[ANN] ccminer 2.3 - opensource - GPL (tpruvot)

[scryptr]

I want to get my rig information from another computer that in the same lan. Does ccminer has web api for monitoring? Can you give details how to configure it?

USE CCMINER MONITOR--

It can be found at "github.com/kbomba".  Written by Bombadil (kbomba), it will produce detailed charts and graphs.       --scryptr

[1713431860]

1713431860

[1713431860]

1713431860

[1713431860]

1713431860

[NameTaken]

I want to get my rig information from another computer that in the same lan. Does ccminer has web api for monitoring? Can you give details how to configure it?

USE CCMINER MONITOR--

It can be found at "github.com/kbomba".  Written by Bombadil (kbomba), it will produce detailed charts and graphs.       --scryptr

This one: https://github.com/KBomba/ccmonitor ?

Last update was 3 years ago and there are no instructions on how to use it.

[scryptr]

I want to get my rig information from another computer that in the same lan. Does ccminer has web api for monitoring? Can you give details how to configure it?

USE CCMINER MONITOR--

It can be found at "github.com/kbomba".  Written by Bombadil (kbomba), it will produce detailed charts and graphs.       --scryptr

This one: https://github.com/KBomba/ccmonitor ?

Last update was 3 years ago and there are no instructions on how to use it.

YOU MIGHT HAVE TO FIGURE IT OUT--

It isn't too hard.  It really works well, except with algo-switching rigs.  It was developed prior to the algo-switching craze and KBomba's return to college.  The API has not changed much.       --scryptr

[zecon]

Hello,

Getting this error when ./ccminer on Ubuntu 16.04 from a source build:

"Your system does not support CUDA 9.1 API!"

I took a look and please correct me, but the error should probably read "Your driver does not support..." instead of system as it seems to point to a driver mismatch with the sdk.

$ lsmod | grep -i nvidia
nvidia_uvm            667648  0
nvidia_drm             45056  0
nvidia_modeset        860160  1 nvidia_drm
nvidia              13139968  2 nvidia_modeset,nvidia_uvm
drm_kms_helper        167936  1 nvidia_drm
drm                   356352  3 nvidia_drm,drm_kms_helper

$ nvidia-smi  
+-----------------------------------------------------------------------------+
| NVIDIA-SMI 384.111                Driver Version: 384.111                   |
|-------------------------------+----------------------+----------------------+
| GPU  Name        Persistence-M| Bus-Id        Disp.A | Volatile Uncorr. ECC |
| Fan  Temp  Perf  Pwr:Usage/Cap|         Memory-Usage | GPU-Util  Compute M. |
|===============================+======================+======================|
|   0  GeForce GTX 1070    Off  | 00000000:01:00.0 Off |                  N/A |
|  0%   38C    P0    29W / 151W |      0MiB /  8108MiB |      0%      Default |
+-------------------------------+----------------------+----------------------+
                                                                              
+-----------------------------------------------------------------------------+
| Processes:                                                       GPU Memory |
|  GPU       PID   Type   Process name                             Usage      |
|=============================================================================|
|  No running processes found                                                 |
+-----------------------------------------------------------------------------+

Is there a particular package I should install (or not have installed)?

Thanks for your time!

[Epsylon3]

for cuda 9.1 you need the latest drivers... 390.x

just use cuda 8 or 9, you can install multiple cuda toolkits via the .run installer

[kirja23]

i'm very sorry, but where is the link for 2.2.5 version? i see it on the pools, but no on github. Thanks!

[niehues313]

Guys getting this error running ccminer on win10

[2018-01-21 11:08:25] GPU#0:an illegal instruction was encountered
[2018-01-21 11:08:25] GPU#0:target 0 fff00000 f
[2018-01-21 11:08:25] GPU#0:target ffff00000
Cuda error in func 'quark_blake512_cpu_setBlock_80' at line 871 : an illegal instruction was encountered.

now also getting this error:

[2018-01-21 14:07:36] GPU#0:an illegal memory access was encountered
[2018-01-21 14:07:36] GPU#0:target 0 fff00000 f
[2018-01-21 14:07:36] GPU#0:target ffff00000
Cuda error in func 'quark_blake512_cpu_setBlock_80' at line 871 : an illegal memory access was encountered.

ccminer.exe -a xevan -o stratum+tcp://s.umine.org:3739 -u mywallet -p c=XLRX

I have the latest nvidia drivers installed, still getting the error.

thanks !

