BFGMiner 5.5.0: CPU/GPU/FPGA/ASIC mining software, GBT+Stratum, RPC, Linux/Win64

[aarons6]

Hello, I know that all guys here are professionals about mining so I need small advise.
I'm using BFGminer software and I have Gridseed 5,2MHs conected on the computer. Can anyone help me too setup this Gridseed on this software to mine ETH? If this is possible ?
My commands on the BFGminer are now  like this:
bfgminer -S noauto -S gridseed:all --set gridseed:clock=838 --scrypt -o stratum+tcp://scrypt.eu.nicehash.com:3333 -u 1JkQzrN3wPwiYV7vT2uWzNgBQsG1me91Ez -p x

This commands are mining Scrypt on Nicehash, but I wonth to mine ETH on anny pool if is possible. Thank you for help

ethereum is not scrypt.. it can only be mined by gpu.

[1714044261]

1714044261

[1714044261]

1714044261

[1714044261]

1714044261

[ulano111]

so you tell me that with gridseed is not possible to mine ETH?

[Mystogan]

Do I need to install Nvidia Cuda software for this?
I'm getting low hash rates

[leowonderful]

Do I need to install Nvidia Cuda software for this?
I'm getting low hash rates

Old cudaminer is a good bet, i'm not sure that's even current anymore. The last time I checked was in 2013 when my laptop was happily mining away at bitcoin. Old quadro gpu died but I still think cudaminer is supported, or at least covers all gpus from 9800GTX to 980 and Titan X. Not sure about Z and 980Ti, cudaminer may not be supported anymore.

[Luke-Jr]

NEW VERSION 5.4.2, MARCH 26 2016

Happy Easter!

Human readable changelog:

• Fix some possible edge case problems with stratum proxying (--stratum-port).
• openwrt: Binary packages for 15.05 "Chaos Calmer".
• Fix 2D work support for GBT servers (requires libblkmaker 0.5.3 or newer).

Full changelog:

• Update official Win32/64 build compiler and libraries:
  • Win64 compiler (GCC) from 4.7.4 to 5.3.0 (Win32 remains at 4.7.4)
  • libcurl from 7.39.0 to 7.47.1
  • libevent from 2.0.21 to 2.1.5-r4
  • libusb from 1.0.18 (Win32) and 1.0.19 (Win64) to 1.0.20
  • libmicrohttpd from 0.9.38_pre33603 to 0.9.48
• Update libblkmaker to 0.5.3
• Bugfix: Sanitise lock situation for work2d
• Bugfix: SSM: Never issue the same work2d twice in a row
• Bugfix: SSM: Never send mining.notify for stale work2d
• SSM: Refactor work2d check and job pruning from _stratumsrv_update_notify into stratumsrv_update_notify_str
• Updates for OpenWrt 15.05
• Bugfix: Correct work2d handling for GBT servers

[aarons6]

trying to compile new version with futurebit.c added in the makefile.am and configure.ac i get this

bfgminer-miner.o: In function `submit_upstream_work_request':
miner.c:(.text+0x25b0): undefined reference to `blkmk_submitm_jansson'
collect2: error: ld returned 1 exit status
make[2]: *** [bfgminer] Error 1
make[2]: Leaving directory `/home/aaron/Downloads/bfgminer'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `/home/aaron/Downloads/bfgminer'
make: *** [all] Error 2


i tired to redownload the git and just ./autogen.sh ./configure and make with no modifications and the same error..

[Luke-Jr]

trying to compile new version with futurebit.c added in the makefile.am and configure.ac i get this

bfgminer-miner.o: In function `submit_upstream_work_request':
miner.c:(.text+0x25b0): undefined reference to `blkmk_submitm_jansson'
collect2: error: ld returned 1 exit status
make[2]: *** [bfgminer] Error 1
make[2]: Leaving directory `/home/aaron/Downloads/bfgminer'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `/home/aaron/Downloads/bfgminer'
make: *** [all] Error 2


i tired to redownload the git and just ./autogen.sh ./configure and make with no modifications and the same error..

Sounds like mixed libblkmaker headers/library somehow.
Can you post your config.log file?

What is futurebit.c?

