|
Title: √ √ Kiklo's Premium Blockchain Snapshot Service √ √ Post by: kiklo on February 27, 2016, 05:48:58 AM This Snapshot service have moved, because of the btctalk's broken trust system
Go to https://www.cryptopia.co.nz/Forum/Thread/1349 for the updated Service. 8) _______________________________________________________________________________ _______ Kiklo's Premium Blockchain Snapshot Service You will need a program that can uncompress rar files to access the files. example: http://rarlabs.com/download.htm Tech Tips: Always scan a download for Viruses before installing , one such service is https://www.virustotal.com . Our Blockchain Snapshots can be installed on a New or Already Working Wallet. SnapShots will install much Faster than the BootStraps. Difference between a Bootstrap vs a Snapshot. (https://bitcointalk.org/index.php?topic=1378653.msg16022247#msg16022247) Instructions on How to Install a Bootstrap.dat file is on the very next Post. Instructions on How to Install a SnapShot is included when you click on the SnapShot Link in the following table.
_______________________________________________________________________________ _____ Services for BlockChain SnapShots Direct Link to Snapshot download Exact Date created included in the Snapshot Post SHA-256 Hash Generated so you can verify the File download matches the original created file. Snapshot & BootStrap Updated every 2 weeks Current Price is 250 thousand ZEIT per month per coin to add these options. (Only ZEIT Accepted) Direct Link to the top of this OP. Code: [url=https://bitcointalk.org/index.php?topic=1378653.msg14024451#msg14024451]Kiklo's Premium Blockchain Snapshot Service [/url] Title: Kiklo's Bootstrap.dat & Blockchain Snapshot for Proof of Stake Coins Post by: kiklo on February 27, 2016, 05:49:15 AM How to install a Bootstrap.dat file
After downloading and uncompressing the rar file , Start up your new Wallet software, after it opens, then Close it, (In windows , this allows the new wallet to create the folder under C:\Users\"username"\AppData\Roaming\WalletNameHere ) Copy the bootstrap.dat file in the folder c:\Users\"username"\AppData\Roaming\WalletNameHere (for Windows) or in the WalletNameHere data folder for other OSes. Now Start the New Wallet to import the BootStrap.dat , (Depending on your PC and the size of the bootstrap , this can take many hours) (You can watch the progress of the import by opening the folder c:\Users\"username"\AppData\Roaming\WalletNameHere and watch the blk0001.dat file size to see how close it is to the bootstrap.dat to get a feel for how much longer it might be) once finished it will then begin synchronization to retrieve any blocks found after the Bootstrap was created. (Tech Note, the wallet does not completely Open until it finishes the Import.) Bootstraps can dramatically decrease the time required to sync a new wallet, especially one that is over a year old. The only thing faster is a Blockchain Snapshot , which is currently the fastest way to sync a coin. This Bootstrap service is basically free, we would appreciate it if the people running the OPs would place a link to us here, that frees them from the tedious work of keeping a bootstrap updated where they can focus their time on more important matters, and in exchange we will update their Bootstrap on a ~ 2 monthly basis. 8) Bootstraps can be downloaded from the Blockchain Folder at https://mega.nz/#F!CJRnyDDL!vbYN-3mvj9RBE7Phl27Sjg (https://mega.nz/#F!CJRnyDDL!vbYN-3mvj9RBE7Phl27Sjg) Title: ZEIT BLOCKCHAIN SNAPSHOT (The Fastest Way to Sync a Wallet) Post by: kiklo on February 27, 2016, 05:49:40 AM This Snapshot service have moved, because of the btctalk's broken trust system
Go to https://www.cryptopia.co.nz/Forum/Thread/1349 for the updated Service. 8) ZEIT BLOCKCHAIN SNAPSHOT (The Fastest Way to Sync) Latest Version 2.0.1.7 Gauntlet Windows: http://zeit-coin.net/beta/zeitcoin-qt.exe MacOS: http://zeit-coin.net/beta/zeitcoin-2017-gauntlet.dmg Linux : https://github.com/zeitcoin/zeitcoin _______________________________________________________________________________ ____ You will need a program that can uncompress rar files, example: http://rarlabs.com/download.htm Filename: ZeitBlockChainSnapShot-2017-05-10.rar SHA-256: B9D8F5E9A6ACEB4181452913A877BB8C00103D8D70A9D3708F673A6AF1DC1FBE Direct Link : https://mega.nz/#!GNYAHYjb!gnfY9OsKoE8aGvrf2bQlTT5j8fsZO2PQS12EtpN1t2c (https://mega.nz/#!GNYAHYjb!gnfY9OsKoE8aGvrf2bQlTT5j8fsZO2PQS12EtpN1t2c) General Link: https://mega.nz/#F!DBxjDbgC!3Um0nxoE4QZlJ8Co_-EDsg (https://mega.nz/#F!DBxjDbgC!3Um0nxoE4QZlJ8Co_-EDsg) http://onlinemd5.com can be used to verify the above checksums. NEW Wallet: Install Instructions Make a Zeitcoin folder under C:\Users\"username"\AppData\Roaming\ Then Extract and copy the files from ZeitcoinBlockchainSnapShot.rar into C:\Users\"username"\AppData\Roaming\Zeitcoin Then open Zeitcoin and it will start syncing the BlockChain from the last snapshot. ACTIVE Wallet:Install Instructions , (Be sure to have a backup of your Wallet.dat 1st) Make sure Zeitcoin is closed Go under c:\Users\"username"\AppData\Roaming\Zeitcoin (for Windows) or in the Zeitcoin data folder for other OSes Then Delete 4 files : .lock & blk0001.dat & db.log & debug.log Then Delete 2 folders named : database & txleveldb Then Extract and copy the files from ZeitcoinBlockchainSnapshot into C:\Users\"username"\AppData\Roaming\Zeitcoin Then open Zeitcoin and it will start syncing the BlockChain from the last snapshot. Once your Zeit Wallet is completely Synced. Check your Balance, if the Balance is incorrect. Click on Help, click Debug Window, click Console, type in repairwallet and hit enter, then check your Balance If Balance is still not correct. Then From a Command Prompt run zeitcoin-qt.exe -rescan will take a little while but should correct your balance info. List of Addnodes: https://chainz.cryptoid.info/zeit/#!network (https://chainz.cryptoid.info/zeit/#!network) Click Here to See a List of All Available SnapShots. (https://bitcointalk.org/index.php?topic=1378653.msg14024451#msg14024451) Title: √ √ Kiklo's Bootstrap.dat & Blockchain Snapshot for Proof of Stake Coins √ √ Post by: kiklo on February 27, 2016, 06:11:45 AM This Snapshot service have moved, because of the btctalk's broken trust system
Go to https://www.cryptopia.co.nz/Forum/Thread/1349 for the updated Service. 8) HOBONICKEL BLOCKCHAIN SNAPSHOT (The Fastest Way to Sync) Version 1.5.1.0-gf46fa0c-V1.5 used with this Snapshot _______________________________________________________________________________ ____ You will need a program that can uncompress rar files, example: http://rarlabs.com/download.htm Filename: HBNBlockChainSnapShot-(Date Created).rar Download: https://mega.nz/#F!DBxjDbgC!3Um0nxoE4QZlJ8Co_-EDsg (https://mega.nz/#F!DBxjDbgC!3Um0nxoE4QZlJ8Co_-EDsg) NEW Wallet: Install Instructions Make a HoboNickels folder under C:\Users\"username"\AppData\Roaming\ Then Extract and copy the files from HBNBlockchainSnapShot.rar into C:\Users\"username"\AppData\Roaming\HoboNickels Then open HoboNickels-qt.exe and it will start syncing the BlockChain from the last snapshot. ACTIVE Wallet:Install Instructions , (Be sure to have a backup of your Wallet.dat 1st) Make sure HoboNickels is closed Go under c:\Users\"username"\AppData\Roaming\HoboNickels (for Windows) or in the HBN data folder for other OSes Then Delete 5 files : .lock & blk0001.dat & blk0002 & db.log & debug.log Then Delete 2 folders named : database & txleveldb Then Extract and copy the files from HBNBlockchainSnapshot into C:\Users\"username"\AppData\Roaming\HoboNickels Then open HoboNickel and it will start syncing the BlockChain from the last snapshot. Once your HBN Wallet is completely Synced. Check your Balance, if the Balance is incorrect. Click on Help, click Debug Window, click Console, type in repairwallet and hit enter, then check your Balance If Balance is still not correct. Then From a Command Prompt run HoboNickels-qt.exe -rescan will take a little while but should correct your balance info. List of Addnodes: http://www.presstab.pw/phpexplorer/HBN/nodes.php Premium Service Status => INACTIVE = SnapShot & BootStrap Updated ~5 Months Click Here to See a List of All Available SnapShots. (https://bitcointalk.org/index.php?topic=1378653.msg14024451#msg14024451) Title: Re: Kiklo's Bootstrap.dat for Proof of Stake Coins [Under Construction] Post by: Abiky on February 27, 2016, 10:32:12 PM This is a very clever idea for faster syncing of most PoS coins. I have always been looking for something like this and now I can go here each time to speed up the process of some coins that I am holding. The ones I like the most are Tekcoin and Diamond. :)
Title: Re: √ √ Kiklo's Bootstrap.dat & Blockchain Snapshot for Proof of Stake Coins √ √ Post by: BitcoinNational on March 11, 2016, 04:49:38 PM kiklo
get yourself a website for this and a logo will list in the TALK .biz directory ;) Title: Re: √ √ Kiklo's Bootstrap.dat & Blockchain Snapshot for Proof of Stake Coins √ √ Post by: TheTribesman on March 11, 2016, 10:22:02 PM Kiklo
Thanks for the Kobocoin add. It's very much appreciated! I will let the community know. Bounty on it's way to you. Great service. Keep it up! Title: Re: √ √ Kiklo's Bootstrap.dat & Blockchain Snapshot for Proof of Stake Coins √ √ Post by: kiklo on March 12, 2016, 03:54:04 AM kiklo get yourself a website for this and a logo will list in the TALK .biz directory ;) Actually, I considered it, but at this point no real need for a web site., may never need one. :) Better to use BTCTalk , as a medium for communication instead of recreating everything with a web site. If you decide to list me , Here is a clickable url: Kiklo's Bootstrap.dat & Blockchain Snapshot for Proof of Stake Coins (https://bitcointalk.org/index.php?topic=1378653.msg14024451#msg14024451) Copy and Paste the Following Text for a clickable link: Quote [url=https://bitcointalk.org/index.php?topic=1378653.msg14024451#msg14024451]Kiklo's Bootstrap.dat & Blockchain Snapshot for Proof of Stake Coins [/url] Logo, you can resize to whatever dimensions needed.http://s14.postimg.org/4y2ownde9/yin_yang_smiley_face_d76065352.png 8) FYI: I will get TALK added to the Bootstrap list in the next week or so. :) Title: Re: √ √ Kiklo's Bootstrap.dat & Blockchain Snapshot for Proof of Stake Coins √ √ Post by: kiklo on March 12, 2016, 04:21:50 AM Kiklo Thanks for the Kobocoin add. It's very much appreciated! I will let the community know. Bounty on it's way to you. Great service. Keep it up! Thanks, if you add this link , it will take them straight to the top of the OP. Quote [url=https://bitcointalk.org/index.php?topic=1378653.msg14024451#msg14024451]Kiklo's Bootstrap.dat & Blockchain Snapshot for Proof of Stake Coins [/url] 8) Title: Re: √ √ Kiklo's Bootstrap.dat & Blockchain Snapshot for Proof of Stake Coins √ √ Post by: BitcoinNational on March 13, 2016, 08:57:00 AM Actually, I considered it, but at this point no real need for a web site., may never need one. :) Better to use BTCTalk , as a medium for communication instead of recreating everything with a web site. 100% agree on this, says the BTCTalk Coin guy ;) you is listed in OP, i'll put up the standard link if needed, right now short and sweet https://bitcointalk.org/index.php?topic=864994 Title: Re: √ √ Kiklo's Bootstrap.dat & Blockchain Snapshot for Proof of Stake Coins √ √ Post by: presstab on March 13, 2016, 03:40:45 PM Thanks for these bootstraps Kiklo!!