[gzubeck]

Hi,

Please help me with setting. I have Intel Core i7 8700K / 16GB / Geforce GTX 1080 Ti
11GB. Using ccminer cuda sdk 9.0 64bit.

Can you please tell me how to optimize for my pc. I have changed some settings but no result. did change from -i 19,21 to 22,22 and from d=32 to d=64 and from cpu priority 3 to 4.
there are more to it in readme.txt but dont know which one to use for me.

I have no idea what I am doing.  

Do you have the right setting for my pc.

Thank you very much. hope you can help me.

mining BTX

I havent mined this but her's suprnova parameters...
It would be helpful to lookat the instructions for mining each pool...

ccminer -a bitcore -o stratum+tcp://btx.suprnova.cc:3629 -u Weblogin.Worker -p Worker password

[KiparisD]

CUDA 9.1 support from 388.71 version 

[FortuneNVirtue]

Could you please consider to add x16r algorithm (Ravencoin) into the ccminer?

https://bitcointalk.org/index.php?topic=2752467.0;all

[matey1111]

Can I use ccminer 2.2.4 with two different GPUs on one PC to mine togather ? For example 1 x 1050TI with 1 x 980TI ?

yes

[gzubeck]

Hi,

Please help me with setting. I have Intel Core i7 8700K / 16GB / Geforce GTX 1080 Ti
11GB. Using ccminer cuda sdk 9.0 64bit.

Can you please tell me how to optimize for my pc. I have changed some settings but no result. did change from -i 19,21 to 22,22 and from d=32 to d=64 and from cpu priority 3 to 4.
there are more to it in readme.txt but dont know which one to use for me.

I have no idea what I am doing.  

Do you have the right setting for my pc.

Thank you very much. hope you can help me.

mining BTX

I havent mined this but her's suprnova parameters...
It would be helpful to lookat the instructions for mining each pool...

ccminer -a bitcore -o stratum+tcp://btx.suprnova.cc:3629 -u Weblogin.Worker -p Worker password

thank you for the information. I will try to give more explanation to my question. I am mining at 1 GPU 1080ti. Its my gaming pc. Do I really need to set the settings that are based on CPU or Bios or motherboard or something else? I use ccminer cuda 9.0 specifically for GPU 1080ti, but the settings are not for my PC. Does ccminer have any impackt what pc I use (CPU or bios or motherboard or something else) I mean there are many different pc i7 i5 i3 with different cores or processor cache or has that nothing to do with my pc because I am mining on my GPU.

Example :

this is my settings  (ccminer-x64.exe -a bitcore -i 19,21 -o stratum+tcp://yiimp.eu:3556 -u 1G5XWMm8h8QK19ifcNWy3Rx79BX4NbjUNx -p d=32) Do I need to put more settings in based on my pc Intel Core i7 8700K / 16GB : Z370 Gaming Pro
Carbon

The only device you will be using is the one card. Does yiimp require you to set the intensity level? I think the difficulty level should be 16 vs. 32. Maybe if you had multiple 1080 ti s you would increase difficulty settings. See if yiimp has any recommended settings for their pool. the other biggy is that you need to select a pool which is relatively close. if your in north america you don't want to select a pool in europe and vice versa. Your going to have to experiment to make sure ccminer does not crash too often. The other major thing you have not mentioned is if your using msi afterburner. you need to download this and immediately reduce your power down to 70-72%. if your not your going to burn out your graphics card.

[revvv]

i add the -i command to my bat file but still ignore it.. it just change intensity on his own.. what i am doing wrong?

[onderdoor]

Hi,

Please help me with setting. I have Intel Core i7 8700K / 16GB / Geforce GTX 1080 Ti
11GB. Using ccminer cuda sdk 9.0 64bit.

Can you please tell me how to optimize for my pc. I have changed some settings but no result. did change from -i 19,21 to 22,22 and from d=32 to d=64 and from cpu priority 3 to 4.
there are more to it in readme.txt but dont know which one to use for me.

I have no idea what I am doing.  

Do you have the right setting for my pc.

