sp_ (OP)
Legendary
 Offline
Activity: 2940
Merit: 1087
Team Black developer
|
 |
January 03, 2015, 08:35:20 PM |
|
Yes its a nice speed but honestly Its not even worth running anymore. Nothing is profitable anymore.
too bad this miner comes soo late, it should have come in jackpot era at the very least Still possible to make a profit if you know how to use the software... Not without ridiculously cheap electricity as far as I can tell. Donate some beers, and I will tell you how to double your profit. 750ti just broke 6mh/s QUARK ALGO with #24 and my oc is still the same. How to double your profit?  The 290x is doing 5.6 Mhash@ stock clocks with the public miner.(quark) no leaked wolf0binaries on quark. in release 24 My 980 is doing 15.5 MHASh@quark on stock clocks. Almost 300% faster than Amd w290x the competition is sleeping %) |
|
|
|
scryptr
Legendary
Offline
Activity: 1797
Merit: 1028
|
|
January 03, 2015, 08:54:30 PM |
|
Does KlausT have his own thread? I tried to compile his version of ccminer today and got a syntax error on line 6631, something about token "fi" found.
I wanted to try his version because he has reportedly tackled a memory leak problem. One of my rigs has been crashing intermittantly, and I wanted to see if his version was more stable.
KlausT would be me  I can't remember having any syntax errors. The crashes are probably not the result of a memory leak, I think. What algo? Is it crashing after a few minutes, or does it take some hours? I was mining x11 with sp_'s versions of CCminer 1.5.1-git, v21-v24. I have two 750ti rigs, one with an AMD FX cpu, the other with an AMD Sempron 145. Both motherboards are identical, the FX rig has 6x EVGA FTW cards, the Sempron rig has 6x EVGA SC cards (no PCI plug). The faster (FX) rig handles v21-v24 with no problems. I am currently using tpruvot's v1.5.2-git on the slower rig, with a loss of 500kh/s for the total rig, but with stable performance. I managed to get a snap of the slower rig as it went from ~3000kh/s to ~300kh/s. It had been running v24 for an hour or less. At this point, if I issue a control-c shutdown command, it confirms the command but does not shut down. I have to perform a hard reset with the power switch:  I suspected a memory leak because the problem seems to "build-up", it isn't instantaneous. The problem began around v21-22, and took hours to occcur. --scryptr |
|
|
|
sp_ (OP)
Legendary
Offline
Activity: 2940
Merit: 1087
Team Black developer
|
|
January 03, 2015, 09:09:48 PM |
|
In version 24, when pressing crtrl-c the miner should wait 10 seconds before exit. Make sure you are building from the head on git, as I did some adjustments.
|
|
|
|
sp_ (OP)
Legendary
Offline
Activity: 2940
Merit: 1087
Team Black developer
|
|
January 03, 2015, 09:17:02 PM |
|
Yes its a nice speed but honestly Its not even worth running anymore. Nothing is profitable anymore.
too bad this miner comes soo late, it should have come in jackpot era at the very least Still possible to make a profit if you know how to use the software... Not without ridiculously cheap electricity as far as I can tell. Donate some beers, and I will tell you how to double your profit. 750ti just broke 6mh/s QUARK ALGO with #24 and my oc is still the same. How to double your profit? The 290x is doing 5.6 Mhash@ stock clocks with the public miner.(quark) no leaked wolf0binaries on quark. in release 24 My 980 is doing 15.5 MHASh@quark on stock clocks. Almost 300% faster than Amd w290x the competition is sleeping %) The competition didn't work on Quark  You should. Very profitable $) |
|
|
|
scryptr
Legendary
Offline
Activity: 1797
Merit: 1028
|
|
January 03, 2015, 09:27:57 PM |
|
In version 24, when pressing crtrl-c the miner should wait 10 seconds before exit. Make sure you are building from the head on git, as I did some adjustments.
"From the head"? Do you mean the "master" branch? --scryptr |
|
|
|
sp_ (OP)
Legendary
Offline
Activity: 2940
Merit: 1087
Team Black developer
|
|
January 03, 2015, 09:34:09 PM |
|
Yes.
Another thing. One of rigs was running an old version of the driver 443.11. And it crashed. When I updated the driver the rig was not crashin anymore.
You should upgrade to the latest driver( 23 dec) all my windows binaries are buildt with this driver.
|
|
|
|
scryptr
Legendary
Offline
Activity: 1797
Merit: 1028
|
|
January 03, 2015, 09:48:55 PM
Last edit: January 03, 2015, 10:26:22 PM by scryptr |
|
Yes.
Another thing. One of rigs was running an old version of the driver 443.11. And it crashed. When I updated the driver the rig was not crashin anymore.
You should upgrade to the latest driver( 23 dec) all my windows binaries are buildt with this driver.
