|
Title: Coinmine.pl - ETH Pool - stratum support Post by: feeleep on November 03, 2015, 09:46:11 AM Hi Guys,
Having 2+ years of experience we have built a stable environment for our mining pools. All our stratum servers are DDoS protected on IP level (not just CloudFlare web protection) and we have highly scalable environment (we can expand capacity in less than hour). Our Ethereum pool is working well and we have 99,5%+ efficiency however we would like to get more share in ETH pool market. Starting from today we completely removed pool fee (its 0% now and will remain 0% for all users who will join our pool till end of this year) so its only one single step to start mining - create an account, set up auto payout and have fun mining. Our payouts are running every 60 seconds so you dont have to wait a day to receive your coins. https://www2.coinmine.pl/eth/ (https://www2.coinmine.pl/eth/) If you have any questions - please ask. Cheers, feeleep Title: Re: Coinmine.pl - ETH Pool Post by: thepwnorbpwnd on November 29, 2015, 04:54:56 PM I've been notified the pool stats aren't working today?
Title: Re: Coinmine.pl - ETH Pool Post by: feeleep on November 30, 2015, 10:27:18 AM We had some problems then - now everything seems to be OK
Title: Re: Coinmine.pl - ETH Pool Post by: thepwnorbpwnd on November 30, 2015, 07:00:05 PM Pool is down.
Title: Re: Coinmine.pl - ETH Pool Post by: thepwnorbpwnd on December 05, 2015, 01:46:23 AM Is there something up with the pool?
Title: Re: Coinmine.pl - ETH Pool Post by: feeleep on December 16, 2015, 12:54:59 PM Sorry for late response - we had a backend failure that day but now there should be everything fine with the pool.
Additionally I improved backend engine so now orphan rate should drop significantly and we have now reasonable hashrate so everything looks good. feeleep Title: Re: Coinmine.pl - ETH Pool Post by: feeleep on January 21, 2016, 10:44:26 PM Hi,
We added support for stratum compatible with coinotron proxy solution, which should give 10-20% more income (estimation!). This is how you can run it: if you use coinotron proxy just point it to coinmine.pl: linux Code: ./mining-proxy.py -o eth.coinmine.pl -p 4000 Code: mining-proxy.exe -o eth.coinmine.pl -p 4000 and point your miner to Code: ethminer.exe --farm-recheck 200 -G -F http://127.0.0.1:8332/workername:workerpassword You can download coinmine.pl default proxy from: https://github.com/feeleep75/eth-stratum-mining-proxy and just run: linux Code: ./mining-proxy.py Code: mining-proxy.exe Windows compiled proxy: https://github.com/feeleep75/eth-stratum-mining-proxy/releases/download/v1.0/mining_proxy.exe -- feeleep Title: Re: Coinmine.pl - ETH Pool - stratum support Post by: feeleep on January 25, 2016, 12:23:12 PM We added support for stratum enabled qtminer as well:
1. go to https://www2.coinmine.pl/eth/index.php?page=gettingstarted 2. download windows package 3. unpack it and go to qtminer directory 4. run coinmine.cpu.bat or coinmine.opencl.bat if you already use qtminer, you can run it by specifying server address: Code: qtminer -s eth.coinmine.pl:4001 -u yourworker.1 -G You can also find links for Ubuntu QTMiner releases on Getting Started page. cheers, feeleep Title: Re: Coinmine.pl - ETH Pool - stratum support Post by: Xdragon on January 26, 2016, 09:46:51 AM This qtminer works a way better than coinotron proxy solution. I earn 20% more with qtminer, just like according to calculator.
Title: Re: Coinmine.pl - ETH Pool - stratum support Post by: feeleep on January 26, 2016, 09:52:20 AM This qtminer works a way better than coinotron proxy solution. I earn 20% more with qtminer, just like according to calculator. this should not be a difference between those two - to compare it properly you would need to put same hashrate on proxy and qtminer at the same time and and check income after lets say 24 hrs... but I am glad it works for you :) Title: Re: Coinmine.pl - ETH Pool - stratum support Post by: thilan29 on January 27, 2016, 01:27:08 AM When using qtminer, is there any need to put my hash rate into any config file so that I get proper difficulty?
