[ANN] SpreadCoin | True Decentralization (No Pools) | Testing New Masternodes

[defunctec]

-- snip --

But for 2 BTC u can get 290x and compensate for lover hashrate and when the mining days of SPR is over u can use it for other coins

Think big, is meant for those GPU farms with tens or hundreds of GPUs.

I'm mining over two days 2 x r9 280 not single block.  I see now because farms using optimized miner getting all the blocks.  Not even chance to get few coins on pool.  Wasted time mining just burn electricity.  I give up and stop mining.  This is big farm coin only.

LOL - not true - I mine from my little home with (10) 750ti's and hit blocks every day - my block range is somewhere between 4-8 blocks per day.

That is most 50 coins each day.  Its wasting time with 10 750ti.  Is that with optimize miner?  Looks ocminer setting up pool for maybe everyone to use.  Will wait and maybe mine when pool is ready.  How long for pool ocminer?

Pool?

Public or private?

Public, just finishing up some tests. Wanna mine ? Which miner would you need ?

Trustless?

How does this work?

[1714022384]

1714022384

[1714022384]

1714022384

[1714022384]

1714022384

[1714022384]

1714022384

[ivcelmik]

Guys cheap spr at Bittrex!!!

[njs811]

Guys cheap spr at Bittrex!!!

Holy cow that price is awesome!

[wow!NotAgain]

Guys cheap spr at Bittrex!!!

When public pool up it will be better to mine so wait and mine instead of buy.  Everyone will have chance to mine not just big farm.

[zmija]

I was mining on both and since linux nvidia drivers a well behind windows i was getting only 1200 khs and on windows 1500 khs with gtx 860, but i wasn't trying to mine on linux with 280x. CPU mining is also better on windows for 40 khs and i have i7-4710HQ

40kh/s? You should be able to get better than that - even on a mobile CPU. My desktop CPU gets 300kh/s+ on SPR with the stock in-wallet miner.

Well Wolf0 i get 55-65 khs on linux and on windows 90-100 khs with 7 cores (not using 8 )
Do u use Xeon to get 300+?

No, it's my desktop - i7-5930K, overclocked.

Really, i see u know how to handle your hardware. I wonder if i could overclock mine since my mobile is using 2 fans one for cpu and one for gpu. (btw the mobile still has 7 months warranty left so....)

Most laptops have locked CPUs and no OC options in the BIOS - however, if you know the specific chip your motherboard uses, you can use a program like SetFSB to clock it a bit higher.

I'm running my i7-5930K at 4.65Ghz (IIRC), and DDR4-2666 OC'd to DDR4-3000.

It's Lenovo Y50-70 with Intel HM86 Motherboard Chipset

Let me check what my laptop gets - it has an i7-4700HQ.

Done: Stock gets ~200kh/s, modified ~300kh/s. I actually expected the gain to be bigger.

Screenshots (NSFW): https://ottrbutt.com/miner/spreadcoin-cpu-stock.png & https://ottrbutt.com/miner/spreadcoin-cpu-modified.png

Uoouu but that wasn't your i7-4700HQ mobile processor right?

Indeed it was - stock clocks.

But how can it be isn't i7-4710HQ even a bit faster then i7-4700HQ, but i can't pass 100 khs? How is that possible?

Are you using a 64-bit build of spreadcoin-qt?

64-bit of course

Well, I'm on Linux, and you're on Windows... only difference being, I'm on testnet, and you're on mainnet. That, and I built it myself, but I didn't change any flags...

Interesting bcs on linux i get around 65 khs with 64-bit official wallet

[georgem]

I just sold half my SPR because Mr. Spread hasn't logged in for awhile.  Has me nervous. 

Lol, well the community thanks you from the bottom of our hearts for spreading the spreadcoins around!

[zmija]

I just sold half my SPR because Mr. Spread hasn't logged in for awhile.  Has me nervous. 

Lol, well the community thanks you from the bottom of our hearts for spreading the spreadcoins around!

damn i don't have any BTC left

[georgem]

I don't mean to spook you guys, but he also moved the coins people donated to him and hasn't logged into spreadcointalk.org since the 14th...

Some people have 9 to 5 workdays. You can't expect Mr. Spread to be lurking in the forums 24/7.
Also, if you really want to know Mr. Spreads activity you should check github.

That's the only activity that matters.

[georgem]

I just sold half my SPR because Mr. Spread hasn't logged in for awhile.  Has me nervous. 

Lol, well the community thanks you from the bottom of our hearts for spreading the spreadcoins around!

damn i don't have any BTC left

Me too...

Anyway. Let's get ready and prepare for when the next guy gets cold feet. 
Good fortune favours the well prepared.

[njs811]

I just sold half my SPR because Mr. Spread hasn't logged in for awhile.  Has me nervous. 

Lol, well the community thanks you from the bottom of our hearts for spreading the spreadcoins around!

damn i don't have any BTC left

Me too...