My slower rig is running 346.22, my faster rig is running 340.29 (both Linux). I haven't changed drivers in my faster rig because it is stable. I will look at the drivers available for Linux again. I may reinstall identical versions of the OS. --scryptr EDIT: The latest releases for Linux are from Dec 8th. The stable version is 340.65, and the beta is 346.22. --scryptr |
|
|
|
chrysophylax
Legendary
Offline
Activity: 2870
Merit: 1091
--- ChainWorks Industries ---
|
|
January 04, 2015, 06:10:33 AM |
|
ive just pulled the latest from git and compiling now ... takes around 15mins to finish - so ill implement when it finishes ... will let you know what happens ... the current hashrate is as below ... ( just a straight copy and paste and is 5 seconds before i post this ) ... [2015-01-04 16:36:12] 192.168.0.205:3333/ x11 block 13382 [2015-01-04 16:36:12] GPU #3: GeForce GTX 750 Ti, 2742 kH/s [2015-01-04 16:36:12] GPU #0: GeForce GTX 750 Ti, 2690 kH/s [2015-01-04 16:36:12] GPU #5: GeForce GTX 750 Ti, 2694 kH/s [2015-01-04 16:36:12] GPU #2: GeForce GTX 750 Ti, 2697 kH/s [2015-01-04 16:36:12] GPU #4: GeForce GTX 750 Ti, 2696 kH/s [2015-01-04 16:36:12] GPU #1: GeForce GTX 750 Ti, 2696 kH/s [2015-01-04 16:36:45] 192.168.0.205:3333/ x11 block 13383 [2015-01-04 16:36:45] GPU #0: GeForce GTX 750 Ti, 2691 kH/s [2015-01-04 16:36:45] GPU #5: GeForce GTX 750 Ti, 2694 kH/s [2015-01-04 16:36:45] GPU #2: GeForce GTX 750 Ti, 2699 kH/s [2015-01-04 16:36:45] GPU #4: GeForce GTX 750 Ti, 2698 kH/s [2015-01-04 16:36:45] GPU #3: GeForce GTX 750 Ti, 2741 kH/s [2015-01-04 16:36:45] GPU #1: GeForce GTX 750 Ti, 2694 kH/s [2015-01-04 16:37:45] GPU #3: GeForce GTX 750 Ti, 2740 kH/s [2015-01-04 16:37:45] GPU #0: GeForce GTX 750 Ti, 2693 kH/s [2015-01-04 16:37:45] GPU #5: GeForce GTX 750 Ti, 2691 kH/s [2015-01-04 16:37:45] GPU #1: GeForce GTX 750 Ti, 2695 kH/s [2015-01-04 16:37:45] GPU #2: GeForce GTX 750 Ti, 2698 kH/s [2015-01-04 16:37:45] GPU #4: GeForce GTX 750 Ti, 2698 kH/s [2015-01-04 16:38:27] 192.168.0.205:3333/ x11 block 13384 [2015-01-04 16:38:27] GPU #0: GeForce GTX 750 Ti, 2690 kH/s [2015-01-04 16:38:27] GPU #2: GeForce GTX 750 Ti, 2699 kH/s [2015-01-04 16:38:27] GPU #4: GeForce GTX 750 Ti, 2697 kH/s [2015-01-04 16:38:27] GPU #3: GeForce GTX 750 Ti, 2740 kH/s [2015-01-04 16:38:27] GPU #1: GeForce GTX 750 Ti, 2697 kH/s [2015-01-04 16:38:28] GPU #5: GeForce GTX 750 Ti, 2695 kH/s [2015-01-04 16:39:27] GPU #4: GeForce GTX 750 Ti, 2698 kH/s [2015-01-04 16:39:27] GPU #0: GeForce GTX 750 Ti, 2691 kH/s [2015-01-04 16:39:27] GPU #3: GeForce GTX 750 Ti, 2741 kH/s [2015-01-04 16:39:27] GPU #1: GeForce GTX 750 Ti, 2696 kH/s [2015-01-04 16:39:27] GPU #2: GeForce GTX 750 Ti, 2697 kH/s [2015-01-04 16:39:27] GPU #5: GeForce GTX 750 Ti, 2694 kH/s [2015-01-04 16:39:53] GPU #0: GeForce GTX 750 Ti, 2691 kH/s [2015-01-04 16:39:56] accepted: 1420/1427 (99.51%), 16256 khash/s yay!!! gigatbyte 750ti oc ( powered ) stock with no intensity settings ... exact out put of drivers ... [root@ace-cm002 ~] $ rpm -qa \*nvidia\* kmod-nvidia-331.67-1.fc19.19.x86_64 kmod-nvidia-3.14.23-100.fc19.x86_64-331.67-1.fc19.19.x86_64 xorg-x11-drv-nvidia-libs-331.67-2.fc19.x86_64 xorg-x11-drv-nvidia-331.67-2.fc19.x86_64 ill post the new stats when the compilation finishes and has been running for 15mins ... no other changes to the system or drivers or settings - just the miner ... #crysx |
|
|
|
chrysophylax
Legendary
Offline
Activity: 2870
Merit: 1091
--- ChainWorks Industries ---
|
|
January 04, 2015, 07:48:58 AM |
|
well - conclusive for me on the intel based cpu system from the previous post ..
hashrate has been increasedand stability will be seen over the next 24 hours ... results below ... x11 ...
now to compile on the amd based cpu system ...
[2015-01-04 18:09:32] accepted: 11/12 (91.67%), 16265 khash/s yay!!!
[2015-01-04 18:09:35] GPU #2: GeForce GTX 750 Ti, 2705 kH/s
[2015-01-04 18:09:36] GPU #1: GeForce GTX 750 Ti, 2704 kH/s
[2015-01-04 18:09:36] GPU #4: GeForce GTX 750 Ti, 2704 kH/s
[2015-01-04 18:09:36] GPU #5: GeForce GTX 750 Ti, 2702 kH/s
[2015-01-04 18:09:36] GPU #0: GeForce GTX 750 Ti, 2700 kH/s
[2015-01-04 18:10:06] GPU #1: GeForce GTX 750 Ti, 2704 kH/s
[2015-01-04 18:10:09] accepted: 12/13 (92.31%), 16265 khash/s yay!!!
