jdwlupine
Member
 Offline
Activity: 74
Merit: 10
|
 |
July 06, 2014, 11:07:12 PM |
|
Got the hyperstake wallet working,but how do i know if i'm on the hyperstake blockchain or truck blockchain ?
note: deleted peers.dat, put '-connect=192.241.233.70' in truckcoin.conf
if you are using that in .conf, just change it to addnode=192.241.233.70 and still are on the same chain for now Thanks, updated conf file. Just transferred 650 truckcoin to my truckcoin wallet and they have also appeared in the hype wallet, will this transaction be orphaned once the fork happens ?current block at writing 31687. |
|
|
|
|
|
|
|
|
|
|
|
|
|
The forum strives to allow free discussion of any ideas. All policies are built around this principle. This doesn't mean you can post garbage, though: posts should actually contain ideas, and these ideas should be argued reasonably.
|
|
|
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction.
|
|
|
|
|
|
|
|
raskul
|
|
July 06, 2014, 11:19:40 PM |
|
/usr/bin/ld: cannot find -lboost_system-mgw48-mt-s-1_55
/usr/bin/ld: cannot find -lboost_filesystem-mgw48-mt-s-1_55
/usr/bin/ld: cannot find -lboost_program_options-mgw48-mt-s-1_55
/usr/bin/ld: cannot find -lboost_thread-mgw48-mt-s-1_55
collect2: error: ld returned 1 exit status
make: *** [HyperStake-qt] Error 1
|
tips 1APp826DqjJBdsAeqpEstx6Q8hD4urac8a
|
|
|
|
David Latapie
|
|
July 06, 2014, 11:26:06 PM |
|
/usr/bin/ld: cannot find -lboost_system-mgw48-mt-s-1_55
/usr/bin/ld: cannot find -lboost_filesystem-mgw48-mt-s-1_55
/usr/bin/ld: cannot find -lboost_program_options-mgw48-mt-s-1_55
/usr/bin/ld: cannot find -lboost_thread-mgw48-mt-s-1_55
collect2: error: ld returned 1 exit status
make: *** [HyperStake-qt] Error 1
You forgot the "commented out" part  Presently, the code won't work in Linux. Replace the content of HyperStake-qt.pro with this code: http://pastebin.com/pjPNNQ8YThen save and compile again. |
|
|
|
presstab (OP)
Legendary
Offline
Activity: 1330
Merit: 1000
Blockchain Developer
|
|
July 06, 2014, 11:26:17 PM |
|
I'm a bit confused as to what I should do now. I have the new wallet running with -connect 192.241.233.70, I have a few HYP in my wallet, but I'm not sure how to set those coins to stake. Stake says 0.00. I see the OP says the min age is 8 days, does this mean I have to run my wallet open for 8 days and it will start staking automatically ? Or do I ahve to do something to move the balance to stake ?
Well you would need to wait 8 days at least anyways. Right now we are still working to get the fork to take. I would shut your client down and check back tomorrow. With PoS coins you only need to have the wallet open after the maturity period, not through the whole time. |
|
|
|
|
Bumberchute
|
|
July 06, 2014, 11:26:27 PM |
|
/usr/bin/ld: cannot find -lboost_system-mgw48-mt-s-1_55
/usr/bin/ld: cannot find -lboost_filesystem-mgw48-mt-s-1_55
/usr/bin/ld: cannot find -lboost_program_options-mgw48-mt-s-1_55
/usr/bin/ld: cannot find -lboost_thread-mgw48-mt-s-1_55
collect2: error: ld returned 1 exit status
make: *** [HyperStake-qt] Error 1
anyone using linux to compile make sure you comment out the windows build instructs on the .pro
|
|
|
|
|
|
raskul
|
|
July 06, 2014, 11:30:10 PM |
|
/usr/bin/ld: cannot find -lboost_system-mgw48-mt-s-1_55
/usr/bin/ld: cannot find -lboost_filesystem-mgw48-mt-s-1_55
/usr/bin/ld: cannot find -lboost_program_options-mgw48-mt-s-1_55
/usr/bin/ld: cannot find -lboost_thread-mgw48-mt-s-1_55
collect2: error: ld returned 1 exit status
make: *** [HyperStake-qt] Error 1
You forgot the "commented out" part Presently, the code won't work in Linux. Replace the content of HyperStake-qt.pro with this code: http://pastebin.com/pjPNNQ8YThen save and compile again. TEMPLATE = app
TARGET = HyperStake-qt
VERSION = 0.7.2
INCLUDEPATH += src src/json src/qt
DEFINES += QT_GUI BOOST_THREAD_USE_LIB BOOST_SPIRIT_THREADSAFE BOOST_THREAD_PROVIDES_GENERIC_SHARED_MUTEX_ON_WIN __NO_SYSTEM_INCLUDES
CONFIG += no_include_pwd
QT += core gui xml
greaterThan(QT_MAJOR_VERSION, 4): QT += widgets
#uncomment the following section to enable building on windows:
OBJECTS_DIR = build
MOC_DIR = build
UI_DIR = build
# use: qmake "RELEASE=1"
contains(RELEASE, 1) {
# Mac: compile for maximum compatibility (10.5, 32-bit)
macx:QMAKE_CXXFLAGS += -mmacosx-version-min=10.5 -arch i386 -isysroot /Developer/SDKs/MacOSX10.5.sdk
