raskul (OP)
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 23, 2014, 07:32:09 AM |
|
I have some serious reservations about how Bitmain have gone about creating their newest miner, the S5. After seeing the magazine adverts and watching the speculation build, it would seem, to me at least, that they are designing a miner which has a good chance of failure due to the risky design. Bitmain have done a private batch of S3++ using the chain design on an entirely new chip, in preparation to sell the S5 en-mass. S3++ hasn't been released to the public, so we can only presume that there are a few large farms, with vested interest, mining large scale, across the world on a private batch of S3++ miners. The string design is a very bad method to use, after so many experienced the troubles with the Prisma from AM... and... AM had to recall an entire batch. Sure the S5 is BMT's most efficient miner to date but it's quite late to the party, the SP20 can reach this efficiency and below with proven dc2dc stable design and... without what seems to be, by Bitmain, a risky cost cutting exercise. I can't help but think something is not quite right here... presuming that there were problems with the chips, or the boards on the S5's for them to appear this late after advertising... having an open-top design of the casing, surely won't allow enough airflow, either? I can't get my head around what Bitmain are trying to accomplish here, so I'm putting it out there... it's a product which has high chance of failure and I can foresee many RMA'd units. ![Undecided](https://bitcointalk.org/Smileys/default/undecided.gif)
|
tips 1APp826DqjJBdsAeqpEstx6Q8hD4urac8a
|
|
|
Melty Melty
Newbie
Offline
Activity: 8
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 23, 2014, 08:03:24 AM |
|
It's a nice idea in that you save a hell of a lot of copper, I just don't know if anybody is actually able to pull it off. There's a lot of hints here that the Antminer chips use the same masks as the Bitfury ones, the specs of the Bitfury 1 and Antminer's first chips are almost identical other than the choice of package. It's suggested elsewhere that Bitfury would be making a new chip, what if this is it re-badged? I'd have a lot more faith in it working if the design is a third generation Bitfury rather than a third generation Antminer.
|
|
|
|
smilingloki
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 73
Merit: 10
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 23, 2014, 08:14:18 AM |
|
I have to say it looks a lot like the S3 as Raskul says it looks like an S3++ and frankly after the performance of my 18 x s3's - I have to say.
If it walks like a duck, looks like a duck and smells like a duck..........................its probably a duck.
I wouldnt invest my money in these.
|
|
|
|
raskul (OP)
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 23, 2014, 08:18:16 AM |
|
I have to say it looks a lot like the S3 as Raskul says it looks like an S3++ and frankly after the performance of my 18 x s3's - I have to say.
If it walks like a duck, looks like a duck and smells like a duck..........................its probably a duck.
I wouldnt invest my money in these.
i never buy batch1 of any miner anyway so i'm reserving my full judgement until we can read some proper unbiased reviews. from reading your post in the S3 thread it does indeed seem like Bitmain had actually sent you refurbished units from prior batches, rather than new stock... I can only presume that the S5's which don't go up in smoke will be subject to the same. And initially, I thought the open top idea was quite a novel way of dissipating the heat from the chips, but I was a bit drunk at the time. quack-quack.
|
tips 1APp826DqjJBdsAeqpEstx6Q8hD4urac8a
|
|
|
raskul (OP)
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 23, 2014, 10:09:02 AM |
|
to be fair it's not just me with apprehension... cross-quoting these here as I've noted some of my own posts being deleted from the S5 thread: Another thing that really worries me is the chained design. Does it mean if one chip fails, the whole board fails?
So instead of getting 00XX0X00 we get -----------------?
Please tell me I'm wrong.