[toptek]

https://asicpuppy.com/magentoPuppy/index.php/futurebit-usb-300kh-s.html   < futurebit.c is for , I'm not aarons6 , just couldn't resists posting it.

https://archive.litecointalk.org/index.php?topic=28691.0

[aarons6]

trying to compile new version with futurebit.c added in the makefile.am and configure.ac i get this

bfgminer-miner.o: In function `submit_upstream_work_request':
miner.c:(.text+0x25b0): undefined reference to `blkmk_submitm_jansson'
collect2: error: ld returned 1 exit status
make[2]: *** [bfgminer] Error 1
make[2]: Leaving directory `/home/aaron/Downloads/bfgminer'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `/home/aaron/Downloads/bfgminer'
make: *** [all] Error 2


i tired to redownload the git and just ./autogen.sh ./configure and make with no modifications and the same error..

Sounds like mixed libblkmaker headers/library somehow.
Can you post your config.log file?

What is futurebit.c?

http://www.mediafire.com/download/hmz9yb6axwh2m99/config.log

i tried it straight from git with no mods and its the same error.

[toptek]

Code:

Package: bfgminer
Version: 5.4.2-1
Depends: libc, libcurl, libpthread, jansson, libevent2, libncurses, libmicrohttpd, libusb-1.0
Source: /home/luke-jr/Projects/Education/Tonal/BitCoin/bfgminer/openwrt/bfgminer
License: GPL-3.0+
LicenseFiles: COPYING
Section: utils
Maintainer: "Luke Dashjr" <luke_openwrt@dashjr.org>
Architecture: brcm2708
Installed-Size: 300537
Filename: bfgminer_5.4.2-1_brcm2708.ipk
Size: 300307
MD5Sum: 42a52222609b6c087885296a45be3af9
SHA256sum: 2031f5a1928e237ac4cc2d9e9ef378660b095ec1c4657f3569e362992d4bc6b1
Description:  Modular Bitcoin ASIC/FPGA/GPU/CPU miner in C

I update it over openwrt and get this

Code:

Collected errors:
 * satisfy_dependencies_for: Cannot satisfy the following dependencies for bfgminer:
 *      jansson *       libmicrohttpd *
 * opkg_install_cmd: Cannot install package bfgminer.
 

 I know what to do , before i used to be able to get it all off the BFG site it's np .
 
 just wondering if your a ware of it. or it's intended that way now .

[Luke-Jr]

Code:

Package: bfgminer
Version: 5.4.2-1
Depends: libc, libcurl, libpthread, jansson, libevent2, libncurses, libmicrohttpd, libusb-1.0
Source: /home/luke-jr/Projects/Education/Tonal/BitCoin/bfgminer/openwrt/bfgminer
License: GPL-3.0+
LicenseFiles: COPYING
Section: utils
Maintainer: "Luke Dashjr" <luke_openwrt@dashjr.org>
Architecture: brcm2708
Installed-Size: 300537
Filename: bfgminer_5.4.2-1_brcm2708.ipk
Size: 300307
MD5Sum: 42a52222609b6c087885296a45be3af9
SHA256sum: 2031f5a1928e237ac4cc2d9e9ef378660b095ec1c4657f3569e362992d4bc6b1
Description:  Modular Bitcoin ASIC/FPGA/GPU/CPU miner in C

I update it over openwrt and get this

Code:

Collected errors:
 * satisfy_dependencies_for: Cannot satisfy the following dependencies for bfgminer:
 *      jansson *       libmicrohttpd *
 * opkg_install_cmd: Cannot install package bfgminer.
 

 I know what to do , before i used to be able to get it all off the BFG site it's np .
 
 just wondering if your a ware of it. or it's intended that way now .

No, jansson and libmicrohttpd have never been included in the BFGMiner repositories...

Which OpenWrt version are you using, and does the BFGMiner repo match it?
Note I just added 15.05, but if you still have 12.09, you should use the 12.09 repo instead.