!windows:!macx {
# Linux: static link
LIBS += -Wl,-Bstatic
}
}
!win32 {
# for extra security against potential buffer overflows: enable GCCs Stack Smashing Protection
QMAKE_CXXFLAGS *= -fstack-protector-all --param ssp-buffer-size=1
QMAKE_LFLAGS *= -fstack-protector-all --param ssp-buffer-size=1
# We need to exclude this for Windows cross compile with MinGW 4.2.x, as it will result in a non-working executable!
# This can be enabled for Windows, when we switch to MinGW >= 4.4.x.
}
# for extra security on Windows: enable ASLR and DEP via GCC linker flags
win32:QMAKE_LFLAGS *= -Wl,--dynamicbase -Wl,--nxcompat
# use: qmake "USE_QRCODE=1"
# libqrencode (http://fukuchi.org/works/qrencode/index.en.html) must be installed for support
contains(USE_QRCODE, 1) {
message(Building with QRCode support)
DEFINES += USE_QRCODE
LIBS += -lqrencode
}
# use: qmake "USE_UPNP=1" ( enabled by default; default)
# or: qmake "USE_UPNP=0" (disabled by default)
# or: qmake "USE_UPNP=-" (not supported)
# miniupnpc (http://miniupnp.free.fr/files/) must be installed for support
contains(USE_UPNP, -) {
message(Building without UPNP support)
} else {
message(Building with UPNP support)
count(USE_UPNP, 0) {
USE_UPNP=1
}
DEFINES += USE_UPNP=$$USE_UPNP STATICLIB
INCLUDEPATH += $$MINIUPNPC_INCLUDE_PATH
LIBS += $$join(MINIUPNPC_LIB_PATH,,-L,) -lminiupnpc
win32:LIBS += -liphlpapi
}
# use: qmake "USE_DBUS=1"
contains(USE_DBUS, 1) {
message(Building with DBUS (Freedesktop notifications) support)
DEFINES += USE_DBUS
QT += dbus
}
# use: qmake "USE_IPV6=1" ( enabled by default; default)
# or: qmake "USE_IPV6=0" (disabled by default)
# or: qmake "USE_IPV6=-" (not supported)
contains(USE_IPV6, -) {
message(Building without IPv6 support)
} else {
message(Building with IPv6 support)
count(USE_IPV6, 0) {
USE_IPV6=1
}
DEFINES += USE_IPV6=$$USE_IPV6
}
contains(BITCOIN_NEED_QT_PLUGINS, 1) {
DEFINES += BITCOIN_NEED_QT_PLUGINS
QTPLUGIN += qcncodecs qjpcodecs qtwcodecs qkrcodecs qtaccessiblewidgets
}
# regenerate src/build.h
!windows|contains(USE_BUILD_INFO, 1) {
genbuild.depends = FORCE
genbuild.commands = cd $$PWD; /bin/sh share/genbuild.sh $$OUT_PWD/build/build.h
genbuild.target = $$OUT_PWD/build/build.h
PRE_TARGETDEPS += $$OUT_PWD/build/build.h
QMAKE_EXTRA_TARGETS += genbuild
DEFINES += HAVE_BUILD_INFO
}
QMAKE_CXXFLAGS += -msse2
QMAKE_CFLAGS += -msse2
QMAKE_CXXFLAGS_WARN_ON = -fdiagnostics-show-option -Wall -Wextra -Wformat -Wformat-security -Wno-unused-parameter -Wstack-protector
# Input
DEPENDPATH += src src/json src/qt
HEADERS += src/qt/bitcoingui.h \
src/qt/transactiontablemodel.h \
src/qt/addresstablemodel.h \
src/qt/optionsdialog.h \
src/qt/coincontroldialog.h \
src/qt/coincontroltreewidget.h \
src/qt/sendcoinsdialog.h \
src/qt/addressbookpage.h \
src/qt/signverifymessagedialog.h \
src/qt/aboutdialog.h \
src/qt/editaddressdialog.h \
src/qt/bitcoinaddressvalidator.h \
src/alert.h \
src/addrman.h \
src/base58.h \
src/bignum.h \
src/checkpoints.h \
src/compat.h \
src/coincontrol.h \
src/sync.h \
src/util.h \
src/uint256.h \
src/kernel.h \
src/scrypt_mine.h \
src/pbkdf2.h \
src/serialize.h \
src/strlcpy.h \
src/main.h \
src/net.h \
src/key.h \
src/db.h \
src/walletdb.h \
src/script.h \
src/init.h \
src/irc.h \
src/mruset.h \
src/json/json_spirit_writer_template.h \
src/json/json_spirit_writer.h \
src/json/json_spirit_value.h \
src/json/json_spirit_utils.h \
src/json/json_spirit_stream_reader.h \
src/json/json_spirit_reader_template.h \
src/json/json_spirit_reader.h \
src/json/json_spirit_error_position.h \
src/json/json_spirit.h \
src/qt/clientmodel.h \
src/qt/guiutil.h \
src/qt/transactionrecord.h \
src/qt/guiconstants.h \
src/qt/optionsmodel.h \
src/qt/monitoreddatamapper.h \
src/qt/transactiondesc.h \
src/qt/transactiondescdialog.h \
src/qt/bitcoinamountfield.h \
src/wallet.h \
src/keystore.h \
src/qt/transactionfilterproxy.h \
src/qt/transactionview.h \
src/qt/walletmodel.h \
src/bitcoinrpc.h \
src/qt/overviewpage.h \
