Antminer S3+ Automatic SHUTDOWN (HELP ASAP)

[BTC-TMXSTAR]

do you mean the 6pin? my PSU have 2 6pin only.

Yes. The two 6 pin already used on S3+ ?
Theoretical, two 6 pin is already enough.

But the warm wires are normal?
can i put like 2 fans to cool down the wires?

It's shouldn't warm in my opinion.
Did all 6 pin warm or only one 6 pin? If the 2 6pin had same warm temperature then, the connection is fine.
Just make sure it don't move to hot 

Thank you very much!
God Bless!!!!!

[1715443833]

1715443833

[Zich]

No wonder the wire getting warm.
I just find out that corsair VS550 only had one 6 pin from PSU. You need at least 2 separate connection from PSU.

Sorry dude, i didn't check the 6 pin availability. From power aspect, VS550 can work. But you need at least 2 6pin from psu, not 2 6pin on one wire.

It's like this right? This count as one, not two 

[BTC-TMXSTAR]

No wonder the wire getting warm.
I just find out that corsair VS550 only had one 6 pin from PSU. You need at least 2 separate connection from PSU.

Sorry dude, i didn't check the 6 pin availability. From power aspect, VS550 can work. But you need at least 2 6pin from psu, not 2 6pin on one wire.

It's like this right? This count as one, not two 

Hi!

Is it not recommended?
It survive 1 night non-stop
should i turn off the miner?

Thanks for your reply!
God Bless!!!!!

[Zich]

Hi!

Is it not recommended?
It survive 1 night non-stop
should i turn off the miner?

Thanks for your reply!
God Bless!!!!!

Yes, not recommended for long run. But i guess not problem until your Corsair CX750M arrive.
Just monitor the wire temperature not to hot 

[BTC-TMXSTAR]

Hi!

Is it not recommended?
It survive 1 night non-stop
should i turn off the miner?

Thanks for your reply!
God Bless!!!!!

Yes, not recommended for long run. But i guess not problem until your Corsair CX750M arrive.
Just monitor the wire temperature not to hot  

Im cooling the wires using 4 120mm fans  
and now its like normal.

Thanks Zich for your help :3  
God Bless!!!!!

[Zich]

Hi!

Is it not recommended?
It survive 1 night non-stop
should i turn off the miner?

Thanks for your reply!
God Bless!!!!!

Yes, not recommended for long run. But i guess not problem until your Corsair CX750M arrive.
Just monitor the wire temperature not to hot  

Im cooling the wires using 4 120mm fans 

Thanks Zich for your help :3  
God Bless!!!!!

Nice, fan cooling is good idea.
Or you can find EPS to 6pin converter

[BTC-TMXSTAR]

Hi!

Is it not recommended?
It survive 1 night non-stop
should i turn off the miner?

Thanks for your reply!
God Bless!!!!!

Yes, not recommended for long run. But i guess not problem until your Corsair CX750M arrive.
Just monitor the wire temperature not to hot  

Im cooling the wires using 4 120mm fans 

Thanks Zich for your help :3  
God Bless!!!!!

Nice, fan cooling is good idea.
Or you can find EPS to 6pin converter

nope i dont need that anymore, i have a fan that powered by a 1 molex connector that can be series each other   

Thanks! 
and
God Bless!!!!!

[Zich]

nope i dont need that anymore, i have a fan that powered by a 1 molex connector that can be series each other   

Thanks! 
and
God Bless!!!!!

You are welcome dude. Just monitor the temperature.
Happy mining