usukan
Legendary
Offline
Activity: 1590
Merit: 1002
|
|
November 09, 2014, 12:26:50 AM Last edit: November 09, 2014, 12:40:06 AM by usukan |
|
This "one-click" mining discussion cracks me up..........
Yeah we don't want non-technical people in THIS coin - and besides the technical dudes who have done most of the mining to date need to have the lions share of future distributions. Thats perfectly obvious to all. Its not centralisation at all - its just a select group of the elite producing supply - its not like we are printing money or anything!
Lets change the name to MOC - Miners Only Coin - so any newcomers really get the clear message to "back off".
This is the best strategy to ensure distributed ownership and mass adoption so that UTC can be a grand success.
Best we make everyone pass a very demanding set of technical tests first, to earn the right to mine - we just can't afford to have any plumbers, bakers or truck drivers owning, trading or God forbid "mining our coin".
This one-click miner is a very dangerous idea - it cuts right to the basis of everything we stand for at UTC - can we make it much harder to mine please? - I just don't want to share it with any more people at all AND we need to limit the supply as much as possible so the price goes way up - THEN sell to those idiot non-technical believers before they realise that they were suckered.
|
--
--
|
|
|
Kracko
|
|
November 09, 2014, 12:31:51 AM |
|
There are already real uses for Ultracoin, and we get accepted by more and more businesses every week, of course, this trend needs to exponentially increased for Ultracoin to stay relevant which I am working on. However, if 90% of the Ultracoin is held in the hands of a small group (less than a thousand people) then how can we expect Ultracoin to remain decentralized? Do early adopters reap benefits? Of course, however, early adopters also include non-technical users that just want to mine with their GPU or gaming PC. Cryptocurrencies should not be be reserved for tech savvy individuals, a lot of the older generations control much of the wealth and commerce, and they too need to be involved. Not to mention that less tech savvy miners are going to be equipped with much less hash power (a GPU or two). If we want Ultracoin to be used for real world purposes, we need an economy, and to create that economy, we need more stakeholders. If not, Ultracoin will be centralized into the hands of the few, and with Scrypt-ChaCha, almost anybody can mine Ultracoin later down the road. Early adopters are still rewarded, but in this next step of Ultracoin's evolution we need more miners, users and businesses to use it.
There are already users that accept Ultracoin, for a larger list, check out the Use Ultracoin business directory or our Coinpayments directory: http://useultracoin.com/ | https://www.coinpayments.net/store-directory-coin-UTC
And I still encourage users to participate in creating paper tip wallets and loading them with Ultracoin, this is an almost guaranteed way to get people into Ultracoin and only costs a few dollars and some time: http://tumblingblock.com/generate-wallet.html (Will be updated to the new logo soon)
We cannot afford to keep our community small forever, we must expand or we will become irrelevant in time. This next step ensures vitality into our future. The more people using Ultracoin, the more vibrant the economy, thus the more volume, acceptance, value, etc.
The one click miner will hook up to the multi-pool by default, this will increase buy support, however their will be options to mine Ultracoin directly as well. This is important from an investors perspective, especially when investors possess minimum knowledge on how to mine. They do not want to mine coins that are being dumped as that sends a bad message, however both options are there.
Sincerely,
Steven "Rapture" Management Director Steven@Ultracoin.net Ultracoin Team The logo, front and back images of the default design have been updated in the paper wallet generator. Enjoy!
|
|
|
|
Kracko
|
|
November 09, 2014, 01:45:57 AM |
|
Hmm, dunno why, but when I run your settings 2 of my 6 cards run at 1.4 - 2.0 kh/s. The rest run at 3.43. The rig is with 8 gigs of ram, so the ram should't be the issue.
