[ANN] ccminer 2.3 - opensource - GPL (tpruvot)

[The_Immortal]

Guys... Please... How to fix it?

result for nonce 27c0a4ae does not validate on CPU!

 

What does it mean?

Intesity is on the minimum - 8.
No OC at all (stock settings)!

Also I get

an illegal memory access was encountered cryptonight_extra_cpu_final line 235

Any ideas guys? Please....

[1713282910]

1713282910

[1713282910]

1713282910

[ltcnim]

2.2.2 does not work with btg @ suprnova?

[Amph]

2.2.2 does not work with btg @ suprnova?

read above he set the extranonce too high

[ltcnim]

2.2.2 does not work with btg @ suprnova?

read above he set the extranonce too high

ok thanks. I changed the check for the extranonce in the code hoping that it'll work, but shares are not accepted now (too low diff)
Haven't checked it any further, maybe not worth it anyway.

[crypto_trader#43xzEXrP]

Dec. 16th 2014  v1.5.1
                  Add lyra2RE algo for Vertcoin based on djm34/vtc code
                  Multiple shares support (2 for the moment)
                  X11 optimisations (From klaust and sp-hash)
                  HTML5 WebSocket api compatibility (see api/websocket.htm)
                  Solo mode height checks with getblocktemplate rpc calls

How to run solo mining with getblocktemplate method for equihash algorithm in ccminer tpruvot (Windows x64)?
I see only parameter for disable getblocktemplate method.
method get_work failed

get_work is a bit old. You should try getblocktemplate. Thats working on Windows and Unix.
Maybe your miner is not compatible with this command

Also, is there any cuda-miners with getblocktemplate for equihash and nvidia cards?

[pallas]

How to run solo mining with getblocktemplate method for equihash algorithm in ccminer tpruvot (Windows x64)?

ccminer doesn't support getblocktemplate.

[crypto_trader#43xzEXrP]

How to run solo mining with getblocktemplate method for equihash algorithm in ccminer tpruvot (Windows x64)?

ccminer doesn't support getblocktemplate.

Is there any win-x64 cuda miners with equihash, where getblocktemplate is supporting?
Can I install any getblocktemplate->get_work proxy or my own stratum server to use this bullsh~t?

[pallas]

Can I install any getblocktemplate->get_work proxy or my own stratum server to use this bullsh~t?

Try more polite.

[crypto_trader#43xzEXrP]

Can I install any getblocktemplate->get_work proxy or my own stratum server to use this bullsh~t?

Try more polite.

No, getwork is a good method. I'll using EWBF miner + power limit in Afterburner.

Just leave it here:
2017/11/15 18:46:24 Malformed stratum request from 127.0.0.1: invalid character 'P' looking for beginning of value
Need to fix it.

P.S. It's my bug, i did try to connect -o 127.0.0.1:PORT but need to use string -o stratum+tcp://127.0.0.1:PORT
Now ccminer is working and get_work method is working through getblocktemplate proxy.

Best regards.

[bensam1231]

Bitcore on yiimp seems to be going down every once in awhile, causes some of my miners to reset as well. Guessing some sort of ddos due to heavy load.

[sp_]

Bitcore on yiimp seems to be going down every once in awhile, causes some of my miners to reset as well. Guessing some sort of ddos due to heavy load.

the hashrate on the pool is reduced several times per day. Has been like this for days now.. Any comments from the pool operator? With these attacks you loose, 10-15% compared to the calculator if you mine @ yiimp.

[Epsylon3]

Just increased the initial diff, hope that can help...

[tbearhere]

@Epsylon3.... Are you planning to add cryptonight algo... coins to yiimp?

[Epsylon3]

no

[thecheapone]

I am a micro miner, one GPU card in my desktop computer, and no programmer, just an "end consumer".  I am using the precompiled windows 64 version of ccminer 2.2.2 from GitHub.  The miner works, but I am unable to increase the intensity level when scrypt mining.  No matter what intensity I set in the command line using the -i function, no matter where in the command line I put the -i function, and even though it initially assigns more threads, it then reverts to a different (?default) intensity a few lines down. My gpu doesn't even warm up, and the hash rate is low.  Rather than overclocking my GPU, I would prefer to increase the intensity so that it works harder.  How do I get it to actually run with the intensity settings I want? This is what I see:


D:\ccminer-x64-2.2.2-cuda9>ccminer-x64 -a scrypt -o stratum+tcp://us.multipool.us:XXX -u theXXX.1 -p XXX -i 14.99

*** ccminer 2.2.2 for nVidia GPUs by tpruvot@github ***
Built with VC++ 2013 and nVidia CUDA SDK 9.0 64-bits
Originally based on Christian Buchner and Christian H. project
Include some kernels from alexis78, djm34, djEzo, tsiv and krnlx.

