|
splat44
|
 |
January 08, 2015, 04:15:08 PM |
|
R9 270x is exactly the one.
Therefore as I gather, having R7 and R9 installed then 4 cores CPU work, correct?
Yep. Perfect, below image is an sample of 12 hours mining:  I have few questions: Based on SHARES FOUND TYPE:1... where are being credit to "ch" area? I also found once there an entry on "10ch" then avg CPD is seen and not before correct? About avg CPD, is this what my system producing? About toggle "s", is there to start miner starting detailed stats just in miner restarting? Is there a way to input/append shares found and ect... to text file within miner setting This is certainly a best miner! About avg CPD, yes. About toggle "s", it not restart miner but just change the view. I hope to answer the other questions Claymore or something else. This is the result of work R9 270X? Yep! I think you're answered my question! Oh, yes, above result of work is on R7. What do think so far? if you see any needed improvements, I trust you can tell me! |
|
|
|
|
|
|
|
"Governments are good at cutting off the heads of a centrally
controlled
networks like Napster, but pure P2P networks like Gnutella and Tor seem
to be holding their own." -- Satoshi
|
|
|
|
|
|
xandry
Staff
Legendary
 Offline
Activity: 3430
Merit: 3982
Crypto Swap Exchange
|
|
January 08, 2015, 08:34:22 PM
Last edit: January 08, 2015, 09:49:16 PM by xandry |
|
R9 270x is exactly the one.
Therefore as I gather, having R7 and R9 installed then 4 cores CPU work, correct?
Yep. Perfect, below image is an sample of 12 hours mining: I have few questions: Based on SHARES FOUND TYPE:1... where are being credit to "ch" area? I also found once there an entry on "10ch" then avg CPD is seen and not before correct? About avg CPD, is this what my system producing? About toggle "s", is there to start miner starting detailed stats just in miner restarting? Is there a way to input/append shares found and ect... to text file within miner setting This is certainly a best miner! About avg CPD, yes. About toggle "s", it not restart miner but just change the view. I hope to answer the other questions Claymore or something else. This is the result of work R9 270X? Yep! I think you're answered my question! Oh, yes, above result of work is on R7. What do think so far? if you see any needed improvements, I trust you can tell me! This explains the poor results. Even my old overclocked HD7850 gives to pool about 130 shares per hour. |
|
|
|
|
splat44
|
|
January 08, 2015, 08:57:52 PM
Last edit: January 08, 2015, 09:20:55 PM by splat44 |
|
R9 270x is exactly the one.
Therefore as I gather, having R7 and R9 installed then 4 cores CPU work, correct?
Yep. Perfect, below image is an sample of 12 hours mining: I have few questions: Based on SHARES FOUND TYPE:1... where are being credit to "ch" area? I also found once there an entry on "10ch" then avg CPD is seen and not before correct? About avg CPD, is this what my system producing? About toggle "s", is there to start miner starting detailed stats just in miner restarting? Is there a way to input/append shares found and ect... to text file within miner setting This is certainly a best miner! About avg CPD, yes. About toggle "s", it not restart miner but just change the view. I hope to answer the other questions Claymore or something else. This is the result of work R9 270X? Yep! I think you're answered my question! Oh, yes, above result of work is on R7. What do think so far? if you see any needed improvements, I trust you can tell me! This explains the poor results. Even my old overclocked HD8570 gives to pool about 130 shares per hour. I guess in getting R9 is best route. I also notice yesterday the avg CPD were over 6.00, does this mean anything? Using R7 and R9 270 using 4 core, what the amount shares can be produced so I know? |
|
|
|
|
xandry
Staff
Legendary
Offline
Activity: 3430
Merit: 3982
Crypto Swap Exchange
|
|
January 09, 2015, 08:14:09 AM |
|
R9 270x is exactly the one.
Therefore as I gather, having R7 and R9 installed then 4 cores CPU work, correct?
Yep. Perfect, below image is an sample of 12 hours mining: I have few questions: Based on SHARES FOUND TYPE:1... where are being credit to "ch" area? I also found once there an entry on "10ch" then avg CPD is seen and not before correct? About avg CPD, is this what my system producing? About toggle "s", is there to start miner starting detailed stats just in miner restarting? Is there a way to input/append shares found and ect... to text file within miner setting This is certainly a best miner! About avg CPD, yes. About toggle "s", it not restart miner but just change the view. I hope to answer the other questions Claymore or something else. This is the result of work R9 270X? Yep! I think you're answered my question! Oh, yes, above result of work is on R7. What do think so far? if you see any needed improvements, I trust you can tell me! This explains the poor results. Even my old overclocked HD8570 gives to pool about 130 shares per hour. I guess in getting R9 is best route. I also notice yesterday the avg CPD were over 6.00, does this mean anything? Using R7 and R9 270 using 4 core, what the amount shares can be produced so I know? 6 CPD is better of course. With 6 CPD you can get about 2,944 XPM per day. And with two your cards about 3,876 XPM. |
|
|
|
|
splat44
|
|
January 09, 2015, 04:32:41 PM |
|
R9 270x is exactly the one.
Therefore as I gather, having R7 and R9 installed then 4 cores CPU work, correct?
