BFGMiner 5.5.0: CPU/GPU/FPGA/ASIC mining software, GBT+Stratum, RPC, Linux/Win64

[LPape]

I am trying to add my antminer 3+ device and I am using this line it isn't working can anyone please help.

-S bitmain:auto --set btm:model=S3 --set btm:layout=32:8 --set btm:timeout=3
--set btm:clock=350 --set btm:reg_data=0d82 --set btm:voltage=x0725

[1713512707]

1713512707

[1713512707]

1713512707

[1713512707]

1713512707

[toptek]

I am trying to add my antminer 3+ device and I am using this line it isn't working can anyone please help.

-S bitmain:auto --set btm:model=S3 --set btm:layout=32:8 --set btm:timeout=3
--set btm:clock=350 --set btm:reg_data=0d82 --set btm:voltage=x0725

  

Code:

--set btm:clock=350

 should be

Code:

--set btm:clock=225

 

Code:

--set btm:timeout=3

is some thing else i forget what  

Code:

18 

i think. layout not to sure about the rest looks about right.

I get bfg to work with no S3 hashing gave up a long time ago ..if you get it to work gratz ..

[Luke-Jr]

I need more details on antminer problems to try to help.

[LPape]

I am trying to add my antminer 3+ device and I am using this line it isn't working can anyone please help.

-S bitmain:auto --set btm:model=S3 --set btm:layout=32:8 --set btm:timeout=3
--set btm:clock=350 --set btm:reg_data=0d82 --set btm:voltage=x0725

  

Code:

--set btm:clock=350

 should be

Code:

--set btm:clock=225

 

Code:

--set btm:timeout=3

is some thing else i forget what  

Code:

16 or 32 

i think. layout not to sure about the rest looks about right.

I get bfg to work with no S3 hashing gave up a long time ago ..if you get it to work gratz ..

I will try that out I think you mean it should look like this

-S bitmain:auto --set btm:model=S3 --set btm:layout=32:8 --set btm:timeout=3
--set btm:clock=225 --set btm:timeout= --set btm:voltage=x0725

[toptek]

I need more details on antminer problems to try to help.

A lot of pages back I posted s few times with what i tried and did, no one seemed to care , I even asked some one in a PM that seemed cool  he was a real ass hole .  no it was not ( luke ) you i asked .


 after that i figured you either did not have time or wanted cash no dis respect  intended or real life things were stopping you .I gave up and didn't push it.

[toptek]

I am trying to add my antminer 3+ device and I am using this line it isn't working can anyone please help.

-S bitmain:auto --set btm:model=S3 --set btm:layout=32:8 --set btm:timeout=3
--set btm:clock=350 --set btm:reg_data=0d82 --set btm:voltage=x0725

  

Code:

--set btm:clock=350

 should be

Code:

--set btm:clock=225

 

Code:

--set btm:timeout=3

is some thing else i forget what  

Code:

16 or 32 

i think. layout not to sure about the rest looks about right.

I get bfg to work with no S3 hashing gave up a long time ago ..if you get it to work gratz ..

I will try that out I think you mean it should look like this

-S bitmain:auto --set btm:model=S3 --set btm:layout=32:8 --set btm:timeout=3
--set btm:clock=225 --set btm:timeout= --set btm:voltage=x0725

sure if you need it like that .

Code:

-S bitmain:auto --set btm:model=S3 --set btm:layout=32:8 --set btm:timeout=3
--set btm:clock=225 --set btm:timeout=18 --set btm:voltage=x0725

 IS

Code:

--set btm:timeout=18  

you may need also or like this.

Code:

-S bitmain:auto --set btm:model=S3 --set btm:layout=32:8 --set btm:timeout=18
--set btm:clock=225 --set btm:reg_data=0d82 --set btm:voltage=x0725

only one im not rally to sure about is

Code:

--set btm:layout=32:8

  or what it even does. and can be why  mine won't hash, can't say. I formated the answer that way to make it easy to see code from talk etc .

