jailBot (OP)
Newbie
Offline
Activity: 15
Merit: 0
|
|
March 11, 2015, 05:22:05 AM |
|
So as I'm preparing for blissful sleep, I suddenly hear the dreaded beeping coming from my S2. Abandoning my attempt to sleep, I go to fix whatever's wrong and find that the ASIC boards no longer appear to be visible to the controller. I cycled power and reset the firmware, but that didn't get me anywhere. I'm too tired to really look at the kernel log, but from what I can tell, the GPIO connections from the controller to the boards seem to be failing during the boot process. I'll post the a chunk of it below. Is there something wrong with the controller or the boards? Or is this a software issue? What can I do to fix this and/or what should I do to investigate further? I probably won't be back on until tomorrow after my morning classes so thanks in advance for any assistance. [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.8.13 (xxl@ubuntu) (gcc version 4.7.4 20130626 (prerelease) (Linaro GCC 4.7-2013.07) ) #1 SMP Fri Jan 17 23:04:23 CST 2014 [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=50c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine: Generic AM33XX (Flattened Device Tree), model: TI AM335x BeagleBone [ 0.000000] Memory policy: ECC disabled, Data cache writeback [ 0.000000] On node 0 totalpages: 130816 [ 0.000000] free_area_init_node: node 0, pgdat c06c9080, node_mem_map c0724000 [ 0.000000] Normal zone: 1024 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 129792 pages, LIFO batch:31 [ 0.000000] AM335X ES1.0 (neon ) [ 0.000000] PERCPU: Embedded 8 pages/cpu @c0b33000 s9408 r8192 d15168 u32768 [ 0.000000] pcpu-alloc: s9408 r8192 d15168 u32768 alloc=8*4096 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129792 [ 0.000000] Kernel command line: console=ttyO0,115200n8 quiet init=/sbin/init [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] __ex_table already sorted, skipping sort [ 0.000000] allocated 1048576 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Memory: 511MB = 511MB total [ 0.000000] Memory: 495596k/495596k available, 28692k reserved, 0K highmem [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) [ 0.000000] vmalloc : 0xe0800000 - 0xff000000 ( 488 MB) [ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf800000 - 0xbfe00000 ( 6 MB) [ 0.000000] .text : 0xc0008000 - 0xc060fc28 (6176 kB) [ 0.000000] .init : 0xc0610000 - 0xc06524c0 ( 266 kB) [ 0.000000] .data : 0xc0654000 - 0xc06c9fa0 ( 472 kB) [ 0.000000] .bss : 0xc06c9fa0 - 0xc0723d3c ( 360 kB) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=1. [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128 interrupts [ 0.000000] Total of 128 interrupts on 1 active controller [ 0.000000] OMAP clockevent source: GPTIMER1 at 24000000 Hz [ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms [ 0.000000] OMAP clocksource: GPTIMER2 at 24000000 Hz [ 0.000000] Console: colour dummy device 80x30 [ 0.000357] Calibrating delay loop... 545.07 BogoMIPS (lpj=531968) [ 0.015418] pid_max: default: 32768 minimum: 301 [ 0.015652] Security Framework initialized [ 0.015746] Mount-cache hash table entries: 512 [ 0.025068] Initializing cgroup subsys cpuacct [ 0.025103] Initializing cgroup subsys memory [ 0.025207] Initializing cgroup subsys blkio [ 0.025347] CPU: Testing write buffer coherency: ok [ 0.025864] CPU0: thread -1, cpu 0, socket -1, mpidr 0 [ 0.025943] Setting up static identity map for 0x8038a5a0 - 0x8038a5ec [ 0.027331] Brought up 1 CPUs [ 0.027356] SMP: Total of 1 processors activated (545.07 BogoMIPS). [ 0.028541] devtmpfs: initialized [ 0.093033] pinctrl core: initialized pinctrl subsystem [ 0.093250] rstctl core: initialized rstctl subsystem [ 0.093800] regulator-dummy: no parameters [ 0.094310] NET: Registered protocol family 16 [ 0.095043] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.104859] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 size 568 [ 0.105680] platform 49000000.edma: alias fck already exists [ 0.105713] platform 49000000.edma: alias fck already exists [ 0.105741] platform 49000000.edma: alias fck already exists [ 0.106882] gpiochip_add: registered GPIOs 0 to 31 on device: gpio [ 0.107055] OMAP GPIO hardware version 0.1 [ 0.108440] gpiochip_add: registered GPIOs 32 to 63 on device: gpio [ 0.109755] gpiochip_add: registered