there are no problems. IF the truth is something strange.

Hopefully in the next version is solved.

I take advantage of another small mistake. The selection of exchange, is the best function that has added in the last months, but sometimes it is not correct, I explain.

It usually works fine, but there are times, there are coins that indicate another exchange where they are, and I have the exchange activated in the list that you put, but when choosing another for example Cryptobridge, it remains gray and no longer Minaria, do not get the data from Cryptobridge, this is just an example. It is as if the data acquired by the Coinscalculator or coinstomine apis were wrong, or the array of the exchange had some failure. Very little happened, but it happens to me.

You do a great job, I'm impressed with how committed you are to your project, and I want you to know that I recommend it to everyone in my telegram group. The bad thing that then it's my turn to explain all things to them, but that does not matter to me. Today I think that if you take the cryptos seriously, you have to use this tool in a mandatory way.

[Allo-4ka]

patrike

New and update ICONS for CTM
https://yadi.sk/d/_2ZrfhxI3WoaXx

[buckts.74]

Hi folks, Is there any info on the StelliteV8 fork later today?
SRBminer 1.7.6 has the new stelliteV8 algo as supported, but it is not listed in the awesome miner algo list.

I will add this one to the next release.

Thank you Patrike, always appreciated

[baf28]

pls fix algo Cuckoo Cycle bminer, aeternity not correct.
Correct: cuckaroo29

Initialize diagnostics (2)
Starting Diagnostics. Awesome Miner version: 6.1.1
OS: Microsoft Windows 10 Pro 64-bit
nVidia driver version: 416.34
Microsoft VC++ 2013 runtime installed: Yes
Microsoft VC++ 2015 runtime installed: Yes
Starting Mining Software
Setting up Miner Engine. Instance: 1
Engine Type: 16, Auto Download: False, EnginePath: D:\Shara\Maйнинг\Miner Soft\bminer-v12.1.0-5083c32-CUDA-9.2\bminer.exe, Subtype: Disabled, CustomExecutable:
Properties: (WindowMode: ConsoleFormat, EngineType: 16, IsProfitMiner: False)
====================================================================================================
D:\Shara\Maйнинг\Miner Soft\bminer-v12.1.0-5083c32-CUDA-9.2\bminer.exe  -devices 0 -uri aeternity://baf.AsusPC50:x@eu-ru01.miningrigrentals.com:3322 -watchdog=false -api=0.0.0.0:4028
====================================================================================================
Mining Engine Process started, PID: 12120
> [INFO] [2019-01-17T11:45:20+06:00] Bminer: When Crypto-mining Made Fast (v12.1.0-5083c32)
> [INFO] [2019-01-17T11:45:20+06:00] Turning on experimental support for Aeternity mining
> [INFO] [2019-01-17T11:45:21+06:00] Watchdog has started.                        
> [INFO] [2019-01-17T11:45:21+06:00] Starting miner on 1 devices                  
> [INFO] [2019-01-17T11:45:21+06:00] Starting the management API at 0.0.0.0:4028  
> [FATA] [2019-01-17T11:45:21+06:00] Insufficient memory on device (0) to run the solver

====================================================================================================
Unexpected exit of mining software. Possible cause: Incorrect configuration or crashing software
Diagnostics completed

[patrike]

pls fix algo Cuckoo Cycle bminer, aeternity not correct.
Correct: cuckaroo29

Initialize diagnostics (2)
Starting Diagnostics. Awesome Miner version: 6.1.1
OS: Microsoft Windows 10 Pro 64-bit
nVidia driver version: 416.34
Microsoft VC++ 2013 runtime installed: Yes
Microsoft VC++ 2015 runtime installed: Yes
Starting Mining Software
Setting up Miner Engine. Instance: 1
Engine Type: 16, Auto Download: False, EnginePath: D:\Shara\Maйнинг\Miner Soft\bminer-v12.1.0-5083c32-CUDA-9.2\bminer.exe, Subtype: Disabled, CustomExecutable:
Properties: (WindowMode: ConsoleFormat, EngineType: 16, IsProfitMiner: False)
====================================================================================================
D:\Shara\Maйнинг\Miner Soft\bminer-v12.1.0-5083c32-CUDA-9.2\bminer.exe  -devices 0 -uri aeternity://baf.AsusPC50:x@eu-ru01.miningrigrentals.com:3322 -watchdog=false -api=0.0.0.0:4028
====================================================================================================
Mining Engine Process started, PID: 12120
> [INFO] [2019-01-17T11:45:20+06:00] Bminer: When Crypto-mining Made Fast (v12.1.0-5083c32)
> [INFO] [2019-01-17T11:45:20+06:00] Turning on experimental support for Aeternity mining
> [INFO] [2019-01-17T11:45:21+06:00] Watchdog has started.                        
> [INFO] [2019-01-17T11:45:21+06:00] Starting miner on 1 devices                  
> [INFO] [2019-01-17T11:45:21+06:00] Starting the management API at 0.0.0.0:4028  
> [FATA] [2019-01-17T11:45:21+06:00] Insufficient memory on device (0) to run the solver

====================================================================================================
Unexpected exit of mining software. Possible cause: Incorrect configuration or crashing software
Diagnostics completed

For Aeternity (Cuckoo Cycle), this should be correct.