Title: Re: Coinmine.pl - ETH Pool - stratum support Post by: feeleep on January 27, 2016, 11:07:06 AM When using qtminer, is there any need to put my hash rate into any config file so that I get proper difficulty? currently we support only static diff - vardiff requires lot more testing. Title: Re: Coinmine.pl - ETH Pool - stratum support Post by: thilan29 on January 27, 2016, 02:34:22 PM nm
Title: Re: Coinmine.pl - ETH Pool - stratum support Post by: feeleep on January 27, 2016, 05:13:32 PM We can offer private servers for big miners so you do not risk any share loss in case of DDoS - if you are interested send an email to support@coinmine.pl
Title: Re: Coinmine.pl - ETH Pool - stratum support Post by: Xdragon on January 29, 2016, 09:38:38 PM OP you should remove or fix estimated ETH/day(BTC/day), because calculation is misleading. It is a way higher than that :)
Title: Re: Coinmine.pl - ETH Pool - stratum support Post by: feeleep on January 30, 2016, 06:43:57 AM OP you should remove or fix estimated ETH/day(BTC/day), because calculation is misleading. It is a way higher than that :) thanks - the problem with stats is that they represent calculations of hashrate from last 10 minutes and based on that and current difficulty and price they show estimate earnings... Title: Re: Coinmine.pl - ETH Pool - stratum support Post by: z0n0 on February 03, 2016, 11:28:52 AM qtminer vs ethminer-opencl-0.9.41 - which gives better hashspeed/performance/profit with R9 280x?
Title: Re: Coinmine.pl - ETH Pool - stratum support Post by: feeleep on February 03, 2016, 03:24:46 PM qtminer vs ethminer-opencl-0.9.41 - which gives better hashspeed/performance/profit with R9 280x? hi - qtminer is only a wrapper to ethminer - you must have ethminer in the same directory to be able to mine... hashrate is the same Title: Re: Coinmine.pl - ETH Pool - stratum support Post by: kopam on February 04, 2016, 04:47:21 PM Any idea why i am getting this : https://gyazo.com/1f789f9b62da5d6a7caab612454d787c
sometimes it works perfectly, and then it does not ... Any ideas ? Title: Re: Coinmine.pl - ETH Pool - stratum support Post by: feeleep on February 04, 2016, 05:44:16 PM Any idea why i am getting this : https://gyazo.com/1f789f9b62da5d6a7caab612454d787c sometimes it works perfectly, and then it does not ... Any ideas ? something with connection but not sure on which side... can you change address eth.coinmine.pl to 185.34.216.116 and check if this is OK then? Title: Re: Coinmine.pl - ETH Pool - stratum support Post by: kopam on February 07, 2016, 01:04:50 PM Its really strange, mining is all good but i just cant open the web page half of the time today. And all rest is running normally, i also did some connection tests and it seems all should be good on my end. But half of the time its really slow or the web page does not even wanna open.
Title: Re: Coinmine.pl - ETH Pool - stratum support Post by: feeleep on February 07, 2016, 01:12:23 PM Its really strange, mining is all good but i just cant open the web page half of the time today. And all rest is running normally, i also did some connection tests and it seems all should be good on my end. But half of the time its really slow or the web page does not even wanna open. Someone is ddosing website. Mining should not be affected. Title: Re: Coinmine.pl - ETH Pool - stratum support Post by: kopam on February 07, 2016, 01:19:14 PM Ah ok, that was what i wanted to know :) If mining is not affected then i'm all calm and happy :)
Btw, thank you for the great service you are providing. Title: Re: Coinmine.pl - ETH Pool - stratum support Post by: Xdragon on February 08, 2016, 05:13:50 PM Is pool working? I am getting "connection refused" error using qtminer. Can't mine.
edit: With coinotron proxy look like it is working, but no active worker nor hashrate on dashboard Title: Re: Coinmine.pl - ETH Pool - stratum support Post by: feeleep on February 08, 2016, 05:16:13 PM server issue - should be solved now
Title: Re: Coinmine.pl - ETH Pool - stratum support Post by: Xdragon on February 08, 2016, 05:21:38 PM Works again! Thanks
Title: Re: Coinmine.pl - ETH Pool - stratum support Post by: z0n0 on February 15, 2016, 07:46:45 PM BEST POOL OUT THERE!!!