Title: KOBOCOIN BLOCKCHAIN SNAPSHOT (The Fastest Way to Sync a Wallet) Post by: kiklo on March 14, 2016, 06:31:27 AM This Snapshot service have moved, because of the btctalk's broken trust system
Go to https://www.cryptopia.co.nz/Forum/Thread/1349 for the updated Service. 8) KOBOCOIN BLOCKCHAIN SNAPSHOT (The Fastest Way to Sync) Wallet Version v2.1.0.3 used with this SnapShot. _______________________________________________________________________________ _____________________ You will need a program that can uncompress rar files, example: http://rarlabs.com/download.htm Filename: KoboBlockChainSnapShot-(Date Created).rar Download : https://mega.nz/#F!DBxjDbgC!3Um0nxoE4QZlJ8Co_-EDsg (https://mega.nz/#F!DBxjDbgC!3Um0nxoE4QZlJ8Co_-EDsg) http://onlinemd5.com can be used to verify the above checksums. NEW Wallet: Install Instructions Make a Kobocoin folder under C:\Users\"username"\AppData\Roaming\ Then Extract and copy the files from KobocoinBlockchainSnapShot.rar into C:\Users\"username"\AppData\Roaming\Kobocoin Then open Kobocoin and it will start syncing the BlockChain from the last snapshot. ACTIVE Wallet:Install Instructions , (Be sure to have a backup of your Wallet.dat 1st) Make sure Kobocoin is closed Go under c:\Users\"username"\AppData\Roaming\Kobocoin (for Windows) or in the Kobocoin data folder for other OSes Then Delete 4 files : .lock & blk0001.dat & db.log & debug.log Then Delete 2 folders named : database & txleveldb Then Extract and copy the files from KobocoinBlockchainSnapshot into C:\Users\"username"\AppData\Roaming\Kobocoin Then open Kobocoin and it will start syncing the BlockChain from the last snapshot. Once your Kobocoin Wallet is completely Synced. Check your Balance, if the Balance is incorrect. Click on Help, click Debug Window, click Console, type in repairwallet and hit enter, then check your Balance If Balance is still not correct. Then From a Command Prompt run kobocoin-qt.exe -rescan will take a little while but should correct your balance info. List of Addnodes: http://www.presstab.pw/phpexplorer/KOBO/nodes.php Premium Service Status => INACTIVE = SnapShot & BootStrap Updated ~5 Months Click Here to See a List of All Available SnapShots. (https://bitcointalk.org/index.php?topic=1378653.msg14024451#msg14024451) Title: SUPER BLOCKCHAIN SNAPSHOT (The Fastest Way to Sync a Wallet) Post by: kiklo on March 20, 2016, 05:10:50 PM This Snapshot service have moved, because of the btctalk's broken trust system
Go to https://www.cryptopia.co.nz/Forum/Thread/1349 for the updated Service. 8) SUPERCOIN BLOCKCHAIN SNAPSHOT (The Fastest Way to Sync) Wallet Version Ver 4.0.1.0 used with this SnapShot. _______________________________________________________________________________ _____________________ You will need a program that can uncompress rar files, example: http://rarlabs.com/download.htm Filename: SupercoinBlockChainSnapShot-(Date Created).rar Download : https://mega.nz/#F!DBxjDbgC!3Um0nxoE4QZlJ8Co_-EDsg (https://mega.nz/#F!DBxjDbgC!3Um0nxoE4QZlJ8Co_-EDsg) * File is over 1 Gig , Download with MegaSync * NEW Wallet: Install Instructions Make a Supercoin folder under C:\Users\"username"\AppData\Roaming\ Then Extract and copy the files from SupercoinBlockchainSnapShot.rar into C:\Users\"username"\AppData\Roaming\Supercoin Then open Supercoin and it will start syncing the BlockChain from the last snapshot. ACTIVE Wallet:Install Instructions , (Be sure to have a backup of your Wallet.dat 1st) Make sure Supercoin is closed Go under c:\Users\"username"\AppData\Roaming\Supercoin (for Windows) or in the Supercoin data folder for other OSes Then Delete 4 files : .lock & blk0001.dat & db.log & debug.log Then Delete 2 folders named : database & txleveldb Then Extract and copy the files from SupercoinBlockchainSnapshot into C:\Users\"username"\AppData\Roaming\Supercoin Then open Supercoin and it will start syncing the BlockChain from the last snapshot. Once your Supercoin Wallet is completely Synced. Check your Balance, if the Balance is incorrect. Click on Help, click Debug Window, click Console, type in repairwallet and hit enter, then check your Balance If Balance is still not correct. Then From a Command Prompt run Supercoin-qt.exe -rescan will take a little while but should correct your balance info. (This Snapshot is ~2gig, if your internet access is too slow to download the snapshot, use the Bootstrap instead.) List of Addnodes: https://chainz.cryptoid.info/super/#!network (https://chainz.cryptoid.info/super/#!network) Premium Service Status => INACTIVE = SnapShot & BootStrap Updated ~5 Months Click Here to See a List of All Available SnapShots. (https://bitcointalk.org/index.php?topic=1378653.msg14024451#msg14024451) Title: TEKCOIN BLOCKCHAIN SNAPSHOT (The Fastest Way to Sync a Wallet) Post by: kiklo on March 25, 2016, 06:44:53 AM This Snapshot service have moved, because of the btctalk's broken trust system
Go to https://www.cryptopia.co.nz/Forum/Thread/1349 for the updated Service. 8) TEKCOIN BLOCKCHAIN SNAPSHOT (The Fastest Way to Sync) Wallet Version Ver 2.4.1 used with this SnapShot. _______________________________________________________________________________ _____________________ You will need a program that can uncompress rar files, example: http://rarlabs.com/download.htm Filename: TekcoinBlockChainSnapShot-(Date Created).rar Download : https://mega.nz/#F!DBxjDbgC!3Um0nxoE4QZlJ8Co_-EDsg (https://mega.nz/#F!DBxjDbgC!3Um0nxoE4QZlJ8Co_-EDsg) NEW Wallet: Install Instructions Make a Tekcoin folder under C:\Users\"username"\AppData\Roaming\ Then Extract and copy the files from TekcoinBlockchainSnapShot.rar into C:\Users\"username"\AppData\Roaming\Tekcoin Then open Tekcoin and it will start syncing the BlockChain from the last snapshot. ACTIVE Wallet:Install Instructions , (Be sure to have a backup of your Wallet.dat 1st) Make sure Tekcoin is closed Go under c:\Users\"username"\AppData\Roaming\Tekcoin (for Windows) or in the Tekcoin data folder for other OSes Then Delete 5 files : .lock & blk0001.dat & blkindex.dat & debug.log & db.log Then Delete 1 folder named : database Then Extract and copy the files from TekcoinBlockchainSnapshot into C:\Users\"username"\AppData\Roaming\Tekcoin Then open Tekcoin and it will start syncing the BlockChain from the last snapshot. Once your Tekcoin Wallet is completely Synced. Check your Balance, if the Balance is incorrect. Click on Help, click Debug Window, click Console, type in repairwallet and hit enter, then check your Balance If Balance is still not correct. Then From a Command Prompt run Tekcoin-qt.exe -rescan will take a little while but should correct your balance info. List of AddNodes http://www.presstab.pw/phpexplorer/TEK/nodes.php Premium Service Status => INACTIVE = SnapShot & BootStrap Updated ~5 Months Click Here to See a List of All Available SnapShots. (https://bitcointalk.org/index.php?topic=1378653.msg14024451#msg14024451) Title: BITBEAN BLOCKCHAIN SNAPSHOT (The Fastest Way to Sync a Wallet) Post by: kiklo on March 29, 2016, 07:57:27 AM This Snapshot service have moved, because of the btctalk's broken trust system
Go to https://www.cryptopia.co.nz/Forum/Thread/1349 for the updated Service. 8) BITBEAN BLOCKCHAIN SNAPSHOT (The Fastest Way to Sync) Wallet Version Ver 1.1.0.0-g32a928eRC1 used with this SnapShot. _______________________________________________________________________________ _____________________ You will need a program that can uncompress rar files, example: http://rarlabs.com/download.htm Filename: BitBeanBlockChainSnapShot-(Date Created).rar Download : https://mega.nz/#F!DBxjDbgC!3Um0nxoE4QZlJ8Co_-EDsg (https://mega.nz/#F!DBxjDbgC!3Um0nxoE4QZlJ8Co_-EDsg) NEW Wallet: Install Instructions Make a Bitbean folder under C:\Users\"username"\AppData\Roaming\ Then Extract and copy the files from BitBeanBlockchainSnapShot.rar into C:\Users\"username"\AppData\Roaming\Bitbean Then open Bitbean and it will start syncing the BlockChain from the last snapshot. ACTIVE Wallet:Install Instructions , (Be sure to have a backup of your Wallet.dat 1st) Make sure Bitbean is closed Go under c:\Users\"username"\AppData\Roaming\Bitbean (for Windows) or in the Bitbean data folder for other OSes Then Delete 4 files : .lock & blk0001.dat & db.log & debug.log Then Delete 2 folders named : database & txleveldb Then Extract and copy the files from BitbeanBlockchainSnapshot into C:\Users\"username"\AppData\Roaming\Bitbean Then open Bitbean and it will start syncing the BlockChain from the last snapshot. Once your Bitbean Wallet is completely Synced. Check your Balance, if the Balance is incorrect. Click on Help, click Debug Window, click Console, type in repairwallet and hit enter, then check your Balance If Balance is still not correct. Then From a Command Prompt run Bitbean-qt.exe -rescan will take a little while but should correct your balance info. List of AddNodes https://chainz.cryptoid.info/bitb/#!network (https://chainz.cryptoid.info/bitb/#!network) Premium Service Status => INACTIVE = SnapShot & BootStrap Updated ~5 Months Click Here to See a List of All Available SnapShots. (https://bitcointalk.org/index.php?topic=1378653.msg14024451#msg14024451) Title: BTCTALKCOIN BLOCKCHAIN SNAPSHOT (The Fastest Way to Sync a Wallet) Post by: kiklo on April 02, 2016, 03:41:30 AM This Snapshot service have moved, because of the btctalk's broken trust system
Go to https://www.cryptopia.co.nz/Forum/Thread/1349 for the updated Service. 8) BTCTALKCOIN BLOCKCHAIN SNAPSHOT (The Fastest Way to Sync) Wallet Version Ver 1.5.2.0 used with this SnapShot. _______________________________________________________________________________ _____________________ You will need a program that can uncompress rar files, example: http://rarlabs.com/download.htm Filename: BTCtalkBlockChainSnapShot-(Date Created).rar Download : https://mega.nz/#F!DBxjDbgC!3Um0nxoE4QZlJ8Co_-EDsg (https://mega.nz/#F!DBxjDbgC!3Um0nxoE4QZlJ8Co_-EDsg) NEW Wallet: Install Instructions Make a BTCtalkcoin folder under C:\Users\"username"\AppData\Roaming\ Then Extract and copy the files from BTCtalkBlockchainSnapShot.rar into C:\Users\"username"\AppData\Roaming\BTCtalkcoin Then open BTCtalkcoin and it will start syncing the BlockChain from the last snapshot. ACTIVE Wallet:Install Instructions , (Be sure to have a backup of your Wallet.dat 1st) Make sure BTCtalkcoin is closed Go under c:\Users\"username"\AppData\Roaming\BTCtalkcoin (for Windows) or in the BTCtalkcoin data folder for other OSes Then Delete 5 files : .lock & blk0001.dat & blkindex.dat & debug.log & db.log Then Delete 1 folder named : database Then Extract and copy the files from BTCtalkcoinBlockchainSnapshot into C:\Users\"username"\AppData\Roaming\BTCtalkcoin\ Then open BTCtalkcoin and it will start syncing the BlockChain from the last snapshot. Once your BTCtalkcoin Wallet is completely Synced. Check your Balance, if the Balance is incorrect. Click on Help, click Debug Window, click Console, type in repairwallet and hit enter, then check your Balance If Balance is still not correct. Then From a Command Prompt run BTCtalkcoin-qt.exe -rescan will take a little while but should correct your balance info. List of AddNodes https://chainz.cryptoid.info/talk/#!network (https://chainz.cryptoid.info/talk/#!network) https://novaexchange.com/addnodes/TALK/ Premium Service Status => INACTIVE = SnapShot & BootStrap Updated ~5 Months Click Here to See a List of All Available SnapShots. (https://bitcointalk.org/index.php?topic=1378653.msg14024451#msg14024451) Title: SPROUTS BLOCKCHAIN SNAPSHOT (The Fastest Way to Sync) Post by: kiklo on April 09, 2016, 03:57:38 AM This Snapshot service have moved, because of the btctalk's broken trust system