Thank you very much. hope you can help me.

mining BTX

I havent mined this but her's suprnova parameters...
It would be helpful to lookat the instructions for mining each pool...

ccminer -a bitcore -o stratum+tcp://btx.suprnova.cc:3629 -u Weblogin.Worker -p Worker password

thank you for the information. I will try to give more explanation to my question. I am mining at 1 GPU 1080ti. Its my gaming pc. Do I really need to set the settings that are based on CPU or Bios or motherboard or something else? I use ccminer cuda 9.0 specifically for GPU 1080ti, but the settings are not for my PC. Does ccminer have any impackt what pc I use (CPU or bios or motherboard or something else) I mean there are many different pc i7 i5 i3 with different cores or processor cache or has that nothing to do with my pc because I am mining on my GPU.

Example :

this is my settings  (ccminer-x64.exe -a bitcore -i 19,21 -o stratum+tcp://yiimp.eu:3556 -u 1G5XWMm8h8QK19ifcNWy3Rx79BX4NbjUNx -p d=32) Do I need to put more settings in based on my pc Intel Core i7 8700K / 16GB : Z370 Gaming Pro
Carbon

The only device you will be using is the one card. Does yiimp require you to set the intensity level? I think the difficulty level should be 16 vs. 32. Maybe if you had multiple 1080 ti s you would increaseudifficulty settings. See if yiimp has any recommended settings for their pool. the other biggy is that you need to select a pool which is relatively close. if your in north america you don't want to select a pool in europe and vice versa. Your going to have to experiment to make sure ccminer does not crash too often. The other major thing you have not mentioned is if your using msi afterburner. you need to download this and immediately reduce your power down to 70-72%. if your not your going to burn out your graphics card.

How do I reduce my power- Memory Clock or CPU Clock or Power limit?

My current settings are in MSI afterburner core coltage 0, power limit 100, Core clock 0, Memory Clock 0, Fan speed auto.
using 250watt  CPU between 60celsius and 75c  GPU 68c and 70c
Thank you

[onderdoor]

Does anyone know. mining on CPU suprnova.cc. I have just started mining. When does statics displays on Dashboard. The cmd suprnova doesnt give any error, but cant see statics on Dashboard. does it need time ? or must it show when mining ?

Dashboard statics are all at 0% on there website suprnova.cc when login.

Thank you

[Tecumsehsamp]

Did anybody get ccminer working with Nvidia Tesla GPUs?

I tried it with a Tesla K80/M60? Whenever I try, it usually says what the latest block is but no mining activity.

[onderdoor]

Did anybody get ccminer working with Nvidia Tesla GPUs?

I tried it with a Tesla K80/M60? Whenever I try, it usually says what the latest block is but no mining activity.

I am not a expert but think your Tesla is to strong for the settings in or not compatible with mining. Try with high options bat file. dont ask me what to do. you card is just to high performance need to make high setting for your card. or it would not work properly. good luck

[Yorktown2018]

I'm getting 100% CPU utilization when using ccminer and mining Garlicoin...This is killing my hashrates on my 5 GTX 1070 Ti rig. (CPU: Intel G3920)


Is there a fix for this?

[gzubeck]

How do I reduce my power- Memory Clock or CPU Clock or Power limit?

My current settings are in MSI afterburner core coltage 0, power limit 100, Core clock 0, Memory Clock 0, Fan speed auto.
using 250watt  CPU between 60celsius and 75c  GPU 68c and 70c
Thank you

Set the power with the slider to 70-72%....for now I would leave the core clock and mem clock alone until you do some research on the algo your using. But your algo should not have to use full power for your graphics card which is a huge savings in itself. ccminer does not use your cpu for mining. I think? you never know with some future modifications...some miners use the cpu like cryptonight algos....I think with the poweer reduction we can get you down to 180-200 watts for your graphics and much reduced graphics temps.

[gzubeck]

Does anyone know. mining on CPU suprnova.cc. I have just started mining. When does statics displays on Dashboard. The cmd suprnova doesnt give any error, but cant see statics on Dashboard. does it need time ? or must it show when mining ?

Dashboard statics are all at 0% on there website suprnova.cc when login.

Thank you

Suprnovas dashboard has been weird for some time. I usually check my stats under my workers and general pool stats to make sure things are working.