Hi, there will be two kinds of possible fails. Both are possible. But string design makes the PCB very simple, which left far more less possible reasons for the hardware to go wrong. That is what we have seen in the S3++, a private batch which use chained design with BM1382 chip. Thank you for your reply. But like you said, there is still a chance of failure. With the current S4 for example. Even if one chip is completely dead. I can still use it. But with the chained design if one chip goes silent, that's it. End of story. I like the power efficiency but your price tag.. and the chance of having one miner out of action just because of 1 single chip... I don't know, it's nagging me in my head...
|
tips 1APp826DqjJBdsAeqpEstx6Q8hD4urac8a
|
|
|
raskul (OP)
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 23, 2014, 10:11:52 AM |
|
this. Interesting product. A lot will depend on pricing, but at similar pricing and efficiency I think you'd have to give the nod to the SP20 due to many of the reasons other people have listed here (established product, ease of changing settings), but also due to the potential risks inherent in the chained design. Bitmain saves significantly on costs by eliminating the VRMs and should get a small efficiency boost from it as well, but so did AM and everyone saw how the Prismas turned out. This wouldn't be a product I'd be investing a lot of money into until the first batch is field tested for awhile.
|
tips 1APp826DqjJBdsAeqpEstx6Q8hD4urac8a
|
|
|
raskul (OP)
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 23, 2014, 10:12:58 AM |
|
but they are very prepared for your RMA. caveat emptorS5 will open sales VERY SOON!!!! Noise wise, we will post DB level reading like it was done in S3 and S4 in the past Happy Shopping! ![Grin](https://bitcointalk.org/Smileys/default/grin.gif) PS: Limited 90-Day Warranty The manufacturer warrants this product to be free from defects in workmanship and materials, under normal use and conditions, for a period of 90 days from the date of original purchase. Shipping and handling fees to be paid by the customer. The manufacturer agrees, at its option during the warranty period, to repair any defect in material or workmanship or to furnish a repaired or refurbished product of equal value in exchange without charge (except for a fee for shipping, handling, packing, return postage, and insurance which will be incurred by the customer). Such repair or replacement is subject to verification of the defect or malfunction and proof of purchase as confirmed by showing the model number on original dated sales receipt. IMPORTANT: DO NOT RETURN THIS UNIT TO THE RETAIL STORE FOR SERVICE. INSTEAD, CALL 1-844-248-6246 FOR ANY QUESTIONS REGARDING THIS WARRANTY OR PRODUCT This warranty does not cover: • Any product which has been subject to damage due to an act of God, misuse, neglect, accident, abuse, commercial use, or modification of, or to, any part of the product, including the antenna. • Damage due to improper operation or maintenance, connection to improper voltage supply, or attempted repair by anyone other than the Manufacturer. • Re-manufactured units, product sold AS IS or closeout product. • The cost of shipping this product to the Service Center and its return to the owner, if the product was determined to be free of defect or out of warranty period. Under no circumstances shall the Manufacturer be liable for any loss (direct, indirect, incidental, foreseen, unforeseen, special or consequential) or for any damage arising out of, or in connection with, the use of this product. This warranty is valid only in the United States and Canada and grants specific legal rights, it does not extend to owners of the product other than to the original owner. You may also have other rights which vary from state to state. Products out of warranty requiring service will be reviewed individually along with the fees associated. Warranty is subject to change; please visit our website at http://www. bitmaintech.com for the most up to date version. IMPORTANT: FOR INSTRUCTIONS ON HOW TO RETURN YOUR PRODUCT CALL 1-844-248-6248
|
tips 1APp826DqjJBdsAeqpEstx6Q8hD4urac8a
|
|
|
Tupsu
Legendary
Offline
Activity: 1218
Merit: 1003
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 23, 2014, 11:57:38 AM |
|
Today I bought 12 pieces Antminer S5 I trust them today more than SP20 , especially after seeing this picture. Because they have 4 PCI-E slot, For 600W. SP20 has 4 PCI-E slot for 1200W (Max) I have 3 x SP20 and 6pc SP20 purchased by December 17, to get my hands probably 29.12 I also have a 5pc KNC Neptune, with no burnt PCI-E slot. The rest are all Bitmaintech production. (37x S3, 6x C1, 2x S4 ) It would be seen that picture before, then I would not have ordered more SP20.
|
|
|
|
raskul (OP)
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 23, 2014, 12:11:00 PM |
|
Today I bought 12 pieces Antminer S5 I have 3 x SP20 [imghttps://i.imgur.com/3NeiVUI.jpg[/img] modules and controller is fine, will it still cover in warranty if I replace the sockets my self?