I get the same low hash on windows 8 but on vista I always get 3.5. Some thing about windows itself. It is good to realize that Nvidia needs lot of more trafic between main board (chipset, CPU, memory) and GPU than AMD. Perhaps bottle neck come there just as one possible suspect about why. What is HW combination what can really handle 6x GPU using maximal/enough datastream speed for all these. AMD (O. CL) do not care example if use 1x risers (due to much less needed data trafic thru PCI-E). But Nvidia (Cuda) start suffer even in fastest HW system if use 1x communication with PCI-E. What HW (it need also look how CPU itself is related to this) is designed for handle with real full speed 6x Nvidia GPU data trafic through PCI-E. And still we are with easy Nfactor 14. Also operating system may affect due to things how they share resources. I tried everything, single card to 6 cards and same thing. Are you using any of your mining cards to drive a monitor? That's a performance hit too. You actually get less warps because of the memory taken to run a screen. Do all the cards have adequate power? Make sure you are using the latest version of CudaMiner too. Earlier this year the Keccak portion had to be done single-threaded by CPU. Now, most everything can be offloaded into the GPUs. I'm using Ubuntu Server 14.04. It's still not perfect. I always seem to have at least one card lagging a bit on each of my rigs- but not more than 10-15% from the highest at times. Earlier versions of CudaMiner performed part of the algos by CPU. I get 19-21khash on each 6 card rig. Intel Celeron G1850 Dual Core 2.9GHz ASRock H81 Pro EVGA 750ti ACX Version (with 6pin power jacks) 3-4 each server EVGA 750ti Non-ACX Version 2-3 each server PCIe 1x Powered Risers ( http://www.newegg.com/Product/Product.aspx?Item=9SIA32C1EC4586) You get plenty of adapters that come with the 1x risers so you can convert SATA and the 4-pin molex connectors to 6pin PCIe power jacks and to power the risers. I recommend at least a 650W PSU, single 12v rail. Make sure it has enough SATA and 4 pin connectors to run a 4 pin molex to each card and a 6pin PCIe connector to the top of the GPU. For the most part I dedicated 1 line off the PSU to powering the riser and the GPU. With a 2-3 non-ACX cards running off the powered risers. I have all six running on each of my rigs. I wouldn't try to run more than one non-ACX style GPU in a setup without a powered riser as it will go beyond PCIe power specs (75W) and you run the risk of frying the traces in your mobo.
|
|
|
|
tbearhere
Legendary
Offline
Activity: 3178
Merit: 1003
|
|
November 09, 2014, 02:07:12 AM |
|
Hmm, dunno why, but when I run your settings 2 of my 6 cards run at 1.4 - 2.0 kh/s. The rest run at 3.43. The rig is with 8 gigs of ram, so the ram should't be the issue.
I get the same low hash on windows 8 but on vista I always get 3.5. Some thing about windows itself. It is good to realize that Nvidia needs lot of more trafic between main board (chipset, CPU, memory) and GPU than AMD. Perhaps bottle neck come there just as one possible suspect about why. What is HW combination what can really handle 6x GPU using maximal/enough datastream speed for all these. AMD (O. CL) do not care example if use 1x risers (due to much less needed data trafic thru PCI-E). But Nvidia (Cuda) start suffer even in fastest HW system if use 1x communication with PCI-E. What HW (it need also look how CPU itself is related to this) is designed for handle with real full speed 6x Nvidia GPU data trafic through PCI-E. And still we are with easy Nfactor 14. Also operating system may affect due to things how they share resources. I tried everything, single card to 6 cards and same thing. Are you using any of your mining cards to drive a monitor? That's a performance hit too. You actually get less warps because of the memory taken to run a screen. Do all the cards have adequate power? Make sure you are using the latest version of CudaMiner too. Earlier this year the Keccak portion had to be done single-threaded by CPU. Now, most everything can be offloaded into the GPUs. I'm using Ubuntu Server 14.04. It's still not perfect. I always seem to have at least one card lagging a bit on each of my rigs- but not more than 10-15% from the highest at times. Earlier versions of CudaMiner performed part of the algos by CPU. I get 19-21khash on each 6 card rig. Intel Celeron G1850 Dual Core 2.9GHz ASRock H81 Pro EVGA 750ti ACX Version (with 6pin power jacks) 3-4 each server EVGA 750ti Non-ACX Version 2-3 each server PCIe 1x Powered Risers ( http://www.newegg.com/Product/Product.aspx?Item=9SIA32C1EC4586) You get plenty of adapters that come with the 1x risers so you can convert SATA and the 4-pin molex connectors to 6pin PCIe power jacks and to power the risers. I recommend at least a 650W PSU, single 12v rail. Make sure it has enough SATA and 4 pin connectors to run a 4 pin molex to each card and a 6pin PCIe connector to the top of the GPU. For the most part I dedicated 1 line off the PSU to powering the riser and the GPU. With a 2-3 non-ACX cards running off the powered risers. I have all six running on each of my rigs. I wouldn't try to run more than one non-ACX style GPU in a setup without a powered riser as it will go beyond PCIe power specs (75W) and you run the risk of frying the traces in your mobo. thanks all that what you said was done and more. but still nothing works to get it to 3.6 mh/s. at this point windows vista will do it windows 8 wont and that is the only thing that works to get 3.6 . i wonder what it is about vista.
