[ANN] ccminer 2.3 - opensource - GPL (tpruvot)

[antantti]

Yes it was the main reason for the 5%.

I still need to compute them

To be honest I thought 5% doesn't include tx fee 

BTW, what is the real minimum payout? Lowest I have been payed so far is 0.81 DCR 

[1713493720]

1713493720

[1713493720]

1713493720

[Epsylon3]

all is explained on the main page... and now, sunday evening, its the minimum allowed by the wallet without "dust" error : 0.025

currently building a 1.7.4 (too much mess with the different 1.7.3)

[Epsylon3]

seems there is a big issue with tx fees on this wallet... i may have to restart soon to upgrade to the v0.0.5

i get amounts like 1.5 DCR of tx fees for a 18 DCR payout (sent to a different address each time)

[2016-02-28 06:43:43] paying 54.29900701 DCR
[2016-02-28 10:46:07] paying 35.79586724 DCR
[2016-02-28 12:48:28] paying 17.96769547 DCR
[2016-02-28 14:49:48] paying 36.33132658 DCR
[2016-02-28 16:53:48] paying 36.13312009 DCR
[2016-02-28 20:58:24] paying 18.01496387 DCR

last two txs are :
https://mainnet.decred.org/tx/a6322c3353a9d824ee968fe1050af9189e99548135c00a2936b634cb3d944c7a

https://mainnet.decred.org/tx/2817981d574fd871e71cdfc3023abb59e6c9fd8cc28e2af8c1b8df675affe76c
or http://yiimp.ccminer.org/explorer?id=1574&txid=2817981d574fd871e71cdfc3023abb59e6c9fd8cc28e2af8c1b8df675affe76c (to see the total input)

Dsm2c5Ya7YVh6nDJp4jkp98QW78Jgt4joww (1.43267535) seems to be a tx fee (not a miner)

[DragonSlayer]

Are we able to use amd cards on the pool too?  I am thinking about pointing my 7GH to your pool.

[Epsylon3]

Hmm sorry not for the moment, no public cgminer/sgminer yet, that might change in a near future.

Ok.. this fees problems and the wallet upgrade/test has delayed a bit my ccminer 1.7.4 also...

[bensam1231]

One thing came to my mind, if you have set really low auto payout treshold then relatively high tx fees eat 4 x 0.05= 0.2 DCR from your daily earnings.

Yup, I have mine set to payout about once per day since the transmission fees are so high.

[bensam1231]

After looking around at MN and Suprnova and trying a few different things, it definitely seemps like Yiimp is the best. Normal getwork seems to result in a ton of duplicate shares and occasionally I get 'nethash error' or something like that, basically a 20% loss in efficiency on both of those pools. Stratum seems to work right on Suprnova, but it doesn't report the right hashrate and the income as such is quite low (about 30% less then it should be). On MN pool they changed something yesterday and now after a few submits the stratum difficulty always goes to 320, which is too high for almost all miners and results in really sporadic submits and the hashrate/income also suffers again, about by 30%.

Yiimp is showing my correct hashrate, not sure about correct income though as we'll see over one-two days. It does suck Yiimp doesn't have as many stats as normal mining pools though. Seeing pool luck and efficiency are pretty basic stuff you need to see.

Curiously why is pool fees so high? If the pool pays TX fees, just have it payout like every 12 or 24hr. 2hrs is way too high, I'll probably lose like 5% per 2hr just for that if I'm paying TX fees.

Please change the payout rate for Decred to something more appropriate.


I still have yet to try maxminers and coinpool, but so far yiimp looks alright, but we'll see.