How did that happen? everything is just fine for a week, but this morning smells like shit! I know that smell ![Grin](https://bitcointalk.org/Smileys/default/grin.gif) PSUs ok? What cable gauge? What PSU model? Cables came with the PSU? PSU is ok, because both PSU and cables is not mine so im not sure the cable gauge but im sure they is not came with PSU PSU:Super Flower Leadex Platinum 1200W Our connectors are subtitle for up to 24A each and were tested in such condition at ambient of 40C. Issue might be caused due to: 1. loose connectivity between the wire and the pin. 2. dis-connectivity of some of the wires causing over current on the connected wires. 3. over powering the PSU causing heat on wires to melt the connectors - can be for example due to wrong AWG or connectors that are not suitable for high power. 4. home made cables with long wires and unsuitable connector/wires. Can you reply the following: 1. what was the power limit per each of the 4 inputs? (this is defined at the GUI) 2. did you use the ATX original cables? 3. what is the cable AWG? 4. what was the ambient temperature? We'll check the PSU model you were using. Please contact support for RMA, don't attempt to fix yourself. We kindly ask that you'll the PSU and cables for us for further testing. Guy 1.all 288w but only use 230~270w report from ASIC stats 2.no (but cable that of the picture is) 3.I cant tell, maybe 10AWG or 9AWG 4.32C report from another working SP20 i don't wanna go RMA because i think the problem is on my plugs, if you give me a new one that is really not fair to you, i just want to keep this miner cover in warranty after i replaced the socket myself. you can see the problem. the user put the wrong cables.
|
tips 1APp826DqjJBdsAeqpEstx6Q8hD4urac8a
|
|
|
|
GoRDoN-ChoU
Newbie
Offline
Activity: 39
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 23, 2014, 03:18:34 PM |
|
Today I bought 12 pieces Antminer S5 I trust them today more than SP20 , especially after seeing this picture. Because they have 4 PCI-E slot, For 600W. SP20 has 4 PCI-E slot for 1200W (Max) I have 3 x SP20 and 6pc SP20 purchased by December 17, to get my hands probably 29.12 I also have a 5pc KNC Neptune, with no burnt PCI-E slot. The rest are all Bitmaintech production. (37x S3, 6x C1, 2x S4 ) It would be seen that picture before, then I would not have ordered more SP20. THIS IS MY BAD spondoolies is so kind that give me a new one just for free!!
|
|
|
|
raskul (OP)
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 23, 2014, 03:20:09 PM |
|
...and so endeth the lesson in customer service... ![Grin](https://bitcointalk.org/Smileys/default/grin.gif)
|
tips 1APp826DqjJBdsAeqpEstx6Q8hD4urac8a
|
|
|
Guy Corem
Donator
Legendary
Offline
Activity: 1414
Merit: 1051
Spondoolies, Beam & DAGlabs
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 23, 2014, 03:22:05 PM |
|
... spondoolies is so kind that give me a new one just for free!!
But please use good cables this time...
|
|
|
|
GoRDoN-ChoU
Newbie
Offline
Activity: 39
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 23, 2014, 03:49:22 PM |
|
... spondoolies is so kind that give me a new one just for free!!