Go to https://www.cryptopia.co.nz/Forum/Thread/1349 for the updated Service. 8) SPROUTS BLOCKCHAIN SNAPSHOT (The Fastest Way to Sync) Wallet Version Ver 0.1.22-gd0cbc83 used with this SnapShot. _______________________________________________________________________________ _____________________ You will need a program that can uncompress rar files, example: http://rarlabs.com/download.htm Filename: SproutsBlockChainSnapShot-(Date Created).rar Download : https://mega.nz/#F!DBxjDbgC!3Um0nxoE4QZlJ8Co_-EDsg (https://mega.nz/#F!DBxjDbgC!3Um0nxoE4QZlJ8Co_-EDsg) http://onlinemd5.com can be used to verify the above checksums. NEW Wallet: Install Instructions Make a Sprouts folder under C:\Users\"username"\AppData\Roaming\ Then Extract and copy the files from SproutsBlockchainSnapShot.rar into C:\Users\"username"\AppData\Roaming\Sprouts Then open Sprouts and it will start syncing the BlockChain from the last snapshot. ACTIVE Wallet:Install Instructions , (Be sure to have a backup of your Wallet.dat 1st) Make sure Sprouts is closed Go under c:\Users\"username"\AppData\Roaming\Sprouts (for Windows) or in the Sprouts data folder for other OSes Then Delete 5 files : .lock & blk0001.dat & blkindex.dat & debug.log & db.log Then Delete 1 folder named : database Then Extract and copy the files from SproutsBlockchainSnapshot into C:\Users\"username"\AppData\Roaming\Sprouts\ Then open Sprouts and it will start syncing the BlockChain from the last snapshot. Once your Sprouts Wallet is completely Synced. Check your Balance, if the Balance is incorrect. Click on Help, click Debug Window, click Console, type in repairwallet and hit enter, then check your Balance If Balance is still not correct. Then From a Command Prompt run Sprouts.exe -rescan will take a little while but should correct your balance info. List of AddNodes https://www.coinexchange.io/network/peers/SPRTS https://chainz.cryptoid.info/sprts/#!network (https://chainz.cryptoid.info/sprts/#!network) Premium Service Status => INACTIVE = SnapShot & BootStrap Updated ~5 Months Click Here to See a List of All Available SnapShots. (https://bitcointalk.org/index.php?topic=1378653.msg14024451#msg14024451) Title: Re: √ √ Kiklo's Bootstrap.dat & Blockchain Snapshot for Proof of Stake Coins √ √ Post by: kiklo on June 07, 2016, 02:45:49 AM This Snapshot service have moved, because of the btctalk's broken trust system
Go to https://www.cryptopia.co.nz/Forum/Thread/1349 for the updated Service. 8) NOBLECOIN BLOCKCHAIN SNAPSHOT (The Fastest Way to Sync) Wallet Version Ver 2.0.2.0 used with this SnapShot. _______________________________________________________________________________ _____________________ You will need a program that can uncompress rar files, example: http://rarlabs.com/download.htm Filename: NobleBlockChainSnapShot-(Date Created).rar Download : https://mega.nz/#F!DBxjDbgC!3Um0nxoE4QZlJ8Co_-EDsg (https://mega.nz/#F!DBxjDbgC!3Um0nxoE4QZlJ8Co_-EDsg) NEW Wallet: Install Instructions Make a NoblecoinPOS folder under C:\Users\"username"\AppData\Roaming\ Then Extract and copy the files from NobleBlockchainSnapShot.rar into C:\Users\"username"\AppData\Roaming\NoblecoinPOS Then open Noblecoin and it will start syncing the BlockChain from the last snapshot. ACTIVE Wallet:Install Instructions , (Be sure to have a backup of your Wallet.dat 1st) Make sure Noblecoin is closed Go under c:\Users\"username"\AppData\Roaming\NoblecoinPOS (for Windows) or in the NoblecoinPOS data folder for other OSes Then Delete 5 files : .lock & blk0001.dat & blkindex.dat & debug.log & db.log Then Delete 1 folder named : database Then Extract and copy the files from NobleBlockchainSnapshot into C:\Users\"username"\AppData\Roaming\NoblecoinPOS\ Then open Noblecoin and it will start syncing the BlockChain from the last snapshot. Once your Noblecoin Wallet is completely Synced. Check your Balance, if the Balance is incorrect. Click on Help, click Debug Window, click Console, type in repairwallet and hit enter, then check your Balance If Balance is still not correct. Then From a Command Prompt run Noblecoin-qt.exe -rescan will take a little while but should correct your balance info. List of AddNodes https://chainz.cryptoid.info/nobl/#!network (https://chainz.cryptoid.info/nobl/#!network) Premium Service Status => INACTIVE = SnapShot & BootStrap Updated ~5 Months Click Here to See a List of All Available SnapShots. (https://bitcointalk.org/index.php?topic=1378653.msg14024451#msg14024451) Title: Re: √ √ Kiklo's Bootstrap.dat & Blockchain Snapshot for Proof of Stake Coins √ √ Post by: kk777 on June 18, 2016, 09:16:51 AM Thanks Kiklo for these SnapShots of the BlockChains. :)
I just started giving interest in BitBean (BITB). So, I want to know the minimum block size of BitBean for sprouting this coin. Can you recomanded the minimum BlockSize of BitBean? As I reccommand the minimum BlockSize of SproutsCoin (SPRTS) is 150K. If you remain open and online Sprouts (SPRTS) wallet daily for 4-5 hours the blocks with 150K can easily mint in 10-20 days. The blocks smaller than 150K (i.e. 100K or 80,000 etc.) will also mint, but it will take more time to mint i.e. 30-40 days. Similarly the blocks bigger than 200K will mint in less than 10 days. And the posotive side of Sprouts is that every blocks mint even a block with 50,000 coins, but it will take around 50-55 days. And you get exact @ 2% daily. If a block with 150K SPRTS mints after 15 days you will get 45,000 SPRTS (@3,000 daily for 15 days). And the block will be splited into two parts, i.e. two blocks with 97,500 SPRTS each [(150,000 + 45,000) / 2] unlikely PayCoin (XPY), the blocks of XPY doesnot get splited, you get minted amount in a new "Custom Change Address". Please share this information about BitBean. Title: Re: √ √ Kiklo's Bootstrap.dat & Blockchain Snapshot for Proof of Stake Coins √ √ Post by: kiklo on July 02, 2016, 05:56:12 AM Please share this information about BitBean. LOL, I think you just did. 8) Title: BLACKCOIN BLOCKCHAIN SNAPSHOT (The Fastest Way to Sync a Wallet) Post by: kiklo on July 02, 2016, 07:51:47 AM This Snapshot service have moved, because of the btctalk's broken trust system
Go to https://www.cryptopia.co.nz/Forum/Thread/1349 for the updated Service. 8) BLACKCOIN BLOCKCHAIN SNAPSHOT (The Fastest Way to Sync) Wallet Version Ver 1.2.4 used with this SnapShot. _______________________________________________________________________________ _____________________ You will need a program that can uncompress rar files, example: http://rarlabs.com/download.htm Filename: BlackcoinBlockChainSnapShot-(Date Created).rar Download : https://mega.nz/#F!DBxjDbgC!3Um0nxoE4QZlJ8Co_-EDsg (https://mega.nz/#F!DBxjDbgC!3Um0nxoE4QZlJ8Co_-EDsg) NEW Wallet: Install Instructions Make a BlackCoin folder under C:\Users\"username"\AppData\Roaming\ Then Extract and copy the files from BlackcoinBlockchainSnapShot.rar into C:\Users\"username"\AppData\Roaming\BlackCoin Then open Blackcoin and it will start syncing the BlockChain from the last snapshot. ACTIVE Wallet:Install Instructions , (Be sure to have a backup of your Wallet.dat 1st) Make sure Blackcoin is closed Go under c:\Users\"username"\AppData\Roaming\BlackCoin (for Windows) or in the BlackCoin data folder for other OSes Then Delete 4 files : .lock & blk0001.dat & db.log & debug.log Then Delete 2 folders named : database & txleveldb Then Extract and copy the files from BlackcoinBlockchainSnapshot into C:\Users\"username"\AppData\Roaming\BlackCoin Then open Blackcoin and it will start syncing the BlockChain from the last snapshot. Once your Blackcoin Wallet is completely Synced. Check your Balance, if the Balance is incorrect. Click on Help, click Debug Window, click Console, type in repairwallet and hit enter, then check your Balance If Balance is still not correct. Then From a Command Prompt run Blackcoin-qt.exe -rescan will take a little while but should correct your balance info. List of AddNodes https://chainz.cryptoid.info/blk/#!network (https://chainz.cryptoid.info/blk/#!network) Premium Service Status => INACTIVE = SnapShot & BootStrap Updated ~5 Months Click Here to See a List of All Available SnapShots. (https://bitcointalk.org/index.php?topic=1378653.msg14024451#msg14024451) Title: BOTTLECAPS BLOCKCHAIN SNAPSHOT (The Fastest Way to Sync a Wallet) Post by: kiklo on July 03, 2016, 07:02:51 AM This Snapshot service have moved, because of the btctalk's broken trust system
Go to https://www.cryptopia.co.nz/Forum/Thread/1349 for the updated Service. 8) BOTTLECAPS BLOCKCHAIN SNAPSHOT (The Fastest Way to Sync) Wallet Version Ver 2.2.2.0-g418187240-Caps2.0 used with this SnapShot. _______________________________________________________________________________ _____________________ You will need a program that can uncompress rar files, example: http://rarlabs.com/download.htm Filename: BottlecapsBlockChainSnapShot-(Date Created).rar Download : https://mega.nz/#F!DBxjDbgC!3Um0nxoE4QZlJ8Co_-EDsg (https://mega.nz/#F!DBxjDbgC!3Um0nxoE4QZlJ8Co_-EDsg) NEW Wallet: Install Instructions Make a BottleCaps folder under C:\Users\"username"\AppData\Roaming\ Then Extract and copy the files from BottlecapsBlockchainSnapShot.rar into C:\Users\"username"\AppData\Roaming\BottleCaps Then open BottleCaps and it will start syncing the BlockChain from the last snapshot. ACTIVE Wallet:Install Instructions , (Be sure to have a backup of your Wallet.dat 1st) Make sure Bottlecaps is closed Go under c:\Users\"username"\AppData\Roaming\BottleCaps (for Windows) or in the BottleCaps data folder for other OSes Then Delete 5 files : .lock & blk0001.dat & blkindex.dat & debug.log & db.log Then Delete 1 folder named : database Then Extract and copy the files from BottlecapsBlockchainSnapshot into C:\Users\"username"\AppData\Roaming\BottleCaps\ Then open Bottlecaps and it will start syncing the BlockChain from the last snapshot. Once your BottleCaps Wallet is completely Synced. Check your Balance, if the Balance is incorrect. Click on Help, click Debug Window, click Console, type in repairwallet and hit enter, then check your Balance If Balance is still not correct. Then From a Command Prompt run Bottlecaps-qt.exe -rescan will take a little while but should correct your balance info. List of AddNodes http://www.presstab.pw/phpexplorer/CAP/nodes.php Premium Service Status => INACTIVE = SnapShot & BootStrap Updated ~5 Months Click Here to See a List of All Available SnapShots. (https://bitcointalk.org/index.php?topic=1378653.msg14024451#msg14024451) Title: Re: √ √ Kiklo's Bootstrap.dat & Blockchain Snapshot Service √ √ Post by: kiklo on July 17, 2016, 11:04:16 AM This Snapshot service have moved, because of the btctalk's broken trust system