|
|
|
|
usukan
Legendary
Offline
Activity: 1590
Merit: 1002
|
|
November 09, 2014, 08:59:12 AM |
|
Sorry for any confusion here this was "satire" - a particular style of writing to make a point with intrigue Basically a joke All bullshit actually satire noun the use of humour, irony, exaggeration, or ridicule to expose and criticize people's stupidity or vices, particularly in the context of contemporary politics and other topical issues. Please bring on the one-click miner This "one-click" mining discussion cracks me up..........
Yeah we don't want non-technical people in THIS coin - and besides the technical dudes who have done most of the mining to date need to have the lions share of future distributions. Thats perfectly obvious to all. Its not centralisation at all - its just a select group of the elite producing supply - its not like we are printing money or anything!
Lets change the name to MOC - Miners Only Coin - so any newcomers really get the clear message to "back off".
This is the best strategy to ensure distributed ownership and mass adoption so that UTC can be a grand success.
Best we make everyone pass a very demanding set of technical tests first, to earn the right to mine - we just can't afford to have any plumbers, bakers or truck drivers owning, trading or God forbid "mining our coin".
This one-click miner is a very dangerous idea - it cuts right to the basis of everything we stand for at UTC - can we make it much harder to mine please? - I just don't want to share it with any more people at all AND we need to limit the supply as much as possible so the price goes way up - THEN sell to those idiot non-technical believers before they realise that they were suckered.
I Agree 100% with you
|
--
--
|
|
|
Namsbreh
|
|
November 09, 2014, 09:27:01 AM |
|
I'll shut-up then!
|
|
|
|
funsponge
|
|
November 09, 2014, 11:46:38 AM |
|
Sorry for any confusion here this was "satire" - a particular style of writing to make a point with intrigue Basically a joke All bullshit actually satire noun the use of humour, irony, exaggeration, or ridicule to expose and criticize people's stupidity or vices, particularly in the context of contemporary politics and other topical issues. Please bring on the one-click miner This "one-click" mining discussion cracks me up..........
Yeah we don't want non-technical people in THIS coin - and besides the technical dudes who have done most of the mining to date need to have the lions share of future distributions. Thats perfectly obvious to all. Its not centralisation at all - its just a select group of the elite producing supply - its not like we are printing money or anything!
Lets change the name to MOC - Miners Only Coin - so any newcomers really get the clear message to "back off".
This is the best strategy to ensure distributed ownership and mass adoption so that UTC can be a grand success.
Best we make everyone pass a very demanding set of technical tests first, to earn the right to mine - we just can't afford to have any plumbers, bakers or truck drivers owning, trading or God forbid "mining our coin".
This one-click miner is a very dangerous idea - it cuts right to the basis of everything we stand for at UTC - can we make it much harder to mine please? - I just don't want to share it with any more people at all AND we need to limit the supply as much as possible so the price goes way up - THEN sell to those idiot non-technical believers before they realise that they were suckered.