But please use good cables this time... absolutely ![Grin](https://bitcointalk.org/Smileys/default/grin.gif)
|
|
|
|
SychoPhant
Newbie
Offline
Activity: 12
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 23, 2014, 03:50:03 PM |
|
I have some serious reservations about how Bitmain have gone about creating their newest miner, the S5. After seeing the magazine adverts and watching the speculation build, it would seem, to me at least, that they are designing a miner which has a good chance of failure due to the risky design. Bitmain have done a private batch of S3++ using the chain design on an entirely new chip, in preparation to sell the S5 en-mass. S3++ hasn't been released to the public, so we can only presume that there are a few large farms, with vested interest, mining large scale, across the world on a private batch of S3++ miners. The string design is a very bad method to use, after so many experienced the troubles with the Prisma from AM... and... AM had to recall an entire batch. Sure the S5 is BMT's most efficient miner to date but it's quite late to the party, the SP20 can reach this efficiency and below with proven dc2dc stable design and... without what seems to be, by Bitmain, a risky cost cutting exercise. I can't help but think something is not quite right here... presuming that there were problems with the chips, or the boards on the S5's for them to appear this late after advertising... having an open-top design of the casing, surely won't allow enough airflow, either? I can't get my head around what Bitmain are trying to accomplish here, so I'm putting it out there... it's a product which has high chance of failure and I can foresee many RMA'd units. ![Undecided](https://bitcointalk.org/Smileys/default/undecided.gif) Seems serious old boy.... Is there any evidence of localized heating or hot spots on the boards? How about in the Bui, any sign of uneven cooling? Are you running at 12v or 9? What guage cables are you running from the PSU and is there any sign of excess heating? One wouldn't want to invest in something which has design problems. Do you have much experience in asic or electronic design yourself? I'll put my bulk order of 52 on hold till I hear back from you old chap. Have a tidy profit from those nice chaps at GAW I'm looking to re invest and these look like just the ticket. Toodle pip for now....
|
|
|
|
raskul (OP)
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 23, 2014, 04:01:48 PM |
|
[quote author=raskul link=topic=903102.msg9922620#msg9922620 date=1419319929] I have some serious reservations about how Bitmain have gone about creating their newest miner, the S5.
After seeing the magazine adverts and watching the speculation build, it would seem, to me at least, that they are designing a miner which has a good chance of failure due to the risky design.
Bitmain have done a private batch of S3++ using the chain design on an entirely new chip, in preparation to sell the S5 en-mass. S3++ hasn't been released to the public, so we can only presume that there are a few large farms, with vested interest, mining large scale, across the world on a private batch of S3++ miners.
The string design is a very bad method to use, after so many experienced the troubles with the Prisma from AM... and... AM had to recall an entire batch.
Sure the S5 is BMT's most efficient miner to date but it's quite late to the party, the SP20 can reach this efficiency [b]and below[/b] with proven dc2dc stable design and... without what seems to be, by Bitmain, a risky cost cutting exercise.
I can't help but think something is not quite right here... presuming that there were problems with the chips, or the boards on the S5's for them to appear this late after advertising... having an open-top design of the casing, surely won't allow enough airflow, either?
I can't get my head around what Bitmain are trying to accomplish here, so I'm putting it out there... it's a product which has high chance of failure and I can foresee many RMA'd units.
:-\ [/quote] Seems serious old boy.... Is there any evidence of localized heating or hot spots on the boards? How about in the Bui, any sign of uneven cooling? Are you running at 12v or 9? What guage cables are you running from the PSU and is there any sign of excess heating? I have no evidence as units are yet to ship, simply from what I see on the announcement thread, makes me irk towards something not quite right about the design. ![Undecided](https://bitcointalk.org/Smileys/default/undecided.gif) One wouldn't want to invest in something which has design problems. Do you have much experience in asic or electronic design yourself?
I never buy batch 1 miners for the specific reason that you just can't be sure and I only have experience in these fields from my home mining endeavours. It's a serious gamble to lay out vast amounts of money on something which has not gone through proper independent testing. I'd preferred to see a few independent reviews before any miner goes on sale, not just BMT. I'll put my bulk order of 52 on hold till I hear back from you old chap.
I cannot make decisions for you, you should weigh up the facts for yourself and decide accordingly. I'd just like to see any initial bumps evened out before anyone puts their money into it. Toodle pip for now....
all the best to you and yours this festive season.
|
tips 1APp826DqjJBdsAeqpEstx6Q8hD4urac8a
|
|
|
Photon939
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 23, 2014, 05:56:12 PM |
|
My main concern with the S5 is why does it cost so much?
The C1 is $325 and has FOUR hashing boards. The C1 boards also have a DC/DC converter for every two chips IIRC. The buck controller ICs probably cost more per unit than their custom silicon.
There is a major BOM cost reduction going to the chained design. The controller looks the same (cost reduced beaglebone black), the new chips of course have an NRE that needs to be recouped so they're probably just milking the first batch of people who are gonna buy it just because it's new.
