kiklo (OP)
Legendary
Offline
Activity: 1092
Merit: 1000
|
|
July 02, 2016, 07:51:47 AM Last edit: June 17, 2017, 07:17:24 AM by kiklo |
|
This Snapshot service have moved, because of the btctalk's broken trust system
Go to https://www.cryptopia.co.nz/Forum/Thread/1349 for the updated Service. BLACKCOIN BLOCKCHAIN SNAPSHOT (The Fastest Way to Sync) Wallet Version Ver 1.2.4 used with this SnapShot. _______________________________________________________________________________ _____________________ You will need a program that can uncompress rar files, example: http://rarlabs.com/download.htmFilename: BlackcoinBlockChainSnapShot-(Date Created).rar Download : https://mega.nz/#F!DBxjDbgC!3Um0nxoE4QZlJ8Co_-EDsgNEW Wallet: Install Instructions Make a BlackCoin folder under C:\Users\"username"\AppData\Roaming\ Then Extract and copy the files from BlackcoinBlockchainSnapShot.rar into C:\Users\"username"\AppData\Roaming\BlackCoin Then open Blackcoin and it will start syncing the BlockChain from the last snapshot. ACTIVE Wallet:Install Instructions , (Be sure to have a backup of your Wallet.dat 1st)Make sure Blackcoin is closed Go under c:\Users\"username"\AppData\Roaming\BlackCoin (for Windows) or in the BlackCoin data folder for other OSes Then Delete 4 files : .lock & blk0001.dat & db.log & debug.log Then Delete 2 folders named : database & txleveldb Then Extract and copy the files from BlackcoinBlockchainSnapshot into C:\Users\"username"\AppData\Roaming\BlackCoin Then open Blackcoin and it will start syncing the BlockChain from the last snapshot. Once your Blackcoin Wallet is completely Synced. Check your Balance, if the Balance is incorrect. Click on Help, click Debug Window, click Console, type in repairwallet and hit enter, then check your Balance If Balance is still not correct. Then From a Command Prompt run Blackcoin-qt.exe -rescan will take a little while but should correct your balance info.List of AddNodeshttps://chainz.cryptoid.info/blk/#!networkPremium Service Status => INACTIVE = SnapShot & BootStrap Updated ~5 MonthsClick Here to See a List of All Available SnapShots.
|
|
|
|
|
|
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction.
|
|
|
|
kiklo (OP)
Legendary
Offline
Activity: 1092
Merit: 1000
|
|
July 03, 2016, 07:02:51 AM Last edit: June 17, 2017, 07:17:48 AM by kiklo |
|
This Snapshot service have moved, because of the btctalk's broken trust system
Go to https://www.cryptopia.co.nz/Forum/Thread/1349 for the updated Service. BOTTLECAPS BLOCKCHAIN SNAPSHOT (The Fastest Way to Sync) Wallet Version Ver 2.2.2.0-g418187240-Caps2.0 used with this SnapShot. _______________________________________________________________________________ _____________________ You will need a program that can uncompress rar files, example: http://rarlabs.com/download.htmFilename: BottlecapsBlockChainSnapShot- (Date Created).rar Download : https://mega.nz/#F!DBxjDbgC!3Um0nxoE4QZlJ8Co_-EDsgNEW Wallet: Install Instructions Make a BottleCaps folder under C:\Users\"username"\AppData\Roaming\ Then Extract and copy the files from BottlecapsBlockchainSnapShot.rar into C:\Users\"username"\AppData\Roaming\BottleCaps Then open BottleCaps and it will start syncing the BlockChain from the last snapshot. ACTIVE Wallet:Install Instructions , (Be sure to have a backup of your Wallet.dat 1st)Make sure Bottlecaps is closed Go under c:\Users\"username"\AppData\Roaming\BottleCaps (for Windows) or in the BottleCaps data folder for other OSes Then Delete 5 files : .lock & blk0001.dat & blkindex.dat & debug.log & db.log Then Delete 1 folder named : database Then Extract and copy the files from BottlecapsBlockchainSnapshot into C:\Users\"username"\AppData\Roaming\BottleCaps\ Then open Bottlecaps and it will start syncing the BlockChain from the last snapshot. Once your BottleCaps Wallet is completely Synced. Check your Balance, if the Balance is incorrect. Click on Help, click Debug Window, click Console, type in repairwallet and hit enter, then check your Balance If Balance is still not correct. Then From a Command Prompt run Bottlecaps-qt.exe -rescan will take a little while but should correct your balance info.List of AddNodeshttp://www.presstab.pw/phpexplorer/CAP/nodes.phpPremium Service Status => INACTIVE = SnapShot & BootStrap Updated ~5 MonthsClick Here to See a List of All Available SnapShots.