GPIOs 64 to 95 on device: gpio [ 0.111046] gpiochip_add: registered GPIOs 96 to 127 on device: gpio [ 0.111706] of_get_named_gpio_flags exited with status 52 [ 0.111735] gpio-rctrl rstctl.3: loaded OK [ 0.118205] hw-breakpoint: debug architecture 0x4 unsupported. [ 0.120394] cpsw.0: No hwaddr in dt. Using d0:ff:50:a6:79:63 from efuse [ 0.120426] cpsw.1: No hwaddr in dt. Using d0:ff:50:a6:79:65 from efuse [ 0.135901] bio: create slab <bio-0> at 0 [ 0.148044] edma-dma-engine edma-dma-engine.0: TI EDMA DMA engine driver [ 0.148323] of_get_named_gpio_flags: can't parse gpios property [ 0.148542] vmmcsd_fixed: 3300 mV [ 0.151550] SCSI subsystem initialized [ 0.151972] usbcore: registered new interface driver usbfs [ 0.152086] usbcore: registered new interface driver hub [ 0.152430] usbcore: registered new device driver usb [ 0.154517] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 0.155942] input: tps65217_pwr_but as /devices/ocp.2/44e0b000.i2c/i2c-0/0-0024/input/input0 [ 0.157704] DCDC1: at 1500 mV [ 0.158881] vdd_mpu: 925 <--> 1325 mV at 1325 mV [ 0.160035] vdd_core: 925 <--> 1150 mV at 1100 mV [ 0.161148] LDO1: at 1800 mV [ 0.162266] LDO2: at 3300 mV [ 0.164237] LDO3: 1800 mV [ 0.165342] LDO4: at 3300 mV [ 0.166382] tps65217 0-0024: TPS65217 ID 0xe version 1.2 [ 0.167073] omap_i2c 44e0b000.i2c: unable to select pin group [ 0.167851] omap_i2c 4819c000.i2c: bus 1 rev0.11 at 100 kHz [ 0.170229] omap_i2c 4819c000.i2c: unable to select pin group [ 0.170880] omap_i2c 4802a000.i2c: bus 2 rev0.11 at 100 kHz [ 0.171516] omap_i2c 4802a000.i2c: unable to select pin group [ 0.171847] media: Linux media interface: v0.10 [ 0.171952] Linux video capture interface: v2.00 [ 0.172075] pps_core: LinuxPPS API ver. 1 registered [ 0.172092] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> [ 0.172796] Advanced Linux Sound Architecture Driver Initialized. [ 0.174064] Switching to clocksource gp_timer [ 0.192331] NET: Registered protocol family 2 [ 0.193334] TCP established hash table entries: 4096 (order: 3, 32768 bytes) [ 0.193476] TCP bind hash table entries: 4096 (order: 4, 81920 bytes) [ 0.193639] TCP: Hash tables configured (established 4096 bind 4096) [ 0.193800] TCP: reno registered [ 0.193830] UDP hash table entries: 256 (order: 1, 12288 bytes) [ 0.193877] UDP-Lite hash table entries: 256 (order: 1, 12288 bytes) [ 0.194306] NET: Registered protocol family 1 [ 0.194864] RPC: Registered named UNIX socket transport module. [ 0.194884] RPC: Registered udp transport module. [ 0.194898] RPC: Registered tcp transport module. [ 0.194912] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.195278] Trying to unpack rootfs image as initramfs... [ 2.112601] Freeing initrd memory: 14704K [ 2.113315] CPU PMU: probing PMU on CPU 0 [ 2.113348] hw perfevents: enabled with ARMv7 Cortex-A8 PMU driver, 5 counters available [ 2.113963] omap2_mbox_probe: platform not supported [ 2.117860] VFS: Disk quotas dquot_6.5.2 [ 2.118099] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 2.119438] NFS: Registering the id_resolver key type [ 2.119599] Key type id_resolver registered [ 2.119620] Key type id_legacy registered [ 2.119691] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. [ 2.120154] msgmni has been set to 996 [ 2.122918] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) [ 2.122945] io scheduler noop registered [ 2.122960] io scheduler deadline registered [ 2.123001] io scheduler cfq registered (default) [ 2.124816] tps65217-bl tps65217-bl: no platform data provided [ 2.124856] tps65217-bl: probe of tps65217-bl failed with error -22 [ 2.125851] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 2.128458] omap_uart 44e09000.serial: did not get pins for uart0 error: -19 [ 2.128745] 44e09000.serial: ttyO0 at MMIO 0x44e09000 (irq = 88) is a OMAP UART0 [ 2.141055] console [ttyO0] enabled [ 2.142202] [drm] Initialized drm 1.1.0 20060810 [ 2.156162] brd: module loaded [ 2.163221] loop: module loaded [ 2.163358] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 2.163437] at24 1-0054: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 2.163506] at24 1-0055: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 2.163574] at24 1-0056: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 2.163642] at24 1-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 