EUROPECOIN [ERC] 🌟 FINANCECLOUD 🌟 CRYPTOCURRENY & FINANCE API + SMARTHUB 🌟

[rmd73]

Matthias, you and Steve should read this: https://bitcointalk.org/index.php?topic=1091402.msg15740940#msg15740940

[1713470997]

1713470997

[1713470997]

1713470997

[1713470997]

1713470997

[szenekonzept]

Matthias, you and Steve should read this: https://bitcointalk.org/index.php?topic=1091402.msg15740940#msg15740940

two things

1) absolutely legit, you have nailed the situation
2) I just withdrew my ERC it is possible. Please let me try to guide you, can you log in? Then we will get this done

lets do it per PM, to keep the thread clean

have fun
Matthias

[rmd73]

Matthias, you and Steve should read this: https://bitcointalk.org/index.php?topic=1091402.msg15740940#msg15740940

two things

1) absolutely legit, you have nailed the situation
2) I just withdrew my ERC it is possible. Please let me try to guide you, can you log in? Then we will get this done

lets do it per PM, to keep the thread clean

have fun
Matthias

PM sent.

[rmd73]

Being myself a Mineum shareholder, I started talking to them about a 'EuropeCoin Box' (RaspberryPI/Touchscreen, pre-loaded with your QT).
What you think? We could become partners later.

Recent post, extract:
Also, the development and sales of our custom mining rigs and other retail sales of a variety of incredible products
and services in the MINEUM market place will enable us to keep our corporation hedged in directions other than just mining.

That's ROKOS Flavors
https://bitcointalk.org/index.php?topic=1084908.0

[rmd73]

Oh, well... What if I will tell you that you can compile most alts on those machines under ROKOS? The most common dependencies are already installed. Give it a try. It's free
The donations are only for the fine tuning and maintenance of the respective wallets for ROKOS, but ROKOS itself is a fine tuned Debian for "restricted" (hardware-wise) ARM devices.
ERC is included in ROKOS Flavors. Matthias should ask OKtoshi to work on v3 for ROKOS now, that the ERCv3 is in full swing.

[szenekonzept]

Thanks Matt, Meta and Chris. Very impressive execution!

Thank you, Woody, very kind. Like always



Some general "whats next":

Given this project has been driven by having a plan,
but not being shy, to catch opportunities and quickly adapt (in case of community consensus),
we established the tradition, to publish regular upgrades of our roadmap and also from time to time rewrite it entirely.

While trying to write an upgrade, today, I realized: "O.K. there changed a lot"
So i am writing a new one. Also, if i am telling our history (to update new users), the document is getting
(as did the last one) fragmented and difficult to understand. Nobody new, has a chance to wrap his mind around the huge amount of stuff.





Therefore i decided to split our Roadmap in two different Papers and will also clean up our Mission statement:
Our regular reporting will then have three documents, instead of two, that will be, as always, updated in a rotating cycle

1)  The Roadmap:
A "whats at stake", providing a clean representation of
next actions and where these actions are supposed to lead to (short time goals)

2) (NEW) The Summary Report:
a historic "what has happend" how did we get here, what have we learned

3) Mission Statement:
the cause and long-term goals of Europecoin and in witch way, the Roadmap is related to these goals.

Its important, that we are getting better and better in explaining our work, to give users a glimpse,
what's our Goal and a chance to see a line in all those actions, that are going on.

Projects with a holistic approach are very quickly looking just random for new users.
I am beginning with the Roadmap, planning, to release it tomorrow, because i want to use the fresh attention,
to educate as many users as possible about us.

Have fun
Matthias


.

[Kazadar]

Looking forward to see the new road map.
I havent been following the project for that long but I am very impressed with the work you guys put into it.

[szenekonzept]

Looking forward to see the new road map.
I havent been following the project for that long but I am very impressed with the work you guys put into it.

Cooool i simply love, seeing early users back here :-)
have you been knowing, that we took over? Or is this info new for you to?
When did you stop monitoring? You will see, that nearly all first timers, are back again and active.

to make sure you know:
this is our website:
http://www.europecoin.eu.org

you will  also find  missionstatement, whitepaper and and one sheet overview of our eccosystem in
the downloads area.

enjoy, if you are having question , ask anytime
Matthias

.