src/qt/csvmodelwriter.h \
src/crypter.h \
src/qt/sendcoinsentry.h \
src/qt/qvalidatedlineedit.h \
src/qt/bitcoinunits.h \
src/qt/qvaluecombobox.h \
src/qt/askpassphrasedialog.h \
src/protocol.h \
src/qt/notificator.h \
src/qt/qtipcserver.h \
src/allocators.h \
src/ui_interface.h \
src/qt/rpcconsole.h \
src/version.h \
src/netbase.h \
src/clientversion.h \
src/hashblock.h \
src/sph_blake.h \
src/sph_skein.h \
src/sph_keccak.h \
src/sph_jh.h \
src/sph_groestl.h \
src/sph_bmw.h \
src/sph_types.h \
src/sph_luffa.h \
src/sph_cubehash.h \
src/sph_echo.h \
src/sph_shavite.h \
src/sph_simd.h \
src/sph_types.h
SOURCES += src/qt/bitcoin.cpp src/qt/bitcoingui.cpp \
src/qt/transactiontablemodel.cpp \
src/qt/addresstablemodel.cpp \
src/qt/optionsdialog.cpp \
src/qt/sendcoinsdialog.cpp \
src/qt/coincontroldialog.cpp \
src/qt/coincontroltreewidget.cpp \
src/qt/addressbookpage.cpp \
src/qt/signverifymessagedialog.cpp \
src/qt/aboutdialog.cpp \
src/qt/editaddressdialog.cpp \
src/qt/bitcoinaddressvalidator.cpp \
src/alert.cpp \
src/version.cpp \
src/sync.cpp \
src/util.cpp \
src/netbase.cpp \
src/key.cpp \
src/script.cpp \
src/main.cpp \
src/init.cpp \
src/net.cpp \
src/irc.cpp \
src/checkpoints.cpp \
src/addrman.cpp \
src/db.cpp \
src/walletdb.cpp \
src/qt/clientmodel.cpp \
src/qt/guiutil.cpp \
src/qt/transactionrecord.cpp \
src/qt/optionsmodel.cpp \
src/qt/monitoreddatamapper.cpp \
src/qt/transactiondesc.cpp \
src/qt/transactiondescdialog.cpp \
src/qt/bitcoinstrings.cpp \
src/qt/bitcoinamountfield.cpp \
src/wallet.cpp \
src/keystore.cpp \
src/qt/transactionfilterproxy.cpp \
src/qt/transactionview.cpp \
src/qt/walletmodel.cpp \
src/bitcoinrpc.cpp \
src/rpcdump.cpp \
src/rpcnet.cpp \
src/rpcmining.cpp \
src/rpcwallet.cpp \
src/rpcblockchain.cpp \
src/rpcrawtransaction.cpp \
src/qt/overviewpage.cpp \
src/qt/csvmodelwriter.cpp \
src/crypter.cpp \
src/qt/sendcoinsentry.cpp \
src/qt/qvalidatedlineedit.cpp \
src/qt/bitcoinunits.cpp \
src/qt/qvaluecombobox.cpp \
src/qt/askpassphrasedialog.cpp \
src/protocol.cpp \
src/qt/notificator.cpp \
src/qt/qtipcserver.cpp \
src/qt/rpcconsole.cpp \
src/noui.cpp \
src/kernel.cpp \
src/pbkdf2.cpp \
src/blake.c \
src/bmw.c \
src/groestl.c \
src/jh.c \
src/keccak.c \
src/skein.c \
src/luffa.c \
src/cubehash.c \
src/shavite.c \
src/echo.c \
src/simd.c
RESOURCES += \
src/qt/bitcoin.qrc
FORMS += \
src/qt/forms/coincontroldialog.ui \
src/qt/forms/sendcoinsdialog.ui \
src/qt/forms/addressbookpage.ui \
src/qt/forms/signverifymessagedialog.ui \
src/qt/forms/aboutdialog.ui \
src/qt/forms/editaddressdialog.ui \
src/qt/forms/transactiondescdialog.ui \
src/qt/forms/overviewpage.ui \
src/qt/forms/sendcoinsentry.ui \
src/qt/forms/askpassphrasedialog.ui \
src/qt/forms/rpcconsole.ui \
src/qt/forms/optionsdialog.ui
contains(USE_QRCODE, 1) {
HEADERS += src/qt/qrcodedialog.h
SOURCES += src/qt/qrcodedialog.cpp
FORMS += src/qt/forms/qrcodedialog.ui
}
contains(BITCOIN_QT_TEST, 1) {
SOURCES += src/qt/test/test_main.cpp \
src/qt/test/uritests.cpp
HEADERS += src/qt/test/uritests.h
DEPENDPATH += src/qt/test
QT += testlib
TARGET = hyperstake-qt_test
DEFINES += BITCOIN_QT_TEST
}
CODECFORTR = UTF-8
# for lrelease/lupdate
# also add new translations to src/qt/bitcoin.qrc under translations/
TRANSLATIONS = $$files(src/qt/locale/bitcoin_*.ts)
isEmpty(QMAKE_LRELEASE) {
win32:QMAKE_LRELEASE = $$[QT_INSTALL_BINS]\\lrelease.exe
else:QMAKE_LRELEASE = $$[QT_INSTALL_BINS]/lrelease
}
isEmpty(QM_DIR):QM_DIR = $$PWD/src/qt/locale
# automatically build translations, so they can be included in resource file
TSQM.name = lrelease ${QMAKE_FILE_IN}
TSQM.input = TRANSLATIONS
TSQM.output = $$QM_DIR/${QMAKE_FILE_BASE}.qm
TSQM.commands = $$QMAKE_LRELEASE ${QMAKE_FILE_IN} -qm ${QMAKE_FILE_OUT}
TSQM.CONFIG = no_link
QMAKE_EXTRA_COMPILERS += TSQM
# "Other files" to show in Qt Creator
OTHER_FILES += \
doc/*.rst doc/*.txt doc/README README.md res/bitcoin-qt.rc src/test/*.cpp src/test/*.h src/qt/test/*.cpp src/qt/test/*.h