Keep good work guys! Title: Re: Coinmine.pl - ETH Pool - stratum support Post by: feeleep on February 15, 2016, 08:20:42 PM BEST POOL OUT THERE!!! Keep good work guys! Thanks mate! Title: Re: Coinmine.pl - ETH Pool - stratum support Post by: feeleep on February 20, 2016, 11:17:53 PM Our pool is compatible with great ethminer release from Genoil which support stratum!
Grab it from here (1.0.4 beta) https://github.com/Genoil/cpp-ethereum/tree/stratum/releases and run with ethminer.exe -G -S eth.coinmine.pl:4000 -O worker:password Title: Re: Coinmine.pl - ETH Pool - stratum support Post by: z0n0 on February 21, 2016, 09:34:29 AM Our pool is compatible with great ethminer release from Genoil which support stratum! Grab it from here (1.0.4 beta) https://github.com/Genoil/cpp-ethereum/tree/stratum/releases and run with ethminer.exe -G -S eth.coinmine.pl:4000 -O worker:password Any hash speed improvement? Title: Re: Coinmine.pl - ETH Pool - stratum support Post by: feeleep on February 21, 2016, 02:51:15 PM Our pool is compatible with great ethminer release from Genoil which support stratum! Grab it from here (1.0.4 beta) https://github.com/Genoil/cpp-ethereum/tree/stratum/releases and run with ethminer.exe -G -S eth.coinmine.pl:4000 -O worker:password Any hash speed improvement? Hashrate probably the same but with stratum support which should give some additional % to the income due to no delays in getting new work... Title: Re: Coinmine.pl - ETH Pool - stratum support Post by: goldlabel on March 03, 2016, 01:02:42 PM Thx,
Finaly got it all working. ;D Is there a way to putt a limit for the amout of cores/mhz of the cpu? Title: Re: Coinmine.pl - ETH Pool - stratum support Post by: feeleep on March 03, 2016, 01:10:35 PM Thx, Finaly got it all working. ;D Is there a way to putt a limit for the amout of cores/mhz of the cpu? add "-t number" and play with this ;) Title: Re: Coinmine.pl - ETH Pool - stratum support Post by: goldlabel on March 03, 2016, 01:24:07 PM Thx, Finaly got it all working. ;D Is there a way to putt a limit for the amout of cores/mhz of the cpu? add "-t number" and play with this ;) Thx ;) -t is for amout of cores or? Title: Re: Coinmine.pl - ETH Pool - stratum support Post by: feeleep on March 03, 2016, 01:26:06 PM Thx, Finaly got it all working. ;D Is there a way to putt a limit for the amout of cores/mhz of the cpu? add "-t number" and play with this ;) Thx ;) -t is for amout of cores or? yes - it should be Title: Re: Coinmine.pl - ETH Pool - stratum support Post by: Xdragon on March 14, 2016, 07:22:47 PM Looks like pool in not prepared for Homestead hardfork
Title: Re: Coinmine.pl - ETH Pool - stratum support Post by: z0n0 on March 14, 2016, 07:26:32 PM Looks like pool in not prepared for Homestead hardfork Indeed..whats going on filip? Title: Re: Coinmine.pl - ETH Pool - stratum support Post by: Xdragon on March 14, 2016, 08:15:03 PM Pool is probably working, but forntend isn't.
Title: Re: Coinmine.pl - ETH Pool - stratum support Post by: feeleep on March 14, 2016, 08:51:31 PM Pool is probably working, but forntend isn't. Yes - we are mining but some cronjobs failed - I am working on this Title: Re: Coinmine.pl - ETH Pool - stratum support Post by: feeleep on March 14, 2016, 09:15:37 PM everything is fixed now and payouts have been processed
Title: Re: Coinmine.pl - ETH Pool - stratum support Post by: z0n0 on March 16, 2016, 06:40:59 AM What's wrong here?