[Epsylon3]

what were your last amount received ? i mean, unlike mpos, the tx fees should not be taken from the miner balance (but in theory it should be a percent of the total tx fees, i need to double check how to do that)

A tx sent by yiimp includes many payouts... so the tx fees are not exactly the paytxfee/KB... one KB can be 5 payouts

else 2H is fine, that force the users to use a real wallet instead of directly mine and dump to an exchange

[myagui]

I would add that I also would prefer a 6h or even daily payout cycle. I don't think that anyone needs their coins so badly that they can't wait for a day tops to get their dumplings 

On the fees: I was one of the 1st users on the pool (actually, 1st user along with Epsy?). I very specifically requested a high fee to be set when Epsy was just getting the pool started. The rationale is that I mine at Yiimp because it is a very convenient vehicle to supporting the developer behind it, and as far as I recall, Epsy had no intentions of running a pool for the masses, since that also carries a bit more responsibility, more babysitting, etc.
It does happen that the masses have shown up, so there's that... 

Still, and just thinking from a practical standpoint: With Yiimp showing above average efficiency, even with above average fees, looks to be that the end result is better payouts for the miners. Maybe a rare win-win situation? 

[bensam1231]

Guessing it was because the pool wasn't finding blocks, but moved off the pool due to low payouts. Looking at the block find rate and comparing it to other pools such as Maxminers and coinmine, which have roughly the same hashrate, yiimp should be finding about 30% more blocks then it currently is over the last 48 to 72 hours. Not sure what that means, but definitely effects payouts.

Anyway, reduced Decred payouts, I'm moving back to Ethereum.

[bathrobehero]

else 2H is fine, that force the users to use a real wallet instead of directly mine and dump to an exchange

What makes you say that? I don't think that's true anymore.

I also think the payout frequency should be much lower. Decred's confirmation period is very long anyway.
Having tons of small payouts to a real wallet is a pain too.

[Epsylon3]

but yiimp is not for DCR only....

i delayed to 3h ... should not change a lot :p ...

[Vaccomondus]

i want to ask, is this version efficient like this from sp https://bitcointalk.org/index.php?topic=826901.0 ?

[myagui]

i want to ask, is this version efficient like this from sp https://bitcointalk.org/index.php?topic=826901.0 ?

Generally speaking, this version right here is considered by some (such as myself) to be the most efficient. SP_'s versions are a wee bit faster for some algorithms, but end up producing more invalid hashes or rejects, which then results in overall worse returns.

SP does have some private versions for sale, I think there's multiple posts about it in just about every page on the linked thread. Those might be worth it if you're into that sort of thing, and if you have enough hash power to really make up for the expense...

[sp_]

My version is faster but have some issues in solomining. If you mine on a pool you get 10-15% more coins with 1.5.74 / 1.5.78 in most algos. My private is up to 10% faster than the public(quark,lyra2v2).

I submit stale shares as default. If you have a slow connection you might get rejects. But my private farm is at 99.5% accepted.The nicehashminer is using my version 1.5.74 on maxwell cards because it is the fastest.

[djm34]

My version is faster but have some issues in solomining. If you mine on a pool you get 10-15% more coins with 1.5.74 / 1.5.78 in most algos. My private is up to 10% faster than the public(quark,lyra2v2).

I submit stale shares as default. If you have a slow connection you might get rejects. But my private farm is at 99.5% accepted.The nicehashminer is using my version 1.5.74 on maxwell cards because it is the fastest.

and _sp is the most modest dev

[Vaccomondus]

My version is faster but have some issues in solomining. If you mine on a pool you get 10-15% more coins with 1.5.74 / 1.5.78 in most algos. My private is up to 10% faster than the public(quark,lyra2v2).

I submit stale shares as default. If you have a slow connection you might get rejects. But my private farm is at 99.5% accepted.The nicehashminer is using my version 1.5.74 on maxwell cards because it is the fastest.

but your version is missing the most profitable algo, decred and ethereum, so it's pointless, when you add those?

[myagui]

^ Please move that discussion to the appropriate thread? It's bad enough to get the advertisements leaking over to this end 

[Vaccomondus]

ah sry i'll ask in the other thread

[sony87]

hi, what is the speed of a single 750ti card on Decred?