[2015-01-04 18:10:30] GPU #3: GeForce GTX 750 Ti, 2749 kH/s
[2015-01-04 18:10:36] GPU #2: GeForce GTX 750 Ti, 2705 kH/s
[2015-01-04 18:10:36] GPU #4: GeForce GTX 750 Ti, 2704 kH/s
[2015-01-04 18:10:36] GPU #5: GeForce GTX 750 Ti, 2702 kH/s
[2015-01-04 18:10:36] GPU #0: GeForce GTX 750 Ti, 2699 kH/s
[2015-01-04 18:10:59] GPU #5: GeForce GTX 750 Ti, 2702 kH/s
[2015-01-04 18:11:03] accepted: 13/14 (92.86%), 16265 khash/s yay!!!
[2015-01-04 18:11:06] GPU #1: GeForce GTX 750 Ti, 2704 kH/s
[2015-01-04 18:11:30] GPU #3: GeForce GTX 750 Ti, 2749 kH/s
[2015-01-04 18:11:36] GPU #2: GeForce GTX 750 Ti, 2705 kH/s
[2015-01-04 18:11:37] GPU #4: GeForce GTX 750 Ti, 2704 kH/s
[2015-01-04 18:11:37] GPU #0: GeForce GTX 750 Ti, 2699 kH/s
[2015-01-04 18:11:57] 192.168.0.205:3333/ x11 block 13441
[2015-01-04 18:11:57] GPU #4: GeForce GTX 750 Ti, 2705 kH/s
[2015-01-04 18:11:57] GPU #1: GeForce GTX 750 Ti, 2704 kH/s
[2015-01-04 18:11:57] GPU #0: GeForce GTX 750 Ti, 2699 kH/s
[2015-01-04 18:11:58] GPU #3: GeForce GTX 750 Ti, 2749 kH/s
[2015-01-04 18:11:58] GPU #2: GeForce GTX 750 Ti, 2705 kH/s
[2015-01-04 18:11:58] GPU #5: GeForce GTX 750 Ti, 2702 kH/s
24 hours of mining will be yours via westhash soon sp ... im just in the process of rebuilding a few of the machines which will take the rest of the week ...
after that - what ever they mine will be on your address for the 24 hour period ... that should buy a cuppla beers ...
#crysx
|
|
|
|
drr0ss
Member
Offline
Activity: 98
Merit: 10
|
|
January 04, 2015, 12:13:18 PM |
|
- Fixed some of the random crashes.(ctrl-c exit and network disconnects) - Blake rewrite to uint2. Faster x11,x13,x14,x15,x17,nist5,quark etc (around 40khash on the 980(x11)) - fixed dropping hashrate on some pools - less gputhreads,more speed (1 watt less powerusage 750ti) My 6card rig on the attic is using 207 watt total. (750ti). This is including cpu and harddrive.(mining quark) 32MHASH base clocks. (Temperature in the room is around 4 degrees celsius. ) The 24th public beta(windows executable) is available here: (03-jan-2015) http://www.filedropper.com/release24The sourcecode is available here: https://github.com/sp-hash/ccminerPost your stats here. Card name/gpu clock/memclock MinGw32 $ ./autogen.sh configure.ac:4: installing `./config.sub' configure.ac:6: installing `./missing' compat/jansson/Makefile.am: installing `./depcomp' Makefile.am:6: JANSSON_INCLUDES was already defined in condition TRUE, which includes condition WANT_JANSSON ... Makefile.am:4: ... `JANSSON_INCLUDES' previously defined here configure.ac:103: error: possibly undefined macro: AC_MSG_ERROR If this token and others are legitimate, please use m4_pattern_allow. See the Autoconf documentation. |
|
|
|
|
chrysophylax
Legendary
Offline
Activity: 2870
Merit: 1091
--- ChainWorks Industries ---
|
|
January 04, 2015, 10:32:37 PM |
|
- Fixed some of the random crashes.(ctrl-c exit and network disconnects) - Blake rewrite to uint2. Faster x11,x13,x14,x15,x17,nist5,quark etc (around 40khash on the 980(x11)) - fixed dropping hashrate on some pools - less gputhreads,more speed (1 watt less powerusage 750ti) My 6card rig on the attic is using 207 watt total. (750ti). This is including cpu and harddrive.(mining quark) 32MHASH base clocks. (Temperature in the room is around 4 degrees celsius. ) The 24th public beta(windows executable) is available here: (03-jan-2015) http://www.filedropper.com/release24The sourcecode is available here: https://github.com/sp-hash/ccminerPost your stats here. Card name/gpu clock/memclock MinGw32 $ ./autogen.sh configure.ac:4: installing `./config.sub' configure.ac:6: installing `./missing' compat/jansson/Makefile.am: installing `./depcomp' Makefile.am:6: JANSSON_INCLUDES was already defined in condition TRUE, which includes condition WANT_JANSSON ... Makefile.am:4: ... `JANSSON_INCLUDES' previously defined here configure.ac:103: error: possibly undefined macro: AC_MSG_ERROR If this token and others are legitimate, please use m4_pattern_allow. See the Autoconf documentation. try using the ./build.sh script ... just edit and insert the PATH variable to the beginning of the script - as per the instructions in the script ... i dont seem to have an issue with it compiling under fedora 19 x64 when i use that script ... you can also try - make clean - BEFORE using any of the scripts to clean out the residual files and directories if there are any ... #crysx |
|
|
|
scryptr
Legendary
Offline
Activity: 1797
Merit: 1028
|
|
January 05, 2015, 12:04:15 AM |
|