Code: ethminer --farm-recheck 200 -G -F http://127.0.0.1:8332/my.worker:x --cl-local-work 128 --cl-global-work 8192 http://shrani.si/f/1n/xW/3K7Nn1QW/untitled.png http://shrani.si/f/2g/2Z/1ZIwLyL1/1222.jpg Title: Re: Coinmine.pl - ETH Pool - stratum support Post by: feeleep on March 16, 2016, 06:42:28 AM hi - you must run mining_proxy first
Title: Re: Coinmine.pl - ETH Pool - stratum support Post by: z0n0 on March 16, 2016, 06:44:02 AM hi - you must run mining_proxy first Oh I see. What's your best option/miner without proxy? Which option should I use? Title: Re: Coinmine.pl - ETH Pool - stratum support Post by: feeleep on March 16, 2016, 06:45:05 AM i think the best with proxy - other alternative - qtminer but I saw few users complained about CPU usage...
Title: Re: Coinmine.pl - ETH Pool - stratum support Post by: ThinkHash on March 18, 2016, 03:20:33 PM Whats wrong with www2.coinmine.pl ?? offline??
Title: Re: Coinmine.pl - ETH Pool - stratum support Post by: feeleep on March 18, 2016, 04:17:18 PM Whats wrong with www2.coinmine.pl ?? offline?? it was just a problem with webserver. Mining was working as usual. Title: Re: Coinmine.pl - ETH Pool - stratum support Post by: z0n0 on March 18, 2016, 05:35:23 PM feeleep, is there a way you guys can shoot out some android app where we can monitor our rigs/workers?
that would be nice.. Title: Re: Coinmine.pl - ETH Pool - stratum support Post by: Xdragon on March 26, 2016, 10:47:19 PM Is everything ok with pool? Too many : " waiting for work package" in all my miners
Title: Re: Coinmine.pl - ETH Pool - stratum support Post by: fenomenhaa on March 27, 2016, 12:06:13 AM Something wrong in getwork pool. pls fix it.Client connecing error....
Title: Re: Coinmine.pl - ETH Pool - stratum support Post by: feeleep on March 27, 2016, 04:52:47 AM Something wrong in getwork pool. pls fix it.Client connecing error.... Hi - As I wrote in general thread - That was quite strange problem as I did not receive any notification from my monitoring. I suspect it was a problem on datacenter side which was not allowing connections form some subnets... I will check with them and report here. feeleep Title: Re: Coinmine.pl - ETH Pool - stratum support Post by: seocok on March 28, 2016, 09:21:30 AM Something wrong in getwork pool. pls fix it.Client connecing error.... Hi - As I wrote in general thread - That was quite strange problem as I did not receive any notification from my monitoring. I suspect it was a problem on datacenter side which was not allowing connections form some subnets... I will check with them and report here. feeleep I have the same problem... I did not receive any notification from my monitoring. http://remall.com.ua/coinethermin.PNG Title: Re: Coinmine.pl - ETH Pool - stratum support Post by: feeleep on March 30, 2016, 07:53:00 PM Guys,
I updated mining proxy with improved reconnection protocol and few other fixes. Please update your proxies. Windows compiled version: https://github.com/feeleep75/eth-stratum-mining-proxy/releases Linux source: https://github.com/feeleep75/eth-stratum-mining-proxy feeleep Title: Re: Coinmine.pl - ETH Pool - stratum support Post by: capler on April 03, 2016, 08:42:24 PM Why such misery in the pool?