# platform specific defaults, if not overridden on command line
isEmpty(BOOST_LIB_SUFFIX) {
macx:BOOST_LIB_SUFFIX = -mt
windows:BOOST_LIB_SUFFIX = -mgw48-mt-s-1_55
}
isEmpty(BOOST_THREAD_LIB_SUFFIX) {
BOOST_THREAD_LIB_SUFFIX = $$BOOST_LIB_SUFFIX
}
isEmpty(BDB_LIB_PATH) {
macx:BDB_LIB_PATH = /opt/local/lib/db48
}
isEmpty(BDB_LIB_SUFFIX) {
macx:BDB_LIB_SUFFIX = -4.8
}
isEmpty(BDB_INCLUDE_PATH) {
macx:BDB_INCLUDE_PATH = /opt/local/include/db48
}
isEmpty(BOOST_LIB_PATH) {
macx:BOOST_LIB_PATH = /opt/local/lib
}
isEmpty(BOOST_INCLUDE_PATH) {
macx:BOOST_INCLUDE_PATH = /opt/local/include
}
windows:DEFINES += WIN32
windows:RC_FILE = src/qt/res/bitcoin-qt.rc
windows:!contains(MINGW_THREAD_BUGFIX, 0) {
# At least qmake's win32-g++-cross profile is missing the -lmingwthrd
# thread-safety flag. GCC has -mthreads to enable this, but it doesn't
# work with static linking. -lmingwthrd must come BEFORE -lmingw, so
# it is prepended to QMAKE_LIBS_QT_ENTRY.
# It can be turned off with MINGW_THREAD_BUGFIX=0, just in case it causes
# any problems on some untested qmake profile now or in the future.
DEFINES += _MT
QMAKE_LIBS_QT_ENTRY = -lmingwthrd $$QMAKE_LIBS_QT_ENTRY
}
!windows:!macx {
DEFINES += LINUX
LIBS += -lrt
}
macx:HEADERS += src/qt/macdockiconhandler.h
macx:OBJECTIVE_SOURCES += src/qt/macdockiconhandler.mm
macx:LIBS += -framework Foundation -framework ApplicationServices -framework AppKit
macx:DEFINES += MAC_OSX MSG_NOSIGNAL=0
macx:ICON = src/qt/res/icons/bitcoin.icns
macx:TARGET = "hyperstake-qt"
macx:QMAKE_CFLAGS_THREAD += -pthread
macx:QMAKE_LFLAGS_THREAD += -pthread
macx:QMAKE_CXXFLAGS_THREAD += -pthread
# Set libraries and includes at end, to use platform-defined defaults if not overridden
INCLUDEPATH += $$BOOST_INCLUDE_PATH $$BDB_INCLUDE_PATH $$OPENSSL_INCLUDE_PATH $$QRENCODE_INCLUDE_PATH
LIBS += $$join(BOOST_LIB_PATH,,-L,) $$join(BDB_LIB_PATH,,-L,) $$join(OPENSSL_LIB_PATH,,-L,) $$join(QRENCODE_LIB_PATH,,-L,)
LIBS += -lssl -lcrypto -ldb_cxx$$BDB_LIB_SUFFIX
# -lgdi32 has to happen after -lcrypto (see #681)
windows:LIBS += -lws2_32 -lshlwapi -lmswsock -lole32 -loleaut32 -luuid -lgdi32
LIBS += -lboost_system$$BOOST_LIB_SUFFIX -lboost_filesystem$$BOOST_LIB_SUFFIX -lboost_program_options$$BOOST_LIB_SUFFIX -lboost_thread$$BOOST_THREAD_LIB_SUFFIX
windows:LIBS += -lboost_chrono$$BOOST_LIB_SUFFIX
contains(RELEASE, 1) {
!windows:!macx {
# Linux: turn dynamic linking back on for c/c++ runtime libraries
LIBS += -Wl,-Bdynamic
}
}
system($$QMAKE_LRELEASE -silent $$_PRO_FILE_) so just paste all that in? |
tips 1APp826DqjJBdsAeqpEstx6Q8hD4urac8a
|
|
|
presstab (OP)
Legendary
Offline
Activity: 1330
Merit: 1000
Blockchain Developer
|
|
July 06, 2014, 11:36:57 PM |
|
/usr/bin/ld: cannot find -lboost_system-mgw48-mt-s-1_55
/usr/bin/ld: cannot find -lboost_filesystem-mgw48-mt-s-1_55
/usr/bin/ld: cannot find -lboost_program_options-mgw48-mt-s-1_55
/usr/bin/ld: cannot find -lboost_thread-mgw48-mt-s-1_55
collect2: error: ld returned 1 exit status
make: *** [HyperStake-qt] Error 1
You forgot the "commented out" part Presently, the code won't work in Linux. Replace the content of HyperStake-qt.pro with this code: http://pastebin.com/pjPNNQ8YThen save and compile again. TEMPLATE = app
TARGET = HyperStake-qt
VERSION = 0.7.2
INCLUDEPATH += src src/json src/qt
DEFINES += QT_GUI BOOST_THREAD_USE_LIB BOOST_SPIRIT_THREADSAFE BOOST_THREAD_PROVIDES_GENERIC_SHARED_MUTEX_ON_WIN __NO_SYSTEM_INCLUDES
CONFIG += no_include_pwd
QT += core gui xml
greaterThan(QT_MAJOR_VERSION, 4): QT += widgets
#uncomment the following section to enable building on windows:
OBJECTS_DIR = build
MOC_DIR = build
UI_DIR = build
# use: qmake "RELEASE=1"
contains(RELEASE, 1) {
# Mac: compile for maximum compatibility (10.5, 32-bit)
macx:QMAKE_CXXFLAGS += -mmacosx-version-min=10.5 -arch i386 -isysroot /Developer/SDKs/MacOSX10.5.sdk