2.195678] bone-capemgr bone_capemgr.9: bone: scan failed (1 time) [ 2.728872] bone-capemgr bone_capemgr.9: bone: scan failed (2 time) [ 3.262079] bone-capemgr bone_capemgr.9: bone: scan failed (3 time) [ 3.795277] bone-capemgr bone_capemgr.9: bone: scan failed (4 time) [ 4.328480] bone-capemgr bone_capemgr.9: bone: scan failed (5 time) [ 4.861683] bone-capemgr bone_capemgr.9: bone: scan failed (6 time) [ 5.394890] bone-capemgr bone_capemgr.9: bone: scan failed (7 time) [ 5.928090] bone-capemgr bone_capemgr.9: bone: scan failed (8 time) [ 6.461293] bone-capemgr bone_capemgr.9: bone: scan failed (9 time) [ 6.994496] bone-capemgr bone_capemgr.9: bone: scan failed (10 time) [ 7.496464] bone-capemgr bone_capemgr.9: Failed to scan baseboard eeprom [ 7.503541] bone-capemgr: probe of bone_capemgr.9 failed with error -110 [ 7.505566] OneNAND driver initializing [ 7.508948] edma-dma-engine edma-dma-engine.0: allocated channel for 0:17 [ 7.509041] edma-dma-engine edma-dma-engine.0: allocated channel for 0:16 [ 7.512294] edma-dma-engine edma-dma-engine.0: allocated channel for 0:43 [ 7.512392] edma-dma-engine edma-dma-engine.0: allocated channel for 0:42 [ 7.514529] usbcore: registered new interface driver asix [ 7.514657] usbcore: registered new interface driver cdc_ether [ 7.514783] usbcore: registered new interface driver smsc95xx [ 7.514889] usbcore: registered new interface driver net1080 [ 7.514981] usbcore: registered new interface driver cdc_subset [ 7.515084] usbcore: registered new interface driver zaurus [ 7.515234] usbcore: registered new interface driver cdc_ncm [ 7.516158] usbcore: registered new interface driver cdc_acm [ 7.516177] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 7.516191] Initializing USB Mass Storage driver... [ 7.516319] usbcore: registered new interface driver usb-storage [ 7.516333] USB Mass Storage support registered. [ 7.516531] musb-hdrc: version 6.0, ?dma?, otg (peripheral+host) [ 7.516954] musb-hdrc musb-hdrc.0.auto: pdev->id = 0 [ 7.516983] musb-hdrc musb-hdrc.0.auto: drivers/usb/musb/musb_dsps.c:468 dsps_musb_init: OK [ 7.517021] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn) [ 7.517041] musb-hdrc: MHDRC RTL version 2.0 [ 7.517056] musb-hdrc: setup fifo_mode 4 [ 7.517085] musb-hdrc: 28/31 max ep, 16384/16384 memory [ 7.517233] musb-hdrc musb-hdrc.0.auto: *** mode=3 [ 7.517254] musb-hdrc musb-hdrc.0.auto: *** power=250 [ 7.518144] musb-hdrc musb-hdrc.1.auto: pdev->id = 1 [ 7.518172] musb-hdrc musb-hdrc.1.auto: drivers/usb/musb/musb_dsps.c:468 dsps_musb_init: OK [ 7.518211] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn) [ 7.518230] musb-hdrc: MHDRC RTL version 2.0 [ 7.518244] musb-hdrc: setup fifo_mode 4 [ 7.518267] musb-hdrc: 28/31 max ep, 16384/16384 memory [ 7.518411] musb-hdrc musb-hdrc.1.auto: *** mode=1 [ 7.518433] musb-hdrc musb-hdrc.1.auto: *** power=250 [ 7.518454] musb-hdrc musb-hdrc.1.auto: MUSB HDRC host driver [ 7.518799] musb-hdrc musb-hdrc.1.auto: new USB bus registered, assigned bus number 1 [ 7.518849] musb-hdrc musb-hdrc.1.auto: supports USB remote wakeup [ 7.518952] usb usb1: default language 0x0409 [ 7.519011] usb usb1: udev 1, busnum 1, minor = 0 [ 7.519035] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 7.519058] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 7.519078] usb usb1: Product: MUSB HDRC host driver [ 7.519098] usb usb1: Manufacturer: Linux 3.8.13 musb-hcd [ 7.519118] usb usb1: SerialNumber: musb-hdrc.1.auto [ 7.519786] usb usb1: usb_probe_device [ 7.519815] usb usb1: configuration #1 chosen from 1 choice [ 7.519996] usb usb1: adding 1-0:1.0 (config #1, interface 0) [ 7.520198] hub 1-0:1.0: usb_probe_interface [ 7.520219] hub 1-0:1.0: usb_probe_interface - got id [ 7.520247] hub 1-0:1.0: USB hub found [ 7.520296] hub 1-0:1.0: 1 port detected [ 7.520316] hub 1-0:1.0: standalone hub [ 7.520334] hub 1-0:1.0: individual port power switching [ 7.520352] hub 1-0:1.0: no over-current protection [ 7.520370] hub 1-0:1.0: Single TT [ 7.520391] hub 1-0:1.0: TT requires at most 8 FS bit times (666 ns) [ 7.520411] hub 1-0:1.0: power on to power good time: 10ms [ 7.520452] hub 1-0:1.0: local power source is good [ 7.520553] hub 1-0:1.0: enabling power on all ports [ 7.521620] mousedev: PS/2 mouse device common for all mice [ 7.524130] omap_rtc 44e3e000.rtc: rtc core: registered 