Who have broken node luck at the pool? ??? Title: Re: Coinmine.pl - ETH Pool - stratum support Post by: z0n0 on April 04, 2016, 04:43:38 AM Why such misery in the pool? Yup, noticed that too... :-\Who have broken node luck at the pool? ??? Title: Re: Coinmine.pl - ETH Pool - stratum support Post by: ocminer on April 04, 2016, 06:43:53 AM feeleep, is there a way you guys can shoot out some android app where we can monitor our rigs/workers? that would be nice.. PoolWatch works with all mpos pools Title: Re: Coinmine.pl - ETH Pool - stratum support Post by: feeleep on April 04, 2016, 07:22:35 AM Why such misery in the pool? Yup, noticed that too... :-\Who have broken node luck at the pool? ??? hmm - i can not do anything to improve luck... we had extremely good (10-20% better) for two weeks in a row, now its bit worse but it means it should be better again soon :) From servers perspective everything looks good. i have 6 backend servers which are loaded 2-5% max feeleep Title: Re: Coinmine.pl - ETH Pool - stratum support Post by: Alehandros on April 13, 2016, 04:09:33 PM Can vouch for this pool, no problems so far at all (been using for a few weeks now)
Title: Re: Coinmine.pl - ETH Pool - stratum support Post by: feeleep on April 14, 2016, 07:33:41 AM Can vouch for this pool, no problems so far at all (been using for a few weeks now) Thanks ;) Title: Re: Coinmine.pl - ETH Pool - stratum support Post by: Xdragon on April 14, 2016, 10:39:45 AM With qtminer I got : "waiting for work package" message since yesterday, checked it again today and it is the same. So I am using your proxy + etherminer. Looks like it is more reliable solution, because it is not first time Qtminer has problems.
Title: Re: Coinmine.pl - ETH Pool - stratum support Post by: feeleep on April 14, 2016, 10:49:34 AM With qtminer I got : "waiting for work package" message since yesterday, checked it again today and it is the same. So I am using your proxy + etherminer. Looks like it is more reliable solution, because it is not first time Qtminer has problems. Damn - both qtminer backend server hung with strange behaviour - port was available but nothing was happening so my monitoring failed in this case. I will check my monitoring later but stratum works again Title: Re: Coinmine.pl - ETH Pool - stratum support Post by: Xdragon on April 25, 2016, 05:21:03 PM What is the correct .bat file for Claymore miner in qtminer mode? I can't get it to work. This is my .bat
Code: EthDcrMiner64.exe -epool eth.coinmine.pl:4001 -ewal USERNAME.WORKER -esm 1 -epsw WORKER_PASS -allpools 1 Title: Re: Coinmine.pl - ETH Pool - stratum support Post by: feeleep on April 25, 2016, 05:24:13 PM What is the correct .bat file for Claymore miner in qtminer mode? I can't get it to work. This is my .bat Code: EthDcrMiner64.exe -epool eth.coinmine.pl:4001 -ewal USERNAME.WORKER -esm 1 -epsw WORKER_PASS -allpools 1 So what do you put as worker and password? Title: Re: Coinmine.pl - ETH Pool - stratum support Post by: Xdragon on April 25, 2016, 05:29:10 PM Here is log file
Code: send: {"id":2,"jsonrpc":"2.0","method":"eth_login","params":["GosnZiva.1","1"]}Title: Re: Coinmine.pl - ETH Pool - stratum support Post by: feeleep on April 25, 2016, 05:32:51 PM Here is log file Code: send: {"id":2,"jsonrpc":"2.0","method":"eth_login","params":["GosnZiva.1","1"]}Ok. I will check it on server side but can you please try to use proxy mode and let me know if it works for you? Title: Re: Coinmine.pl - ETH Pool - stratum support Post by: Xdragon on April 25, 2016, 05:33:57 PM Proxy works, but I like qtminer more :) Thanks