- Fixed some of the random crashes.(ctrl-c exit and network disconnects) - Blake rewrite to uint2. Faster x11,x13,x14,x15,x17,nist5,quark etc (around 40khash on the 980(x11)) - fixed dropping hashrate on some pools - less gputhreads,more speed (1 watt less powerusage 750ti) My 6card rig on the attic is using 207 watt total. (750ti). This is including cpu and harddrive.(mining quark) 32MHASH base clocks. (Temperature in the room is around 4 degrees celsius. ) The 24th public beta(windows executable) is available here: (03-jan-2015) http://www.filedropper.com/release24The sourcecode is available here: https://github.com/sp-hash/ccminerPost your stats here. Card name/gpu clock/memclock MinGw32 $ ./autogen.sh configure.ac:4: installing `./config.sub' configure.ac:6: installing `./missing' compat/jansson/Makefile.am: installing `./depcomp' Makefile.am:6: JANSSON_INCLUDES was already defined in condition TRUE, which includes condition WANT_JANSSON ... Makefile.am:4: ... `JANSSON_INCLUDES' previously defined here configure.ac:103: error: possibly undefined macro: AC_MSG_ERROR If this token and others are legitimate, please use m4_pattern_allow. See the Autoconf documentation. try using the ./build.sh script ... just edit and insert the PATH variable to the beginning of the script - as per the instructions in the script ... i dont seem to have an issue with it compiling under fedora 19 x64 when i use that script ... you can also try - make clean - BEFORE using any of the scripts to clean out the residual files and directories if there are any ... #crysx BUILD.SH SCRYPT -- Use it! It works like a charm. Unless you have an unusual setup, after cloning the file with "git", I just type "sh build.sh" and press enter in the cloned directory. It works like a charm. Nothing else is needed, the executable "ccminer" is there after it runs. --scryptr |
|
|
|
chrysophylax
Legendary
Offline
Activity: 2870
Merit: 1091
--- ChainWorks Industries ---
|
|
January 05, 2015, 12:32:50 AM
Last edit: January 05, 2015, 11:18:16 AM by chrysophylax |
|
- Fixed some of the random crashes.(ctrl-c exit and network disconnects) - Blake rewrite to uint2. Faster x11,x13,x14,x15,x17,nist5,quark etc (around 40khash on the 980(x11)) - fixed dropping hashrate on some pools - less gputhreads,more speed (1 watt less powerusage 750ti) My 6card rig on the attic is using 207 watt total. (750ti). This is including cpu and harddrive.(mining quark) 32MHASH base clocks. (Temperature in the room is around 4 degrees celsius. ) The 24th public beta(windows executable) is available here: (03-jan-2015) http://www.filedropper.com/release24The sourcecode is available here: https://github.com/sp-hash/ccminerPost your stats here. Card name/gpu clock/memclock MinGw32 $ ./autogen.sh configure.ac:4: installing `./config.sub' configure.ac:6: installing `./missing' compat/jansson/Makefile.am: installing `./depcomp' Makefile.am:6: JANSSON_INCLUDES was already defined in condition TRUE, which includes condition WANT_JANSSON ... Makefile.am:4: ... `JANSSON_INCLUDES' previously defined here configure.ac:103: error: possibly undefined macro: AC_MSG_ERROR If this token and others are legitimate, please use m4_pattern_allow. See the Autoconf documentation. try using the ./build.sh script ... just edit and insert the PATH variable to the beginning of the script - as per the instructions in the script ... i dont seem to have an issue with it compiling under fedora 19 x64 when i use that script ... you can also try - make clean - BEFORE using any of the scripts to clean out the residual files and directories if there are any ... #crysx BUILD.SH SCRYPT -- Use it! It works like a charm. Unless you have an unusual setup, after cloning the file with "git", I just type "sh build.sh" and press enter in the cloned directory. It works like a charm. Nothing else is needed, the executable "ccminer" is there after it runs. --scryptr scryptr - i actually meant SCRIPT ... its a shell script after all but yes - totally agree ... sh build.sh ... OR if its not an executable - then chmod +x build.sh - then ./build.sh ... guess which is easier  hehehe ... ok you win scryptr ... sh build.sh is easier ... though right off the bat it wont work with the cuda libraries unless you insert the PATH ... at least that what had to be doen with mine ... so these lines were inserted ... export PATH=/usr/local/cuda-6.0/bin:$PATH export LD_LIBRARY_PATH=/usr/local/cuda-6.0/lib64:$LD_LIBRARY_PATH THEN i could compile without an issue ... #crysx |
|
|
|
squadbox
Newbie
Offline
Activity: 16
Merit: 0
|
|
January 05, 2015, 02:04:13 AM |
|
SP,
I saw in git that you made a commit (9d20be0) updating version numbers in cpuminer-config.h, but I noticed that it wasn't reflected in ccminer once I built it myself (Ubuntu 14.04). I did some searching and saw that the version number should be updated in configure.ac on line 1 and in cpu-miner.c on line 1536.
All this lead me to another question. Does including cpuminer-config.h in the repo have any purpose? Running ./configure.sh overwrites it anyway.