[toptek]

Code:

Package: bfgminer
Version: 5.4.2-1
Depends: libc, libcurl, libpthread, jansson, libevent2, libncurses, libmicrohttpd, libusb-1.0
Source: /home/luke-jr/Projects/Education/Tonal/BitCoin/bfgminer/openwrt/bfgminer
License: GPL-3.0+
LicenseFiles: COPYING
Section: utils
Maintainer: "Luke Dashjr" <luke_openwrt@dashjr.org>
Architecture: brcm2708
Installed-Size: 300537
Filename: bfgminer_5.4.2-1_brcm2708.ipk
Size: 300307
MD5Sum: 42a52222609b6c087885296a45be3af9
SHA256sum: 2031f5a1928e237ac4cc2d9e9ef378660b095ec1c4657f3569e362992d4bc6b1
Description:  Modular Bitcoin ASIC/FPGA/GPU/CPU miner in C

I update it over openwrt and get this

Code:

Collected errors:
 * satisfy_dependencies_for: Cannot satisfy the following dependencies for bfgminer:
 *      jansson *       libmicrohttpd *
 * opkg_install_cmd: Cannot install package bfgminer.
 

 I know what to do , before i used to be able to get it all off the BFG site it's np .
 
 just wondering if your a ware of it. or it's intended that way now .

No, jansson and libmicrohttpd have never been included in the BFGMiner repositories...

Which OpenWrt version are you using, and does the BFGMiner repo match it?
Note I just added 15.05, but if you still have 12.09, you should use the 12.09 repo instead.

I got it i knew what to do, i had to add custom feeds to the version i used  or what ever they call them, it was on a PI2 i had it running, i went back to ubuntu 15 server on my PI3,wanted to test open wrt, it was running BFG 5.4.2  on a pi2 with openwrt under https://downloads.openwrt.org/latest/brcm2708/bcm2709/ .

[wareck]

for aarons6 :

I try to build "bfgminer futurebit driver" as you try and I had same errors ... (raspberry pi with wheezy)

I just type that commands and compilation goes weel just after:

Code:

sudo apt-get update
sudo apt-get install libcurl4-gnutls-dev libjansson-dev
make

[aarons6]

for aarons6 :

I try to build "bfgminer futurebit driver" as you try and I had same errors ... (raspberry pi with wheezy)

I just type that commands and compilation goes weel just after:

Code:

sudo apt-get update
sudo apt-get install libcurl4-gnutls-dev libjansson-dev
make

libjansson-dev is already installed and i have   libcurl4-openssl-dev instead of libcurl4-gnutls-dev?

tried it anyway, same error

Code:

  CCLD     bfgminer
bfgminer-miner.o: In function `submit_upstream_work_request':
miner.c:(.text+0x25b0): undefined reference to `blkmk_submitm_jansson'
collect2: error: ld returned 1 exit status
make[2]: *** [bfgminer] Error 1
make[2]: Leaving directory `/home/aaron/Downloads/bfgminer'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `/home/aaron/Downloads/bfgminer'
make: *** [all] Error 2

[Luke-Jr]

for aarons6 :

I try to build "bfgminer futurebit driver" as you try and I had same errors ... (raspberry pi with wheezy)

I just type that commands and compilation goes weel just after:

Code:

sudo apt-get update
sudo apt-get install libcurl4-gnutls-dev libjansson-dev
make

libjansson-dev is already installed and i have   libcurl4-openssl-dev instead of libcurl4-gnutls-dev?

tried it anyway, same error

Code:

  CCLD     bfgminer
bfgminer-miner.o: In function `submit_upstream_work_request':
miner.c:(.text+0x25b0): undefined reference to `blkmk_submitm_jansson'
collect2: error: ld returned 1 exit status
make[2]: *** [bfgminer] Error 1
make[2]: Leaving directory `/home/aaron/Downloads/bfgminer'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `/home/aaron/Downloads/bfgminer'
make: *** [all] Error 2

I cannot reproduce this problem.
Can you get in touch and provide me with remote access maybe?