P.S. I think Claymore also stated that he was unable to connect in qtminer mode Title: Re: Coinmine.pl - ETH Pool - stratum support Post by: feeleep on April 25, 2016, 05:34:44 PM Proxy works, but I like qtminer more :) Thanks Ok. Then I will check when I am back @home Title: Re: Coinmine.pl - ETH Pool - stratum support Post by: feeleep on April 25, 2016, 05:38:36 PM Proxy works, but I like qtminer more :) Thanks P.S. I think Claymore also stated that he was unable to connect in qtminer mode And you are sure your worker is not GosnZiva.rig1? Title: Re: Coinmine.pl - ETH Pool - stratum support Post by: Xdragon on April 25, 2016, 05:52:58 PM Proxy works, but I like qtminer more :) Thanks P.S. I think Claymore also stated that he was unable to connect in qtminer mode And you are sure your worker is not GosnZiva.rig1? Title: Re: Coinmine.pl - ETH Pool - stratum support Post by: feeleep on April 25, 2016, 07:42:39 PM Proxy works, but I like qtminer more :) Thanks P.S. I think Claymore also stated that he was unable to connect in qtminer mode And you are sure your worker is not GosnZiva.rig1? I think I found the problem - it should be fixed now Title: Re: Coinmine.pl - ETH Pool - stratum support Post by: Xdragon on April 25, 2016, 08:35:58 PM Yes, it works. Thank you
Title: Re: Coinmine.pl - ETH Pool - stratum support Post by: feeleep on April 29, 2016, 11:05:20 AM Guys,
Would you be interested in stratum servers in different regions than Europe? I can set up servers in Australia, North America, Asia but not sure if there is such demand... feeleep Title: Re: Coinmine.pl - ETH Pool - stratum support Post by: feeleep on May 28, 2016, 08:12:20 AM Guys - I implemented vardiff support for ETH and also some new nodes. Here is latest info:
Static diff 1.5B eth-us.coinmine.pl:4000 - US eth-sg.coinmine.pl:4000 - Singapore eth-eu.coinmine.pl:4000 - Europe eth.coinmine.pl:4000 - Europe but will be with geo location Vardiff eth-us.coinmine.pl:5000 - US eth-sg.coinmine.pl:5000 - Singapore eth-eu.coinmine.pl:5000 - Europe eth.coinmine.pl:5000 - Europe but will be with geo location I am finishing development for requesting difficulty by miners and for accepting stale shares feeleep Title: Re: Coinmine.pl - ETH Pool - stratum support Post by: CoRpO on May 29, 2016, 05:28:40 PM Guys - I implemented vardiff support for ETH and also some new nodes. Here is latest info: Working great, thanks!Static diff 1.5B eth-us.coinmine.pl:4000 - US eth-sg.coinmine.pl:4000 - Singapore eth-eu.coinmine.pl:4000 - Europe eth.coinmine.pl:4000 - Europe but will be with geo location Vardiff eth-us.coinmine.pl:5000 - US eth-sg.coinmine.pl:5000 - Singapore eth-eu.coinmine.pl:5000 - Europe eth.coinmine.pl:5000 - Europe but will be with geo location I am finishing development for requesting difficulty by miners and for accepting stale shares feeleep Title: Re: Coinmine.pl - ETH Pool - stratum support Post by: Xdragon on June 03, 2016, 06:21:43 PM Does vardiff work with Claymore miner? I can't connect to vardiff ports. Static ports(4000 and 4001) work just fine.
Title: Re: Coinmine.pl - ETH Pool - stratum support Post by: feeleep on June 04, 2016, 07:25:33 AM Does vardiff work with Claymore miner? I can't connect to vardiff ports. Static ports(4000 and 4001) work just fine. it should work as backend is exactly the same as port 4000 just with vardiff - any error message you can share? Title: Re: Coinmine.pl - ETH Pool - stratum support Post by: Xdragon on June 04, 2016, 08:51:21 AM http://s33.postimg.org/3k0q3bi27/coinmine.png
P.S. But it is not of a big deal, because I am happy with static diff ports. :D I just wanted to try, and got this error Title: Re: Coinmine.pl - ETH Pool - stratum support Post by: CoRpO on June 06, 2016, 09:41:13 AM I'm using vardiff on port 5000 with claymore's miner without troubles, with eth-eu
Title: Re: Coinmine.pl - ETH Pool - stratum support Post by: Spectr12341234 on July 13, 2016, 09:02:06 AM What happened to the pool. My production was less than half
Title: Re: Coinmine.pl - ETH Pool - stratum support Post by: z0n0 on July 31, 2016, 08:06:04 AM http://s33.postimg.org/3k0q3bi27/coinmine.png P.S. But it is not of a big deal, because I am happy with static diff ports. :D I just wanted to try, and got this error I'm also getting that error with claymore... ??? Title: Re: Coinmine.pl - ETH Pool - stratum support Post by: z0n0 on August 04, 2016, 04:22:12 PM feeleep any news on claymore miner?