Anyway. Let's get ready and prepare for when the next guy gets cold feet. 
Good fortune favours the well prepared.

That's true, we might see the price near 0.0001 once someone freaks out thinking they lost it all.

[njs811]

In all seriousness though we could be done within 24 hours with tMN if people stop mining it. I need about 10k tspr to finish the masternodes.

[zmija]

I was mining on both and since linux nvidia drivers a well behind windows i was getting only 1200 khs and on windows 1500 khs with gtx 860, but i wasn't trying to mine on linux with 280x. CPU mining is also better on windows for 40 khs and i have i7-4710HQ

40kh/s? You should be able to get better than that - even on a mobile CPU. My desktop CPU gets 300kh/s+ on SPR with the stock in-wallet miner.

Well Wolf0 i get 55-65 khs on linux and on windows 90-100 khs with 7 cores (not using 8 )
Do u use Xeon to get 300+?

No, it's my desktop - i7-5930K, overclocked.

Really, i see u know how to handle your hardware. I wonder if i could overclock mine since my mobile is using 2 fans one for cpu and one for gpu. (btw the mobile still has 7 months warranty left so....)

Most laptops have locked CPUs and no OC options in the BIOS - however, if you know the specific chip your motherboard uses, you can use a program like SetFSB to clock it a bit higher.

I'm running my i7-5930K at 4.65Ghz (IIRC), and DDR4-2666 OC'd to DDR4-3000.

It's Lenovo Y50-70 with Intel HM86 Motherboard Chipset

Let me check what my laptop gets - it has an i7-4700HQ.

Done: Stock gets ~200kh/s, modified ~300kh/s. I actually expected the gain to be bigger.

Screenshots (NSFW): https://ottrbutt.com/miner/spreadcoin-cpu-stock.png & https://ottrbutt.com/miner/spreadcoin-cpu-modified.png

Uoouu but that wasn't your i7-4700HQ mobile processor right?

Indeed it was - stock clocks.

But how can it be isn't i7-4710HQ even a bit faster then i7-4700HQ, but i can't pass 100 khs? How is that possible?

Are you using a 64-bit build of spreadcoin-qt?

64-bit of course

Well, I'm on Linux, and you're on Windows... only difference being, I'm on testnet, and you're on mainnet. That, and I built it myself, but I didn't change any flags...

Now that's interesting i only get 49 khs on 32-bit wallet, probably normal since it's 64-bit system

[njs811]

In all seriousness though we could be done within 24 hours with tMN if people stop mining it. I need about 10k tspr to finish the masternodes.

I can mine that for you in a lot less than 24h. Going at it.

Well that's not the issue. I'm getting around 200 Kh/s I just need the tspr to setup MNs

[njs811]

In all seriousness though we could be done within 24 hours with tMN if people stop mining it. I need about 10k tspr to finish the masternodes.

I can mine that for you in a lot less than 24h. Going at it.

Well that's not the issue. I'm getting around 200 Kh/s I just need the tspr to setup MNs

I'm mining with over 600kh/s with my CPU on the testnet - will be faster if I mine too and send you the tSPR.

Sounds good then. Message me when you are finished.

[zmija]

I was mining on both and since linux nvidia drivers a well behind windows i was getting only 1200 khs and on windows 1500 khs with gtx 860, but i wasn't trying to mine on linux with 280x. CPU mining is also better on windows for 40 khs and i have i7-4710HQ

40kh/s? You should be able to get better than that - even on a mobile CPU. My desktop CPU gets 300kh/s+ on SPR with the stock in-wallet miner.

Well Wolf0 i get 55-65 khs on linux and on windows 90-100 khs with 7 cores (not using 8 )
Do u use Xeon to get 300+?

No, it's my desktop - i7-5930K, overclocked.

Really, i see u know how to handle your hardware. I wonder if i could overclock mine since my mobile is using 2 fans one for cpu and one for gpu. (btw the mobile still has 7 months warranty left so....)

Most laptops have locked CPUs and no OC options in the BIOS - however, if you know the specific chip your motherboard uses, you can use a program like SetFSB to clock it a bit higher.

I'm running my i7-5930K at 4.65Ghz (IIRC), and DDR4-2666 OC'd to DDR4-3000.

It's Lenovo Y50-70 with Intel HM86 Motherboard Chipset

Let me check what my laptop gets - it has an i7-4700HQ.

Done: Stock gets ~200kh/s, modified ~300kh/s. I actually expected the gain to be bigger.

Screenshots (NSFW): https://ottrbutt.com/miner/spreadcoin-cpu-stock.png & https://ottrbutt.com/miner/spreadcoin-cpu-modified.png

Uoouu but that wasn't your i7-4700HQ mobile processor right?

Indeed it was - stock clocks.

But how can it be isn't i7-4710HQ even a bit faster then i7-4700HQ, but i can't pass 100 khs? How is that possible?