[LPape]

I need more details on antminer problems to try to help.

I load up bfgminer, press M than press +. I add the following code to find my device. -S bitmain:auto --set btm:model=S3 --set btm:layout=32:8 --set btm:timeout=3 --set btm:clock=225 --set btm:timeout=18 --set btm:voltage=x0725. Press enter it does not find anything

S3+ antminer on windows 7. Bfgminer 5.4.2

[aarons6]

I need more details on antminer problems to try to help.

I load up bfgminer, press M than press +. I add the following code to find my device. -S bitmain:auto --set btm:model=S3 --set btm:layout=32:8 --set btm:timeout=3 --set btm:clock=225 --set btm:timeout=18 --set btm:voltage=x0725. Press enter it does not find anything

S3+ antminer on windows 7. Bfgminer 5.4.2

how do you run s3 on windows 7?

[LPape]

you have to find it on your router and you go to a web page that just is a form of cgminer

I got a device to show but not hash

[toptek]

Those setting i got out of the pdf for that chip

 and that is my issue to it works but won't hash or see the S1/3  . and the drivers are loaded i checked with the cat command .

[toptek]

you have to find it on your router and you go to a web page that just is a form of cgminer

I got a device to show but not hash

With SSH i assume ? . use screen but the S3 does not have screen on it like the S2/4 c1 s5 i think S7 . it's a bitch to get working right on a S3 i think i had screen on it once after i figured out what openwrt PKG i needed

@aarons6


you can start it that way in all most any windows version 7 and up . but have to use a ssh window is how he did, I'm guessing .

[LPape]

If anyone can get me the answer I do have some coins.

[toptek]

If anyone can get me the answer I do have some coins.

forgot to add i even tired using

Code:

-S all

nothing .




you may want to follow this to if he does it

https://bitcointalk.org/index.php?topic=1405821.0


I bet we can add BFG with no issue

[LPape]

I am trying to build a config file maybe that will help.

      "pass" : "12345678",
      "pool-priority" : "0"
   },
   {
      "url" : "stratum+tcp://stratum.f2pool.com:25",
      "user" : "indigopsy.antminer",
      "pass" : "12345678",
      "pool-priority" : "1"
   },
   {
      "url" : "stratum+tcp://stratum.antpool.com:3333",
      "user" : "indigoant.antminer",
      "pass" : "12345678",
      "pool-priority" : "2"
   },
   {
      "url" : "stratum+tcp://stratum.antpool.com:25",
      "user" : "indigoant.antminer",
      "pass" : "12345678",
      "pool-priority" : "3"
   }
]
,
"api-mcast-port" : "4028",
"api-port" : "4028",
"expiry" : "1",
"expiry-lp" : "3600",
"failover-switch-delay" : "300",
"log" : "20",
"no-pool-disable" : true,
"no-client-reconnect" : true,
"no-show-processors" : true,
"no-show-procs" : true,
"no-unicode" : true,
"queue" : "0",
"quiet-work-updates" : true,
"quiet-work-update" : true,
"scan-time" : "1",
"skip-security-checks" : "0",
"submit-stale" : true,
"temp-hysteresis" : "3",
"shares" : 0,
"kernel-path" : "/usr/local/share/bfgminer",
"scan" : [
   "antminer:all"
],
"set-device" : [
   "antminer:voltage=x830",
   "antminer:clock=x982",
   "antminer:timing=0.0054"
]
}

[toptek]

just found two new openwrt antminer s3 bin  on openwrt download page , and of course they won't flash because bitmain locked the bin so it won't but that's not a issue just use telnet to flash it . and i know i  may  brick the controller .that said wtf why not .

https://downloads.openwrt.org/snapshots/trunk/ar71xx/generic/

openwrt-ar71xx-generic-antminer-s3-squashfs-factory

openwrt-ar71xx-generic-antminer-s3-squashfs-sysupgrade


I flashed a locked TLink router about a month ago and did it from there normal locked firmware to open wrt then messed the router up tying other stuff but the flash worked i had my A4 mining on it for a while till i got brave wanted to try some thing else.