|
|
|
|
|
squadbox
Newbie
Offline
Activity: 16
Merit: 0
|
|
January 05, 2015, 05:44:05 AM |
|
- Fixed some of the random crashes.(ctrl-c exit and network disconnects) - Blake rewrite to uint2. Faster x11,x13,x14,x15,x17,nist5,quark etc (around 40khash on the 980(x11)) - fixed dropping hashrate on some pools - less gputhreads,more speed (1 watt less powerusage 750ti) My 6card rig on the attic is using 207 watt total. (750ti). This is including cpu and harddrive.(mining quark) 32MHASH base clocks. (Temperature in the room is around 4 degrees celsius. ) The 24th public beta(windows executable) is available here: (03-jan-2015) http://www.filedropper.com/release24The sourcecode is available here: https://github.com/sp-hash/ccminerPost your stats here. Card name/gpu clock/memclock I've had very poor performance with r24 built from git on linux. Lots of low difficulty shares and nonce issues concerning already being sent. [2015-01-05 00:20:18] GPU #1: GeForce GTX 750 Ti, 5568 kH/s
[2015-01-05 00:20:18] nonce 6537ae00 was already sent 2 seconds ago
[2015-01-05 00:20:18] GPU #0: GeForce GTX 750 Ti, 5462 kH/s
[2015-01-05 00:20:18] stratum connection reset
[2015-01-05 00:20:18] GPU #1: GeForce GTX 750 Ti, 5508 kH/s
[2015-01-05 00:20:18] GPU #0: GeForce GTX 750 Ti, 5686 kH/s
[2015-01-05 00:20:19] Stratum difficulty set to 0.01
[2015-01-05 00:20:19] us-east01.miningrigrentals.com:3333 quark block 701747
[2015-01-05 00:20:20] GPU #0: GeForce GTX 750 Ti, 5595 kH/s
[2015-01-05 00:20:20] accepted: 917/985 (93.10%), 11173 khash/s booooo
[2015-01-05 00:20:20] reject reason: Low difficulty share
[2015-01-05 00:20:22] us-east01.miningrigrentals.com:3333 quark block 633570
[2015-01-05 00:20:22] GPU #1: GeForce GTX 750 Ti, 5516 kH/s
[2015-01-05 00:20:22] GPU #0: GeForce GTX 750 Ti, 5601 kH/s
[2015-01-05 00:20:24] GPU #0: GeForce GTX 750 Ti, 5686 kH/s
[2015-01-05 00:20:24] accepted: 918/986 (93.10%), 11171 khash/s yay!!!
[2015-01-05 00:20:26] GPU #1: GeForce GTX 750 Ti, 5542 kH/s
[2015-01-05 00:20:26] accepted: 919/987 (93.11%), 11172 khash/s yay!!!
[2015-01-05 00:20:26] GPU #0: GeForce GTX 750 Ti, 5651 kH/s
[2015-01-05 00:20:26] nonce 47dd5f01 was already sent 2 seconds ago
[2015-01-05 00:20:26] GPU #1: GeForce GTX 750 Ti, 5535 kH/s
[2015-01-05 00:20:28] GPU #0: GeForce GTX 750 Ti, 5644 kH/s
[2015-01-05 00:20:28] nonce 47dd5f01 was already sent 4 seconds ago
[2015-01-05 00:20:28] GPU #1: GeForce GTX 750 Ti, 5546 kH/s
[2015-01-05 00:20:28] nonce 47dd5f01 was already sent 4 seconds ago
[2015-01-05 00:20:30] stratum connection reset
[2015-01-05 00:20:30] GPU #0: GeForce GTX 750 Ti, 5552 kH/s
[2015-01-05 00:20:30] GPU #1: GeForce GTX 750 Ti, 5582 kH/s
[2015-01-05 00:20:30] Stratum difficulty set to 0.01
[2015-01-05 00:20:30] us-east01.miningrigrentals.com:3333 quark block 701747
[2015-01-05 00:20:32] GPU #1: GeForce GTX 750 Ti, 5526 kH/s
[2015-01-05 00:20:32] accepted: 919/988 (93.02%), 11175 khash/s booooo
[2015-01-05 00:20:32] reject reason: Low difficulty share
[2015-01-05 00:20:33] GPU #0: GeForce GTX 750 Ti, 5660 kH/s
[2015-01-05 00:20:33] accepted: 920/989 (93.02%), 11178 khash/s yay!!!
[2015-01-05 00:20:35] GPU #0: GeForce GTX 750 Ti, 5643 kH/s
[2015-01-05 00:20:35] nonce 7747bf01 was already sent 2 seconds ago
[2015-01-05 00:20:35] GPU #1: GeForce GTX 750 Ti, 5532 kH/s
[2015-01-05 00:20:36] GPU #0: GeForce GTX 750 Ti, 5693 kH/s
[2015-01-05 00:20:36] accepted: 921/990 (93.03%), 11180 khash/s yay!!!
[2015-01-05 00:20:36] stratum connection reset
as opposed to r23 which has no issues. [2015-01-05 00:24:52] us-east01.miningrigrentals.com:3333 quark block 633582
[2015-01-05 00:24:52] GPU #1: GeForce GTX 750 Ti, 5518 kH/s
[2015-01-05 00:24:52] GPU #0: GeForce GTX 750 Ti, 5629 kH/s
[2015-01-05 00:24:55] GPU #0: GeForce GTX 750 Ti, 5643 kH/s
[2015-01-05 00:24:55] accepted: 13/13 (100.00%), 11177 khash/s yay!!!
[2015-01-05 00:24:59] GPU #1: GeForce GTX 750 Ti, 5527 kH/s
[2015-01-05 00:24:59] accepted: 14/14 (100.00%), 11175 khash/s yay!!!
[2015-01-05 00:25:03] GPU #0: GeForce GTX 750 Ti, 5614 kH/s
[2015-01-05 00:25:03] accepted: 15/15 (100.00%), 11173 khash/s yay!!!
[2015-01-05 00:25:05] GPU #1: GeForce GTX 750 Ti, 5525 kH/s
[2015-01-05 00:25:05] accepted: 16/16 (100.00%), 11172 khash/s yay!!!