|
|
|
|
kiklo (OP)
Legendary
Offline
Activity: 1092
Merit: 1000
|
|
July 17, 2016, 11:04:16 AM Last edit: June 17, 2017, 07:18:16 AM by kiklo |
|
This Snapshot service have moved, because of the btctalk's broken trust system
Go to https://www.cryptopia.co.nz/Forum/Thread/1349 for the updated Service. SATIVACOIN BLOCKCHAIN SNAPSHOT (The Fastest Way to Sync) Wallet Version v1.3.0.0 used with this SnapShot. _______________________________________________________________________________ _____________________ You will need a program that can uncompress rar files, example: http://rarlabs.com/download.htmFilename: SativacoinBlockchainSnapshot-2017-4-24.rar SHA-256: D0B1EC5D49D55D98DDD94C5D18E1D8A3984130E9BC4636A4C5CCC73581618DA5 Direct Link : https://mega.nz/#!jUIBWLSK!ME2ZgcjsnyOcQbyY1mGi3cESIYF6PeVHFjTlbH6f3fUGeneral Link: https://mega.nz/#F!DBxjDbgC!3Um0nxoE4QZlJ8Co_-EDsghttp://onlinemd5.com can be used to verify the above SHA-256 checksums. NEW Wallet: Install Instructions Make a Sativacoin folder under C:\Users\"username"\AppData\Roaming\ Then Extract and copy the files from SativacoinBlockchainSnapShot.rar into C:\Users\"username"\AppData\Roaming\sativacoin Then open Sativacoin and it will start syncing the BlockChain from the last snapshot. ACTIVE Wallet:Install Instructions , (Be sure to have a backup of your Wallet.dat 1st)Make sure Sativacoin is closed Go under c:\Users\"username"\AppData\Roaming\Sativacoin (for Windows) or in the Sativacoin data folder for other OSes Then Delete 4 files : .lock & blk0001.dat & db.log & debug.log Then Delete 2 folders named : database & txleveldb Then Extract and copy the files from SativacoinBlockchainSnapshot into C:\Users\"username"\AppData\Roaming\sativacoin Then open Sativacoin and it will start syncing the BlockChain from the last snapshot. Once your Sativacoin Wallet is completely Synced. Check your Balance, if the Balance is incorrect. Click on Help, click Debug Window, click Console, type in repairwallet and hit enter, then check your Balance If Balance is still not correct. Then From a Command Prompt run Sativacoin-qt.exe -rescan will take a little while but should correct your balance info. List of AddNodeshttps://www.cryptopia.co.nz/BlockExplorer?coin=STVPremium Service Status => Active = SnapShot & BootStrap Updated Every 2 WeeksZEIT Address => MZYR3sPeVJPRbPfLoVyhjUMbcJxGhcajVD Click Here to See a List of All Available SnapShots.
|
|
|
|
fikihafana
|
|
July 17, 2016, 02:28:25 PM |
|
Do you have tekcoin snapshot & bootstrap, i need 2 days to sync and it's still syncing until now
|
|
|
|
kiklo (OP)
Legendary
Offline
Activity: 1092
Merit: 1000
|
|
July 18, 2016, 12:15:49 AM Last edit: July 18, 2016, 07:50:02 AM by kiklo |
|
Do you have tekcoin snapshot & bootstrap, i need 2 days to sync and it's still syncing until now
If you look at the OP, 1st Post lists all of the coins available https://bitcointalk.org/index.php?topic=1378653.msg14024451#msg14024451The Last one for Tek was from 5-24-2016, they are not paying for the premium service which is updated every 2 weeks so their updates are ~ 2 months. However since I know you need one, check back in a few hours, I will do a up to date sync. Update : Tek Synced to 7-18-2016 , Bootstrap & SnapShot are Updated Snapshot is Fastest way , Bootstrap can take a day or two Direct Link to Tek SnapShot Post https://bitcointalk.org/index.php?topic=1378653.msg14309285#msg14309285FYI: the 1st Post of this topic is always updated to show the coins available and links to their snapshops or bootstraps.
