[WTB] GAW (Not Zen) HOSTED Scrypt Miners

[philipma1957]

I am running 11 gridseed blades in house.

I have been around a while.  

I would be willing to run 2 at your pool  with your worker settings.


Make an offer.

Thanks for the offer philipma1957.

How would that work?

Would you be selling me the 2 Blades and hosting them for me?
If so what kind of price are you looking for?

or

Are you offering me a Cloud Hosting type service on 2 of your Blades without me owning the hardware?
I wouldn't be so interested in this but may change my mind if the price is right

What I am really looking for is Hosted Hardware that I can have shipped to me when the time is right, I hope that makes sense

All the best
Deja

I could do Hosted Hardware that I sold to you. Or cloud. 

 If you are in the 50 states  shipping in the future while hosting in the short run is easy.

If you are out of the USA  cloud  only is easier.  Due to high overseas shipping.

Let me know where you would want them shipped.

 I can try to figure a cloud only price and I can try to figure  a host then ship later deal.

Best regards Phil

[1713584579]

1713584579

[1713584579]

1713584579

[1713584579]

1713584579

[1713584579]

1713584579

[Deja]

I am running 11 gridseed blades in house.

I have been around a while.  

I would be willing to run 2 at your pool  with your worker settings.


Make an offer.

Thanks for the offer philipma1957.

How would that work?

Would you be selling me the 2 Blades and hosting them for me?
If so what kind of price are you looking for?

or

Are you offering me a Cloud Hosting type service on 2 of your Blades without me owning the hardware?
I wouldn't be so interested in this but may change my mind if the price is right

What I am really looking for is Hosted Hardware that I can have shipped to me when the time is right, I hope that makes sense

All the best
Deja

I could do Hosted Hardware that I sold to you. Or cloud.  

 If you are in the 50 states  shipping in the future while hosting in the short run is easy.

If you are out of the USA  cloud  only is easier.  Due to high overseas shipping.

Let me know where you would want them shipped.

 I can try to figure a cloud only price and I can try to figure  a host then ship later deal.

Best regards Phil

Cheers Phil,

I am UK and SE Asia based so I guess the shipping would cost quite a bit.

Although that being said, I wouldn't mind paying the extra for shipping at the time if it's not too expensive and the price of the hardware is reasonable, I hope this makes sense  

Let me know your best price for both and we can go from there

All the best

[philipma1957]

I am running 11 gridseed blades in house.

I have been around a while.  

I would be willing to run 2 at your pool  with your worker settings.


Make an offer.

Thanks for the offer philipma1957.

How would that work?

Would you be selling me the 2 Blades and hosting them for me?
If so what kind of price are you looking for?

or

Are you offering me a Cloud Hosting type service on 2 of your Blades without me owning the hardware?
I wouldn't be so interested in this but may change my mind if the price is right

What I am really looking for is Hosted Hardware that I can have shipped to me when the time is right, I hope that makes sense

All the best
Deja

I could do Hosted Hardware that I sold to you. Or cloud.  

 If you are in the 50 states  shipping in the future while hosting in the short run is easy.

If you are out of the USA  cloud  only is easier.  Due to high overseas shipping.

Let me know where you would want them shipped.

 I can try to figure a cloud only price and I can try to figure  a host then ship later deal.

Best regards Phil

Cheers Phil,

I am UK and SE Asia based so I guess the shipping would cost quite a bit.

Although that being said, I wouldn't mind paying the extra for shipping at the time if it's not too expensive and the price of the hardware is reasonable, I hope this makes sense  

Let me know your best price for both and we can go from there

All the best

 give me  a few hours to mull over a price.

[Deja]

I am running 11 gridseed blades in house.

I have been around a while.  

I would be willing to run 2 at your pool  with your worker settings.


Make an offer.

Thanks for the offer philipma1957.

How would that work?

Would you be selling me the 2 Blades and hosting them for me?
If so what kind of price are you looking for?

or

Are you offering me a Cloud Hosting type service on 2 of your Blades without me owning the hardware?
I wouldn't be so interested in this but may change my mind if the price is right

What I am really looking for is Hosted Hardware that I can have shipped to me when the time is right, I hope that makes sense

All the best
Deja

I could do Hosted Hardware that I sold to you. Or cloud.  

 If you are in the 50 states  shipping in the future while hosting in the short run is easy.

If you are out of the USA  cloud  only is easier.  Due to high overseas shipping.

Let me know where you would want them shipped.

 I can try to figure a cloud only price and I can try to figure  a host then ship later deal.

Best regards Phil

Cheers Phil,

I am UK and SE Asia based so I guess the shipping would cost quite a bit.

Although that being said, I wouldn't mind paying the extra for shipping at the time if it's not too expensive and the price of the hardware is reasonable, I hope this makes sense  

Let me know your best price for both and we can go from there

All the best

 give me  a few hours to mull over a price.

No problem.

I'll check back in the morning, it's getting late here now

All the best

[kebabman]

It's a week 2 hosted so in the free hosting bracket until 4/2015,  so as you can imagine it cost me  a pretty penny. Looking for 1BTC.

Cheers mate, I'd be willing to pay around 0.7BTC (ish)

Let me know if you're interested or give me a counter offer

Cheers
Deja

Just check the order it was actually a week one Black Widow ($2299 shouldn't have looked!) hosting is good until 26th May 2015. I can't really let it go for less than 0.9BTC. Are we anywhere in the ballpark?