I Agree 100% with you
I got it! Bring on the one click mining and let's get spreading the word ! Hopefully this will introduce 1000's of newcomers and also attract the redit users and 'under 18's' markets. Perhaps a YouTube video could be done to explain it.
|
|
|
|
volyova
Legendary
Offline
Activity: 910
Merit: 1000
|
|
November 09, 2014, 12:46:12 PM |
|
Sorry for any confusion here this was "satire" - a particular style of writing to make a point with intrigue Basically a joke All bullshit actually satire noun the use of humour, irony, exaggeration, or ridicule to expose and criticize people's stupidity or vices, particularly in the context of contemporary politics and other topical issues. Please bring on the one-click miner This "one-click" mining discussion cracks me up..........
Yeah we don't want non-technical people in THIS coin - and besides the technical dudes who have done most of the mining to date need to have the lions share of future distributions. Thats perfectly obvious to all. Its not centralisation at all - its just a select group of the elite producing supply - its not like we are printing money or anything!
Lets change the name to MOC - Miners Only Coin - so any newcomers really get the clear message to "back off".
This is the best strategy to ensure distributed ownership and mass adoption so that UTC can be a grand success.
Best we make everyone pass a very demanding set of technical tests first, to earn the right to mine - we just can't afford to have any plumbers, bakers or truck drivers owning, trading or God forbid "mining our coin".
This one-click miner is a very dangerous idea - it cuts right to the basis of everything we stand for at UTC - can we make it much harder to mine please? - I just don't want to share it with any more people at all AND we need to limit the supply as much as possible so the price goes way up - THEN sell to those idiot non-technical believers before they realise that they were suckered.
I Agree 100% with you
Ha ha...kind of backfired..
|
|
|
|
750Ti 1GB
Newbie
Offline
Activity: 20
Merit: 0
|
|
November 09, 2014, 02:17:57 PM |
|
New purse (1.0.4.1) does not work.
|
|
|
|
volyova
Legendary
Offline
Activity: 910
Merit: 1000
|
|
November 09, 2014, 05:27:36 PM |
|
Wow! UTC has gone up a lot lately!
|
|
|
|
|
fabietech
|
|
November 09, 2014, 08:58:02 PM |
|
Keep on loving the second logo briljant Job!
|
|
|
|
fabietech
|
|
November 09, 2014, 08:58:27 PM |
|
I wonder if we would surpass any time the 1Million marketcap as we are toss and turning around 500k-700k and never go higher than that...if we can demolish this wall of 6 btc and surpass 0.00012-13....we maybe we can reach out the desired 0.0002-3 level stability for ultracoin....cheers for the new logo So the wall is gone so lets see UTC grow on marketcap
|
|
|
|
volyova
Legendary
Offline
Activity: 910
Merit: 1000
|
|
November 09, 2014, 09:46:01 PM |
|
I wonder if we would surpass any time the 1Million marketcap as we are toss and turning around 500k-700k and never go higher than that...if we can demolish this wall of 6 btc and surpass 0.00012-13....we maybe we can reach out the desired 0.0002-3 level stability for ultracoin....cheers for the new logo So the wall is gone so lets see UTC grow on marketcap It IS doing! UTC went up a lot today. 22% I think.
|
|
|
|
tbearhere
Legendary
Offline
Activity: 3178
Merit: 1003
|
|
November 10, 2014, 01:55:02 PM |
|
Hmm, dunno why, but when I run your settings 2 of my 6 cards run at 1.4 - 2.0 kh/s. The rest run at 3.43. The rig is with 8 gigs of ram, so the ram should't be the issue.