[2015-01-05 00:25:12] us-east01.miningrigrentals.com:3333 quark block 633582
[2015-01-05 00:25:12] GPU #0: GeForce GTX 750 Ti, 5613 kH/s
[2015-01-05 00:25:12] GPU #1: GeForce GTX 750 Ti, 5526 kH/s
[2015-01-05 00:25:21] GPU #1: GeForce GTX 750 Ti, 5521 kH/s
[2015-01-05 00:25:21] accepted: 17/17 (100.00%), 11167 khash/s yay!!!
[2015-01-05 00:25:22] GPU #1: GeForce GTX 750 Ti, 5540 kH/s
[2015-01-05 00:25:22] accepted: 18/18 (100.00%), 11167 khash/s yay!!!
[2015-01-05 00:25:30] GPU #1: GeForce GTX 750 Ti, 5517 kH/s
[2015-01-05 00:25:30] accepted: 19/19 (100.00%), 11166 khash/s yay!!!
[2015-01-05 00:25:42] GPU #0: GeForce GTX 750 Ti, 5614 kH/s
[2015-01-05 00:25:44] GPU #0: GeForce GTX 750 Ti, 5626 kH/s
[2015-01-05 00:25:44] accepted: 20/20 (100.00%), 11165 khash/s yay!!!
[2015-01-05 00:25:49] us-east01.miningrigrentals.com:3333 quark block 633583
[2015-01-05 00:25:49] GPU #0: GeForce GTX 750 Ti, 5634 kH/s
[2015-01-05 00:25:49] GPU #1: GeForce GTX 750 Ti, 5515 kH/s
[2015-01-05 00:25:51] GPU #1: GeForce GTX 750 Ti, 5541 kH/s
[2015-01-05 00:25:51] accepted: 21/21 (100.00%), 11164 khash/s yay!!!
[2015-01-05 00:25:51] GPU #1: GeForce GTX 750 Ti, 5555 kH/s
[2015-01-05 00:25:52] accepted: 22/22 (100.00%), 11165 khash/s yay!!!
[2015-01-05 00:25:53] us-east01.miningrigrentals.com:3333 quark block 830338
[2015-01-05 00:25:53] GPU #1: GeForce GTX 750 Ti, 5505 kH/s
[2015-01-05 00:25:53] GPU #0: GeForce GTX 750 Ti, 5611 kH/s
[2015-01-05 00:26:01] GPU #0: GeForce GTX 750 Ti, 5606 kH/s
[2015-01-05 00:26:01] accepted: 23/23 (100.00%), 11161 khash/s yay!!!
[2015-01-05 00:26:04] GPU #0: GeForce GTX 750 Ti, 5653 kH/s
[2015-01-05 00:26:04] accepted: 24/24 (100.00%), 11163 khash/s yay!!!
[2015-01-05 00:26:04] us-east01.miningrigrentals.com:3333 quark block 365008
[2015-01-05 00:26:04] GPU #1: GeForce GTX 750 Ti, 5521 kH/s
[2015-01-05 00:26:05] GPU #1: GeForce GTX 750 Ti, 5541 kH/s
[2015-01-05 00:26:05] accepted: 25/25 (100.00%), 11162 khash/s yay!!!
I was only getting about 8 Mh/s effective hashrate at the pool with r24 as opposed to 10.5 Mh/s with r23. I'll be sticking with r23 for now. |
|
|
|
|
chrysophylax
Legendary
Offline
Activity: 2870
Merit: 1091
--- ChainWorks Industries ---
|
|
January 05, 2015, 06:29:41 AM |
|
- Fixed some of the random crashes.(ctrl-c exit and network disconnects) - Blake rewrite to uint2. Faster x11,x13,x14,x15,x17,nist5,quark etc (around 40khash on the 980(x11)) - fixed dropping hashrate on some pools - less gputhreads,more speed (1 watt less powerusage 750ti) My 6card rig on the attic is using 207 watt total. (750ti). This is including cpu and harddrive.(mining quark) 32MHASH base clocks. (Temperature in the room is around 4 degrees celsius. ) The 24th public beta(windows executable) is available here: (03-jan-2015) http://www.filedropper.com/release24The sourcecode is available here: https://github.com/sp-hash/ccminerPost your stats here. Card name/gpu clock/memclock I've had very poor performance with r24 built from git on linux. Lots of low difficulty shares and nonce issues concerning already being sent. [2015-01-05 00:20:18] GPU #1: GeForce GTX 750 Ti, 5568 kH/s
[2015-01-05 00:20:18] nonce 6537ae00 was already sent 2 seconds ago
[2015-01-05 00:20:18] GPU #0: GeForce GTX 750 Ti, 5462 kH/s
[2015-01-05 00:20:18] stratum connection reset
[2015-01-05 00:20:18] GPU #1: GeForce GTX 750 Ti, 5508 kH/s
[2015-01-05 00:20:18] GPU #0: GeForce GTX 750 Ti, 5686 kH/s
[2015-01-05 00:20:19] Stratum difficulty set to 0.01
[2015-01-05 00:20:19] us-east01.miningrigrentals.com:3333 quark block 701747
[2015-01-05 00:20:20] GPU #0: GeForce GTX 750 Ti, 5595 kH/s
[2015-01-05 00:20:20] accepted: 917/985 (93.10%), 11173 khash/s booooo
[2015-01-05 00:20:20] reject reason: Low difficulty share
[2015-01-05 00:20:22] us-east01.miningrigrentals.com:3333 quark block 633570
[2015-01-05 00:20:22] GPU #1: GeForce GTX 750 Ti, 5516 kH/s
[2015-01-05 00:20:22] GPU #0: GeForce GTX 750 Ti, 5601 kH/s
[2015-01-05 00:20:24] GPU #0: GeForce GTX 750 Ti, 5686 kH/s
[2015-01-05 00:20:24] accepted: 918/986 (93.10%), 11171 khash/s yay!!!