!windows:!macx {
# Linux: static link
LIBS += -Wl,-Bstatic
}
}
!win32 {
# for extra security against potential buffer overflows: enable GCCs Stack Smashing Protection
QMAKE_CXXFLAGS *= -fstack-protector-all --param ssp-buffer-size=1
QMAKE_LFLAGS *= -fstack-protector-all --param ssp-buffer-size=1
# We need to exclude this for Windows cross compile with MinGW 4.2.x, as it will result in a non-working executable!
# This can be enabled for Windows, when we switch to MinGW >= 4.4.x.
}
# for extra security on Windows: enable ASLR and DEP via GCC linker flags
win32:QMAKE_LFLAGS *= -Wl,--dynamicbase -Wl,--nxcompat
# use: qmake "USE_QRCODE=1"
# libqrencode (http://fukuchi.org/works/qrencode/index.en.html) must be installed for support
contains(USE_QRCODE, 1) {
message(Building with QRCode support)
DEFINES += USE_QRCODE
LIBS += -lqrencode
}
# use: qmake "USE_UPNP=1" ( enabled by default; default)
# or: qmake "USE_UPNP=0" (disabled by default)
# or: qmake "USE_UPNP=-" (not supported)
# miniupnpc (http://miniupnp.free.fr/files/) must be installed for support
contains(USE_UPNP, -) {
message(Building without UPNP support)
} else {
message(Building with UPNP support)
count(USE_UPNP, 0) {
USE_UPNP=1
}
DEFINES += USE_UPNP=$$USE_UPNP STATICLIB
INCLUDEPATH += $$MINIUPNPC_INCLUDE_PATH
LIBS += $$join(MINIUPNPC_LIB_PATH,,-L,) -lminiupnpc
win32:LIBS += -liphlpapi
}
# use: qmake "USE_DBUS=1"
contains(USE_DBUS, 1) {
message(Building with DBUS (Freedesktop notifications) support)
DEFINES += USE_DBUS
QT += dbus
}
# use: qmake "USE_IPV6=1" ( enabled by default; default)
# or: qmake "USE_IPV6=0" (disabled by default)
# or: qmake "USE_IPV6=-" (not supported)
contains(USE_IPV6, -) {
message(Building without IPv6 support)
} else {
message(Building with IPv6 support)
count(USE_IPV6, 0) {
USE_IPV6=1
}
DEFINES += USE_IPV6=$$USE_IPV6
}
contains(BITCOIN_NEED_QT_PLUGINS, 1) {
DEFINES += BITCOIN_NEED_QT_PLUGINS
QTPLUGIN += qcncodecs qjpcodecs qtwcodecs qkrcodecs qtaccessiblewidgets
}
# regenerate src/build.h
!windows|contains(USE_BUILD_INFO, 1) {
genbuild.depends = FORCE
genbuild.commands = cd $$PWD; /bin/sh share/genbuild.sh $$OUT_PWD/build/build.h
genbuild.target = $$OUT_PWD/build/build.h
PRE_TARGETDEPS += $$OUT_PWD/build/build.h
QMAKE_EXTRA_TARGETS += genbuild
DEFINES += HAVE_BUILD_INFO
}
QMAKE_CXXFLAGS += -msse2
QMAKE_CFLAGS += -msse2
QMAKE_CXXFLAGS_WARN_ON = -fdiagnostics-show-option -Wall -Wextra -Wformat -Wformat-security -Wno-unused-parameter -Wstack-protector
# Input
DEPENDPATH += src src/json src/qt
HEADERS += src/qt/bitcoingui.h \
src/qt/transactiontablemodel.h \
src/qt/addresstablemodel.h \
src/qt/optionsdialog.h \
src/qt/coincontroldialog.h \
src/qt/coincontroltreewidget.h \
src/qt/sendcoinsdialog.h \
src/qt/addressbookpage.h \
src/qt/signverifymessagedialog.h \
src/qt/aboutdialog.h \
src/qt/editaddressdialog.h \
src/qt/bitcoinaddressvalidator.h \
src/alert.h \
src/addrman.h \
src/base58.h \
src/bignum.h \
src/checkpoints.h \
src/compat.h \
src/coincontrol.h \
src/sync.h \
src/util.h \
src/uint256.h \
src/kernel.h \
src/scrypt_mine.h \
src/pbkdf2.h \
src/serialize.h \
src/strlcpy.h \
src/main.h \
src/net.h \
src/key.h \
src/db.h \
src/walletdb.h \
src/script.h \
src/init.h \
src/irc.h \
src/mruset.h \
src/json/json_spirit_writer_template.h \
src/json/json_spirit_writer.h \
src/json/json_spirit_value.h \
src/json/json_spirit_utils.h \
src/json/json_spirit_stream_reader.h \
src/json/json_spirit_reader_template.h \
src/json/json_spirit_reader.h \
src/json/json_spirit_error_position.h \
src/json/json_spirit.h \
src/qt/clientmodel.h \
src/qt/guiutil.h \
src/qt/transactionrecord.h \
src/qt/guiconstants.h \
src/qt/optionsmodel.h \
src/qt/monitoreddatamapper.h \
src/qt/transactiondesc.h \
src/qt/transactiondescdialog.h \
src/qt/bitcoinamountfield.h \
src/wallet.h \
src/keystore.h \
src/qt/transactionfilterproxy.h \