I get the same low hash on windows 8 but on vista I always get 3.5. Some thing about windows itself. It is good to realize that Nvidia needs lot of more trafic between main board (chipset, CPU, memory) and GPU than AMD. Perhaps bottle neck come there just as one possible suspect about why. What is HW combination what can really handle 6x GPU using maximal/enough datastream speed for all these. AMD (O. CL) do not care example if use 1x risers (due to much less needed data trafic thru PCI-E). But Nvidia (Cuda) start suffer even in fastest HW system if use 1x communication with PCI-E. What HW (it need also look how CPU itself is related to this) is designed for handle with real full speed 6x Nvidia GPU data trafic through PCI-E. And still we are with easy Nfactor 14. Also operating system may affect due to things how they share resources. I tried everything, single card to 6 cards and same thing. Are you using any of your mining cards to drive a monitor? That's a performance hit too. You actually get less warps because of the memory taken to run a screen. Do all the cards have adequate power? Make sure you are using the latest version of CudaMiner too. Earlier this year the Keccak portion had to be done single-threaded by CPU. Now, most everything can be offloaded into the GPUs. I'm using Ubuntu Server 14.04. It's still not perfect. I always seem to have at least one card lagging a bit on each of my rigs- but not more than 10-15% from the highest at times. Earlier versions of CudaMiner performed part of the algos by CPU. I get 19-21khash on each 6 card rig. Intel Celeron G1850 Dual Core 2.9GHz ASRock H81 Pro EVGA 750ti ACX Version (with 6pin power jacks) 3-4 each server EVGA 750ti Non-ACX Version 2-3 each server PCIe 1x Powered Risers ( http://www.newegg.com/Product/Product.aspx?Item=9SIA32C1EC4586) You get plenty of adapters that come with the 1x risers so you can convert SATA and the 4-pin molex connectors to 6pin PCIe power jacks and to power the risers. I recommend at least a 650W PSU, single 12v rail. Make sure it has enough SATA and 4 pin connectors to run a 4 pin molex to each card and a 6pin PCIe connector to the top of the GPU. For the most part I dedicated 1 line off the PSU to powering the riser and the GPU. With a 2-3 non-ACX cards running off the powered risers. I have all six running on each of my rigs. I wouldn't try to run more than one non-ACX style GPU in a setup without a powered riser as it will go beyond PCIe power specs (75W) and you run the risk of frying the traces in your mobo. you can get 10 PCIe 1x Powered Risers for ~$ 50 on amazon o and it is windows 8 for some reason for the low hash rate.
|
|
|
|
ivcelmik
|
|
November 10, 2014, 07:07:17 PM |
|
Hmm, dunno why, but when I run your settings 2 of my 6 cards run at 1.4 - 2.0 kh/s. The rest run at 3.43. The rig is with 8 gigs of ram, so the ram should't be the issue.
I get the same low hash on windows 8 but on vista I always get 3.5. Some thing about windows itself. It is good to realize that Nvidia needs lot of more trafic between main board (chipset, CPU, memory) and GPU than AMD. Perhaps bottle neck come there just as one possible suspect about why. What is HW combination what can really handle 6x GPU using maximal/enough datastream speed for all these. AMD (O. CL) do not care example if use 1x risers (due to much less needed data trafic thru PCI-E). But Nvidia (Cuda) start suffer even in fastest HW system if use 1x communication with PCI-E. What HW (it need also look how CPU itself is related to this) is designed for handle with real full speed 6x Nvidia GPU data trafic through PCI-E. And still we are with easy Nfactor 14. Also operating system may affect due to things how they share resources. I tried everything, single card to 6 cards and same thing. Are you using any of your mining cards to drive a monitor? That's a performance hit too. You actually get less warps because of the memory taken to run a screen. Do all the cards have adequate power? Make sure you are using the latest version of CudaMiner too. Earlier this year the Keccak portion had to be done single-threaded by CPU. Now, most everything can be offloaded into the GPUs. I'm using Ubuntu Server 14.04. It's still not perfect. I always seem to have at least one card lagging a bit on each of my rigs- but not more than 10-15% from the highest at times. Earlier versions of CudaMiner performed part of the algos by CPU. I get 19-21khash on each 6 card rig. Intel Celeron G1850 Dual Core 2.9GHz ASRock H81 Pro EVGA 750ti ACX Version (with 6pin power