|
|
Zich
Legendary
Offline
Activity: 1190
Merit: 1000
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 29, 2015, 04:50:16 AM |
|
Agree with philipma1957, S3 use 340 watt. Corsair vs450 can deliver up to 408 watt but with 83 % load, i feel sorry for the psu. If you could spend more, corsair vs550 is good choice. It's can deliver up to 500 watt. With S3, that's 68 % load.
|
|
|
|
sidehack
Legendary
Offline
Activity: 3374
Merit: 1859
Curmudgeonly hardware guy
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 29, 2015, 05:01:10 AM |
|
I sell 750W server PSUs with the adapter board and all cabling for $50 plus shipping. They're good for two S3 each without any trouble. I've also got 2KW setups but it requires external fans. GigaMPZ (forum user pmorici) sells adapters and cabling for 800/1000W and 1200W server PSUs, not sure on current pricing.
Server PSUs with adapters are handy because the PSU is built to sustain 100% loads indefinitely and can usually run 120% rated output (though not at peak efficiency), and if the PSU smokes out it takes ten seconds to pop in a replacement since you don't have to touch the adapter and cabling.
|
|
|
|
aurel57
Legendary
Offline
Activity: 1204
Merit: 1000
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 29, 2015, 09:18:15 AM Last edit: January 29, 2015, 03:51:24 PM by aurel57 |
|
I use a RM850 Corsair to power 2 S3's (768W at the wall). The thing about staying with a larger PSU is when you upgrade in the future (like a S5) this PSU will be able to handle it and stay within its efficiency range, but a smaller PSU that may run one S3 (450-650W) will not.
I also have RM1000 PSU's which gives me even more flexibility when adding miners, I have 1 S5 running off each 1000W PSU and a S3 split between the 2.( each only running one side)
|
|
|
|
Thee_Silent (OP)
Newbie
Offline
Activity: 4
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 29, 2015, 11:19:52 AM |
|
Hmmmm.... So atm, I've got 2 S3s. Could I power the both of them with 1 power supply?? A Cougar CMX 850w power supply to be exact. The reviews for the power supply look good and its got 4 PCI-e connectors. What do you reckon?? Or do I just stick with 2 Corsair VS 550s Sometime in the future I'll possibly have a Antminer C1 as well.
|
|
|
|
dogie
Legendary
Offline
Activity: 1666
Merit: 1185
dogiecoin.com
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 29, 2015, 12:14:43 PM |
|
My recommendation for a consumer PSU for 2x S3s is the CX750M. Stable as hell and at a sensible price.
|
|
|
|
adaseb
Legendary
Offline
Activity: 3850
Merit: 1728
Up to 300% + 200 FS deposit bonuses
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 29, 2015, 03:32:03 PM |
|
My recommendation for a consumer PSU for 2x S3s is the CX750M. Stable as hell and at a sensible price.
Any difference then the CX750 ? Basically the exact same PSU expect not Modular
|
|
|
|
mitak64
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 29, 2015, 05:22:04 PM Last edit: April 07, 2015, 10:22:51 PM by mitak64 |
|
The one on Ebay has no cables, so it needs a lot of work. Check this one out, it can power 2 S3s. http://www.ebay.ca/itm/231523994303
|
|
|
|
sloopy
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 29, 2015, 06:38:41 PM |
|
If you have intentions of doing this for a while DO NOT skimp on power. You will be able to use it and sell it for a while yet.
I have Corsairs, EVGAs, DSP-2000, Seasonic, Seasonic are the same as a cheaper brand I think ti is called XF, I do not have the cheaper brand yet, but everyone states it is the same power supply made by Seasonic, who do make great units... You have a good selection, but many get priced higher which do not deserve it.
Server PSUs are better if you do not mind putting a board on the end and attaching some wires to screw terminals or doing your own work you can save a little. Get at least Gold rated if you care about long term effeciency.
|
Transaction fees go to the pools and the pools decide to pay them to the miners. Anything else, including off-chain solutions are stealing and not the way Bitcoin was intended to function. Make the block size set by the pool. Pool = miners and they get the choice.
|
|
|
Thee_Silent (OP)
Newbie
Offline
Activity: 4
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 30, 2015, 03:18:25 AM |
|
So far, I've found someone who can get me a server power supply (Dell PowerEdge 750w) With a bit of research, I found this and found out I can get this down in Australia with the 4x PCIe cables. http://www.gekkoscience.com/products/D750_supply_breakout_board.htmlI have experience with messing around with electronic so this isn't too new to me to put together, but I'm wondering if a 750w server power supply will be enough at least 2 Antminer S3s. If it is I can get this all together for around 80 bucks which would be so much better than spending ~$150 and still be skimping on the power
|
|
|
|
|
sidehack
Legendary
Offline
Activity: 3374
Merit: 1859
Curmudgeonly hardware guy
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 30, 2015, 04:48:14 AM |
|
So far, I've found someone who can get me a server power supply (Dell PowerEdge 750w) With a bit of research, I found this and found out I can get this down in Australia with the 4x PCIe cables. http://www.gekkoscience.com/products/D750_supply_breakout_board.htmlI have experience with messing around with electronic so this isn't too new to me to put together, but I'm wondering if a 750w server power supply will be enough at least 2 Antminer S3s. If it is I can get this all together for around 80 bucks which would be so much better than spending ~$150 and still be skimping on the power Yep, that's my board. If you're worried if that's enough for a pair of S3, I've got hosted S3 that have been running two to a supply for months without issue. Last year I had two overclocked S1 on a supply that ran for six months without a problem, and that was around 800W draw.
|
|
|
|
Thee_Silent (OP)
Newbie
Offline
Activity: 4
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 31, 2015, 01:04:12 AM |
|
Thanks for the info. I've gone ahead with the breakout board and Dell PowerEdge 750w.
|
|
|
|
sidehack
Legendary
Offline
Activity: 3374
Merit: 1859
Curmudgeonly hardware guy
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
January 31, 2015, 01:27:09 AM |
|
So Brad had stock and got you hooked up? Good to hear. Enjoy the mining.
|
|
|
|
|