hey guys wondering if you can give a new guy around here a hand been gpu mining for a while and its been going ok, i have since purchased 3 gridseed blades 40 chip. I believe ive configured everything correctly it just seems one pcb (correct terminology?) seems to be chucking out a lot of hw errors. just after ideas ive read many of the topics on this site and you guys seems to defiantly be on the ball which is why i choose this forum..
so far ive checked my config
im using coinotron pool (i know just temp for now)
the errors start after about 5 mins
checked usb plugs swapped them about along with power connector
even have a handy laser probe which measures surface temp says about 22c
im using cgminer 3 7 2 gridseed windows alt
strangely it seems to still be accepting jobs be a hardware fault or a random bug? its reached about 5000 hw after 2 hours
what freq do you use? 600, 650, 700, 750 ,800 ,825, 838, 850
keep setting it lower if you are above 800. also just run the 1 blade
if the blade set at 600 or 650 running alone has issues. different software and a different pool.
if you can not get it to work well you may have a poor 1/2 blade