BTC donation address: 1AJdfCpLWPNoAMDfHF1wD5y8VgKSSTHxPo (tpruvot)

[2017-11-08 06:34:23] Adding 16128 threads to intensity 14, 32512 cuda threads
[2017-11-08 06:34:23] Starting on stratum+tcp://us.multipool.us:XXX
[2017-11-08 06:34:23] NVML GPU monitoring enabled.
[2017-11-08 06:34:23] NVAPI GPU monitoring enabled.
[2017-11-08 06:34:23] 1 miner thread started, using 'scrypt' algorithm.
[2017-11-08 06:34:24] Stratum difficulty set to 131072 (2.00000)
[2017-11-08 06:34:24] scrypt block 1631827, diff 10898.083
[2017-11-08 06:34:25] GPU #0: 32 hashes / 4.0 MB per warp.
[2017-11-08 06:34:26] GPU #0: Performing auto-tuning, please wait 2 minutes...
[2017-11-08 06:34:26] GPU #0: maximum total warps (BxW): 1484
[2017-11-08 06:34:45] Stratum difficulty set to 256 (0.00391)
[2017-11-08 06:34:45] scrypt block 1631828, diff 8720.082
[2017-11-08 06:35:09] scrypt block 1631829, diff 8720.082
[2017-11-08 06:36:47] GPU #0: 589791.16 hash/s with configuration T12x11
[2017-11-08 06:39:34] scrypt block 1631830, diff 8720.082
[2017-11-08 06:39:34] GPU #0: using launch configuration T12x11
[2017-11-08 06:39:34] scrypt block 1631831, diff 8720.082
[2017-11-08 06:39:34] GPU #0: Intensity set to 12.0313, 4224 cuda threads
[2017-11-08 06:39:34] scrypt factor set to 9 (1024)

I XXX'd out the actual pool, worker name, password, but you can see where I attempted to set the intensity to 14.99 in the command line, was assigned extra threads, then lower down the intensity was changed to 12.0313 with only a fraction of the threads.  I have also tried with setting the T levels myself in advance, so that the auto-tuning does not occur, same result. Any help would be appreciated.  Thank you in advance.

Is there anyone who can help?

[scryptr]

GENERAL NOTE FOR SCRYPI/GPU MINING--

A miner will spend more on electricity than he will earn in cryptocoin.  If the coin is expected to increase in value enough to be profitable, purchase it on an exchange. There are other more profitable algorithms for GPU mining.

Try mining Equihash, Neoscrypt, or CryptoNight.  CCminer v2.2.2 does a good job selecting the proper configuration of CryptoNight on its own, no tuning required.  It is currently a top paying algorithm.

CCminer may be auto-selecting a tuning parameter for the above situation. Classical tuning parameters for scrypt are in the Readme, and somewhat forgotten.  ASIC miners are used for scrypt, only the newest versions can make a profit.  They produce 10X-100X times the hash of a GPU rig, or more.

--scryptr

[haslo]

My mining rig is running with the Nvidia driver version 384.xx..... Did anyone upgrade to version 388? Any speed changes (positive or negative)?

[startsts]

hi everyone, excuse me but latest version seems a little incompatible with node-stratum ( https://github.com/zone117x/node-stratum-pool )
I tried last version for different coins at nist5 and tribus algos and my pool shows lower hashrate then real. (lower in 2-3 times)
If I use ccminer-alexis pool shows right hashrate.

Can someone check that information, I can add any changes to stratum that needed

[concorde899]

Will this work to mine BTX using a 5x1070 Nvidia and Ubuntu 16.04?
Thanks for your reply.

[scryptr]

Will this work to mine BTX using a 5x1070 Nvidia and Ubuntu 16.04?
Thanks for your reply.

YES--

Read the Readme.  Set the algorithm and point it at a pool, like YIIMP.  If the cards perform well, make Intensity or clock adjustments.       --scryptr