If you are mining Grin, supported only in the very latest Bminer release, it uses some variation of Cuckoo Cycle that will require "cuckaroo29" as you point out.

I suppose this will be yet another algorithm to add. To make it even more complex it looks like Grin supports GPU mining via CuckaRoo29, but also ASIC mining via CuckaToo31.

[darkneorus]

hello, patrike

while waiting for an AM update with Zergpool added back, I've tried to add Zergpool to User Defined Online Services using "Import via API" button, now I can see all the algos and their profits in the Online Services tab, and AM uses them when profit switching. the problem is that AM always shows 0.00 profit/revenue for any miner that switches to any of the Zergpool stratums.

also I can't use Zergpool when doing a benchmark - Zergpool-unique algos are missing from the list with with "no pool available for benchmark" message.

am I doing something wrong?

thank you

[Allo-4ka]

If you are mining Grin, supported only in the very latest Bminer release, it uses some variation of Cuckoo Cycle that will require "cuckaroo29" as you point out.
I suppose this will be yet another algorithm to add. To make it even more complex it looks like Grin supports GPU mining via CuckaRoo29, but also ASIC mining via CuckaToo31.

Green will not support asik, and a fork is scheduled for a turn every 6 months.
C29 ~ 5.5-6 gb Ram GPU
C31 ~ 10.5-11 gb ram GPU
C32, C33 and so on
https://www.grin-forum.org/t/what-to-mine-choosing-between-cuckatoo31-and-cuckaroo29/1732

[baf28]

pls fix algo Cuckoo Cycle bminer, aeternity not correct.
Correct: cuckaroo29

Initialize diagnostics (2)
Starting Diagnostics. Awesome Miner version: 6.1.1
OS: Microsoft Windows 10 Pro 64-bit
nVidia driver version: 416.34
Microsoft VC++ 2013 runtime installed: Yes
Microsoft VC++ 2015 runtime installed: Yes
Starting Mining Software
Setting up Miner Engine. Instance: 1
Engine Type: 16, Auto Download: False, EnginePath: D:\Shara\Maйнинг\Miner Soft\bminer-v12.1.0-5083c32-CUDA-9.2\bminer.exe, Subtype: Disabled, CustomExecutable:
Properties: (WindowMode: ConsoleFormat, EngineType: 16, IsProfitMiner: False)
====================================================================================================
D:\Shara\Maйнинг\Miner Soft\bminer-v12.1.0-5083c32-CUDA-9.2\bminer.exe  -devices 0 -uri aeternity://baf.AsusPC50:x@eu-ru01.miningrigrentals.com:3322 -watchdog=false -api=0.0.0.0:4028
====================================================================================================
Mining Engine Process started, PID: 12120
> [INFO] [2019-01-17T11:45:20+06:00] Bminer: When Crypto-mining Made Fast (v12.1.0-5083c32)
> [INFO] [2019-01-17T11:45:20+06:00] Turning on experimental support for Aeternity mining
> [INFO] [2019-01-17T11:45:21+06:00] Watchdog has started.                        
> [INFO] [2019-01-17T11:45:21+06:00] Starting miner on 1 devices                  
> [INFO] [2019-01-17T11:45:21+06:00] Starting the management API at 0.0.0.0:4028  
> [FATA] [2019-01-17T11:45:21+06:00] Insufficient memory on device (0) to run the solver

====================================================================================================
Unexpected exit of mining software. Possible cause: Incorrect configuration or crashing software
Diagnostics completed

For Aeternity (Cuckoo Cycle), this should be correct.

If you are mining Grin, supported only in the very latest Bminer release, it uses some variation of Cuckoo Cycle that will require "cuckaroo29" as you point out.

I suppose this will be yet another algorithm to add. To make it even more complex it looks like Grin supports GPU mining via CuckaRoo29, but also ASIC mining via CuckaToo31.

I set it up and it works: bminer.exe -uri cuckaroo29://user:x@pool: 3322
bminer ver 12.1.0 cur

[Globalboosty]

the problem is that AM always shows 0.00 profit/revenue for any miner that switches to any of the Zergpool stratums

I have the same problem on my side