Go to https://www.cryptopia.co.nz/Forum/Thread/1349 for the updated Service. 8) SATIVACOIN BLOCKCHAIN SNAPSHOT (The Fastest Way to Sync) Wallet Version v1.3.0.0 used with this SnapShot. _______________________________________________________________________________ _____________________ You will need a program that can uncompress rar files, example: http://rarlabs.com/download.htm Filename: SativacoinBlockchainSnapshot-2017-4-24.rar SHA-256: D0B1EC5D49D55D98DDD94C5D18E1D8A3984130E9BC4636A4C5CCC73581618DA5 Direct Link : https://mega.nz/#!jUIBWLSK!ME2ZgcjsnyOcQbyY1mGi3cESIYF6PeVHFjTlbH6f3fU (https://mega.nz/#!jUIBWLSK!ME2ZgcjsnyOcQbyY1mGi3cESIYF6PeVHFjTlbH6f3fU) General Link: https://mega.nz/#F!DBxjDbgC!3Um0nxoE4QZlJ8Co_-EDsg (https://mega.nz/#F!DBxjDbgC!3Um0nxoE4QZlJ8Co_-EDsg) http://onlinemd5.com can be used to verify the above SHA-256 checksums. NEW Wallet: Install Instructions Make a Sativacoin folder under C:\Users\"username"\AppData\Roaming\ Then Extract and copy the files from SativacoinBlockchainSnapShot.rar into C:\Users\"username"\AppData\Roaming\sativacoin Then open Sativacoin and it will start syncing the BlockChain from the last snapshot. ACTIVE Wallet:Install Instructions , (Be sure to have a backup of your Wallet.dat 1st) Make sure Sativacoin is closed Go under c:\Users\"username"\AppData\Roaming\Sativacoin (for Windows) or in the Sativacoin data folder for other OSes Then Delete 4 files : .lock & blk0001.dat & db.log & debug.log Then Delete 2 folders named : database & txleveldb Then Extract and copy the files from SativacoinBlockchainSnapshot into C:\Users\"username"\AppData\Roaming\sativacoin Then open Sativacoin and it will start syncing the BlockChain from the last snapshot. Once your Sativacoin Wallet is completely Synced. Check your Balance, if the Balance is incorrect. Click on Help, click Debug Window, click Console, type in repairwallet and hit enter, then check your Balance If Balance is still not correct. Then From a Command Prompt run Sativacoin-qt.exe -rescan will take a little while but should correct your balance info. List of AddNodes https://www.cryptopia.co.nz/BlockExplorer?coin=STV Premium Service Status => Active = SnapShot & BootStrap Updated Every 2 Weeks ZEIT Address => MZYR3sPeVJPRbPfLoVyhjUMbcJxGhcajVD Click Here to See a List of All Available SnapShots. (https://bitcointalk.org/index.php?topic=1378653.msg14024451#msg14024451) Title: Re: √ √ Kiklo's Bootstrap.dat & Blockchain Snapshot Service √ √ Post by: fikihafana on July 17, 2016, 02:28:25 PM Do you have tekcoin snapshot & bootstrap, i need 2 days to sync and it's still syncing until now
Title: Re: √ √ Kiklo's Bootstrap.dat & Blockchain Snapshot Service √ √ Post by: kiklo on July 18, 2016, 12:15:49 AM Do you have tekcoin snapshot & bootstrap, i need 2 days to sync and it's still syncing until now If you look at the OP, 1st Post lists all of the coins available https://bitcointalk.org/index.php?topic=1378653.msg14024451#msg14024451 The Last one for Tek was from 5-24-2016, they are not paying for the premium service which is updated every 2 weeks so their updates are ~ 2 months. However since I know you need one, check back in a few hours, I will do a up to date sync. 8) Update : Tek Synced to 7-18-2016 , Bootstrap & SnapShot are Updated Snapshot is Fastest way , Bootstrap can take a day or two Direct Link to Tek SnapShot Post https://bitcointalk.org/index.php?topic=1378653.msg14309285#msg14309285 FYI: the 1st Post of this topic is always updated to show the coins available and links to their snapshops or bootstraps. Title: TRUCKCOIN BLOCKCHAIN SNAPSHOT (The Fastest Way to Sync a Wallet) Post by: kiklo on July 23, 2016, 12:23:49 AM This Snapshot service have moved, because of the btctalk's broken trust system
Go to https://www.cryptopia.co.nz/Forum/Thread/1349 for the updated Service. 8) TRUCKCOIN BLOCKCHAIN SNAPSHOT (The Fastest Way to Sync) Wallet Version Ver 1.0.0.0 used with this SnapShot. _______________________________________________________________________________ _____________________ You will need a program that can uncompress rar files, example: http://rarlabs.com/download.htm Filename: TruckcoinBlockChainSnapShot-(Date Created).rar Download : https://mega.nz/#F!DBxjDbgC!3Um0nxoE4QZlJ8Co_-EDsg (https://mega.nz/#F!DBxjDbgC!3Um0nxoE4QZlJ8Co_-EDsg) NEW Wallet: Install Instructions Make a Truckcoin folder under C:\Users\"username"\AppData\Roaming\ Then Extract and copy the files from TruckcoinBlockchainSnapShot.rar into C:\Users\"username"\AppData\Roaming\Truckcoin Then open Truckcoin and it will start syncing the BlockChain from the last snapshot. ACTIVE Wallet:Install Instructions , (Be sure to have a backup of your Wallet.dat 1st) Make sure Truckcoin is closed Go under c:\Users\"username"\AppData\Roaming\Truckcoin (for Windows) or in the Truckcoin data folder for other OSes Then Delete 5 files : .lock & blk0001.dat & blkindex.dat & debug.log & db.log Then Delete 1 folder named : database Then Extract and copy the files from TruckcoinBlockchainSnapshot into C:\Users\"username"\AppData\Roaming\Truckcoin Then open Truckcoin and it will start syncing the BlockChain from the last snapshot. Once your Truckcoin Wallet is completely Synced. Check your Balance, if the Balance is incorrect. Click on Help, click Debug Window, click Console, type in repairwallet and hit enter, then check your Balance If Balance is still not correct. Then From a Command Prompt run Truckcoin-qt.exe -rescan will take a little while but should correct your balance info. List of AddNodes http://www.presstab.pw/phpexplorer/TRK/nodes.php Premium Service Status => INACTIVE = SnapShot & BootStrap Updated ~5 Months Click Here to See a List of All Available SnapShots. (https://bitcointalk.org/index.php?topic=1378653.msg14024451#msg14024451) Title: Philosopherstone SnapShot Post by: kiklo on July 23, 2016, 06:47:34 PM This Snapshot service have moved, because of the btctalk's broken trust system
Go to https://www.cryptopia.co.nz/Forum/Thread/1349 for the updated Service. 8) PHILOSOPHERSTONE BLOCKCHAIN SNAPSHOT (The Fastest Way to Sync) Wallet Version V 1.6.5.0-gx used with this Snapshot _______________________________________________________________________________ ____ You will need a program that can uncompress rar files, example: http://rarlabs.com/download.htm Filename: PhilosopherstoneBlockChainSnapShot-(Date Created).rar Download: https://mega.nz/#F!DBxjDbgC!3Um0nxoE4QZlJ8Co_-EDsg (https://mega.nz/#F!DBxjDbgC!3Um0nxoE4QZlJ8Co_-EDsg) NEW Wallet: Install Instructions Make a Philosopherstone folder under C:\Users\"username"\AppData\Roaming\ Then Extract and copy the files from PhilosopherstoneBlockchainSnapShot.rar into C:\Users\"username"\AppData\Roaming\Philosopherstone Then open Philosopherstone-qt64.exe and it will start syncing the BlockChain from the last snapshot. ACTIVE Wallet:Install Instructions , (Be sure to have a backup of your Wallet.dat 1st) Make sure Philosopherstone is closed Go under c:\Users\"username"\AppData\Roaming\Philosopherstone (for Windows) or in the Philosopherstone data folder for other OSes Then Delete 5 files : .lock & blk0001.dat & blk0002 & db.log & debug.log Then Delete 2 folders named : database & txleveldb Then Extract and copy the files from PhilosopherstoneBlockchainSnapshot into C:\Users\"username"\AppData\Roaming\Philosopherstone Then open Philosopherstone and it will start syncing the BlockChain from the last snapshot. Once your Philosopherstone Wallet is completely Synced. Check your Balance, if the Balance is incorrect. Click on Help, click Debug Window, click Console, type in repairwallet and hit enter, then check your Balance If Balance is still not correct. Then From a Command Prompt run Philosopherstone-qt64.exe -rescan will take a little while but should correct your balance info. List of AddNodes https://www.cryptopia.co.nz/BlockExplorer?coin=PHS Premium Service Status => INACTIVE = SnapShot & BootStrap Updated ~5 Months Click Here to See a List of All Available SnapShots. (https://bitcointalk.org/index.php?topic=1378653.msg14024451#msg14024451) Title: Pandacoin SnapShot Post by: kiklo on July 26, 2016, 07:48:32 PM This Snapshot service have moved, because of the btctalk's broken trust system
Go to https://www.cryptopia.co.nz/Forum/Thread/1349 for the updated Service. 8) PANDACOIN BLOCKCHAIN SNAPSHOT (The Fastest Way to Sync) Wallet Version 3.0.2 used with this Snapshot _______________________________________________________________________________ ____ You will need a program that can uncompress rar files, example: http://rarlabs.com/download.htm Filename: PandacoinBlockChainSnapShot-2017-4-26.rar SHA-256: 27CBD88086E0CB49508FFBE1753D02D410B1CEE9EA9BB84D84E9C4EF371CEF8C Direct Link : https://mega.nz/#!Cd5FRK6Y!a3FmFlKmxGdv0t6xRNEvl083rzcIU_NEMXBPp07suWA (https://mega.nz/#!Cd5FRK6Y!a3FmFlKmxGdv0t6xRNEvl083rzcIU_NEMXBPp07suWA) General Link: https://mega.nz/#F!DBxjDbgC!3Um0nxoE4QZlJ8Co_-EDsg (https://mega.nz/#F!DBxjDbgC!3Um0nxoE4QZlJ8Co_-EDsg) http://onlinemd5.com can be used to verify the above SHA-256 checksums. NEW Wallet: Install Instructions Make a Pandacoin folder under C:\Users\"username"\AppData\Roaming\ Then Extract and copy the files from PandacoinBlockchainSnapShot.rar into C:\Users\"username"\AppData\Roaming\Pandacoin Then open Pandacoin-qt.exe and it will start syncing the BlockChain from the last snapshot. ACTIVE Wallet:Install Instructions , (Be sure to have a backup of your Wallet.dat 1st) Make sure Pandacoin is closed Go under c:\Users\"username"\AppData\Roaming\Pandacoin (for Windows) or in the Pandacoin data folder for other OSes Then Delete 5 files : .lock & blk0001.dat & blk0002 & db.log & debug.log Then Delete 2 folders named : database & txleveldb Then Extract and copy the files from PandacoinBlockchainSnapshot into C:\Users\"username"\AppData\Roaming\Pandacoin Then open Pandacoin and it will start syncing the BlockChain from the last snapshot. Once your Pandacoin Wallet is completely Synced. Check your Balance, if the Balance is incorrect. Click on Help, click Debug Window, click Console, type in repairwallet and hit enter, then check your Balance If Balance is still not correct. Then From a Command Prompt run Pandacoin-qt -rescan will take a little while but should correct your balance info. List of AddNodes https://chainz.cryptoid.info/pnd/#!network (https://chainz.cryptoid.info/pnd/#!network) Premium Service Status => Active = SnapShot & BootStrap Updated Every 2 Weeks ZEIT Address => MYD6NvCFBhUrCKSA97dCUo4Dpprk1h7Lvz Click Here to See a List of All Available SnapShots. (https://bitcointalk.org/index.php?topic=1378653.msg14024451#msg14024451) Title: NETCOIN BLOCKCHAIN SNAPSHOT (The Fastest Way to Sync a Wallet) Post by: kiklo on July 27, 2016, 06:27:45 AM This Snapshot service have moved, because of the btctalk's broken trust system