[2015-01-05 00:20:26] GPU #1: GeForce GTX 750 Ti, 5542 kH/s
[2015-01-05 00:20:26] accepted: 919/987 (93.11%), 11172 khash/s yay!!!
[2015-01-05 00:20:26] GPU #0: GeForce GTX 750 Ti, 5651 kH/s
[2015-01-05 00:20:26] nonce 47dd5f01 was already sent 2 seconds ago
[2015-01-05 00:20:26] GPU #1: GeForce GTX 750 Ti, 5535 kH/s
[2015-01-05 00:20:28] GPU #0: GeForce GTX 750 Ti, 5644 kH/s
[2015-01-05 00:20:28] nonce 47dd5f01 was already sent 4 seconds ago
[2015-01-05 00:20:28] GPU #1: GeForce GTX 750 Ti, 5546 kH/s
[2015-01-05 00:20:28] nonce 47dd5f01 was already sent 4 seconds ago
[2015-01-05 00:20:30] stratum connection reset
[2015-01-05 00:20:30] GPU #0: GeForce GTX 750 Ti, 5552 kH/s
[2015-01-05 00:20:30] GPU #1: GeForce GTX 750 Ti, 5582 kH/s
[2015-01-05 00:20:30] Stratum difficulty set to 0.01
[2015-01-05 00:20:30] us-east01.miningrigrentals.com:3333 quark block 701747
[2015-01-05 00:20:32] GPU #1: GeForce GTX 750 Ti, 5526 kH/s
[2015-01-05 00:20:32] accepted: 919/988 (93.02%), 11175 khash/s booooo
[2015-01-05 00:20:32] reject reason: Low difficulty share
[2015-01-05 00:20:33] GPU #0: GeForce GTX 750 Ti, 5660 kH/s
[2015-01-05 00:20:33] accepted: 920/989 (93.02%), 11178 khash/s yay!!!
[2015-01-05 00:20:35] GPU #0: GeForce GTX 750 Ti, 5643 kH/s
[2015-01-05 00:20:35] nonce 7747bf01 was already sent 2 seconds ago
[2015-01-05 00:20:35] GPU #1: GeForce GTX 750 Ti, 5532 kH/s
[2015-01-05 00:20:36] GPU #0: GeForce GTX 750 Ti, 5693 kH/s
[2015-01-05 00:20:36] accepted: 921/990 (93.03%), 11180 khash/s yay!!!
[2015-01-05 00:20:36] stratum connection reset
as opposed to r23 which has no issues. [2015-01-05 00:24:52] us-east01.miningrigrentals.com:3333 quark block 633582
[2015-01-05 00:24:52] GPU #1: GeForce GTX 750 Ti, 5518 kH/s
[2015-01-05 00:24:52] GPU #0: GeForce GTX 750 Ti, 5629 kH/s
[2015-01-05 00:24:55] GPU #0: GeForce GTX 750 Ti, 5643 kH/s
[2015-01-05 00:24:55] accepted: 13/13 (100.00%), 11177 khash/s yay!!!
[2015-01-05 00:24:59] GPU #1: GeForce GTX 750 Ti, 5527 kH/s
[2015-01-05 00:24:59] accepted: 14/14 (100.00%), 11175 khash/s yay!!!
[2015-01-05 00:25:03] GPU #0: GeForce GTX 750 Ti, 5614 kH/s
[2015-01-05 00:25:03] accepted: 15/15 (100.00%), 11173 khash/s yay!!!
[2015-01-05 00:25:05] GPU #1: GeForce GTX 750 Ti, 5525 kH/s
[2015-01-05 00:25:05] accepted: 16/16 (100.00%), 11172 khash/s yay!!!
[2015-01-05 00:25:12] us-east01.miningrigrentals.com:3333 quark block 633582
[2015-01-05 00:25:12] GPU #0: GeForce GTX 750 Ti, 5613 kH/s
[2015-01-05 00:25:12] GPU #1: GeForce GTX 750 Ti, 5526 kH/s
[2015-01-05 00:25:21] GPU #1: GeForce GTX 750 Ti, 5521 kH/s
[2015-01-05 00:25:21] accepted: 17/17 (100.00%), 11167 khash/s yay!!!
[2015-01-05 00:25:22] GPU #1: GeForce GTX 750 Ti, 5540 kH/s
[2015-01-05 00:25:22] accepted: 18/18 (100.00%), 11167 khash/s yay!!!
[2015-01-05 00:25:30] GPU #1: GeForce GTX 750 Ti, 5517 kH/s
[2015-01-05 00:25:30] accepted: 19/19 (100.00%), 11166 khash/s yay!!!
[2015-01-05 00:25:42] GPU #0: GeForce GTX 750 Ti, 5614 kH/s
[2015-01-05 00:25:44] GPU #0: GeForce GTX 750 Ti, 5626 kH/s
[2015-01-05 00:25:44] accepted: 20/20 (100.00%), 11165 khash/s yay!!!
[2015-01-05 00:25:49] us-east01.miningrigrentals.com:3333 quark block 633583
[2015-01-05 00:25:49] GPU #0: GeForce GTX 750 Ti, 5634 kH/s
[2015-01-05 00:25:49] GPU #1: GeForce GTX 750 Ti, 5515 kH/s
[2015-01-05 00:25:51] GPU #1: GeForce GTX 750 Ti, 5541 kH/s
[2015-01-05 00:25:51] accepted: 21/21 (100.00%), 11164 khash/s yay!!!