44e3e000.rtc as rtc0 [ 7.524196] 44e3e000.rtc: already running [ 7.524465] i2c /dev entries driver [ 7.621558] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0000 [ 8.526042] omap_i2c 4802a000.i2c: controller timed out [ 8.531594] pca954x 2-0070: probe failed [ 8.532557] pps_ldisc: PPS line discipline registered [ 8.532714] Driver for 1-wire Dallas network protocol. [ 8.534701] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec [ 8.535072] cpuidle: using governor ladder [ 8.535092] cpuidle: using governor menu [ 8.535586] of_get_named_gpio_flags exited with status 6 [ 8.535606] of_get_named_gpio_flags: can't parse gpios property [ 8.535622] of_get_named_gpio_flags: can't parse gpios property [ 8.535658] omap_hsmmc mmc.4: of_parse_phandle_with_args of 'reset' failed [ 8.542875] omap_hsmmc mmc.4: Failed to get rstctl; not using any [ 8.543352] edma-dma-engine edma-dma-engine.0: allocated channel for 0:25 [ 8.543443] edma-dma-engine edma-dma-engine.0: allocated channel for 0:24 [ 8.543704] mmc.4 supply vmmc_aux not found, using dummy regulator [ 8.544164] omap_hsmmc mmc.4: pins are not configured from the driver [ 8.570826] of_get_named_gpio_flags: can't parse gpios property [ 8.570848] of_get_named_gpio_flags: can't parse gpios property [ 8.570863] of_get_named_gpio_flags: can't parse gpios property [ 8.570916] gpio-rctrl rstctl.3: gpio_rctrl_request eMMC_RSTn [ 8.571006] omap_hsmmc mmc.5: Got rstctl (gpio:#0 name eMMC_RSTn) label:eMMC_RSTn [ 8.571029] gpio-rctrl rstctl.3: gpio_rctrl_deassert eMMC_RSTn [ 8.571414] edma-dma-engine edma-dma-engine.0: allocated channel for 0:3 [ 8.571591] edma-dma-engine edma-dma-engine.0: allocated channel for 0:2 [ 8.572103] mmc.5 supply vmmc_aux not found, using dummy regulator [ 8.572235] omap_hsmmc mmc.5: pins are not configured from the driver [ 8.600500] pinctrl-single 44e10800.pinmux: pin 44e10854 already requested by 44e10800.pinmux; cannot claim for gpio-leds.8 [ 8.612202] pinctrl-single 44e10800.pinmux: pin-21 (gpio-leds.8) status -22 [ 8.619507] pinctrl-single 44e10800.pinmux: could not request pin 21 on device pinctrl-single [ 8.628478] leds-gpio gpio-leds.8: pins are not configured from the driver [ 8.628516] of_get_named_gpio_flags exited with status 53 [ 8.628538] of_get_named_gpio_flags exited with status 54 [ 8.628560] of_get_named_gpio_flags exited with status 55 [ 8.628581] of_get_named_gpio_flags exited with status 56 [ 8.628605] of_get_named_gpio_flags exited with status 53 [ 8.628882] of_get_named_gpio_flags exited with status 54 [ 8.629099] of_get_named_gpio_flags exited with status 55 [ 8.629334] of_get_named_gpio_flags exited with status 56 [ 8.629897] ledtrig-cpu: registered to indicate activity on CPUs [ 8.630318] edma-dma-engine edma-dma-engine.0: allocated channel for 0:36 [ 8.630401] omap-sham 53100000.sham: hw accel on OMAP rev 4.3 [ 8.632606] omap-aes 53500000.aes: OMAP AES hw accel rev: 3.2 [ 8.632742] edma-dma-engine edma-dma-engine.0: allocated channel for 0:5 [ 8.632823] edma-dma-engine edma-dma-engine.0: allocated channel for 0:6 [ 8.638460] usbcore: registered new interface driver usbhid [ 8.638481] usbhid: USB HID core driver [ 8.641502] TCP: cubic registered [ 8.641525] Initializing XFRM netlink socket [ 8.641570] NET: Registered protocol family 17 [ 8.641650] NET: Registered protocol family 15 [ 8.641804] Key type dns_resolver registered [ 8.641985] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3 [ 8.642025] ThumbEE CPU extension supported. [ 8.642063] Registering SWP/SWPB emulation handler [ 8.643152] registered taskstats version 1 [ 8.693727] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6 [ 8.693757] davinci_mdio 4a101000.mdio: detected phy mask fffffffe [ 8.701842] libphy: 4a101000.mdio: probed [ 8.701883] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver SMSC LAN8710/LAN8720 [ 8.702140] Detected MACID = d0:ff:50:a6:79:63 [ 8.702277] cpsw 4a100000.ethernet: NAPI disabled [ 8.703802] omap_rtc 44e3e000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 8.710898] ALSA device list: [ 8.710920] No soundcards found. [ 8.711633] Freeing init memory: 264K [ 8.711667] Failed to execute /init [ 8.873100] mmc0: host does not support reading read-only switch. assuming write-enable. [ 8.875531] mmc0: new high speed SDHC card at address 0003 [ 8.879400] mmcblk0: mmc0:0003 SB04G 3.67 GiB [ 8.881614] mmcblk0: p1 p2 p3 [ 8.896549] EXT3-fs (mmcblk0p3): error: couldn't mount because of unsupported optional features (240) [ 8.907554] EXT2-fs (mmcblk0p3): error: couldn't mount because of unsupported optional features (240) [ 8.954971] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null) [ 9.001682] compile Oct 29 2014--09:21:50 [ 9.006006] CM_PER_SPI1_CLKCTRL 0x2 [ 9.006025] spi_vaddr 0xfa1a0000 [ 9.006033] version 0x40300a0b [ 9.006042] OMAP2_MCSPI_SYSSTATUS 0x1 [ 9.006050] OMAP2_MCSPI_MODULCTRL 0x1 [ 9.006060] OMAP2_MCSPI_CHCONF0 0x180103c5 [ 9.006152] Initial OMAP2_MCSPI_IRQSTATUS{0x0}OMAP2_MCSPI_IRQENABLE{0x0} [ 9.006323] hash ok [ 9.006339] hashtest OK [ 9.006583] bitmain-asic: success to register device [ 9.016165] hardware_version = 0x0 [ 9.016378] bitmain_asic_open ok [ 9.020571] fdata.pdata{0x10bc0}len{8192} [ 9.048827] fdata.pdata{0x10bc0}len{8192} [ 9.076817] fdata.pdata{0x10bc0}len{8192} [ 9.104815] fdata.pdata{0x10bc0}len{8192} [ 9.132766] fdata.pdata{0x10bc0}len{8192} [ 9.160721] fdata.pdata{0x10bc0}len{8192} [ 9.188672] fdata.pdata{0x10bc0}len{8192} [ 9.216616] fdata.pdata{0x10bc0}len{8192} [ 9.244585] fdata.pdata{0x10bc0}len{8192} [ 9.272543] fdata.pdata{0x10bc0}len{8192} [ 9.300511] fdata.pdata{0x10bc0}len{8192} [ 9.328498] fdata.pdata{0x10bc0}len{8192} [ 9.356488] fdata.pdata{0x10bc0}len{8192} [ 9.384487] fdata.pdata{0x10bc0}len{8192} [ 9.412491] fdata.pdata{0x10bc0}len{8192} [ 9.440443] fdata.pdata{0x10bc0}len{8192} [ 9.468378] fdata.pdata{0x10bc0}len{8192} [ 9.496314] fdata.pdata{0x10bc0}len{8192} [ 9.524260] fdata.pdata{0x10bc0}len{8192} [ 9.552191] fdata.pdata{0x10bc0}len{8192} [ 9.580134] fdata.pdata{0x10bc0}len{8192} [ 9.608091] fdata.pdata{0x10bc0}len{8192} [ 9.636054] fdata.pdata{0x10bc0}len{8192} [ 9.664042] fdata.pdata{0x10bc0}len{8192} [ 9.692037] fdata.pdata{0x10bc0}len{8192} [ 9.720025] fdata.pdata{0x10bc0}len{8192} [ 9.747975] fdata.pdata{0x10bc0}len{8192} [ 9.775973] fdata.pdata{0x10bc0}len{8192} [ 9.803966] fdata.pdata{0x10bc0}len{8192} [ 9.831956] fdata.pdata{0x10bc0}len{8192} [ 9.859973] fdata.pdata{0x10bc0}len{8192} [ 9.887956] fdata.pdata{0x10bc0}len{8192} [ 9.915923] fdata.pdata{0x10bc0}len{8192} [ 9.943870] fdata.pdata{0x10bc0}len{8192} [ 9.971813] fdata.pdata{0x10bc0}len{8192} [ 9.999744] fdata.pdata{0x10bc0}len{8192} [ 10.027811] fdata.pdata{0x10bc0}len{8192} [ 10.055769] fdata.pdata{0x10bc0}len{8192} [ 10.083704] fdata.pdata{0x10bc0}len{8192} [ 10.111670] fdata.pdata{0x10bc0}len{8192} [ 10.139645] fdata.pdata{0x10bc0}len{8192} [ 10.167634] fdata.pdata{0x10bc0}len{8192} [ 10.195593] fdata.pdata{0x10bc0}len{8192} [ 10.223569] fdata.pdata{0x10bc0}len{8192} [ 10.251525] fdata.pdata{0x10bc0}len{7563} [ 10.375888] bitmain_asic_close [ 11.152057] net eth0: initializing cpsw version 1.12 (0) [ 11.154357] net eth0: phy found : id is : 0x7c0f1 [ 11.154378] libphy: PHY 4a101000.mdio:01 not found [ 11.159437] net eth0: phy 4a101000.mdio:01 not found on slave 1 [ 14.231343] libphy: 4a101000.mdio:00 - Link is Up - 100/Full [ 28.236575] bitmain-asic: success to unregister device [ 29.258113] compile Oct 29 2014--09:21:50 [ 29.262447] CM_PER_SPI1_CLKCTRL 0x2 [ 29.262465] spi_vaddr 0xfa1a0000 [ 29.262474] version 0x40300a0b [ 29.262481] OMAP2_MCSPI_SYSSTATUS 0x1 [ 29.262490] OMAP2_MCSPI_MODULCTRL 0x1 [ 29.262500] OMAP2_MCSPI_CHCONF0 0x180103c5 [ 29.262573] Initial OMAP2_MCSPI_IRQSTATUS{0x0}OMAP2_MCSPI_IRQENABLE{0x0} [ 29.262681] hash ok [ 29.262696] hashtest OK [ 29.262932] bitmain-asic: success to register device [ 29.371966] hardware_version = 0x0 [ 29.373524] bitmain_asic_open ok [ 29.391830] Detect device [ 29.394668] Send new block cmd [ 29.395237] clear FPGA nonce buffer [ 29.400388] clear FPGA nonce buffer [ 29.404658] get chain0 reg0x0 [ 29.407790] send BC data: [ 29.407790] 0x0000: 0x03 0x00 0x00 0x00 0x84 0x00 0x00 0x11 [ 29.488199] bitmain_lcd: module license 'unspecified' taints kernel. [ 29.488220] Disabling lock debugging due to kernel taint [ 29.489105] kthread ok [ 29.491691] ************ board_new *************** [ 29.514181] asic cmd return 00908013 [ 29.517964] asic cmd return 04908013 [ 29.521712] asic cmd return 08908013 [ 29.525456] asic cmd return 0c908013 [ 29.529201] asic cmd return 10908013 [ 29.564940] asic cmd return 14908013 [ 29.568736] asic