Go to https://www.cryptopia.co.nz/Forum/Thread/1349 for the updated Service. 8) NETCOIN BLOCKCHAIN SNAPSHOT (The Fastest Way to Sync) Wallet Version Ver 2.5.0.0 used with this SnapShot. _______________________________________________________________________________ _____________________ You will need a program that can uncompress rar files, example: http://rarlabs.com/download.htm Filename: NetcoinBlockChainSnapShot-(Date Created).rar Download : https://mega.nz/#F!DBxjDbgC!3Um0nxoE4QZlJ8Co_-EDsg (https://mega.nz/#F!DBxjDbgC!3Um0nxoE4QZlJ8Co_-EDsg) NEW Wallet: Install Instructions Make a Netcoin folder under C:\Users\"username"\AppData\Roaming\ Then Extract and copy the files from NetcoinBlockchainSnapShot.rar into C:\Users\"username"\AppData\Roaming\Netcoin Then open Netcoin and it will start syncing the BlockChain from the last snapshot. ACTIVE Wallet:Install Instructions , (Be sure to have a backup of your Wallet.dat 1st) Make sure Netcoin is closed Go under c:\Users\"username"\AppData\Roaming\Netcoin (for Windows) or in the Netcoin data folder for other OSes Then Delete 5 files : .lock & blk0001.dat & blkindex.dat & debug.log & db.log Then Delete 2 folders named : database txleveldb Then Extract and copy the files from NetcoinBlockchainSnapshot into C:\Users\"username"\AppData\Roaming\Netcoin Then open Netcoin and it will start syncing the BlockChain from the last snapshot. Once your Netcoin Wallet is completely Synced. Check your Balance, if the Balance is incorrect. Click on Help, click Debug Window, click Console, type in repairwallet and hit enter, then check your Balance If Balance is still not correct. Then From a Command Prompt run Netcoin-qt.exe -rescan will take a little while but should correct your balance info. List of AddNodes https://www.cryptopia.co.nz/BlockExplorer?coin=NET (https://www.cryptopia.co.nz/BlockExplorer?coin=NET) Premium Service Status => INACTIVE = SnapShot & BootStrap Updated ~5 Months Click Here to See a List of All Available SnapShots. (https://bitcointalk.org/index.php?topic=1378653.msg14024451#msg14024451) Title: 1337 Blockchain SnapShot Post by: kiklo on July 28, 2016, 08:03:11 AM This Snapshot service have moved, because of the btctalk's broken trust system
Go to https://www.cryptopia.co.nz/Forum/Thread/1349 for the updated Service. 8) 1337 BLOCKCHAIN SNAPSHOT (The Fastest Way to Sync) Wallet Version v1.7.0.0-g used with this Snapshot _______________________________________________________________________________ ____ You will need a program that can uncompress rar files, example: http://rarlabs.com/download.htm Filename: 1337BlockChainSnapShot-(Date Created).rar Download: https://mega.nz/#F!DBxjDbgC!3Um0nxoE4QZlJ8Co_-EDsg (https://mega.nz/#F!DBxjDbgC!3Um0nxoE4QZlJ8Co_-EDsg) NEW Wallet: Install Instructions Make a 1337 folder under C:\Users\"username"\AppData\Roaming\ Then Extract and copy the files from 1337BlockchainSnapShot.rar into C:\Users\"username"\AppData\Roaming\1337 Then open 1337-qt.exe and it will start syncing the BlockChain from the last snapshot. ACTIVE Wallet:Install Instructions , (Be sure to have a backup of your Wallet.dat 1st) Make sure 1337 is closed Go under c:\Users\"username"\AppData\Roaming\1337 (for Windows) or in the 1337 data folder for other OSes Then Delete 5 files : .lock & blk0001.dat & blk0002 & db.log & debug.log Then Delete 2 folders named : database & txleveldb Then Extract and copy the files from 1337BlockchainSnapshot into C:\Users\"username"\AppData\Roaming\1337 Then open 1337 and it will start syncing the BlockChain from the last snapshot. Once your 1337 Wallet is completely Synced. Check your Balance, if the Balance is incorrect. Click on Help, click Debug Window, click Console, type in repairwallet and hit enter, then check your Balance If Balance is still not correct. Then From a Command Prompt run 1337-qt.exe -rescan will take a little while but should correct your balance info. List of AddNodes http://chain.blockpioneers.info/1337/nodes.php Premium Service Status => INACTIVE = SnapShot & BootStrap Updated ~5 Months Click Here to See a List of All Available SnapShots. (https://bitcointalk.org/index.php?topic=1378653.msg14024451#msg14024451) Title: EVERGREENCOIN BLOCKCHAIN SNAPSHOT (The Fastest Way to Sync a Wallet) Post by: kiklo on August 03, 2016, 05:46:34 AM This Snapshot service have moved, because of the btctalk's broken trust system
Go to https://www.cryptopia.co.nz/Forum/Thread/1349 for the updated Service. 8) EVERGREENCOIN BLOCKCHAIN SNAPSHOT (The Fastest Way to Sync) Wallet Version Ver 1.6.0.1 used with this SnapShot. _______________________________________________________________________________ _____________________ You will need a program that can uncompress rar files, example: http://rarlabs.com/download.htm Filename: EverGreencoinBlockChainSnapShot-(Date Created).rar Download : https://mega.nz/#F!DBxjDbgC!3Um0nxoE4QZlJ8Co_-EDsg (https://mega.nz/#F!DBxjDbgC!3Um0nxoE4QZlJ8Co_-EDsg) NEW Wallet: Install Instructions Make a EverGreenCoin folder under C:\Users\"username"\AppData\Roaming\ Then Extract and copy the files from EverGreencoinBlockchainSnapShot.rar into C:\Users\"username"\AppData\Roaming\EverGreenCoin Then open EverGreenCoin and it will start syncing the BlockChain from the last snapshot. ACTIVE Wallet:Install Instructions , (Be sure to have a backup of your Wallet.dat 1st) Make sure EverGreenCoin is closed Go under c:\Users\"username"\AppData\Roaming\EverGreenCoin (for Windows) or in the EverGreenCoin data folder for other OSes Then Delete 4 files : .lock & blk0001.dat & db.log & debug.log Then Delete 2 folders named : database & txleveldb Then Extract and copy the files from EverGreencoinBlockchainSnapshot into C:\Users\"username"\AppData\Roaming\EverGreenCoin Then open EverGreenCoin and it will start syncing the BlockChain from the last snapshot. Once your EverGreenCoin Wallet is completely Synced. Check your Balance, if the Balance is incorrect. Click on Help, click Debug Window, click Console, type in repairwallet and hit enter, then check your Balance If Balance is still not correct. Then From a Command Prompt run EverGreenCoin-qt.exe -rescan will take a little while but should correct your balance info. List of Seed Nodes seed.evergreencoin.org DDoS protected seed2.evergreencoin.org egc-seed1.granitecoin.com egc-seed2.granitecoin.com egc-seed3.granitecoin.com egc-seed4.granitecoin.com egc-seed5.granitecoin.com Premium Service Status => INACTIVE = SnapShot & BootStrap Updated ~5 Months Click Here to See a List of All Available SnapShots. (https://bitcointalk.org/index.php?topic=1378653.msg14024451#msg14024451) Title: Re: EVERGREENCOIN BLOCKCHAIN SNAPSHOT (The Fastest Way to Sync a Wallet) Post by: EverGreenCoin on August 03, 2016, 06:51:53 AM EVERGREENCOIN BLOCKCHAIN SNAPSHOT (The Fastest Way to Sync) Wallet Version Ver 1.3 used with this SnapShot. _______________________________________________________________________________ _____________________ You will need a program that can uncompress rar files, example: http://rarlabs.com/download.htm Filename: EverGreencoinBlockChainSnapShot-(Date Created).rar Download : https://mega.nz/#F!DBxjDbgC!3Um0nxoE4QZlJ8Co_-EDsg (https://mega.nz/#F!DBxjDbgC!3Um0nxoE4QZlJ8Co_-EDsg) NEW Wallet: Install Instructions Make a EverGreenCoin folder under C:\Users\"username"\AppData\Roaming\ Then Extract and copy the files from EverGreencoinBlockchainSnapShot.rar into C:\Users\"username"\AppData\Roaming\EverGreenCoin Then open EverGreenCoin and it will start syncing the BlockChain from the last snapshot. ACTIVE Wallet:Install Instructions , (Be sure to have a backup of your Wallet.dat 1st) Make sure EverGreenCoin is closed Go under c:\Users\"username"\AppData\Roaming\EverGreenCoin (for Windows) or in the EverGreenCoin data folder for other OSes Then Delete 4 files : .lock & blk0001.dat & db.log & debug.log Then Delete 2 folders named : database & txleveldb Then Extract and copy the files from EverGreencoinBlockchainSnapshot into C:\Users\"username"\AppData\Roaming\EverGreenCoin Then open EverGreenCoin and it will start syncing the BlockChain from the last snapshot. Once your EverGreenCoin Wallet is completely Synced. Check your Balance, if the Balance is incorrect. Click on Help, click Debug Window, click Console, type in repairwallet and hit enter, then check your Balance If Balance is still not correct. Then From a Command Prompt run EverGreenCoin-qt.exe -rescan will take a little while but should correct your balance info. List of Seed Nodes seed.evergreencoin.org DDoS protected seed2.evergreencoin.org egc-seed1.granitecoin.com egc-seed2.granitecoin.com egc-seed3.granitecoin.com egc-seed4.granitecoin.com egc-seed5.granitecoin.com Premium Service Status => INACTIVE = SnapShot & BootStrap Updated ~2 Months Many thanks! Title: E-CurrencyCoin BLOCKCHAIN SNAPSHOT (The Fastest Way to Sync a Wallet) Post by: kiklo on August 04, 2016, 08:44:05 AM This Snapshot service have moved, because of the btctalk's broken trust system
Go to https://www.cryptopia.co.nz/Forum/Thread/1349 for the updated Service. 8) E-CurrencyCoin BLOCKCHAIN SNAPSHOT (The Fastest Way to Sync) Wallet Version 2.4.7.5 used with this SnapShot. _______________________________________________________________________________ _____________________ You will need a program that can uncompress rar files, example: http://rarlabs.com/download.htm Filename: E-CurrencyCoinBlockChainSnapShot-(Date Created).rar Download : https://mega.nz/#F!DBxjDbgC!3Um0nxoE4QZlJ8Co_-EDsg (https://mega.nz/#F!DBxjDbgC!3Um0nxoE4QZlJ8Co_-EDsg) NEW Wallet: Install Instructions Make a ECCoin folder under C:\Users\"username"\AppData\Roaming\ Then Extract and copy the files from E-CurrencyCoinBlockchainSnapShot.rar into C:\Users\"username"\AppData\Roaming\ECCoin Then open E-CurrencyCoin and it will start syncing the BlockChain from the last snapshot. ACTIVE Wallet:Install Instructions , (Be sure to have a backup of your Wallet.dat 1st) Make sure E-CurrencyCoin is closed Go under c:\Users\"username"\AppData\Roaming\ECCoin (for Windows) or in the E-CurrencyCoin data folder for other OSes Then Delete 4 files : .lock & blk0001.dat & db.log & debug.log Then Delete 2 folders named : database & txleveldb Then Extract and copy the files from E-CurrencyCoinBlockchainSnapshot into C:\Users\"username"\AppData\Roaming\ECCoin Then open E-CurrencyCoin and it will start syncing the BlockChain from the last snapshot. Once your E-CurrencyCoin Wallet is completely Synced. Check your Balance, if the Balance is incorrect. Click on Help, click Debug Window, click Console, type in repairwallet and hit enter, then check your Balance If Balance is still not correct. Then From a Command Prompt run ECCoin-qt.exe -rescan will take a little while but should correct your balance info. Premium Service Status => INACTIVE = SnapShot & BootStrap Updated ~5 Months Click Here to See a List of All Available SnapShots. (https://bitcointalk.org/index.php?topic=1378653.msg14024451#msg14024451) Title: DIAMOND BLOCKCHAIN SNAPSHOT (The Fastest Way to Sync a Wallet) Post by: kiklo on August 06, 2016, 03:34:06 AM This Snapshot service have moved, because of the btctalk's broken trust system