still can't get it to work. i'm using: Code: EthDcrMiner64.exe -epool eth.coinmine.pl:3000 -ewal worker.worker -epsw x -esm 3 -allpools 1 -allcoins 1 I have tried port 3000, 4000, 4001, 5000...not one works Title: Re: Coinmine.pl - ETH Pool - stratum support Post by: CoRpO on August 04, 2016, 04:43:01 PM feeleep any news on claymore miner? It's working fine for week for mestill can't get it to work. i'm using: Code: EthDcrMiner64.exe -epool eth.coinmine.pl:3000 -ewal worker.worker -epsw x -esm 3 -allpools 1 -allcoins 1 I have tried port 3000, 4000, 4001, 5000...not one works Code: EthDcrMiner64.exe -epool eth-eu.coinmine.pl:5000 -ewal user.worker -esm 2 -epsw x -allpools 1 -mode 1 Title: Re: Coinmine.pl - ETH Pool - stratum support Post by: z0n0 on August 04, 2016, 05:20:11 PM feeleep any news on claymore miner? It's working fine for week for mestill can't get it to work. i'm using: Code: EthDcrMiner64.exe -epool eth.coinmine.pl:3000 -ewal worker.worker -epsw x -esm 3 -allpools 1 -allcoins 1 I have tried port 3000, 4000, 4001, 5000...not one works Code: EthDcrMiner64.exe -epool eth-eu.coinmine.pl:5000 -ewal user.worker -esm 2 -epsw x -allpools 1 -mode 1 Thank you sir! It's working now. Can you pls explain "-esm 2" ? Does it matter if I put here 0 or 1 ? Title: Re: Coinmine.pl - ETH Pool - stratum support Post by: z0n0 on August 04, 2016, 05:39:32 PM Any idea what is that DevFee ?
What does that FAILOVER 1 means? http://imgur.com/a/zdbe9 Title: Re: Coinmine.pl - ETH Pool - stratum support Post by: CoRpO on August 04, 2016, 09:03:42 PM Any idea what is that DevFee ? All is explained here : https://bitcointalk.org/index.php?topic=1433925.0What does that FAILOVER 1 means? http://imgur.com/a/zdbe9 -esm is stratum mode (not each pools use the same stratum mode, it's just a different way of doing the same thing) Title: Re: Coinmine.pl - ETH Pool - stratum support Post by: z0n0 on August 18, 2016, 01:12:51 PM Hi feeleep, any plans on SIA pool / merged mining ETH+SAI with claymore miner which is very popular nowdays?
Title: Re: Coinmine.pl - ETH Pool - stratum support Post by: Alehandros on August 31, 2016, 08:35:28 AM Guys - I implemented vardiff support for ETH and also some new nodes. Here is latest info: Static diff 1.5B eth-us.coinmine.pl:4000 - US eth-sg.coinmine.pl:4000 - Singapore eth-eu.coinmine.pl:4000 - Europe eth.coinmine.pl:4000 - Europe but will be with geo location Vardiff eth-us.coinmine.pl:5000 - US eth-sg.coinmine.pl:5000 - Singapore eth-eu.coinmine.pl:5000 - Europe eth.coinmine.pl:5000 - Europe but will be with geo location I am finishing development for requesting difficulty by miners and for accepting stale shares feeleep provided I have the hardware, what are the advantages of going Vardiff? greater efficiency? thanks Title: Re: Coinmine.pl - ETH Pool - stratum support Post by: z0n0 on September 28, 2016, 12:43:10 AM Issues with ethereum network again. I disabled payouts until it is resolved.
When will this be resolved? Title: Re: Coinmine.pl - ETH Pool - stratum support Post by: CoRpO on October 03, 2016, 09:27:46 AM coinmine.pl is offline? Here it's working finegone? Title: Re: Coinmine.pl - ETH Pool - stratum support Post by: feeleep on October 17, 2016, 10:41:58 AM Hi - payouts are enabled now.
I processed all missing transactions manually but if you still miss anything please let me know -- feeleep Title: Re: Coinmine.pl - ETH Pool - stratum support Post by: gross on January 17, 2017, 06:42:10 PM Please, add HiGH DIFF statum port (>0.4 ) for nicehash
Title: Re: Coinmine.pl - ETH Pool - stratum support Post by: z0n0 on June 21, 2017, 06:59:02 PM bump
|