Not even considering the possibility of instability or catastrophic failure due to the chain design, I'm gonna sit on my hands for a while. I'm willing to bet the first few price drops will be pretty good.
|
|
|
|
dogie
Legendary
Offline
Activity: 1666
Merit: 1185
dogiecoin.com
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 23, 2014, 06:49:36 PM |
|
My main concern with the S5 is why does it cost so much?
The C1 is $325 and has FOUR hashing boards. The C1 boards also have a DC/DC converter for every two chips IIRC. The buck controller ICs probably cost more per unit than their custom silicon.
There is a major BOM cost reduction going to the chained design. The controller looks the same (cost reduced beaglebone black), the new chips of course have an NRE that needs to be recouped so they're probably just milking the first batch of people who are gonna buy it just because it's new.
Not even considering the possibility of instability or catastrophic failure due to the chain design, I'm gonna sit on my hands for a while. I'm willing to bet the first few price drops will be pretty good.
Who said they aren't losing $100s on the C1 at that price? You don't know.
|
|
|
|
philipma1957
Legendary
Offline
Activity: 4228
Merit: 8449
'The right to privacy matters'
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 23, 2014, 09:34:26 PM |
|
here is my take on this.
we don't know if gear works well until the first adapters use it test it and post on it.
Asic Miner
1)Usb sticks pretty solid worked pretty well 2)Blades pretty solid worked pretty well 3)49 port usb hub issues with the stock fuse many melted. most of us used a lessor fuse problem solved 4) cubes many batches had issues and burned or melted fuses 5)little tubes had issues some melted some popped caps 6) prismas worse then the tubes
I owned all of the above. I only felt safe with the usb sticks and the blades
Bitmaintech
S-1 pretty safe a few but not many issues S-3 very safe a few but not many issues S-2 shipped poorly lots of psu issues S-4 better then the s-2 by far C-1 some water pump issues
Spondoolies
sp10 worked well not many burnups Sp20 I have 8 they work great at 1500gh or under If I owned the company I would have called them 1500gh miners sp30 Some psu issues underpreformed a bit. spondoolies paid comp money sp31 a few psu issues sp35 a few psu issues.
For the sake of argument I am using the 3 companies above. I would fear Asic Miners new build based on the last 4 things they sold. but I will buy one and test it. I am getting an S-5 as a test demo... I will test the shit out of it would I fear to buy it no. Would I buy 100 from the first batch no. Sp20E do I fear it no would I buy more yes.
BUT I drive my Kia Forte at 70mph max or about 115KPH max. I clock my Sp20E at 1400gh or 1430gh max I do not even attempt to think 1600 or 1700gh.
So when I get the S-5 I will test the shit out of it and report back. Until then I won't fear the design. PS I will power it with my 760 watt seasonic platinum for the first set of tests. why is that the seasonic has short and surge protection.
|
|
|
|
notlist3d
Legendary
Offline
Activity: 1456
Merit: 1000
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
December 23, 2014, 10:55:06 PM Last edit: December 23, 2014, 11:35:50 PM by notlist3d |
|
My main concern with the S5 is why does it cost so much?
The C1 is $325 and has FOUR hashing boards. The C1 boards also have a DC/DC converter for every two chips IIRC. The buck controller ICs probably cost more per unit than their custom silicon.
There is a major BOM cost reduction going to the chained design. The controller looks the same (cost reduced beaglebone black), the new chips of course have an NRE that needs to be recouped so they're probably just milking the first batch of people who are gonna buy it just because it's new.
Not even considering the possibility of instability or catastrophic failure due to the chain design, I'm gonna sit on my hands for a while. I'm willing to bet the first few price drops will be pretty good.
Who said they aren't losing $100s on the C1 at that price? You don't know. I think them doing a batch 2 proves it. But I don't have the info you do so I could be wrong. I think they would have stopped after batch one, or stopped it completely like L1's. For what it is worth I think we will see SP and Bitmain continue to battle it out.
|
|
|
|
|