Shadow_Runner
|
|
February 25, 2015, 01:32:41 PM |
|
yes the power usage is different, but the card always runs that hot, it's the fan speed that changes. and when power consumption is very low, it means the algo is not well optimised ;-)
Well I'm not good in programming, but anyway Scrypt hashrate is 10 times slower than X11 on my GPU for example, but it runs hot. scrypt is one of the best optimized algos out there. that's why it runs hot. it hashes slower than x11 because tha algo is inherently slower. a single hash takes more instructions and, more importantly, memory accesses. when groestlcoin came out, its power consumption was very low. the kernel was so slow it is now 3x faster and power consumption has gone up to the same level as other algos, like keccak for example. Hm... need to check updates for ccminer.
|
|
|
|
ozgr
Legendary
Offline
Activity: 1596
Merit: 1013
|
|
February 25, 2015, 08:57:23 PM |
|
vps mining guide ?
|
|
|
|
dygus
Legendary
Offline
Activity: 1193
Merit: 1000
Peaky Blinder
|
|
February 25, 2015, 10:25:34 PM |
|
Also there's something we all need coming soon Don't want to tell everything in advance just to prevent failing. When you will tell us?
|
|
|
|
Lyrabar (OP)
Member
Offline
Activity: 118
Merit: 10
The precious bar
|
|
February 26, 2015, 05:47:41 PM |
|
yes the power usage is different, but the card always runs that hot, it's the fan speed that changes. and when power consumption is very low, it means the algo is not well optimised ;-)
Well I'm not good in programming, but anyway Scrypt hashrate is 10 times slower than X11 on my GPU for example, but it runs hot. scrypt is one of the best optimized algos out there. that's why it runs hot. it hashes slower than x11 because tha algo is inherently slower. a single hash takes more instructions and, more importantly, memory accesses. when groestlcoin came out, its power consumption was very low. the kernel was so slow it is now 3x faster and power consumption has gone up to the same level as other algos, like keccak for example. Hm... need to check updates for ccminer. Hopefully KBomba's Compute 2.1 version of the ccminer gets Lyra2RE support. I'm ready to tip some reasonable amount of LYB out of my pocket for someone doing that.
|
Visit ##lyrabar @ Freenode IRC !
|
|
|
Lyrabar (OP)
Member
Offline
Activity: 118
Merit: 10
The precious bar
|
|
February 26, 2015, 06:24:12 PM |
|
Also there's something we all need coming soon Don't want to tell everything in advance just to prevent failing. When you will tell us? Ofcourse I tell about upcoming features soon as possible I know I'm capable to provide, but surprises are for the extra stuff.
|
Visit ##lyrabar @ Freenode IRC !
|
|
|
SimkoMiner
|
|
February 26, 2015, 06:43:53 PM |
|
Can someone tell me what is the appx hashrate on R280x?
|
|
|
|
kondiomir
Legendary
Offline
Activity: 1568
Merit: 1000
Twitter @Acimirov
|
|
February 26, 2015, 06:56:05 PM |
|
Try this:
setx GPU_MAX_HEAP_SIZE 100 setx GPU_USE_SYNC_OBJECTS 1 setx GPU_MAX_ALLOC_PERCENT 100
sgminer.exe --kernel Lyra2RE -o stratum+tcp://lyrabar.suprnova.cc:9912 -u user -p p -I 18 -w 64 -g 2 --lookup-gap 2 --thread-concurrency 8192 --no-submit-stale --gpu-engine 950 --gpu-memclock 1200
Should gain this:
GPU 0: 56.0C 1065RPM | 1.025M/982.2Kh/s | R: 0.0% HW:0 WU:0.889/m I:18
|
|
|
|
primera
|
|
February 27, 2015, 08:42:36 AM Last edit: February 27, 2015, 08:54:11 AM by primera |
|
vps mining guide ? Here is a simple guide Run CPUMiner-Multi on ubuntu-13.10-server sudo apt-get update sudo apt-get dist-upgrade sudo apt-get -y install build-essential python-dev autotools-dev libicu-dev build-essential libbz2-dev git make automake screen libcurl4-openssl-dev libjansson-dev git clone https://github.com/tpruvot/cpuminer-multicd cpuminer-multi sudo ./build.sh ./cpuminer -a lyra2 -u LPGHVNdW9N6VnAwUs4VTXQEorQeA1Pc6gp -p x -o stratum+tcp://lyrabarpool.duckdns.org:4040 How to use screen so you can leave it running in the background, even if you close down terminal. You can add in the screen command like this: screen -S SCREENNAME ./cpuminer -a lyra2 -u LPGHVNdW9N6VnAwUs4VTXQEorQeA1Pc6gp -p x -o stratum+tcp://lyrabarpool.duckdns.org:4040 Change SCREENNAME to whatever you'd like. To disconnect, just hit CTRL+a, then d. You can then safely close down the terminal and it won't kill the process. To reconnect, simply open a new terminal, and type in: screen -r SCREENNAME XPY: LPGHVNdW9N6VnAwUs4VTXQEorQeA1Pc6gp
|
|
|
|
SimkoMiner
|
|
February 27, 2015, 05:28:59 PM |
|
Thanks for cheap coins below 4K SAT. But still, more dumps are more then welcome.