Go to https://www.cryptopia.co.nz/Forum/Thread/1349 for the updated Service. 8) DIAMOND BLOCKCHAIN SNAPSHOT (The Fastest Way to Sync) Wallet Version Ver 2.1.0.4 used with this SnapShot. _______________________________________________________________________________ _____________________ You will need a program that can uncompress rar files, example: http://rarlabs.com/download.htm Filename: DiamondBlockChainSnapShot-(Date Created).rar Download : https://mega.nz/#F!DBxjDbgC!3Um0nxoE4QZlJ8Co_-EDsg (https://mega.nz/#F!DBxjDbgC!3Um0nxoE4QZlJ8Co_-EDsg) NEW Wallet: Install Instructions Make a Diamond folder under C:\Users\"username"\AppData\Roaming\ Then Extract and copy the files from DiamondBlockchainSnapShot.rar into C:\Users\"username"\AppData\Roaming\Diamond Then open Diamond and it will start syncing the BlockChain from the last snapshot. ACTIVE Wallet:Install Instructions , (Be sure to have a backup of your Wallet.dat 1st) Make sure Diamond is closed Go under c:\Users\"username"\AppData\Roaming\Diamond (for Windows) or in the Diamond data folder for other OSes Then Delete 5 files : .lock & blk0001.dat & blkindex.dat & debug.log & db.log Then Delete 1 folder named : database Then Extract and copy the files from DiamondBlockchainSnapshot into C:\Users\"username"\AppData\Roaming\Diamond Then open Diamond and it will start syncing the BlockChain from the last snapshot. Once your Diamond Wallet is completely Synced. Check your Balance, if the Balance is incorrect. Click on Help, click Debug Window, click Console, type in repairwallet and hit enter, then check your Balance If Balance is still not correct. Then From a Command Prompt run Diamond-qt-2104.exe -rescan will take a little while but should correct your balance info. List of AddNodes https://chainz.cryptoid.info/dmd/#!network (https://chainz.cryptoid.info/dmd/#!network) Premium Service Status => INACTIVE = SnapShot & BootStrap Updated ~5 Months Click Here to See a List of All Available SnapShots. (https://bitcointalk.org/index.php?topic=1378653.msg14024451#msg14024451) Title: 808 BLOCKCHAIN SNAPSHOT (The Fastest Way to Sync) Post by: kiklo on August 20, 2016, 10:45:08 PM This Snapshot service have moved, because of the btctalk's broken trust system
Go to https://www.cryptopia.co.nz/Forum/Thread/1349 for the updated Service. 8) 808 BLOCKCHAIN SNAPSHOT (The Fastest Way to Sync) Wallet Version Ver 0.1.22-gd0cbc83 used with this SnapShot. _______________________________________________________________________________ _____________________ You will need a program that can uncompress rar files, example: http://rarlabs.com/download.htm Filename: 808-BlockChainSnapShot-(Date Created).rar Download : https://mega.nz/#F!DBxjDbgC!3Um0nxoE4QZlJ8Co_-EDsg (https://mega.nz/#F!DBxjDbgC!3Um0nxoE4QZlJ8Co_-EDsg) NEW Wallet: Install Instructions Make a 808 folder under C:\Users\"username"\AppData\Roaming\ Then Extract and copy the files from 808-BlockchainSnapShot.rar into C:\Users\"username"\AppData\Roaming\808 Then open 808 and it will start syncing the BlockChain from the last snapshot. ACTIVE Wallet:Install Instructions , (Be sure to have a backup of your Wallet.dat 1st) Make sure 808 is closed Go under c:\Users\"username"\AppData\Roaming\808 (for Windows) or in the 808 data folder for other OSes Then Delete 6 files : .lock & blk0001.dat & blkindex.dat & debug.log & db.log & addr.dat Then Delete 1 folder named : database Then Extract and copy the files from 808-BlockchainSnapshot into C:\Users\"username"\AppData\Roaming\808\ Then open 808 and it will start syncing the BlockChain from the last snapshot. Once your 808 Wallet is completely Synced. Check your Balance, if the Balance is incorrect. Click on Help, click Debug Window, click Console, type in repairwallet and hit enter, then check your Balance If Balance is still not correct. Then From a Command Prompt run 808.exe -rescan will take a little while but should correct your balance info. List of AddNodes https://www.cryptopia.co.nz/BlockExplorer?coin=808 Premium Service Status => INACTIVE = SnapShot & BootStrap Updated ~5 Months Click Here to See a List of All Available SnapShots. (https://bitcointalk.org/index.php?topic=1378653.msg14024451#msg14024451) Title: Re: MINTCOIN BLOCKCHAIN SNAPSHOT (The Fastest Way to Sync a Wallet) Post by: Tubularwindow on August 24, 2016, 04:10:31 AM MINTCOIN BLOCKCHAIN SNAPSHOT (The Fastest Way to Sync) Wallet Version Ver 2.0.2.0 used with this SnapShot. _______________________________________________________________________________ ____ You will need a program that can uncompress rar files, example: http://rarlabs.com/download.htm Filename : MintcoinBlockChainSnapShot-(Date Created).rar Download: https://mega.nz/#F!DBxjDbgC!3Um0nxoE4QZlJ8Co_-EDsg (https://mega.nz/#F!DBxjDbgC!3Um0nxoE4QZlJ8Co_-EDsg) * File is over 1 Gig , Download with MegaSync * NEW Wallet: Install Instructions Make a Mintcoin folder under C:\Users\"username"\AppData\Roaming\ Then Extract and copy the files from MintcoinBlockchainSnapShot.rar into C:\Users\"username"\AppData\Roaming\Mintcoin Then open Mintcoin and it will start syncing the BlockChain from the last snapshot. ACTIVE Wallet:Install Instructions , (Be sure to have a backup of your Wallet.dat 1st) Make sure Mintcoin is closed Go under c:\Users\"username"\AppData\Roaming\Mintcoin (for Windows) or in the Mintcoin data folder for other OSes Then Delete 4 files : .lock & blk0001.dat & db.log & debug.log Then Delete 2 folders named : database & txleveldb Then Extract and copy the files from MintcoinBlockchainSnapshot into C:\Users\"username"\AppData\Roaming\Mintcoin Then open Mintcoin and it will start syncing the BlockChain from the last snapshot. Once your Mint Wallet is completely Synced. Check your Balance, if the Balance is incorrect. Click on Help, click Debug Window, click Console, type in repairwallet and hit enter, then check your Balance If Balance is still not correct. Then From a Command Prompt run mintcoin-qt.exe -rescan will take a little while but should correct your balance info. List of Addnodes: https://www.cryptopia.co.nz/BlockExplorer?coin=MINT (https://www.cryptopia.co.nz/BlockExplorer?coin=MINT) Click Here to See a List of All Available SnapShots. (https://bitcointalk.org/index.php?topic=1378653.msg14024451#msg14024451) Hi. I'm still learning about these. What exactly is the difference between a Bootstrap vs a Snapshot? What are the pros and cons of each? Sorry if this is explained already. BTW thanks for doing this. Title: Difference between a Bootstrap vs a Snapshot? Post by: kiklo on August 24, 2016, 07:37:46 AM Hi. I'm still learning about these. What exactly is the difference between a Bootstrap vs a Snapshot? What are the pros and cons of each? Sorry if this is explained already. BTW thanks for doing this. A bootstrap.dat file allows a new wallet (not synced) to rapidly import the initial blocks from a local file instead of slowly downloading blocks from random peers across the internet. Since you are pulling the blocks from your hard drive it is much faster than using the internet. However when importing blocks the wallet does have to verify every block, which means a 2 or 3 year old chain can take a few days to import and tie up your memory & processor while verifying the blocks. A Snapshot is a copy of the entire Wallet Database at the time the snapshot was made, it will already include any database directories & all database files. It can be downloaded from the internet and it will start syncing from where it was created, without having to re verify and recreate the other database files & directories. If you download & install a snapshot only created a day or so ago, after installing the snapshot it will be less than 1 hour before your wallet is synced and running. Pros: Snapshot will always be faster, as no re-verification of blocks is done. Bootstrap will always be a smaller download, since it does not include all of the database files, just the one needed for the bootstrap.dat . Cons: Snapshots will always be a Bigger Download. Bootstraps will always take more time to re-verify the blocks and tie up your PC. 8) Title: Re: √ √ Kiklo's Premium Blockchain Snapshot Service √ √ Post by: warbird023 on September 03, 2016, 11:20:24 PM Hello, is the Snapshot usable with zeitcoind ? (The Commandline Version)
I tried it, but after 1 Day it seems to be stuck at 500 Blocks Title: Re: √ √ Kiklo's Premium Blockchain Snapshot Service √ √ Post by: kiklo on September 04, 2016, 06:33:41 AM Hello, is the Snapshot usable with zeitcoind ? (The Commandline Version) I tried it, but after 1 Day it seems to be stuck at 500 Blocks Hmm, Should be , check back in ~24 hours , and I will have an updated ZEIT snapshot to today's date. If that updated snapshot fails, you could use the updated bootstrap instead. (How much ram is in your system?) 8) FYI: ZEIT Blockchain Snapshot Updated to 2016-9-04 ZEIT SNAPSHOT (https://bitcointalk.org/index.php?topic=1378653.msg14024462#msg14024462) 8) Title: Re: √ √ Kiklo's Premium Blockchain Snapshot Service √ √ Post by: warbird023 on September 04, 2016, 07:38:08 PM Hello, is the Snapshot usable with zeitcoind ? (The Commandline Version) I tried it, but after 1 Day it seems to be stuck at 500 Blocks Hmm, Should be , check back in ~24 hours , and I will have an updated ZEIT snapshot to today's date. If that updated snapshot fails, you could use the updated bootstrap instead. (How much ram is in your system?) 8) FYI: ZEIT Blockchain Snapshot Updated to 2016-9-04 ZEIT SNAPSHOT (https://bitcointalk.org/index.php?topic=1378653.msg14024462#msg14024462) 8) Today zeitcoind getinfo tells me that it has indexed 1500 Blocks. This seems to me a neverending Story. I stopped it and start it new with bootstrap.dat . By watching the content of debug.log it seems to be a slow but continous process. I will try this. The System ist a Rapsberry PI 3 with 1GB Ram. Title: Re: √ √ Kiklo's Premium Blockchain Snapshot Service √ √ Post by: kiklo on September 04, 2016, 07:42:36 PM Today zeitcoind getinfo tells me that it has indexed 1500 Blocks. This seems to me a neverending Story. I stopped it and start it new with bootstrap.dat . By watching the content of debug.log it seems to be a slow but continous process. I will try this. The System ist a Rapsberry PI 3 with 1GB Ram. ZEIT by itself will use a little over ~1GB of ram, if the system does not have at least 2 GB, it is probably going to be more trouble than success. (System is probably Page Thrashing (http://www.geekinterview.com/question_details/3333) ) 8) Title: Re: √ √ Kiklo's Premium Blockchain Snapshot Service √ √ Post by: crysx on September 06, 2016, 03:03:15 AM nice kiklo ...