[aarons6]

for aarons6 :

I try to build "bfgminer futurebit driver" as you try and I had same errors ... (raspberry pi with wheezy)

I just type that commands and compilation goes weel just after:

Code:

sudo apt-get update
sudo apt-get install libcurl4-gnutls-dev libjansson-dev
make

libjansson-dev is already installed and i have   libcurl4-openssl-dev instead of libcurl4-gnutls-dev?

tried it anyway, same error

Code:

  CCLD     bfgminer
bfgminer-miner.o: In function `submit_upstream_work_request':
miner.c:(.text+0x25b0): undefined reference to `blkmk_submitm_jansson'
collect2: error: ld returned 1 exit status
make[2]: *** [bfgminer] Error 1
make[2]: Leaving directory `/home/aaron/Downloads/bfgminer'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `/home/aaron/Downloads/bfgminer'
make: *** [all] Error 2

I cannot reproduce this problem.
Can you get in touch and provide me with remote access maybe?

its a pretty basic lunux mint with ubuntu 14.04.
i installed all the packages in the readme and i only made 2 changes. i added

Code:

 
BFG_DRIVER(,FutureBit,scrypt,no,[
	need_lowl_vcom=yes
	has_asic=yes
])

to configure.ac

and

Code:

if USE_FUTUREBIT
bfgminer_SOURCES += driver-futurebit.c
endif

to Makefile.am

i run
./autogen.sh
./configure CFLAGS=-O3 --enable-scrypt --enable-futurebit --disable-other-drivers
make


you can remote in if you want.. not 100% sure how to set it up tho.. i have openssh installed.

i was going to try to start from scratch and see if i missed something.

[Luke-Jr]

for aarons6 :

I try to build "bfgminer futurebit driver" as you try and I had same errors ... (raspberry pi with wheezy)

I just type that commands and compilation goes weel just after:

Code:

sudo apt-get update
sudo apt-get install libcurl4-gnutls-dev libjansson-dev
make

libjansson-dev is already installed and i have   libcurl4-openssl-dev instead of libcurl4-gnutls-dev?

tried it anyway, same error

Code:

  CCLD     bfgminer
bfgminer-miner.o: In function `submit_upstream_work_request':
miner.c:(.text+0x25b0): undefined reference to `blkmk_submitm_jansson'
collect2: error: ld returned 1 exit status
make[2]: *** [bfgminer] Error 1
make[2]: Leaving directory `/home/aaron/Downloads/bfgminer'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `/home/aaron/Downloads/bfgminer'
make: *** [all] Error 2

I don't know how to fix this properly.
As a workaround, try adding --without-system-libbase58 to your configure options.

Details: GCC is finding your libbase58 in /usr/local/lib, and adding -L/usr/local/lib to the linker options. However, this causes the libblkmaker in /usr/local/lib to be used as well, which doesn't work because it's the older version. This is less likely to occur if I swap the order of the two libraries, but it doesn't really fix it. I could also specify the full path to the library, but there seems to be no portable way to get the filename right.

[aarons6]

for aarons6 :

I try to build "bfgminer futurebit driver" as you try and I had same errors ... (raspberry pi with wheezy)

I just type that commands and compilation goes weel just after:

Code:

sudo apt-get update
sudo apt-get install libcurl4-gnutls-dev libjansson-dev
make

libjansson-dev is already installed and i have   libcurl4-openssl-dev instead of libcurl4-gnutls-dev?

tried it anyway, same error

Code:

  CCLD     bfgminer
bfgminer-miner.o: In function `submit_upstream_work_request':
miner.c:(.text+0x25b0): undefined reference to `blkmk_submitm_jansson'
collect2: error: ld returned 1 exit status
make[2]: *** [bfgminer] Error 1
make[2]: Leaving directory `/home/aaron/Downloads/bfgminer'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `/home/aaron/Downloads/bfgminer'
make: *** [all] Error 2

I don't know how to fix this properly.
As a workaround, try adding --without-system-libbase58 to your configure options.

Details: GCC is finding your libbase58 in /usr/local/lib, and adding -L/usr/local/lib to the linker options. However, this causes the libblkmaker in /usr/local/lib to be used as well, which doesn't work because it's the older version. This is less likely to occur if I swap the order of the two libraries, but it doesn't really fix it. I could also specify the full path to the library, but there seems to be no portable way to get the filename right.

what if i just deleted it?

is it because ubuntu 14.04 has an old package that you need upgraded?

[Luke-Jr]

If it's in /usr/local, it didn't come from Ubuntu. Probably was installed with BFGMiner before.

[aarons6]

If it's in /usr/local, it didn't come from Ubuntu. Probably was installed with BFGMiner before.

i did compile the last bfgminer for the futurebit moonlander sticks so it could be. ill try tomorrow to just remove those files and start over.