jacks) 3-4 each server EVGA 750ti Non-ACX Version 2-3 each server PCIe 1x Powered Risers ( http://www.newegg.com/Product/Product.aspx?Item=9SIA32C1EC4586) You get plenty of adapters that come with the 1x risers so you can convert SATA and the 4-pin molex connectors to 6pin PCIe power jacks and to power the risers. I recommend at least a 650W PSU, single 12v rail. Make sure it has enough SATA and 4 pin connectors to run a 4 pin molex to each card and a 6pin PCIe connector to the top of the GPU. For the most part I dedicated 1 line off the PSU to powering the riser and the GPU. With a 2-3 non-ACX cards running off the powered risers. I have all six running on each of my rigs. I wouldn't try to run more than one non-ACX style GPU in a setup without a powered riser as it will go beyond PCIe power specs (75W) and you run the risk of frying the traces in your mobo. you can get 10 PCIe 1x Powered Risers for ~$ 50 on amazon o and it is windows 8 for some reason for the low hash rate. Can someone help me with the .bat file for 750 Ti Thx in advance
|
|
|
|
tbearhere
Legendary
Offline
Activity: 3178
Merit: 1003
|
|
November 10, 2014, 10:06:35 PM |
|
[/quote]
Can someone help me with the .bat file for 750 Ti
Thx in advance [/quote] for Windows ?
|
|
|
|
Kracko
|
|
November 10, 2014, 10:15:56 PM |
|
Hmm, dunno why, but when I run your settings 2 of my 6 cards run at 1.4 - 2.0 kh/s. The rest run at 3.43. The rig is with 8 gigs of ram, so the ram should't be the issue.
I get the same low hash on windows 8 but on vista I always get 3.5. Some thing about windows itself. It is good to realize that Nvidia needs lot of more trafic between main board (chipset, CPU, memory) and GPU than AMD. Perhaps bottle neck come there just as one possible suspect about why. What is HW combination what can really handle 6x GPU using maximal/enough datastream speed for all these. AMD (O. CL) do not care example if use 1x risers (due to much less needed data trafic thru PCI-E). But Nvidia (Cuda) start suffer even in fastest HW system if use 1x communication with PCI-E. What HW (it need also look how CPU itself is related to this) is designed for handle with real full speed 6x Nvidia GPU data trafic through PCI-E. And still we are with easy Nfactor 14. Also operating system may affect due to things how they share resources. I tried everything, single card to 6 cards and same thing. Are you using any of your mining cards to drive a monitor? That's a performance hit too. You actually get less warps because of the memory taken to run a screen. Do all the cards have adequate power? Make sure you are using the latest version of CudaMiner too. Earlier this year the Keccak portion had to be done single-threaded by CPU. Now, most everything can be offloaded into the GPUs. I'm using Ubuntu Server 14.04. It's still not perfect. I always seem to have at least one card lagging a bit on each of my rigs- but not more than 10-15% from the highest at times. Earlier versions of CudaMiner performed part of the algos by CPU. I get 19-21khash on each 6 card rig. Intel Celeron G1850 Dual Core 2.9GHz ASRock H81 Pro EVGA 750ti ACX Version (with 6pin power jacks) 3-4 each server EVGA 750ti Non-ACX Version 2-3 each server PCIe 1x Powered Risers ( http://www.newegg.com/Product/Product.aspx?Item=9SIA32C1EC4586) You get plenty of adapters that come with the 1x risers so you can convert SATA and the 4-pin molex connectors to 6pin PCIe power jacks and to power the risers. I recommend at least a 650W PSU, single 12v rail. Make sure it has enough SATA and 4 pin connectors to run a 4 pin molex to each card and a 6pin PCIe connector to the top of the GPU. For the most part I dedicated 1 line off the PSU to powering the riser and the GPU. With a 2-3 non-ACX cards running off the powered risers. I have all six running on each of my rigs. I wouldn't try to run more than one non-ACX style GPU in a setup without a powered riser as it will go beyond PCIe power specs (75W) and you run the risk of frying the traces in your mobo. you can get 10 PCIe 1x Powered Risers for ~$ 50 on amazon o and it is windows 8 for some reason for the low hash rate. Don't use Windows 8 then. Another thing to try is a 16x to 16x riser: http://www.amazon.com/Powered-Flexible-Extender-Bitcoin-Mining/dp/B00CQB1RIU
|
|
|
|
tbearhere
Legendary
Offline
Activity: 3178
Merit: 1003
|
|
November 10, 2014, 10:35:02 PM |
|
Hmm, dunno why, but when I run your settings 2 of my 6 cards run at 1.4 - 2.0 kh/s. The rest run at 3.43. The rig is with 8 gigs of ram, so the ram should't be the issue.