[Kazadar]

Looking forward to see the new road map.
I havent been following the project for that long but I am very impressed with the work you guys put into it.

Cooool i simply love, seeing early users back here :-)
have you been knowing, that we took over? Or is this info new for you to?
When did you stop monitoring? You will see, that nearly all first timers, are back again and active.

to make sure you know:
this is our website:
http://www.europecoin.eu.org

you will  also find  missionstatement, whitepaper and and one sheet overview of our eccosystem in
the downloads area.

enjoy, if you are having question , ask anytime
Matthias

Sorry if I wasnt clear. I am quite new here.
I first noticed ERC around the time the swap was decided upon.
ERC had both active devs and a good plan which are some of the most important things I am looking for in a project.
So I picked up a handful of cheap ERC V2 which turned out to be a very good deal.

[szenekonzept]

Looking forward to see the new road map.
I havent been following the project for that long but I am very impressed with the work you guys put into it.

Cooool i simply love, seeing early users back here :-)
have you been knowing, that we took over? Or is this info new for you to?
When did you stop monitoring? You will see, that nearly all first timers, are back again and active.

to make sure you know:
this is our website:
http://www.europecoin.eu.org

you will  also find  missionstatement, whitepaper and and one sheet overview of our eccosystem in
the downloads area.

enjoy, if you are having question , ask anytime
Matthias

Sorry if I wasnt clear. I am quite new here.
I first noticed ERC around the time the swap was decided upon.
ERC had both active devs and a good plan which are some of the most important things I am looking for in a project.
So I picked up a handful of cheap ERC V2 which turned out to be a very good deal.

Ah thats great we are continuing to grow, you came in, at a perfect moment. We are a coin, that was
foundet 2014 and has been a scam. After the dev vanished, it was dead nearly half a year,
then we came and rebooted the network for takeover we are ~14 Month up and running again.

Though we did a lot, the old walled, with all those bugs, kept us running partly for nothing else, then survival.
And now we finally left that behind, watch our new whitepaper to come out (i am already one day later as i planned).
But i am putting plenty of efford into it, to make it possible to understand for anybody.

here is a small preview from the new whitepaper, its a view of our eccosystem,
~2/3 is already existing working:





have fun
Matthias




.

[CRYPTONAIRE]

@ Dev-team

Good afternoon! 

I need a bit more help with the coin-swap.

I have the correct version of the old wallet (2.0.3.0) fully synced and backed-up.

I have downloaded the new wallet and got it to sync.

However, I had to change the appdata folder name when installing/syncing the new wallet, as I cannot get the shortcut to accept the -choosedatadir extension.  Consequently, I am unable to run both wallets together.   

When I insert -choosedatadir (into ERC V.3 shortcut, 'Properties', 'Shortcut', 'Target') I get the message :

"The name specified in the Target is not valid. Make sure path and file name are correct"

They ARE correct. 

Any advice?   

[CRYPTONAIRE]

Another small point.

Whenever I run the new wallet I get a warning message. 

A small panel pops up, saying "Warning: error reading wallet.dat!  All keys read correctly, but transaction data or address book entries might be missing or incorrect".

Is this something to be concerned about? 

[metamorphin]

@ Dev-team

Good afternoon! 

I need a bit more help with the coin-swap.

I have the correct version of the old wallet (2.0.3.0) fully synced and backed-up.

I have downloaded the new wallet and got it to sync.

However, I had to change the appdata folder name when installing/syncing the new wallet, as I cannot get the shortcut to accept the -choosedatadir extension.  Consequently, I am unable to run both wallets together.   

When I insert -choosedatadir (into ERC V.3 shortcut, 'Properties', 'Shortcut', 'Target') I get the message :

"The name specified in the Target is not valid. Make sure path and file name are correct"

They ARE correct. 

Any advice?   

You have windows? and which version?

[CRYPTONAIRE]

Windows 10

[szenekonzept]

@ Dev-team

Good afternoon! 

