Title: Compac/R1/U3 - Overclock/Mod Showoff Thread Post by: kilo17 on February 24, 2016, 11:09:06 PM Since posting mods and overclock results tends to divert most threads I thought I would start one. Please use the following rules on this thread:
1- Post Mods and Overclock results for the Compac/R1/U3 only. Will modify as new small miners are released. 2- For overclock results, please include pertinent info as shown below: - Freq- - Cooling; - Software 3- On overclock posts, please have a minimum of a 5 minute run with minimal HW errors. Thanks Title: Re: Compact/R1/U3 - Overclock/Mod Showoff Thread Post by: kilo17 on February 24, 2016, 11:11:31 PM Here is an overclock of a GekkoScience Compac;
Freq- 435 Cooling - Stock Bfgminer 5.4.1 on a Raspi https://i.imgur.com/oKN7MVz.png Title: Re: Compact/R1/U3 - Overclock/Mod Showoff Thread Post by: philipma1957 on February 24, 2016, 11:11:34 PM Since posting mods and overclock results is diverts most threads I thought I would start one. Please use the following rules on this thread: 1- Post Mods and Overclock results for the Compact/R1/U3 only. Will modify as new small miners are released. 2- For overclock results, please include pertinent info like Freq. and cooling method. 3- On overclock posts, please have a minimum of a 5 minute run with minimal HW errors. Thanks Do you mean a compac from sidehack. Title: Re: Compac/R1/U3 - Overclock/Mod Showoff Thread Post by: kilo17 on February 24, 2016, 11:13:34 PM Since posting mods and overclock results is diverts most threads I thought I would start one. Please use the following rules on this thread: 1- Post Mods and Overclock results for the Compact/R1/U3 only. Will modify as new small miners are released. 2- For overclock results, please include pertinent info like Freq. and cooling method. 3- On overclock posts, please have a minimum of a 5 minute run with minimal HW errors. Thanks Do you mean a compac from sidehack. yes - damn spell check-- Title: Re: Compac/R1/U3 - Overclock/Mod Showoff Thread Post by: kilo17 on February 24, 2016, 11:19:31 PM Example of a modified Compac:
Modification- Solid copper heatsink applied with Arctic Silver Adhesive/Epoxy and stabilized with Arctic Thermal Pad https://i.imgur.com/EbCgEJg.jpg https://i.imgur.com/blEK1oP.jpg Title: Re: Compac/R1/U3 - Overclock/Mod Showoff Thread Post by: Guruclef on February 25, 2016, 04:00:21 AM Example of a modified Compac: Modification- Solid copper heatsink applied with Arctic Silver Adhesive/Epoxy and stabilized with Arctic Thermal Pad https://i.imgur.com/EbCgEJg.jpg https://i.imgur.com/blEK1oP.jpg Wow that looks cool! Does it perform better than your other stick ? (The stock one) Title: Re: Compac/R1/U3 - Overclock/Mod Showoff Thread Post by: kilo17 on February 25, 2016, 08:36:50 AM Example of a modified Compac: Modification- Solid copper heatsink applied with Arctic Silver Adhesive/Epoxy and stabilized with Arctic Thermal Pad https://i.imgur.com/EbCgEJg.jpg https://i.imgur.com/blEK1oP.jpg Wow that looks cool! Does it perform better than your other stick ? (The stock one) I haven't pushed it yet but will soon. ;D Title: Re: Compac/R1/U3 - Overclock/Mod Showoff Thread Post by: sobe-it on February 28, 2016, 12:30:28 AM These count? I can pull it off the shelf and give it some run time with each heat sink set up.
https://scontent-iad3-1.xx.fbcdn.net/hphotos-xtp1/v/t1.0-9/10534565_1121054071239554_6558526490921846673_n.jpg?oh=ee43fc75a9dde15869b93d4f597c26a3&oe=57650493 https://scontent-iad3-1.xx.fbcdn.net/hphotos-xpt1/v/t1.0-9/1506668_1121054111239550_9087065938270963885_n.jpg?oh=c42ba7e5afa83136390f2ed82604f69c&oe=575496C3 https://ip.bitcointalk.org/?u=https%3A%2F%2Fscontent-lga3-1.xx.fbcdn.net%2Fhphotos-xlf1%2Fv%2Ft1.0-9%2F12733435_1182584358419858_7448945372329758153_n.jpg%3Foh%3Dca6b85b5c8ded398a3687b37162f03ab%26oe%3D575B0DF7&t=561&c=ft5KgRy2-WJYPg Title: Re: Compac/R1/U3 - Overclock/Mod Showoff Thread Post by: kilo17 on February 28, 2016, 02:42:14 AM I love the mods
|