cmd return 18908013 [ 29.572483] asic cmd return 1c908013 [ 29.576220] asic cmd return 20908013 [ 29.579953] asic cmd return 24908013 [ 29.588387] asic cmd return 28908013 [ 29.592159] asic cmd return 2c908013 [ 29.595905] asic cmd return 30908013 [ 29.599648] asic cmd return 34908013 [ 29.603390] asic cmd return 38908013 [ 29.624144] asic cmd return 3c908013 [ 29.627946] asic cmd return 40908013 [ 29.631693] asic cmd return 44908013 [ 29.635436] asic cmd return 48908013 [ 29.639178] asic cmd return 4c908013 [ 29.647623] asic cmd return 50908013 [ 29.651415] asic cmd return 54908013 [ 29.655155] asic cmd return 58908013 [ 29.658895] asic cmd return 5c908013 [ 29.662642] asic cmd return 60908013 [ 29.676910] asic cmd return 64908013 [ 29.680760] asic cmd return 68908013 [ 29.684508] asic cmd return 6c908013 [ 29.688250] asic cmd return 70908013 [ 29.691995] asic cmd return 74908013 [ 29.700805] asic cmd return 78908013 [ 29.704611] asic cmd return 7c908013 [ 29.708351] asic cmd return 80908013 [ 29.712089] asic cmd return 84908013 [ 29.715838] asic cmd return 88908013 [ 29.719697] asic cmd return 8c908013 [ 29.723541] asic cmd return 90908013 [ 29.727338] asic cmd return 94908013 [ 29.731081] asic cmd return 98908013 [ 29.734815] asic cmd return 9c908013 [ 29.738692] asic cmd return a0908013 [ 29.742479] asic cmd return a4908013 [ 29.746225] asic cmd return a8908013 [ 29.749967] asic cmd return ac908013 [ 29.753708] asic cmd return b0908013 [ 29.757539] asic cmd return b4908013 [ 29.761305] asic cmd return b8908013 [ 29.765056] asic cmd return bc908013 [ 29.768791] asic cmd return c0908013 [ 29.772529] asic cmd return c4908013 [ 29.776344] asic cmd return c8908013 [ 29.780094] asic cmd return cc908013 [ 29.783840] asic cmd return d0908013 [ 29.787580] asic cmd return d4908013 [ 29.791325] asic cmd return d8908013 [ 29.795141] asic cmd return dc908013 [ 29.798904] asic cmd return e0908013 [ 29.802646] asic cmd return e4908013 [ 29.806390] asic cmd return e8908013 [ 29.810131] asic cmd return ec908013 [ 29.814002] asic cmd return f0908013 [ 29.817751] asic cmd return f4908013 [ 29.821495] asic cmd return f8908013 [ 29.825232] asic cmd return fc908013 [ 29.829047] chain0 total asic:64 [ 29.832428] pos0--addr:00 [ 29.835175] pos1--addr:04 [ 29.837920] pos2--addr:08 [ 29.840663] pos3--addr:0c [ 29.843405] pos4--addr:10 [ 29.846147] pos5--addr:14 [ 29.848890] pos6--addr:18 [ 29.851638] pos7--addr:1c [ 29.854387] pos8--addr:20 [ 29.857126] pos9--addr:24 [ 29.859868] pos10--addr:28 [ 29.862704] pos11--addr:2c [ 29.865542] pos12--addr:30 [ 29.868382] pos13--addr:34 [ 29.871212] pos14--addr:38 [ 29.874049] pos15--addr:3c [ 29.876887] pos16--addr:40 [ 29.879720] pos17--addr:44 [ 29.882552] pos18--addr:48 [ 29.885386] pos19--addr:4c [ 29.888224] pos20--addr:50 [ 29.891056] pos21--addr:54 [ 29.893894] pos22--addr:58 [ 29.896731] pos23--addr:5c [ 29.899563] pos24--addr:60 [ 29.902399] pos25--addr:64 [ 29.905236] pos26--addr:68 [ 29.908073] pos27--addr:6c [ 29.910909] pos28--addr:70 [ 29.913742] pos29--addr:74 [ 29.916579] pos30--addr:78 [ 29.919415] pos31--addr:7c [ 29.922245] pos32--addr:80 [ 29.925077] pos33--addr:84 [ 29.927912] pos34--addr:88 [ 29.930748] pos35--addr:8c [ 29.933587] pos36--addr:90 [ 29.936418] pos37--addr:94 [ 29.939249] pos38--addr:98 [ 29.942080] pos39--addr:9c [ 29.944910] pos40--addr:a0 [ 29.947744] pos41--addr:a4 [ 29.950579] pos42--addr:a8 [ 29.953410] pos43--addr:ac [ 29.956245] pos44--addr:b0 [ 29.959086] pos45--addr:b4 [ 29.961922] pos46--addr:b8 [ 29.964758] pos47--addr:bc [ 29.967594] pos48--addr:c0 [ 29.970430] pos49--addr:c4 [ 29.973266] pos50--addr:c8 [ 29.976100] pos51--addr:cc [ 29.978936] pos52--addr:d0 [ 29.981768] pos53--addr:d4 [ 29.984603] pos54--addr:d8 [ 29.987435] pos55--addr:dc [ 29.990275] pos56--addr:e0 [ 29.993113] pos57--addr:e4 [ 29.995944] pos58--addr:e8 [ 29.998777] pos59--addr:ec [ 30.001612] pos60--addr:f0 [ 30.004458] pos61--addr:f4 [ 30.007294] pos62--addr:f8 [ 30.010128] pos63--addr:fc [ 30.012964] chain0_asic_exist{0xffffffff} [ 30.017163] clear FPGA nonce buffer [ 30.020976] get chain1 reg0x0 [ 30.024085] send BC data: [ 30.024085] 0x0000: 0x03 0x01 0x00 0x00 0x84 0x00 0x00 0x11 [ 30.123478] asic cmd return 00908013 [ 30.127230] asic cmd return 04908013 [ 30.130974] asic cmd return 08908013 [ 30.134733] asic