src/qt/transactionview.h \
src/qt/walletmodel.h \
src/bitcoinrpc.h \
src/qt/overviewpage.h \
src/qt/csvmodelwriter.h \
src/crypter.h \
src/qt/sendcoinsentry.h \
src/qt/qvalidatedlineedit.h \
src/qt/bitcoinunits.h \
src/qt/qvaluecombobox.h \
src/qt/askpassphrasedialog.h \
src/protocol.h \
src/qt/notificator.h \
src/qt/qtipcserver.h \
src/allocators.h \
src/ui_interface.h \
src/qt/rpcconsole.h \
src/version.h \
src/netbase.h \
src/clientversion.h \
src/hashblock.h \
src/sph_blake.h \
src/sph_skein.h \
src/sph_keccak.h \
src/sph_jh.h \
src/sph_groestl.h \
src/sph_bmw.h \
src/sph_types.h \
src/sph_luffa.h \
src/sph_cubehash.h \
src/sph_echo.h \
src/sph_shavite.h \
src/sph_simd.h \
src/sph_types.h
SOURCES += src/qt/bitcoin.cpp src/qt/bitcoingui.cpp \
src/qt/transactiontablemodel.cpp \
src/qt/addresstablemodel.cpp \
src/qt/optionsdialog.cpp \
src/qt/sendcoinsdialog.cpp \
src/qt/coincontroldialog.cpp \
src/qt/coincontroltreewidget.cpp \
src/qt/addressbookpage.cpp \
src/qt/signverifymessagedialog.cpp \
src/qt/aboutdialog.cpp \
src/qt/editaddressdialog.cpp \
src/qt/bitcoinaddressvalidator.cpp \
src/alert.cpp \
src/version.cpp \
src/sync.cpp \
src/util.cpp \
src/netbase.cpp \
src/key.cpp \
src/script.cpp \
src/main.cpp \
src/init.cpp \
src/net.cpp \
src/irc.cpp \
src/checkpoints.cpp \
src/addrman.cpp \
src/db.cpp \
src/walletdb.cpp \
src/qt/clientmodel.cpp \
src/qt/guiutil.cpp \
src/qt/transactionrecord.cpp \
src/qt/optionsmodel.cpp \
src/qt/monitoreddatamapper.cpp \
src/qt/transactiondesc.cpp \
src/qt/transactiondescdialog.cpp \
src/qt/bitcoinstrings.cpp \
src/qt/bitcoinamountfield.cpp \
src/wallet.cpp \
src/keystore.cpp \
src/qt/transactionfilterproxy.cpp \
src/qt/transactionview.cpp \
src/qt/walletmodel.cpp \
src/bitcoinrpc.cpp \
src/rpcdump.cpp \
src/rpcnet.cpp \
src/rpcmining.cpp \
src/rpcwallet.cpp \
src/rpcblockchain.cpp \
src/rpcrawtransaction.cpp \
src/qt/overviewpage.cpp \
src/qt/csvmodelwriter.cpp \
src/crypter.cpp \
src/qt/sendcoinsentry.cpp \
src/qt/qvalidatedlineedit.cpp \
src/qt/bitcoinunits.cpp \
src/qt/qvaluecombobox.cpp \
src/qt/askpassphrasedialog.cpp \
src/protocol.cpp \
src/qt/notificator.cpp \
src/qt/qtipcserver.cpp \
src/qt/rpcconsole.cpp \
src/noui.cpp \
src/kernel.cpp \
src/pbkdf2.cpp \
src/blake.c \
src/bmw.c \
src/groestl.c \
src/jh.c \
src/keccak.c \
src/skein.c \
src/luffa.c \
src/cubehash.c \
src/shavite.c \
src/echo.c \
src/simd.c
RESOURCES += \
src/qt/bitcoin.qrc
FORMS += \
src/qt/forms/coincontroldialog.ui \
src/qt/forms/sendcoinsdialog.ui \
src/qt/forms/addressbookpage.ui \
src/qt/forms/signverifymessagedialog.ui \
src/qt/forms/aboutdialog.ui \
src/qt/forms/editaddressdialog.ui \
src/qt/forms/transactiondescdialog.ui \
src/qt/forms/overviewpage.ui \
src/qt/forms/sendcoinsentry.ui \
src/qt/forms/askpassphrasedialog.ui \
src/qt/forms/rpcconsole.ui \
src/qt/forms/optionsdialog.ui
contains(USE_QRCODE, 1) {
HEADERS += src/qt/qrcodedialog.h
SOURCES += src/qt/qrcodedialog.cpp
FORMS += src/qt/forms/qrcodedialog.ui
}
contains(BITCOIN_QT_TEST, 1) {
SOURCES += src/qt/test/test_main.cpp \
src/qt/test/uritests.cpp
HEADERS += src/qt/test/uritests.h
DEPENDPATH += src/qt/test
QT += testlib
TARGET = hyperstake-qt_test
DEFINES += BITCOIN_QT_TEST
}
CODECFORTR = UTF-8
# for lrelease/lupdate
# also add new translations to src/qt/bitcoin.qrc under translations/
TRANSLATIONS = $$files(src/qt/locale/bitcoin_*.ts)
isEmpty(QMAKE_LRELEASE) {
win32:QMAKE_LRELEASE = $$[QT_INSTALL_BINS]\\lrelease.exe
else:QMAKE_LRELEASE = $$[QT_INSTALL_BINS]/lrelease
}
isEmpty(QM_DIR):QM_DIR = $$PWD/src/qt/locale
# automatically build translations, so they can be included in resource file
TSQM.name = lrelease ${QMAKE_FILE_IN}
TSQM.input = TRANSLATIONS
TSQM.output = $$QM_DIR/${QMAKE_FILE_BASE}.qm
TSQM.commands = $$QMAKE_LRELEASE ${QMAKE_FILE_IN} -qm ${QMAKE_FILE_OUT}
TSQM.CONFIG = no_link