[2015-01-05 00:25:51] GPU #1: GeForce GTX 750 Ti, 5555 kH/s
[2015-01-05 00:25:52] accepted: 22/22 (100.00%), 11165 khash/s yay!!!
[2015-01-05 00:25:53] us-east01.miningrigrentals.com:3333 quark block 830338
[2015-01-05 00:25:53] GPU #1: GeForce GTX 750 Ti, 5505 kH/s
[2015-01-05 00:25:53] GPU #0: GeForce GTX 750 Ti, 5611 kH/s
[2015-01-05 00:26:01] GPU #0: GeForce GTX 750 Ti, 5606 kH/s
[2015-01-05 00:26:01] accepted: 23/23 (100.00%), 11161 khash/s yay!!!
[2015-01-05 00:26:04] GPU #0: GeForce GTX 750 Ti, 5653 kH/s
[2015-01-05 00:26:04] accepted: 24/24 (100.00%), 11163 khash/s yay!!!
[2015-01-05 00:26:04] us-east01.miningrigrentals.com:3333 quark block 365008
[2015-01-05 00:26:04] GPU #1: GeForce GTX 750 Ti, 5521 kH/s
[2015-01-05 00:26:05] GPU #1: GeForce GTX 750 Ti, 5541 kH/s
[2015-01-05 00:26:05] accepted: 25/25 (100.00%), 11162 khash/s yay!!!
I was only getting about 8 Mh/s effective hashrate at the pool with r24 as opposed to 10.5 Mh/s with r23. I'll be sticking with r23 for now. those hashrates are superb ... but as sp works on the miner and optimizations - there is bound to be some mishaps along the way ... im still runing the latest git pull - and will stay on it for now - to test stability also ... i too have issues with extranonce2 errors though ... westhash is the main one ... yaamp is down at the moment - but was not getting too many errors there ... have you overclocked the cards to get those hashrates? ... if so - how? ... assuming you are using linux too as per your post ... tanx ... #crysx |
|
|
|
sp_ (OP)
Legendary
Offline
Activity: 2940
Merit: 1087
Team Black developer
|
|
January 05, 2015, 09:32:05 AM |
|
I've had very poor performance with r24 built from git on linux. Lots of low difficulty shares and nonce issues concerning already being sent.
[2015-01-05 00:20:18] nonce 6537ae00 was already sent 2 seconds ago
[2015-01-05 00:20:26] nonce 47dd5f01 was already sent 2 seconds ago
I was only getting about 8 Mh/s effective hashrate at the pool with r24 as opposed to 10.5 Mh/s with r23. I'll be sticking with r23 for now.
Some days ago I added 2 nonce sending in quark, but it had some bugs (double sending) and I reverted the changeset. Make sure that you build from the github version that is tagged with the "release 24" changeset. Commits before the tagged release could have sideeffects. And commits after are not tested properly and could have errors. Yesterday I fixed a bug when running benchmarkmode (Run the benchmark for a while and it starts to print 100 times as much text to the commandline). Seems to work, but untested on the pool. |
|
|
|
Handofmidas
Member
Offline
Activity: 61
Merit: 10
|
|
January 05, 2015, 10:05:52 AM |
|
Hi there, just tested release24 and it started off well and pool reported good hashrate, but after a short while it dropped down again. Hash should be around 16.7 MH. Pool is still drk.coinmine.pl, just the lazout changed. Will test another pool for comparison soon.  |
|
|
|
|
tbearhere
Legendary
Offline
Activity: 3178
Merit: 1003
|
|
January 05, 2015, 11:16:47 AM |
|
Yes its a nice speed but honestly Its not even worth running anymore. Nothing is profitable anymore.
too bad this miner comes soo late, it should have come in jackpot era at the very least Still possible to make a profit if you know how to use the software... Not without ridiculously cheap electricity as far as I can tell. Donate some beers, and I will tell you how to double your profit. 750ti just broke 6mh/s QUARK ALGO with #24 and my oc is still the same. I forgot, #24 about 2 watts less per card. |
|
|
|
|
chrysophylax
Legendary
Offline
Activity: 2870
Merit: 1091
--- ChainWorks Industries ---
|
|
January 05, 2015, 11:24:27 AM |
|
I've had very poor performance with r24 built from git on linux. Lots of low difficulty shares and nonce issues concerning already being sent.
[2015-01-05 00:20:18] nonce 6537ae00 was already sent 2 seconds ago
[2015-01-05 00:20:26] nonce 47dd5f01 was already sent 2 seconds ago
I was only getting about 8 Mh/s effective hashrate at the pool with r24 as opposed to 10.5 Mh/s with r23. I'll be sticking with r23 for now.
Some days ago I added 2 nonce sending in quark, but it had some bugs (double sending) and I reverted the changeset. Make sure that you build from the github version that is tagged with the "release 24" changeset. Commits before the tagged release could have sideeffects. And commits after are not tested properly and could have errors. Yesterday I fixed a bug when running benchmarkmode (Run the benchmark for a while and it starts to print 100 times as much text to the commandline). Seems to work, but untested on the pool. sp - i was mining on yaamp earlier and the site went down ... it is still down as far as i can see as the proxy wont reconnect to it ... one thing i noticed was that ccminer retries for only 3 or 4 attempts then exits ... can this be changed? ... i ask this due to teh many times a pool may disconnect for a few minutes at a time then reconnect ... if the miner is still trying ( which happens with much of the very earlyr versions ) then it would continue to mine ... but as it stands - if yaamp were to come back on only 3 minutes after it disconnects - then ccminer has already exited and wont reconnect ... a setting? or an inherent thing programmed into ccminer? can i change it? ... tanx mate ... #crysx |
|
|
|
|