[aarons6]

just found two new openwrt antminer s3 bin  on openwrt download page , and of course they won't flash because bitmain locked the bin so it won't but that's not a issue just use telnet to flash it . and i know i  may  brick the controller .that said wtf why not .

https://downloads.openwrt.org/snapshots/trunk/ar71xx/generic/

openwrt-ar71xx-generic-antminer-s3-squashfs-factory

openwrt-ar71xx-generic-antminer-s3-squashfs-sysupgrade


I flashed a locked TLink router about a month ago and did it from there normal locked firmware to open wrt then messed the router up tying other stuff but the flash worked i had my A4 mining on it for a while till i got brave wanted to try some thing else.

Um yeah I dunno if I'd do that.
You are probably going to have to cross compile bfgminer for openwrt with the bitmain driver enabled. There is a really good how to on the openwrt site. The git for bfgminer has a special makefile for openwrt.

You can also try to use the repo on the front page. Even tho it's not for barier breaker it might work.

[toptek]

just found two new openwrt antminer s3 bin  on openwrt download page , and of course they won't flash because bitmain locked the bin so it won't but that's not a issue just use telnet to flash it . and i know i  may  brick the controller .that said wtf why not .

https://downloads.openwrt.org/snapshots/trunk/ar71xx/generic/

openwrt-ar71xx-generic-antminer-s3-squashfs-factory

openwrt-ar71xx-generic-antminer-s3-squashfs-sysupgrade


I flashed a locked TLink router about a month ago and did it from there normal locked firmware to open wrt then messed the router up tying other stuff but the flash worked i had my A4 mining on it for a while till i got brave wanted to try some thing else.

Um yeah I dunno if I'd do that.
You are probably going to have to cross compile bfgminer for openwrt with the bitmain driver enabled. There is a really good how to on the openwrt site. The git for bfgminer has a special makefile for openwrt.

You can also try to use the repo on the front page. Even tho it's not for barier breaker it might work.

'
a while back unless he never did it it was suppose to be enabled . and why not just wondering i trust your thoughts on why you know that or i wouldn't ask ".I know it will polly brick it but i have one of the custom made s3 controller not the one that comes with the upgrade kit or ant 3 in a box .;


also found this


Bitmain Antminer S3

Support @ trunk r46236 mines @ 38 something .

Bitmain Antminer S3 Cryptocurrency Miner
Hash rate: 440 GH/s @ about 340 Watts

OEM Web Page https://www.bitmaintech.com
Hardware
Architecture    MIPS32
Vendor    Bitmain
Bootloader    U-Boot
System-On-Chip    Atheros AR9331
CPU @Freq    MIPS 24Kc @400MHz
Flash size    8 MiB
RAM    64 MiB
Wireless    Integrated Atheros 802.11b/g/n
Photos

and this bfg pack should work: bfgminer_5.4.2-1_ar71xx.ipk

no other pack will load or let me.i have yet to take the time and learn cross compiling. i know that's my whole issue im sure and I should .


and this guide https://wiki.openwrt.org/doc/howto/bitcoinmining

 i really can't find much more  

[LPape]

just found two new openwrt antminer s3 bin  on openwrt download page , and of course they won't flash because bitmain locked the bin so it won't but that's not a issue just use telnet to flash it . and i know i  may  brick the controller .that said wtf why not .

https://downloads.openwrt.org/snapshots/trunk/ar71xx/generic/

openwrt-ar71xx-generic-antminer-s3-squashfs-factory

openwrt-ar71xx-generic-antminer-s3-squashfs-sysupgrade


I flashed a locked TLink router about a month ago and did it from there normal locked firmware to open wrt then messed the router up tying other stuff but the flash worked i had my A4 mining on it for a while till i got brave wanted to try some thing else.

Um yeah I dunno if I'd do that.
You are probably going to have to cross compile bfgminer for openwrt with the bitmain driver enabled. There is a really good how to on the openwrt site. The git for bfgminer has a special makefile for openwrt.