[philipma1957]

I am running 11 gridseed blades in house.

I have been around a while.  

I would be willing to run 2 at your pool  with your worker settings.


Make an offer.

Thanks for the offer philipma1957.

How would that work?

Would you be selling me the 2 Blades and hosting them for me?
If so what kind of price are you looking for?

or

Are you offering me a Cloud Hosting type service on 2 of your Blades without me owning the hardware?
I wouldn't be so interested in this but may change my mind if the price is right

What I am really looking for is Hosted Hardware that I can have shipped to me when the time is right, I hope that makes sense

All the best
Deja

I could do Hosted Hardware that I sold to you. Or cloud.  

 If you are in the 50 states  shipping in the future while hosting in the short run is easy.

If you are out of the USA  cloud  only is easier.  Due to high overseas shipping.

Let me know where you would want them shipped.

 I can try to figure a cloud only price and I can try to figure  a host then ship later deal.

Best regards Phil

Cheers Phil,

I am UK and SE Asia based so I guess the shipping would cost quite a bit.

Although that being said, I wouldn't mind paying the extra for shipping at the time if it's not too expensive and the price of the hardware is reasonable, I hope this makes sense  

Let me know your best price for both and we can go from there

All the best

 give me  a few hours to mull over a price.

No problem.

I'll check back in the morning, it's getting late here now

All the best

well the other person is offering you a black widow at .9 btc

that is better then I can do. two gridseeds hosted for 90 days is about 70 usd in power at the 15 cents a k watt that i pay. not minding labor  the labor.  etc.  the best prices I have paid are 400 a unit x 2 = 800 plus the 70  so at 870 usd for 90 days.  my profit is zero.

  now I mined the two newest for about 11 days that would have been 12 ltc  or about 102 usd - 6 for power = so  96 profit


So if I ask for 870 for 90 days of hosting  and you own them.  I make 96 .once I ship the two they will be about 96 to ship

the other guy is giving you a better deal with the black widow.

[Nexillus]

First my apologies on the late response. Work has been terrible and with our storms, power was out for sometime.

How much were you willingly to offer on the hosted blade at gawminers?

Second, how would we transfer it? Would I just switch it over to your pool until they activate the ability to transfer miners to others accounts?

[Deja]

Hi Guys,

Sorry for the delay in getting back to you all. I had some family issues that needed to be dealt with

@ philipma1957: Thanks for taking the time to work it out for me, I'm going to give it a miss though, it's the international shipping charges I'm not keen on.

@ KebabMan: I have sent you a PM, hopefully we can work something out

@ Nexillus: Let me know how much you are after, transferring it over should be fairly straight forward, I have done it before but have messaged Gaw to make sure it's still ok to do.

Still on the lookout people

Let me know what you have to offer.

Again, I prefer GAW Hosted not ZEN.

Cheers

[EnJoyThis]

Hi Guys,

Sorry for the delay in getting back to you all. I had some family issues that needed to be dealt with

@ philipma1957: Thanks for taking the time to work it out for me, I'm going to give it a miss though, it's the international shipping charges I'm not keen on.

@ KebabMan: I have sent you a PM, hopefully we can work something out

@ Nexillus: Let me know how much you are after, transferring it over should be fairly straight forward, I have done it before but have messaged Gaw to make sure it's still ok to do.

Still on the lookout people

Let me know what you have to offer.

Again, I prefer GAW Hosted not ZEN.

Cheers

Deja,

I've sent you a pm with an offer. Please respond in order to proceed.

Cheers
EJT

[Deja]

Hi Guys,

Sorry for the delay in getting back to you all. I had some family issues that needed to be dealt with

@ philipma1957: Thanks for taking the time to work it out for me, I'm going to give it a miss though, it's the international shipping charges I'm not keen on.

@ KebabMan: I have sent you a PM, hopefully we can work something out

@ Nexillus: Let me know how much you are after, transferring it over should be fairly straight forward, I have done it before but have messaged Gaw to make sure it's still ok to do.

Still on the lookout people

Let me know what you have to offer.

Again, I prefer GAW Hosted not ZEN.

Cheers

Deja,

I've sent you a pm with an offer. Please respond in order to proceed.

Cheers
EJT

Cheers EJT, I have replied to your PM

[tigerfree]

i have 27 mh/s in zen how i can transfer it  and what are you offering of it ?

[Deja]

i have 27 mh/s in zen how i can transfer it  and what are you offering of it ?

Sorry mate, not interested in ZEN Hosted, I want to be able to pick my own pools.

Thanks for the offer though

[Deja]

Still looking for Gaw Hosted Miners, Black Widow is the minimum unless you want to offer me an ultra/mega cheap G-Blade

I am only looking for Gaw Hosted hardware, don't want or need anything that is Zen Hosted

Let me know what you have and as long as it is hosted by Gaw we may be able to come to a deal

[Deja]

Upsy Daisy

[obermensch]

I bought one of the first "the fury hosted" 1.3mhz.

the sweet thing about this, was that i bought is while they was supposed to deduct "3% of the hosting power to coffer fees" so you don't pay anything in monthly fees.

so it's in Principe 1.3mhz of free hosted scrypt power.

send PM if interested =)

bought for 150$ before the big pricedump :/