cmd return 0c908013 [ 30.138470] asic cmd return 10908013 [ 30.142289] asic cmd return 14908013 [ 30.146045] asic cmd return 18908013 [ 30.149789] asic cmd return 1c908013 [ 30.153543] asic cmd return 20908013 [ 30.157283] asic cmd return 24908013 [ 30.161113] asic cmd return 28908013 [ 30.164859] asic cmd return 2c908013 [ 30.168604] asic cmd return 30908013 [ 30.172345] asic cmd return 34908013 [ 30.176092] asic cmd return 38908013 [ 30.179900] asic cmd return 3c908013 [ 30.183646] asic cmd return 40908013 [ 30.187397] asic cmd return 44908013 [ 30.191150] asic cmd return 48908013 [ 30.194897] asic cmd return 4c908013 [ 30.198761] asic cmd return 50908013 [ 30.202511] asic cmd return 54908013 [ 30.206253] asic cmd return 58908013 [ 30.209994] asic cmd return 5c908013 [ 30.213740] asic cmd return 60908013 [ 30.217542] asic cmd return 64908013 [ 30.221292] asic cmd return 68908013 [ 30.225037] asic cmd return 6c908013 [ 30.228777] asic cmd return 70908013 [ 30.232521] asic cmd return 74908013 [ 30.236331] asic cmd return 78908013 [ 30.240079] asic cmd return 7c908013 [ 30.243820] asic cmd return 80908013 [ 30.247565] asic cmd return 84908013 [ 30.251305] asic cmd return 88908013 [ 30.255120] asic cmd return 8c908013 [ 30.258867] asic cmd return 90908013 [ 30.262609] asic cmd return 94908013 [ 30.266347] asic cmd return 98908013 [ 30.270091] asic cmd return 9c908013 [ 30.273900] asic cmd return a0908013 [ 30.277651] asic cmd return a4908013 [ 30.281394] asic cmd return a8908013 [ 30.285133] asic cmd return ac908013 [ 30.288872] asic cmd return b0908013 [ 30.292680] asic cmd return b4908013 [ 30.296427] asic cmd return b8908013 [ 30.300169] asic cmd return bc908013 [ 30.303913] asic cmd return c0908013 [ 30.307651] asic cmd return c4908013 [ 30.311949] asic cmd return c8908013 [ 30.315694] asic cmd return cc908013 [ 30.319444] asic cmd return d0908013 [ 30.323186] asic cmd return d4908013 [ 30.326931] asic cmd return d8908013 [ 30.330742] asic cmd return dc908013 [ 30.334491] asic cmd return e0908013 [ 30.338240] asic cmd return e4908013 [ 30.341981] asic cmd return e8908013 [ 30.345719] asic cmd return ec908013 [ 30.349852] asic cmd return f0908013 [ 30.353619] asic cmd return f4908013 [ 30.357358] asic cmd return f8908013 [ 30.361115] asic cmd return fc908013 [ 30.365088] chain1 total asic:64 [ 30.368480] pos0--addr:00 [ 30.371226] pos1--addr:04 [ 30.373978] pos2--addr:08 [ 30.376722] pos3--addr:0c [ 30.379467] pos4--addr:10 [ 30.382217] pos5--addr:14 [ 30.384963] pos6--addr:18 [ 30.387710] pos7--addr:1c [ 30.390455] pos8--addr:20 [ 30.393204] pos9--addr:24 [ 30.395950] pos10--addr:28 [ 30.398786] pos11--addr:2c [ 30.401622] pos12--addr:30 [ 30.404454] pos13--addr:34 [ 30.407289] pos14--addr:38 [ 30.410128] pos15--addr:3c [ 30.412960] pos16--addr:40 [ 30.415799] pos17--addr:44 [ 30.418633] pos18--addr:48 [ 30.421467] pos19--addr:4c [ 30.424307] pos20--addr:50 [ 30.427145] pos21--addr:54 [ 30.429978] pos22--addr:58 [ 30.432812] pos23--addr:5c [ 30.435653] pos24--addr:60 [ 30.438488] pos25--addr:64 [ 30.441319] pos26--addr:68 [ 30.444153] pos27--addr:6c [ 30.446993] pos28--addr:70 [ 30.449831] pos29--addr:74 [ 30.452660] pos30--addr:78 [ 30.455494] pos31--addr:7c [ 30.458325] pos32--addr:80 [ 30.461163] pos33--addr:84 [ 30.464001] pos34--addr:88 [ 30.466860] pos35--addr:8c [ 30.469706] pos36--addr:90 [ 30.472538] pos37--addr:94 [ 30.475370] pos38--addr:98 [ 30.478198] pos39--addr:9c [ 30.481031] pos40--addr:a0 [ 30.483865] pos41--addr:a4 [ 30.486699] pos42--addr:a8 [ 30.489538] pos43--addr:ac [ 30.492373] pos44--addr:b0 [ 30.495210] pos45--addr:b4 [ 30.498045] pos46--addr:b8 [ 30.500880] pos47--addr:bc [ 30.503720] pos48--addr:c0 [ 30.506553] pos49--addr:c4 [ 30.509390] pos50--addr:c8 [ 30.512228] pos51--addr:cc [ 30.515059] pos52--addr:d0 [ 30.517892] pos53--addr:d4 [ 30.520723] pos54--addr:d8 [ 30.523554] pos55--addr:dc [ 30.526386] pos56--addr:e0 [ 30.529217] pos57--addr:e4 [ 30.532051] pos58--addr:e8 [ 30.534888] pos59--addr:ec [ 30.537724] pos60--addr:f0 [ 30.540556] pos61--addr:f4 [ 30.543389] pos62--addr:f8 [ 30.546221] pos63--addr:fc [ 30.549053] chain1_asic_exist{0xffffffff} [ 30.553245] clear FPGA nonce buffer [ 30.558355] get chain2 reg0x0 [ 30.561505] send BC data: [ 30.561505] 0x0000: 0x03 0x02 0x00 0x00 0x84 0x00 0x00 0x11 [ 