QMAKE_EXTRA_COMPILERS += TSQM
# "Other files" to show in Qt Creator
OTHER_FILES += \
doc/*.rst doc/*.txt doc/README README.md res/bitcoin-qt.rc src/test/*.cpp src/test/*.h src/qt/test/*.cpp src/qt/test/*.h
# platform specific defaults, if not overridden on command line
isEmpty(BOOST_LIB_SUFFIX) {
macx:BOOST_LIB_SUFFIX = -mt
windows:BOOST_LIB_SUFFIX = -mgw48-mt-s-1_55
}
isEmpty(BOOST_THREAD_LIB_SUFFIX) {
BOOST_THREAD_LIB_SUFFIX = $$BOOST_LIB_SUFFIX
}
isEmpty(BDB_LIB_PATH) {
macx:BDB_LIB_PATH = /opt/local/lib/db48
}
isEmpty(BDB_LIB_SUFFIX) {
macx:BDB_LIB_SUFFIX = -4.8
}
isEmpty(BDB_INCLUDE_PATH) {
macx:BDB_INCLUDE_PATH = /opt/local/include/db48
}
isEmpty(BOOST_LIB_PATH) {
macx:BOOST_LIB_PATH = /opt/local/lib
}
isEmpty(BOOST_INCLUDE_PATH) {
macx:BOOST_INCLUDE_PATH = /opt/local/include
}
windows:DEFINES += WIN32
windows:RC_FILE = src/qt/res/bitcoin-qt.rc
windows:!contains(MINGW_THREAD_BUGFIX, 0) {
# At least qmake's win32-g++-cross profile is missing the -lmingwthrd
# thread-safety flag. GCC has -mthreads to enable this, but it doesn't
# work with static linking. -lmingwthrd must come BEFORE -lmingw, so
# it is prepended to QMAKE_LIBS_QT_ENTRY.
# It can be turned off with MINGW_THREAD_BUGFIX=0, just in case it causes
# any problems on some untested qmake profile now or in the future.
DEFINES += _MT
QMAKE_LIBS_QT_ENTRY = -lmingwthrd $$QMAKE_LIBS_QT_ENTRY
}
!windows:!macx {
DEFINES += LINUX
LIBS += -lrt
}
macx:HEADERS += src/qt/macdockiconhandler.h
macx:OBJECTIVE_SOURCES += src/qt/macdockiconhandler.mm
macx:LIBS += -framework Foundation -framework ApplicationServices -framework AppKit
macx:DEFINES += MAC_OSX MSG_NOSIGNAL=0
macx:ICON = src/qt/res/icons/bitcoin.icns
macx:TARGET = "hyperstake-qt"
macx:QMAKE_CFLAGS_THREAD += -pthread
macx:QMAKE_LFLAGS_THREAD += -pthread
macx:QMAKE_CXXFLAGS_THREAD += -pthread
# Set libraries and includes at end, to use platform-defined defaults if not overridden
INCLUDEPATH += $$BOOST_INCLUDE_PATH $$BDB_INCLUDE_PATH $$OPENSSL_INCLUDE_PATH $$QRENCODE_INCLUDE_PATH
LIBS += $$join(BOOST_LIB_PATH,,-L,) $$join(BDB_LIB_PATH,,-L,) $$join(OPENSSL_LIB_PATH,,-L,) $$join(QRENCODE_LIB_PATH,,-L,)
LIBS += -lssl -lcrypto -ldb_cxx$$BDB_LIB_SUFFIX
# -lgdi32 has to happen after -lcrypto (see #681)
windows:LIBS += -lws2_32 -lshlwapi -lmswsock -lole32 -loleaut32 -luuid -lgdi32
LIBS += -lboost_system$$BOOST_LIB_SUFFIX -lboost_filesystem$$BOOST_LIB_SUFFIX -lboost_program_options$$BOOST_LIB_SUFFIX -lboost_thread$$BOOST_THREAD_LIB_SUFFIX
windows:LIBS += -lboost_chrono$$BOOST_LIB_SUFFIX
contains(RELEASE, 1) {
!windows:!macx {
# Linux: turn dynamic linking back on for c/c++ runtime libraries
LIBS += -Wl,-Bdynamic
}
}
system($$QMAKE_LRELEASE -silent $$_PRO_FILE_) so just paste all that in? I just uploaded a new file HyperStake-qt-linux.pro - use that |
|
|
|
|
raskul
|
|
July 07, 2014, 12:03:40 AM |
|
loaded up. so all you've done is changed the name of a coin? really? groundbreaking .  |
tips 1APp826DqjJBdsAeqpEstx6Q8hD4urac8a
|
|
|
see360
Member
Offline
Activity: 91
Merit: 10
|
|
July 07, 2014, 12:08:29 AM
Last edit: July 07, 2014, 12:36:17 AM by see360 |
|
Here's a logo proposal. Similar to an H for HyperStake coin with arrows and clock face ticks to indicate fast transactions.  and it is easily recognizable at 32x32  |
|
|
|
|
|
raskul
|
|
July 07, 2014, 12:10:12 AM |
|
|
tips 1APp826DqjJBdsAeqpEstx6Q8hD4urac8a
|
|
|
presstab (OP)
Legendary
Offline
Activity: 1330
Merit: 1000
Blockchain Developer
|
|
July 07, 2014, 12:14:09 AM |
|
With the most recent commit you will need to connect to the node I listed above in order to get any connections. We are waiting at block 31716 until we generate our own HYP block 31717. We have mature blocks be hashed, not sure how long it will take. We might even have to do some updates to the code to get it to take the updates easier.