I need a bit more help with the coin-swap.

I have the correct version of the old wallet (2.0.3.0) fully synced and backed-up.

I have downloaded the new wallet and got it to sync.

However, I had to change the appdata folder name when installing/syncing the new wallet, as I cannot get the shortcut to accept the -choosedatadir extension.  Consequently, I am unable to run both wallets together.   

When I insert -choosedatadir (into ERC V.3 shortcut, 'Properties', 'Shortcut', 'Target') I get the message :

"The name specified in the Target is not valid. Make sure path and file name are correct"

They ARE correct. 

Any advice?   

You have windows? and which version?

i am using this start command and it work for me (i am running it in wine, a windows layer on linux)

coin-qt.exe -datadir=⁄home⁄hwr⁄.europecoinv3 -discover -ll -seednode

hope that helps
Matthias


.

[Kazadar]

You could send your V2 ERC to swap, then remove or rename the files for the V2 as you wont have much use for it afterwards.

Then install V3 with the default directory.

I just renamed my ERC V2 appdata folder so if I need it I can just swap the folder names and everything is ready to go.

Of course that will only work if you dont need to run both at the same time.

[CRYPTONAIRE]

I decided to 'cheat'.  

I opened/synced new wallet, and generated a new deposit address.  I copied this down somewhere.

I then renamed the appdata folder and synced the old wallet.

I went to the swap tool, and followed the instructions given.

However, when I went to the old wallet to send the old ERCs, I discovered a new problem.

The balance in my wallet is correctly stated on the Overview page.

At the Send Coins page the balance is stated as Zero!!  I thought this might be a minor bug, so i tried sending my actual balance anyway.

It did not work, as  I got the message "The amount exceeds your balance".  This, despite me leaving off the last few ERCs to keep the sending amount below my balance.

I would really appreciate some help here.  

[CRYPTONAIRE]

You could send your V2 ERC to swap, then remove or rename the files for the V2 as you wont have much use for it afterwards.

Then install V3 with the default directory.

I just renamed my ERC V2 appdata folder so if I need it I can just swap the folder names and everything is ready to go.

Of course that will only work if you dont need to run both at the same time.

Thanks mate, I posted just after you.  We came to the same conclusion!!   

[szenekonzept]

I decided to 'cheat'.   

I opened/synced new wallet, and generated a new deposit address.  I copied this down somewhere.

I then renamed the appdata folder and synced the old wallet.

I went to the swap tool, and followed the instructions given.

However, when I went to the old wallet to send the old ERCs, I discovered a new problem.

The balance in my wallet is correctly stated on the Overview page.

At the Send Coins page the balance is stated as Zero!!  I thought this might be a minor bug, so i tried sending my actual balance anyway.

It did not work, as  I got the message "The amount exceeds your balance".  This, despite me leaving off the last few ERCs to keep the sending amount below my balance.

I would really appreciate some help here. 

i think the coins are about to mature from staking or are preparing to start staking try to start it by adding -staking=no to my conmmand
and then wait until they got matured, to return to the "spendable"  line. This can last up to three days.

have fun
Matthias

[CRYPTONAIRE]

I decided to 'cheat'.   

I opened/synced new wallet, and generated a new deposit address.  I copied this down somewhere.

I then renamed the appdata folder and synced the old wallet.

I went to the swap tool, and followed the instructions given.

However, when I went to the old wallet to send the old ERCs, I discovered a new problem.

The balance in my wallet is correctly stated on the Overview page.

At the Send Coins page the balance is stated as Zero!!  I thought this might be a minor bug, so i tried sending my actual balance anyway.

It did not work, as  I got the message "The amount exceeds your balance".  This, despite me leaving off the last few ERCs to keep the sending amount below my balance.

I would really appreciate some help here. 

i think the coins are about to mature from staking or are preparing to start staking try to start it by adding -staking=no to my conmmand
and then wait until they got matured, to return to the "spendable"  line. This can last up to three days.

have fun
Matthias

Thanks for getting back to me Matt.

I'll give that a go, and report back.

Cheers!!