I get the same low hash on windows 8 but on vista I always get 3.5. Some thing about windows itself. It is good to realize that Nvidia needs lot of more trafic between main board (chipset, CPU, memory) and GPU than AMD. Perhaps bottle neck come there just as one possible suspect about why. What is HW combination what can really handle 6x GPU using maximal/enough datastream speed for all these. AMD (O. CL) do not care example if use 1x risers (due to much less needed data trafic thru PCI-E). But Nvidia (Cuda) start suffer even in fastest HW system if use 1x communication with PCI-E. What HW (it need also look how CPU itself is related to this) is designed for handle with real full speed 6x Nvidia GPU data trafic through PCI-E. And still we are with easy Nfactor 14. Also operating system may affect due to things how they share resources. I tried everything, single card to 6 cards and same thing. Are you using any of your mining cards to drive a monitor? That's a performance hit too. You actually get less warps because of the memory taken to run a screen. Do all the cards have adequate power? Make sure you are using the latest version of CudaMiner too. Earlier this year the Keccak portion had to be done single-threaded by CPU. Now, most everything can be offloaded into the GPUs. I'm using Ubuntu Server 14.04. It's still not perfect. I always seem to have at least one card lagging a bit on each of my rigs- but not more than 10-15% from the highest at times. Earlier versions of CudaMiner performed part of the algos by CPU. I get 19-21khash on each 6 card rig. Intel Celeron G1850 Dual Core 2.9GHz ASRock H81 Pro EVGA 750ti ACX Version (with 6pin power jacks) 3-4 each server EVGA 750ti Non-ACX Version 2-3 each server PCIe 1x Powered Risers ( http://www.newegg.com/Product/Product.aspx?Item=9SIA32C1EC4586) You get plenty of adapters that come with the 1x risers so you can convert SATA and the 4-pin molex connectors to 6pin PCIe power jacks and to power the risers. I recommend at least a 650W PSU, single 12v rail. Make sure it has enough SATA and 4 pin connectors to run a 4 pin molex to each card and a 6pin PCIe connector to the top of the GPU. For the most part I dedicated 1 line off the PSU to powering the riser and the GPU. With a 2-3 non-ACX cards running off the powered risers. I have all six running on each of my rigs. I wouldn't try to run more than one non-ACX style GPU in a setup without a powered riser as it will go beyond PCIe power specs (75W) and you run the risk of frying the traces in your mobo. you can get 10 PCIe 1x Powered Risers for ~$ 50 on amazon o and it is windows 8 for some reason for the low hash rate. Don't use Windows 8 then. Another thing to try is a 16x to 16x riser: http://www.amazon.com/Powered-Flexible-Extender-Bitcoin-Mining/dp/B00CQB1RIUI had a single card in the mobo..no change. i use usb power risers.
|
|
|
|
usukan
Legendary
Offline
Activity: 1590
Merit: 1002
|
|
November 11, 2014, 05:33:06 AM |
|
UTC needs an Android wallet - urgently Its crazy at this stage that it still does not have one. Its essential for mass adoption and day to day use of the coin for "real world" things - on the run. and of course an IPhone equivalent AND if you have got some spare time - check this out. Its the simplest wallet you might ever imagine. It really works. http://cryptap.us/myr/jswallet/ anyone can use this in about 15 seconds Personally I was stunned when I discovered this one.
|
--
--
|
|
|
|