ill continue following this thread now mate ... #crysx Title: Re: √ √ Kiklo's Premium Blockchain Snapshot Service √ √ Post by: RJF19 on October 25, 2016, 01:45:38 PM Hello, is the Snapshot usable with zeitcoind ? (The Commandline Version) I tried it, but after 1 Day it seems to be stuck at 500 Blocks Hmm, Should be , check back in ~24 hours , and I will have an updated ZEIT snapshot to today's date. If that updated snapshot fails, you could use the updated bootstrap instead. (How much ram is in your system?) 8) FYI: ZEIT Blockchain Snapshot Updated to 2016-9-04 ZEIT SNAPSHOT (https://bitcointalk.org/index.php?topic=1378653.msg14024462#msg14024462) 8) Would you be willing to add BitBay (BAY) to the list? Title: Re: √ √ Kiklo's Premium Blockchain Snapshot Service √ √ Post by: kiklo on October 25, 2016, 10:24:51 PM Would you be willing to add BitBay (BAY) to the list? Sure, :) Just started Syncing from Scratch, will post Snapshot & Bootstrap links in a few day. Later, Kiklo Title: BITBAY BLOCKCHAIN SNAPSHOT (The Fastest Way to Sync a Wallet) Post by: kiklo on October 27, 2016, 01:36:51 AM BitBay snapshot removed New wallet release breaks the Snapshot.
BITBAY BLOCKCHAIN SNAPSHOT (The Fastest Way to Sync) Wallet Version Ver 1.0.0.1-g used with this SnapShot. _______________________________________________________________________________ _____________________ You will need a program that can uncompress rar files, example: http://rarlabs.com/download.htm Filename: BitBayBlockChainSnapShot-(Date Created).rar Download : N/A NEW Wallet: Install Instructions Make a BitBay folder under C:\Users\"username"\AppData\Roaming\ Then Extract and copy the files from BitBayBlockchainSnapShot.rar into C:\Users\"username"\AppData\Roaming\BitBay Then open BitBay and it will start syncing the BlockChain from the last snapshot. ACTIVE Wallet:Install Instructions , (Be sure to have a backup of your Wallet.dat 1st) Make sure BitBay is closed Go under c:\Users\"username"\AppData\Roaming\BitBay (for Windows) or in the BitBay data folder for other OSes Then Delete 4 files : .lock & blk0001.dat & db.log & debug.log Then Delete 2 folders named : database & txleveldb Then Extract and copy the files from BitBayBlockchainSnapshot into C:\Users\"username"\AppData\Roaming\BitBay Then open BitBay and it will start syncing the BlockChain from the last snapshot. Once your BitBay Wallet is completely Synced. Check your Balance, if the Balance is incorrect. Click on Help, click Debug Window, click Console, type in repairwallet and hit enter, then check your Balance If Balance is still not correct. Then From a Command Prompt run BitBay-qt.exe -rescan will take a little while but should correct your balance info. List of AddNodes https://chainz.cryptoid.info/bay/#!network (https://chainz.cryptoid.info/bay/#!network) Premium Service Status => INACTIVE = SnapShot & BootStrap Updated ~5 Months Click Here to See a List of All Available SnapShots. (https://bitcointalk.org/index.php?topic=1378653.msg14024451#msg14024451) Title: Re: √ √ Kiklo's Premium Blockchain Snapshot Service √ √ Post by: disco987 on October 27, 2016, 03:14:47 PM If possible to add CloakCoin (CLOAK) to the list?
http://cloakcoin.com/ Regards Title: Re: √ √ Kiklo's Premium Blockchain Snapshot Service √ √ Post by: kiklo on October 31, 2016, 02:32:41 AM If possible to add CloakCoin (CLOAK) to the list? http://cloakcoin.com/ Regards Sure it will be a ~week or so, Hyper √ Einsteinium √ Cloakcoin √ 8) Title: EINSTEINIUM BLOCKCHAIN SNAPSHOT (The Fastest Way to Sync a Wallet) Post by: kiklo on November 04, 2016, 04:54:03 AM This Snapshot service have moved, because of the btctalk's broken trust system
Go to https://www.cryptopia.co.nz/Forum/Thread/1349 for the updated Service. 8) EINSTEINIUM BLOCKCHAIN SNAPSHOT (The Fastest Way to Sync) Wallet Version Ver 0.9.0.0-unk-beta used with this SnapShot. _______________________________________________________________________________ _____________________ You will need a program that can uncompress rar files, example: http://rarlabs.com/download.htm Filename: EinsteiniumBlockChainSnapShot-(Date Created).rar Download : https://mega.nz/#F!DBxjDbgC!3Um0nxoE4QZlJ8Co_-EDsg (https://mega.nz/#F!DBxjDbgC!3Um0nxoE4QZlJ8Co_-EDsg) NEW Wallet: Install Instructions Make a Einsteinium folder under C:\Users\"username"\AppData\Roaming\ Then Extract and copy the files from EinsteiniumBlockchainSnapShot.rar into C:\Users\"username"\AppData\Roaming\Einsteinium Then open Einsteinium and it will start syncing the BlockChain from the last snapshot. ACTIVE Wallet:Install Instructions , (Be sure to have a backup of your Wallet.dat 1st) Make sure Einsteinium is closed Go under c:\Users\"username"\AppData\Roaming\Einsteinium (for Windows) or in the Einsteinium data folder for other OSes Then Delete 3 files : .lock & db.log & debug.log Then Delete 2 folders named : blocks & chainstate Then Extract and copy the files from EinsteiniumBlockchainSnapshot into C:\Users\"username"\AppData\Roaming\Einsteinium Then open Einsteinium and it will start syncing the BlockChain from the last snapshot. Once your Einsteinium Wallet is completely Synced. Check your Balance, if the Balance is incorrect. Click on Help, click Debug Window, click Console, type in repairwallet and hit enter, then check your Balance If Balance is still not correct. Then From a Command Prompt run Einsteinium-qt.exe -rescan will take a little while but should correct your balance info. Premium Service Status => INACTIVE = SnapShot & BootStrap Updated ~5 Months Click Here to See a List of All Available SnapShots. (https://bitcointalk.org/index.php?topic=1378653.msg14024451#msg14024451) Title: CLOAKCOIN BLOCKCHAIN SNAPSHOT (The Fastest Way to Sync a Wallet) Post by: kiklo on November 20, 2016, 06:34:39 AM This Snapshot service have moved, because of the btctalk's broken trust system
Go to https://www.cryptopia.co.nz/Forum/Thread/1349 for the updated Service. 8) CLOAKCOIN BLOCKCHAIN SNAPSHOT (The Fastest Way to Sync) Wallet Version Ver 1.9.7.56 used with this SnapShot. _______________________________________________________________________________ _____________________ You will need a program that can uncompress rar files, example: http://rarlabs.com/download.htm Filename: CloakcoinBlockChainSnapShot-(Date Created).rar Download : https://mega.nz/#F!DBxjDbgC!3Um0nxoE4QZlJ8Co_-EDsg (https://mega.nz/#F!DBxjDbgC!3Um0nxoE4QZlJ8Co_-EDsg) NEW Wallet: Install Instructions Make a CloakCoin folder under C:\Users\"username"\AppData\Roaming\ Then Extract and copy the files from CloakcoinBlockchainSnapShot.rar into C:\Users\"username"\AppData\Roaming\CloakCoin Then open Cloakcoin and it will start syncing the BlockChain from the last snapshot. ACTIVE Wallet:Install Instructions , (Be sure to have a backup of your Wallet.dat 1st) Make sure Cloakcoin is closed Go under c:\Users\"username"\AppData\Roaming\CloakCoin (for Windows) or in the Cloakcoin data folder for other OSes Then Delete 5 files : .lock & blk0001.dat & blkindex.dat & debug.log & db.log Then Delete 1 folder named : database Then Extract and copy the files from CloakcoinBlockchainSnapshot into C:\Users\"username"\AppData\Roaming\CloakCoin Then open Cloakcoin and it will start syncing the BlockChain from the last snapshot. Once your Cloakcoin Wallet is completely Synced. Check your Balance, if the Balance is incorrect. Click on Help, click Debug Window, click Console, type in repairwallet and hit enter, then check your Balance If Balance is still not correct. Then From a Command Prompt run Cloakcoin-qt.exe -rescan will take a little while but should correct your balance info. Premium Service Status => INACTIVE = SnapShot & BootStrap Updated ~5 Months Click Here to See a List of All Available SnapShots. (https://bitcointalk.org/index.php?topic=1378653.msg14024451#msg14024451) Title: Re: √ √ Kiklo's Premium Blockchain Snapshot Service √ √ Post by: revelacaogr on November 20, 2016, 10:07:45 PM Thanks Kiklo!!
much appreciated! Title: Re: √ √ Kiklo's Premium Blockchain Snapshot Service √ √ Post by: Fishmaster42 on December 10, 2016, 04:41:54 AM Thanks again for this service just used it to reload the noble coin wallet. Thanks for your hard work. Fish
Title: Re: √ √ Kiklo's Premium Blockchain Snapshot Service √ √ Post by: kiklo on December 23, 2016, 09:32:03 AM Status Update for the Blockchain Service
Services for BlockChain SnapShots Coins using the Paid Service Direct Link to Snapshot download Exact Date created included in the Snapshot Post SHA-256 Hash Generated so you can verify the File download matches the original created file. Snapshot & BootStrap Updated every 2 weeks Current Price is 250 thousand ZEIT per month per coin to add these options. (Only ZEIT Accepted) ZEIT can be purchased at any of the following exchanges. @ alcurex & CoinXchange & Cryptopia & Nova Exchange & SouthXchange All coins that are using only the free service, snapshots will be updated every ~5 months. 8) Title: Re: √ √ Kiklo's Premium Blockchain Snapshot Service √ √ Post by: HCLivess on January 10, 2017, 09:40:18 AM Thanks for this idea, I have implemented it to Bismuth explorer core
Title: Re: √ √ Kiklo's Premium Blockchain Snapshot Service √ √ Post by: Vin on January 19, 2017, 11:34:24 AM @Kiklo
I have seen your post in the Bitbean thread. Great idea and service. Thank you! Title: Re: √ √ Kiklo's Premium Blockchain Snapshot Service √ √ Post by: kiklo on January 22, 2017, 06:08:47 AM @Dev, Your Latest Wallet Release Breaks My Snapshot for your coin. It automatically loads your Bootstrap.dat and starts overwriting the snapshot, making it useless for your coin. Unless there is a switch to disable your bootstrap from auto loading or a download without the autoloading bootstrap, There will be no point to me offering a snapshot for your coin as it will no longer work. Let me know. Thanks. 8) Left the above message, bitbay dev has not contact me, deleting Bitbay Snapshot as it was broken by their bootstrap.dat being included in the wallet download. Title: Re: √ √ Kiklo's Premium Blockchain Snapshot Service √ √ Post by: bitmaster1x on March 18, 2017, 10:55:05 PM Nice work with the snapshots.