The TRK is still moving so if you are passed block 31716 you are on TRK.
All other builds are now somewhat obsolete as they aren't able to connect to the update client unless rebuilt. So just sit back and relax and check back in a day. You aren't missing out on any action trust me.
|
|
|
|
|
armin22
|
|
July 07, 2014, 12:34:21 AM |
|
Here's a logo proposal. Similar to an H for Hypercoin, with arrows and clock face ticks to indicate fast transactions. and it is easily recognizable at 32x32 This coins isnt supposed to have anything in common with hypercoin.. |
|
|
|
see360
Member
Offline
Activity: 91
Merit: 10
|
|
July 07, 2014, 12:39:19 AM |
|
Here's a logo proposal. Similar to an H for...
This coins isnt supposed to have anything in common with hypercoin.. Thank you for catching my typo, I corrected it. And just to highlight the point, this logo proposal is unique to the best of my knowledge and nothing like that other coin. |
|
|
|
|
|
mafort1469
|
|
July 07, 2014, 12:52:05 AM |
|
So should we hold off selling our TRK coins for now or can we sell them if we want (have wallet.dat file saved)?
|
|
|
|
|
presstab (OP)
Legendary
Offline
Activity: 1330
Merit: 1000
Blockchain Developer
|
|
July 07, 2014, 01:22:26 AM |
|
So should we hold off selling our TRK coins for now or can we sell them if we want (have wallet.dat file saved)?
Hold you TRK until we have the first block. |
|
|
|
|
tom14cat14
|
|
July 07, 2014, 01:24:49 AM |
|
So should we hold off selling our TRK coins for now or can we sell them if we want (have wallet.dat file saved)?
Hold you TRK until we have the first block. Does this mean people could still buy TRK and get HYP? |
|
|
|
|
presstab (OP)
Legendary
Offline
Activity: 1330
Merit: 1000
Blockchain Developer
|
|
July 07, 2014, 01:30:09 AM |
|
So should we hold off selling our TRK coins for now or can we sell them if we want (have wallet.dat file saved)?
Hold you TRK until we have the first block. Does this mean people could still buy TRK and get HYP? Well right now we are on block 31716 for HYP and TRK is passed that. So right now anything on the TRK chain is already passed that block and won't carry over. We are trying to fork from this block, but I am not going to promise anything. |
|
|
|
|
raskul
|
|
July 07, 2014, 02:09:02 AM
Last edit: July 07, 2014, 02:41:01 AM by raskul |
|
a reminder you should always hold off unlocking your wallet until the blockchain has completely synced on pos coins. big well done guys it seems to have worked |
tips 1APp826DqjJBdsAeqpEstx6Q8hD4urac8a
|
|
|
|
mafort1469
|
|
July 07, 2014, 02:50:55 AM |
|
Hi, I am trying to get the wallet to work on Ubuntu 14.04 and have tried the above methods to no avail. Will the above threads referring to compiling on Linux work on Ubuntu 14.04 or am I just overlooking something? It does this and no desktop shortcut.....
hort@HORT:~$ mkdir -p ~/cryptos ; cd ~/cryptos && rm -rf HyperStake && git clone git://github.com/presstab/HyperStake && cd HyperStake && qmake-qt4 HyperStake-qt.pro && make && ln -s ~/cryptos/HyperStake/HyperStake-qt ~/Desktop/HYP
Cloning into 'HyperStake'...
remote: Counting objects: 456, done.
remote: Compressing objects: 100% (396/396), done.
remote: Total 456 (delta 57), reused 449 (delta 50)
Receiving objects: 100% (456/456), 3.07 MiB | 628.00 KiB/s, done.
Resolving deltas: 100% (57/57), done.
Checking connectivity... done.
Project MESSAGE: Building with UPNP support
Project MESSAGE: Building with IPv6 support
sh: 1: /usr/lib/x86_64-linux-gnu/qt4/bin/lrelease: not found
cd /home/hort/cryptos/HyperStake; /bin/sh share/genbuild.sh /home/hort/cryptos/HyperStake/build/build.h
/usr/lib/x86_64-linux-gnu/qt4/bin/uic src/qt/forms/coincontroldialog.ui -o build/ui_coincontroldialog.h
make: /usr/lib/x86_64-linux-gnu/qt4/bin/uic: Command not found
make: *** [build/ui_coincontroldialog.h] Error 127
hort@HORT:~/cryptos/HyperStake$
Any help is greatly appreciated. Thank you.
|
|
|
|
|
|
CrazyLoaf
|
|
July 07, 2014, 02:57:52 AM |
|
Okay. Super confused, so I would appreciate some help. Download Truckcoin wallet, moved coins over to it and copied all my files over. Hopefully the fork hasn't already happened since, not going to lie, I'd be butthurt  Downloaded all of Raskul's stuff. I'm guessing this is a complied Windows wallet (no idea why it has ZIM and XXX in it). Made a backup of Truckcoin app data, cleared everything out but wallet.dat. Letting blockchain redownload. Is Hyper running off it's own app data directory yet, or is it still Truckcoin? Is there still time to buy more Truckcoin and move it to the wallets ahead of the fork? Such confusion  |
|
|
|
|
|