You can also try to use the repo on the front page. Even tho it's not for barier breaker it might work.

'
a while back unless he never did it it was suppose to be enabled . and why not just wondering i trust your thoughts on why you know that or i wouldn't ask ".I know it will polly brick it but i have one of the custom made s3 controller not the one that comes with the upgrade kit or ant 3 in a box .;


also found this


Bitmain Antminer S3

Support @ trunk r46236 mines @ 38 something .

Bitmain Antminer S3 Cryptocurrency Miner
Hash rate: 440 GH/s @ about 340 Watts

OEM Web Page https://www.bitmaintech.com
Hardware
Architecture    MIPS32
Vendor    Bitmain
Bootloader    U-Boot
System-On-Chip    Atheros AR9331
CPU @Freq    MIPS 24Kc @400MHz
Flash size    8 MiB
RAM    64 MiB
Wireless    Integrated Atheros 802.11b/g/n
Photos

and this bfg pack should work: bfgminer_5.4.2-1_ar71xx.ipk

no other pack will load or let me.i have yet to take the time and learn cross compiling. i know that's my whole issue im sure and I should .


and this guide https://wiki.openwrt.org/doc/howto/bitcoinmining

 i really can't find much more  

if you know how to use teamviewer I will let you try to connect it.  http://www.teamviewer.com/en/  my skype name is Larry Pantlin black and white photo add me and I will pay 50$ in bitcoin to who ever can get this going for me.

[aarons6]

just found two new openwrt antminer s3 bin  on openwrt download page , and of course they won't flash because bitmain locked the bin so it won't but that's not a issue just use telnet to flash it . and i know i  may  brick the controller .that said wtf why not .

https://downloads.openwrt.org/snapshots/trunk/ar71xx/generic/

openwrt-ar71xx-generic-antminer-s3-squashfs-factory

openwrt-ar71xx-generic-antminer-s3-squashfs-sysupgrade


I flashed a locked TLink router about a month ago and did it from there normal locked firmware to open wrt then messed the router up tying other stuff but the flash worked i had my A4 mining on it for a while till i got brave wanted to try some thing else.

Um yeah I dunno if I'd do that.
You are probably going to have to cross compile bfgminer for openwrt with the bitmain driver enabled. There is a really good how to on the openwrt site. The git for bfgminer has a special makefile for openwrt.

You can also try to use the repo on the front page. Even tho it's not for barier breaker it might work.

'
a while back unless he never did it it was suppose to be enabled . and why not just wondering i trust your thoughts on why you know that or i wouldn't ask ".I know it will polly brick it but i have one of the custom made s3 controller not the one that comes with the upgrade kit or ant 3 in a box .;


also found this


Bitmain Antminer S3

Support @ trunk r46236 mines @ 38 something .

Bitmain Antminer S3 Cryptocurrency Miner
Hash rate: 440 GH/s @ about 340 Watts

OEM Web Page https://www.bitmaintech.com
Hardware
Architecture    MIPS32
Vendor    Bitmain
Bootloader    U-Boot
System-On-Chip    Atheros AR9331
CPU @Freq    MIPS 24Kc @400MHz
Flash size    8 MiB
RAM    64 MiB
Wireless    Integrated Atheros 802.11b/g/n
Photos

and this bfg pack should work: bfgminer_5.4.2-1_ar71xx.ipk

no other pack will load or let me.i have yet to take the time and learn cross compiling. i know that's my whole issue im sure and I should .


and this guide https://wiki.openwrt.org/doc/howto/bitcoinmining

 i really can't find much more  

if you know how to use teamviewer I will let you try to connect it.  http://www.teamviewer.com/en/  my skype name is Larry Pantlin black and white photo add me and I will pay 50$ in bitcoin to who ever can get this going for me.

Does the miner mine with cgminer?

[LPape]

I be leave so I just got it . It's an s3+  http://www.ebay.ca/itm/191830001437