30.660558] asic cmd return 00908013 [ 30.664312] asic cmd return 04908013 [ 30.668051] asic cmd return 08908013 [ 30.671800] asic cmd return 0c908013 [ 30.675536] asic cmd return 10908013 [ 30.679350] asic cmd return 14908013 [ 30.683091] asic cmd return 18908013 [ 30.686834] asic cmd return 1c908013 [ 30.690572] asic cmd return 20908013 [ 30.694323] asic cmd return 24908013 [ 30.698122] asic cmd return 28908013 [ 30.701863] asic cmd return 2c908013 [ 30.705603] asic cmd return 30908013 [ 30.709341] asic cmd return 34908013 [ 30.713084] asic cmd return 38908013 [ 30.716883] asic cmd return 3c908013 [ 30.720630] asic cmd return 40908013 [ 30.724373] asic cmd return 44908013 [ 30.728117] asic cmd return 48908013 [ 30.731856] asic cmd return 4c908013 [ 30.735657] asic cmd return 50908013 [ 30.739404] asic cmd return 54908013 [ 30.743144] asic cmd return 58908013 [ 30.746884] asic cmd return 5c908013 [ 30.750628] asic cmd return 60908013 [ 30.754428] asic cmd return 64908013 [ 30.758170] asic cmd return 68908013 [ 30.761914] asic cmd return 6c908013 [ 30.765652] asic cmd return 70908013 [ 30.769396] asic cmd return 74908013 [ 30.773213] asic cmd return 78908013 [ 30.776960] asic cmd return 7c908013 [ 30.780701] asic cmd return 80908013 [ 30.784444] asic cmd return 84908013 [ 30.788181] asic cmd return 88908013 [ 30.791994] asic cmd return 8c908013 [ 30.795734] asic cmd return 90908013 [ 30.799475] asic cmd return 94908013 [ 30.803221] asic cmd return 98908013 [ 30.806962] asic cmd return 9c908013 [ 30.810773] asic cmd return a0908013 [ 30.814522] asic cmd return a4908013 [ 30.818263] asic cmd return a8908013 [ 30.822006] asic cmd return ac908013 [ 30.825746] asic cmd return b0908013 [ 30.829554] asic cmd return b4908013 [ 30.833299] asic cmd return b8908013 [ 30.837043] asic cmd return bc908013 [ 30.840785] asic cmd return c0908013 [ 30.844525] asic cmd return c4908013 [ 30.848330] asic cmd return c8908013 [ 30.852078] asic cmd return cc908013 [ 30.855819] asic cmd return d0908013 [ 30.859558] asic cmd return d4908013 [ 30.863299] asic cmd return d8908013 [ 30.867111] asic cmd return dc908013 [ 30.870855] asic cmd return e0908013 [ 30.874599] asic cmd return e4908013 [ 30.878342] asic cmd return e8908013 [ 30.882093] asic cmd return ec908013 [ 30.885901] asic cmd return f0908013 [ 30.889651] asic cmd return f4908013 [ 30.893393] asic cmd return f8908013 [ 30.897137] asic cmd return fc908013 [ 30.900946] chain2 total asic:64 [ 30.904330] pos0--addr:00 [ 30.907079] pos1--addr:04 [ 30.909822] pos2--addr:08 [ 30.912561] pos3--addr:0c [ 30.915305] pos4--addr:10 [ 30.918049] pos5--addr:14 [ 30.920793] pos6--addr:18 [ 30.923536] pos7--addr:1c [ 30.926283] pos8--addr:20 [ 30.929025] pos9--addr:24 [ 30.931772] pos10--addr:28 [ 30.934601] pos11--addr:2c [ 30.937437] pos12--addr:30 [ 30.940277] pos13--addr:34 [ 30.943110] pos14--addr:38 [ 30.945944] pos15--addr:3c [ 30.948781] pos16--addr:40 [ 30.951615] pos17--addr:44 [ 30.954456] pos18--addr:48 [ 30.957293] pos19--addr:4c [ 30.960126] pos20--addr:50 [ 30.962964] pos21--addr:54 [ 30.965801] pos22--addr:58 [ 30.968634] pos23--addr:5c [ 30.971467] pos24--addr:60 [ 30.974298] pos25--addr:64 [ 30.977131] pos26--addr:68 [ 30.979971] pos27--addr:6c [ 30.982802] pos28--addr:70 [ 30.985636] pos29--addr:74 [ 30.988467] pos30--addr:78 [ 30.991302] pos31--addr:7c [ 30.994138] pos32--addr:80 [ 30.996972] pos33--addr:84 [ 30.999806] pos34--addr:88 [ 31.002650] pos35--addr:8c [ 31.005491] pos36--addr:90 [ 31.008322] pos37--addr:94 [ 31.011157] pos38--addr:98 [ 31.013986] pos39--addr:9c [ 31.016830] pos40--addr:a0 [ 31.019658] pos41--addr:a4 [ 31.022490] pos42--addr:a8 [ 31.025322] pos43--addr:ac [ 31.028153] pos44--addr:b0 [ 31.030987] pos45--addr:b4 [ 31.033823] pos46--addr:b8 [ 31.036650] pos47--addr:bc [ 31.039485] pos48--addr:c0 [ 31.042318] pos49--addr:c4 [ 31.045149] pos50--addr:c8 [ 31.047984] pos51--addr:cc [ 31.050818] pos52--addr:d0 [ 31.053652] pos53--addr:d4 [ 31.056490] pos54--addr:d8 [ 31.059324] pos55--addr:dc [ 31.062159] pos56--addr:e0 [ 31.064997] pos57--addr:e4 [ 31.067828] pos58--addr:e8 [ 31.070661] pos59--addr:ec [ 31.073487] pos60--addr:f0 [ 31.076320] pos61--addr:f4 [ 31.079151] pos62--addr:f8 [ 31.081983] pos63--addr:fc [ 31.084841] chain2_asic_exist{0xffffffff} [ 31.089033] clear FPGA nonce buffer
|