Title: Re: √ √ Kiklo's Premium Blockchain Snapshot Service √ √ Post by: kk777 on March 18, 2017, 11:26:43 PM Please correct the link of "List of AddNodes" of Sprouts.
https://www.cryptopia.co.nz/BlockExplorer?coin=SPRTS I know these links: https://www.coinexchange.io/network/peers/SPRTS https://chainz.cryptoid.info/sprts/#!network (https://chainz.cryptoid.info/sprts/#!network) Title: Re: √ √ Kiklo's Premium Blockchain Snapshot Service √ √ Post by: kiklo on March 20, 2017, 06:41:25 PM Please correct the link of "List of AddNodes" of Sprouts. https://www.cryptopia.co.nz/BlockExplorer?coin=SPRTS I know these links: https://www.coinexchange.io/network/peers/SPRTS https://chainz.cryptoid.info/sprts/#!network (https://chainz.cryptoid.info/sprts/#!network) Done :) 8) Title: Re: √ √ Kiklo's Premium Blockchain Snapshot Service √ √ Post by: Jumanji7 on March 21, 2017, 10:21:28 PM Can you tell me how much time I will need to sync my blackcoin wallet with a SnapShot?
Title: Re: √ √ Kiklo's Premium Blockchain Snapshot Service √ √ Post by: kiklo on March 22, 2017, 03:51:47 AM Can you tell me how much time I will need to sync my blackcoin wallet with a SnapShot? Last Blackcoin snapshot was 4 months ago, so it would probably take ~8 to 12 hours to sync after installing it. However since you asked about it, I am syncing it now, and will update this post , when the snapshot is at today's date, It will take less than 1 hour to sync with that one, if you can wait. Will Post here when the snapshot is updated. 8) Title: Re: √ √ Kiklo's Premium Blockchain Snapshot Service √ √ Post by: Jumanji7 on March 22, 2017, 07:47:01 AM Can you tell me how much time I will need to sync my blackcoin wallet with a SnapShot? Last Blackcoin snapshot was 4 months ago, so it would probably take ~8 to 12 hours to sync after installing it. However since you asked about it, I am syncing it now, and will update this post , when the snapshot is at today's date, It will take less than 1 hour to sync with that one, if you can wait. Will Post here when the snapshot is updated. 8) Thank you for the great work you do kiklo! With this blackcoin snapshot will I be able to stake coins? Title: Re: √ √ Kiklo's Premium Blockchain Snapshot Service √ √ Post by: kiklo on March 22, 2017, 10:39:01 AM Can you tell me how much time I will need to sync my blackcoin wallet with a SnapShot? Last Blackcoin snapshot was 4 months ago, so it would probably take ~8 to 12 hours to sync after installing it. However since you asked about it, I am syncing it now, and will update this post , when the snapshot is at today's date, It will take less than 1 hour to sync with that one, if you can wait. Will Post here when the snapshot is updated. 8) Thank you for the great work you do kiklo! With this blackcoin snapshot will I be able to stake coins? Sure , the snapshot just saves you the time of having to sync the blockchain from scratch. After it is fully synced from your PC, you use it normally. Uploading the Updated Snapshot right now, check the download site in 1½ hour from now and download the blackcoinblockchainsnapshot-2017-3-22, it will sync in a few minutes after installing. Go here for the instructions and download link: https://bitcointalk.org/index.php?topic=1378653.msg15441053#msg15441053 FYI: I removed the older one, since the newer one will be up in an hour. Title: Re: √ √ Kiklo's Premium Blockchain Snapshot Service √ √ Post by: Redni on March 23, 2017, 12:32:14 PM @kiklo, would you be able to update the 1337 blockchain snapshot? Myallet stuck after 15 march and i can not stake :)
Title: Re: √ √ Kiklo's Premium Blockchain Snapshot Service √ √ Post by: kiklo on March 24, 2017, 07:29:35 AM @kiklo, would you be able to update the 1337 blockchain snapshot? Myallet stuck after 15 march and i can not stake :) Make Sure you updated your 1337 Wallet Version to v1.7.0.0-g New Snapshot is Up to 3-24-2017. :) 8) Title: Re: MINTCOIN BLOCKCHAIN SNAPSHOT (The Fastest Way to Sync a Wallet) Post by: titteringtacos on March 26, 2017, 03:26:27 PM MINTCOIN BLOCKCHAIN SNAPSHOT (The Fastest Way to Sync) Wallet Version Ver 2.0.2.0 used with this SnapShot. _______________________________________________________________________________ ____ You will need a program that can uncompress rar files, example: http://rarlabs.com/download.htm Filename : MintcoinBlockChainSnapShot-(Date Created).rar Download: https://mega.nz/#F!DBxjDbgC!3Um0nxoE4QZlJ8Co_-EDsg (https://mega.nz/#F!DBxjDbgC!3Um0nxoE4QZlJ8Co_-EDsg) * File is over 1 Gig , Download with MegaSync * NEW Wallet: Install Instructions Make a Mintcoin folder under C:\Users\"username"\AppData\Roaming\ Then Extract and copy the files from MintcoinBlockchainSnapShot.rar into C:\Users\"username"\AppData\Roaming\Mintcoin Then open Mintcoin and it will start syncing the BlockChain from the last snapshot. ACTIVE Wallet:Install Instructions , (Be sure to have a backup of your Wallet.dat 1st) Make sure Mintcoin is closed Go under c:\Users\"username"\AppData\Roaming\Mintcoin (for Windows) or in the Mintcoin data folder for other OSes Then Delete 4 files : .lock & blk0001.dat & db.log & debug.log Then Delete 2 folders named : database & txleveldb Then Extract and copy the files from MintcoinBlockchainSnapshot into C:\Users\"username"\AppData\Roaming\Mintcoin Then open Mintcoin and it will start syncing the BlockChain from the last snapshot. Once your Mint Wallet is completely Synced. Check your Balance, if the Balance is incorrect. Click on Help, click Debug Window, click Console, type in repairwallet and hit enter, then check your Balance If Balance is still not correct. Then From a Command Prompt run mintcoin-qt.exe -rescan will take a little while but should correct your balance info. List of Addnodes: https://www.cryptopia.co.nz/BlockExplorer?coin=MINT (https://www.cryptopia.co.nz/BlockExplorer?coin=MINT) Premium Service Status => INACTIVE = SnapShot & BootStrap Updated ~5 Months Click Here to See a List of All Available SnapShots. (https://bitcointalk.org/index.php?topic=1378653.msg14024451#msg14024451) my mega is only free account.. file is too large.. is thier anyway to download snapshots? thanks Title: Re: √ √ Kiklo's Premium Blockchain Snapshot Service √ √ Post by: Redni on March 26, 2017, 03:55:23 PM @kiklo, would you be able to update the 1337 blockchain snapshot? Myallet stuck after 15 march and i can not stake :) Make Sure you updated your 1337 Wallet Version to v1.7.0.0-g New Snapshot is Up to 3-24-2017. :) 8) Thank you! :D Title: Re: MINTCOIN BLOCKCHAIN SNAPSHOT (The Fastest Way to Sync a Wallet) Post by: kiklo on March 27, 2017, 04:29:25 AM MINTCOIN BLOCKCHAIN SNAPSHOT (The Fastest Way to Sync) Wallet Version Ver 2.0.2.0 used with this SnapShot. my mega is only free account.. file is too large.. is thier anyway to download snapshots? thanks Free accounts on Mega are 50 Gig, more than enough, however if your account is full, just download by doubleclicking on the file and it should start downloading it, Don't close the web page until it says download complete, if you close the web page it will cancel the download. You may want to post in the Mint forum, and ask them for a recent bootstrap, this snapshot on my site is from last year , and I have tried updating it , but the wallet has so many orphans that updating was proving more time consuming that what I could dedicate to it. I have been waiting for them to release their new wallet , in hope that the orphan sync problem would be gone. :P Still waiting. 8) Title: Re: √ √ Kiklo's Premium Blockchain Snapshot Service √ √ Post by: Redni on April 03, 2017, 05:45:52 PM Eh, again POS wallet stuck on linux. 18 March – BitBean and Piggy... and 24 March – Zeit.
Please if you can upgrade BitBean and Zeit SnapShot :) I move all my coins to PoSWallet for staking. And maybe you have also Piggy SnapShot? :> Title: Re: √ √ Kiklo's Premium Blockchain Snapshot Service √ √ Post by: kiklo on April 04, 2017, 10:15:27 PM Eh, again POS wallet stuck on linux. 18 March – BitBean and Piggy... and 24 March – Zeit. Please if you can upgrade BitBean and Zeit SnapShot :) I move all my coins to PoSWallet for staking. And maybe you have also Piggy SnapShot? :> ZEIT Snapshot is less than 10 days old, you should be able to sync that in less than an hour or two. Bitbean is now updated to 4-04-2017. Sorry don't have any Piggy snapshots. 8) Title: Re: √ √ Kiklo's Premium Blockchain Snapshot Service √ √ Post by: kiklo on May 09, 2017, 07:07:34 AM Lauda has Defamed my Good Name, Theymos has been too cowardly to respond about fixing his bullshit broken trust system.
Title: Re: √ √ Kiklo's Premium Blockchain Snapshot Service √ √ Post by: kiklo on June 17, 2017, 07:35:48 AM Due to Lauda hitting me with False Negative Trust Ratings, and the fact Theymos continues to allow her to abuse others Trust ratings at her whim. I expressed my considerable displeasure at such incompetence by the BTCTalk Admin/Theymos his staff and Lauda.
To which my only real reply from them from a 30 day ban, where I was unable to update this snapshot service. So this entire forum has become unreliable , so my snapshot service is moving forever. This Snapshot service have moved, because of the btctalk's broken trust system Go to https://www.cryptopia.co.nz/Forum/Thread/1349 for the updated Service. For any that care, under the reputation forum you can see what kind of person Lauda is, and how flacid Theymos is by ignoring her. https://bitcointalk.org/index.php?board=129.0 Lauda and hilariousandco -> Proven to Abuse Trust (Corrupt + Poisonous) https://bitcointalk.org/index.php?topic=1951543.0 I am being given neg feedback for political reasons https://bitcointalk.org/index.php?topic=1960244.0 8) |