|
|
|
|
SecretsOfCrypto
|
|
February 27, 2015, 05:37:22 PM |
|
Okay new mining algorithm, but what are the benefits?
|
|
|
|
jerowacik
Legendary
Offline
Activity: 1162
Merit: 1000
|
|
February 27, 2015, 05:39:33 PM |
|
the price so low . no benefits for now .
|
|
|
|
SimkoMiner
|
|
February 27, 2015, 05:47:07 PM |
|
the price so low . no benefits for now .
Benefits are to buy low when it's low.
|
|
|
|
ilostmyface
|
|
February 27, 2015, 08:18:17 PM |
|
Super Low Price. One can easily enter with a high percentage of the market share. This coin still is pretty much a blank slate for features and innovations.
|
|
|
|
primera
|
|
February 28, 2015, 08:15:27 AM |
|
Super Low Price. One can easily enter with a high percentage of the market share. This coin still is pretty much a blank slate for features and innovations.
Yea its low 5% of all coin for just 100$
|
|
|
|
Lyrabar (OP)
Member
Offline
Activity: 118
Merit: 10
The precious bar
|
|
February 28, 2015, 04:39:50 PM |
|
vps mining guide ? Here is a simple guide Run CPUMiner-Multi on ubuntu-13.10-server sudo apt-get update sudo apt-get dist-upgrade sudo apt-get -y install build-essential python-dev autotools-dev libicu-dev build-essential libbz2-dev git make automake screen libcurl4-openssl-dev libjansson-dev git clone https://github.com/tpruvot/cpuminer-multicd cpuminer-multi sudo ./build.sh ./cpuminer -a lyra2 -u LPGHVNdW9N6VnAwUs4VTXQEorQeA1Pc6gp -p x -o stratum+tcp://lyrabarpool.duckdns.org:4040 How to use screen so you can leave it running in the background, even if you close down terminal. You can add in the screen command like this: screen -S SCREENNAME ./cpuminer -a lyra2 -u LPGHVNdW9N6VnAwUs4VTXQEorQeA1Pc6gp -p x -o stratum+tcp://lyrabarpool.duckdns.org:4040 Change SCREENNAME to whatever you'd like. To disconnect, just hit CTRL+a, then d. You can then safely close down the terminal and it won't kill the process. To reconnect, simply open a new terminal, and type in: screen -r SCREENNAME XPY: LPGHVNdW9N6VnAwUs4VTXQEorQeA1Pc6gp This guide helps everyone getting involved better with Linux mining on a CPU. Thank you for providing this great guide for all the followers!
|
Visit ##lyrabar @ Freenode IRC !
|
|
|
Lyrabar (OP)
Member
Offline
Activity: 118
Merit: 10
The precious bar
|
|
February 28, 2015, 05:43:11 PM |
|
Really had to try tpruvot's cpu miner linux build out, this is my old NAS equipped with 1 gigahertz Pentium 3, running latest Debian 7 i386.
|
Visit ##lyrabar @ Freenode IRC !
|
|
|
najzenmajsen
|
|
February 28, 2015, 05:44:26 PM |
|
Super Low Price. One can easily enter with a high percentage of the market share. This coin still is pretty much a blank slate for features and innovations.
Yea its low 5% of all coin for just 100$ why didnt you just say 100% of all coins for 2000 Bucks ? which is very low indeed , and there's no reason for this coin to go any higher.
|
|
|
|
SimkoMiner
|
|
March 01, 2015, 12:11:30 PM |
|
Only 1 bitcoin is needed to reach price 30K SAT. I don't need to explain where this coin is heading very soon.
|
|
|
|
TheCoinFinder
Legendary
Offline
Activity: 938
Merit: 1001
|
|
March 02, 2015, 08:57:44 AM |
|
Only 1 bitcoin is needed to reach price 30K SAT. I don't need to explain where this coin is heading very soon.
Trashheap?
|
|
|
|
tiggytomb
Legendary
Offline
Activity: 1848
Merit: 1000
|
|
March 02, 2015, 05:54:42 PM |
|
Let's see where we go
|
|
|
|
|