Are you using a 64-bit build of spreadcoin-qt?

64-bit of course

Well, I'm on Linux, and you're on Windows... only difference being, I'm on testnet, and you're on mainnet. That, and I built it myself, but I didn't change any flags...

Now that's interesting i only get 49 khs on 32-bit wallet, probably normal since it's 64-bit system

Of course, then - it's probably a generic build that doesn't take advantage of SSE2 - which all 64-bit CPUs have.

So in your opinion it would better to compile it on linux from source code then? Maybe i would get higher hash rate from CPU?

[ocminer]

Guys cheap spr at Bittrex!!!

When public pool up it will be better to mine so wait and mine instead of buy.  Everyone will have chance to mine not just big farm.

Its already public, just msg me which miners you need and i'll send them to you

[njs811]

Guys cheap spr at Bittrex!!!

When public pool up it will be better to mine so wait and mine instead of buy.  Everyone will have chance to mine not just big farm.

Its already public, just msg me which miners you need and i'll send them to you

What do you mean which miners? And I would be careful. Pools running SPR have the ability to steal your coins!

[zmija]

I was mining on both and since linux nvidia drivers a well behind windows i was getting only 1200 khs and on windows 1500 khs with gtx 860, but i wasn't trying to mine on linux with 280x. CPU mining is also better on windows for 40 khs and i have i7-4710HQ

40kh/s? You should be able to get better than that - even on a mobile CPU. My desktop CPU gets 300kh/s+ on SPR with the stock in-wallet miner.

Well Wolf0 i get 55-65 khs on linux and on windows 90-100 khs with 7 cores (not using 8 )
Do u use Xeon to get 300+?

No, it's my desktop - i7-5930K, overclocked.

Really, i see u know how to handle your hardware. I wonder if i could overclock mine since my mobile is using 2 fans one for cpu and one for gpu. (btw the mobile still has 7 months warranty left so....)

Most laptops have locked CPUs and no OC options in the BIOS - however, if you know the specific chip your motherboard uses, you can use a program like SetFSB to clock it a bit higher.

I'm running my i7-5930K at 4.65Ghz (IIRC), and DDR4-2666 OC'd to DDR4-3000.

It's Lenovo Y50-70 with Intel HM86 Motherboard Chipset

Let me check what my laptop gets - it has an i7-4700HQ.

Done: Stock gets ~200kh/s, modified ~300kh/s. I actually expected the gain to be bigger.

Screenshots (NSFW): https://ottrbutt.com/miner/spreadcoin-cpu-stock.png & https://ottrbutt.com/miner/spreadcoin-cpu-modified.png

Uoouu but that wasn't your i7-4700HQ mobile processor right?

Indeed it was - stock clocks.

But how can it be isn't i7-4710HQ even a bit faster then i7-4700HQ, but i can't pass 100 khs? How is that possible?

Are you using a 64-bit build of spreadcoin-qt?

64-bit of course

Well, I'm on Linux, and you're on Windows... only difference being, I'm on testnet, and you're on mainnet. That, and I built it myself, but I didn't change any flags...

Now that's interesting i only get 49 khs on 32-bit wallet, probably normal since it's 64-bit system

Of course, then - it's probably a generic build that doesn't take advantage of SSE2 - which all 64-bit CPUs have.

So in your opinion it would better to compile it on linux from source code then? Maybe i would get higher hash rate from CPU?

Almost certainly. Also, if you edit the Makefile to add a few optimization flags, it'll be even faster.

Well thx i'll give it a try. You wouldn't know which optimization flags to add or would you

[ocminer]

Guys cheap spr at Bittrex!!!

When public pool up it will be better to mine so wait and mine instead of buy.  Everyone will have chance to mine not just big farm.

Its already public, just msg me which miners you need and i'll send them to you

What do you mean which miners? And I would be careful. Pools running SPR have the ability to steal your coins!

huh ? How should I steal the coins ? And why ? The pool is free, the miners are "standard-miners" like ccminer/sgminer and you can always watch your stats in the miner and at the pool i.e. found blocks etc. so there is very low danger of "pools stealing coins" .. lol

You can get hit by a car by walking over the street, you know ?

[njs811]

Guys cheap spr at Bittrex!!!

When public pool up it will be better to mine so wait and mine instead of buy.  Everyone will have chance to mine not just big farm.

Its already public, just msg me which miners you need and i'll send them to you

What do you mean which miners? And I would be careful. Pools running SPR have the ability to steal your coins!

huh ? How should I steal the coins ? And why ? The pool is free, the miners are "standard-miners" like ccminer/sgminer and you can always watch your stats in the miner and at the pool i.e. found blocks etc. so there is very low danger of "pools stealing coins" .. lol

You can get hit by a car by walking over the street, you know ?

Nice try, but SPR is designed to allow anyone in the pool to steal coins. You would have a better chance of running across a busy 10 lane highway, than mining in a pool.