Yep. Perfect, below image is an sample of 12 hours mining: I have few questions: Based on SHARES FOUND TYPE:1... where are being credit to "ch" area? I also found once there an entry on "10ch" then avg CPD is seen and not before correct? About avg CPD, is this what my system producing? About toggle "s", is there to start miner starting detailed stats just in miner restarting? Is there a way to input/append shares found and ect... to text file within miner setting This is certainly a best miner! About avg CPD, yes. About toggle "s", it not restart miner but just change the view. I hope to answer the other questions Claymore or something else. This is the result of work R9 270X? Yep! I think you're answered my question! Oh, yes, above result of work is on R7. What do think so far? if you see any needed improvements, I trust you can tell me! This explains the poor results. Even my old overclocked HD8570 gives to pool about 130 shares per hour. I guess in getting R9 is best route. I also notice yesterday the avg CPD were over 6.00, does this mean anything? Using R7 and R9 270 using 4 core, what the amount shares can be produced so I know? 6 CPD is better of course. With 6 CPD you can get about 2,944 XPM per day. And with two your cards about 3,876 XPM. Exactly what I thought but as I wake up, I noted noted miner has restarted at some and seem taking place almost every day! Why is that? Are there ways to fix this? |
|
|
|
|
xandry
Staff
Legendary
Offline
Activity: 3430
Merit: 3982
Crypto Swap Exchange
|
|
January 09, 2015, 04:58:47 PM |
|
It is rather a problem of the ypool. Because I also notice periodically restart my miners and not only Primecoin. It's not much bothers me because miners almost immediately begin to work as before.
|
|
|
|
|
|
Claymore (OP)
Donator
Legendary
Offline
Activity: 1610
Merit: 1325
Miners developer
|
|
January 24, 2015, 07:26:23 AM |
|
I don't have this card here, but it must work. If miner cannot find this card it means that you need to install OpenCL. |
|
|
|
panda0229
Newbie
Offline
Activity: 16
Merit: 0
|
|
January 24, 2015, 12:47:56 PM |
|
Thanks for reply, I'll check AMD website to see if any driver/SDK support opencl enable on window7.
|
|
|
|
|
panda0229
Newbie
Offline
Activity: 16
Merit: 0
|
|
January 25, 2015, 01:25:02 AM
Last edit: January 25, 2015, 01:44:43 AM by panda0229 |
|
For notes, after install Monther board graphic driver, opencl function become to work.
|
|
|
|
|
aistto
Legendary
Offline
Activity: 1001
Merit: 1005
|
|
February 10, 2015, 07:19:02 AM |
|
At one point I see this  win 8.1 cat 13.12 GPU Miner v13.0 6*280x before it was ok, about 53 ch/d WHF? |
|
|
|
|
Claymore (OP)
Donator
Legendary
Offline
Activity: 1610
Merit: 1325
Miners developer
|
|
February 10, 2015, 10:55:16 AM |
|
At one point I see this
win 8.1
cat 13.12
GPU Miner v13.0
6*280x
before it was ok, about 53 ch/d
WHF?
It looks like time counter overflow, I can fix it easily, but to confirm it: How long does your system work without reboot? |
|
|
|
aistto
Legendary
Offline
Activity: 1001
Merit: 1005
|
|
February 10, 2015, 01:05:57 PM |
|
At one point I see this
...
It looks like time counter overflow, I can fix it easily, but to confirm it: How long does your system work without reboot? 53 days, I rebooted it. Now it is looks normally  |
|
|
|
|
Claymore (OP)
Donator
Legendary
Offline
Activity: 1610
Merit: 1325
Miners developer
|
|
February 10, 2015, 02:18:14 PM |
|
At one point I see this
...
It looks like time counter overflow, I can fix it easily, but to confirm it: How long does your system work without reboot? 53 days, I rebooted it. Now it is looks normally I use time counter that overflows after 49 days without reboot  |
|
|
|
|
z0rr0
|
|
February 26, 2015, 04:19:08 PM |
|
Hello everyone, is it still worth mining XPM in terms of electricity bills?
Thanks.
|
|
|
|
|
|
Neosaan
|
|
June 17, 2015, 06:33:12 PM |
|
I'm dig in the prime Ypool. 7 hours my rigs total power of 180 CPD received
BALANCE (XPM)
0.00001663
UNCONFIRMED (XPM)
12.58535590
Why so few? in another pool with another miner obtained 5 times more.
Ypool scammers?...
|
|
|
|
|
|
eXtremal
|
|
June 17, 2015, 08:36:19 PM |
|
Why so few? in another pool with another miner obtained 5 times more.
Ypool scammers?...
Ypool is ok, but I see there too little block rate and a lot of orphans. I think, problem in original primecoind code.. after some hours work pool node (with very high block rate ~120 blocks/hour) begin send new blocks with delay 1-2 minutes. I have configured pool xpmforall for restarting every 4 hours, it must help ypool work properly at current primecoin network speed and difficulty. |
|
|
|
CoffeeCat
Newbie
Offline
Activity: 39
Merit: 0
|
|
June 19, 2015, 11:51:13 PM |
|
Which version works with the 14.12 omega drivers? Thanks.
|
|
|
|
|
xandry
Staff
Legendary
Offline
Activity: 3430
Merit: 3982
Crypto Swap Exchange
|
|
June 20, 2015, 05:46:51 AM |
|
Which version works with the 14.12 omega drivers? Thanks.
It called "Claymore XPM GPU Miner v13.0 Beta - POOL - Catalyst 14.x" Also works fine with beta AMD drivers. |
|
|
|
CoffeeCat
Newbie
Offline
Activity: 39
Merit: 0
|
|
June 20, 2015, 01:05:22 PM |
|
Which version works with the 14.12 omega drivers? Thanks.
It called "Claymore XPM GPU Miner v13.0 Beta - POOL - Catalyst 14.x" Also works fine with beta AMD drivers. That's what I tried and it doesn't seem to be compatible. |
|
|
|
|
|