|
|
|
|
kiklo (OP)
Legendary
Offline
Activity: 1092
Merit: 1000
|
|
July 23, 2016, 12:23:49 AM Last edit: June 17, 2017, 07:18:45 AM by kiklo |
|
This Snapshot service have moved, because of the btctalk's broken trust system
Go to https://www.cryptopia.co.nz/Forum/Thread/1349 for the updated Service. TRUCKCOIN BLOCKCHAIN SNAPSHOT (The Fastest Way to Sync) Wallet Version Ver 1.0.0.0 used with this SnapShot. _______________________________________________________________________________ _____________________ You will need a program that can uncompress rar files, example: http://rarlabs.com/download.htmFilename: TruckcoinBlockChainSnapShot- (Date Created).rar Download : https://mega.nz/#F!DBxjDbgC!3Um0nxoE4QZlJ8Co_-EDsgNEW Wallet: Install Instructions Make a Truckcoin folder under C:\Users\"username"\AppData\Roaming\ Then Extract and copy the files from TruckcoinBlockchainSnapShot.rar into C:\Users\"username"\AppData\Roaming\Truckcoin Then open Truckcoin and it will start syncing the BlockChain from the last snapshot. ACTIVE Wallet:Install Instructions , (Be sure to have a backup of your Wallet.dat 1st)Make sure Truckcoin is closed Go under c:\Users\"username"\AppData\Roaming\Truckcoin (for Windows) or in the Truckcoin data folder for other OSes Then Delete 5 files : .lock & blk0001.dat & blkindex.dat & debug.log & db.log Then Delete 1 folder named : database Then Extract and copy the files from TruckcoinBlockchainSnapshot into C:\Users\"username"\AppData\Roaming\Truckcoin Then open Truckcoin and it will start syncing the BlockChain from the last snapshot. Once your Truckcoin Wallet is completely Synced. Check your Balance, if the Balance is incorrect. Click on Help, click Debug Window, click Console, type in repairwallet and hit enter, then check your Balance If Balance is still not correct. Then From a Command Prompt run Truckcoin-qt.exe -rescan will take a little while but should correct your balance info.List of AddNodeshttp://www.presstab.pw/phpexplorer/TRK/nodes.phpPremium Service Status => INACTIVE = SnapShot & BootStrap Updated ~5 MonthsClick Here to See a List of All Available SnapShots.
|
|
|
|
kiklo (OP)
Legendary
Offline
Activity: 1092
Merit: 1000
|
|
July 23, 2016, 06:47:34 PM Last edit: June 17, 2017, 07:19:15 AM by kiklo |
|
This Snapshot service have moved, because of the btctalk's broken trust system
Go to https://www.cryptopia.co.nz/Forum/Thread/1349 for the updated Service. PHILOSOPHERSTONE BLOCKCHAIN SNAPSHOT (The Fastest Way to Sync) Wallet Version V 1.6.5.0-gx used with this Snapshot _______________________________________________________________________________ ____ You will need a program that can uncompress rar files, example: http://rarlabs.com/download.htmFilename: PhilosopherstoneBlockChainSnapShot- (Date Created).rar Download: https://mega.nz/#F!DBxjDbgC!3Um0nxoE4QZlJ8Co_-EDsgNEW Wallet: Install Instructions Make a Philosopherstone folder under C:\Users\"username"\AppData\Roaming\ Then Extract and copy the files from PhilosopherstoneBlockchainSnapShot.rar into C:\Users\"username"\AppData\Roaming\Philosopherstone Then open Philosopherstone-qt64.exe and it will start syncing the BlockChain from the last snapshot. ACTIVE Wallet:Install Instructions , (Be sure to have a backup of your Wallet.dat 1st)Make sure Philosopherstone is closed Go under c:\Users\"username"\AppData\Roaming\Philosopherstone (for Windows) or in the Philosopherstone data folder for other OSes Then Delete 5 files : .lock & blk0001.dat & blk0002 & db.log & debug.log Then Delete 2 folders named : database & txleveldb Then Extract and copy the files from PhilosopherstoneBlockchainSnapshot into C:\Users\"username"\AppData\Roaming\Philosopherstone Then open Philosopherstone and it will start syncing the BlockChain from the last snapshot. Once your Philosopherstone Wallet is completely Synced. Check your Balance, if the Balance is incorrect. Click on Help, click Debug Window, click Console, type in repairwallet and hit enter, then check your Balance If Balance is still not correct. Then From a Command Prompt run Philosopherstone-qt64.exe -rescan will take a little while but should correct your balance info.List of AddNodeshttps://www.cryptopia.co.nz/BlockExplorer?coin=PHSPremium Service Status => INACTIVE = SnapShot & BootStrap Updated ~5 MonthsClick Here to See a List of All Available SnapShots.
|
|
|
|
kiklo (OP)
Legendary
Offline
Activity: 1092
Merit: 1000
|
|
July 26, 2016, 07:48:32 PM Last edit: June 17, 2017, 07:19:42 AM by kiklo |
|
This Snapshot service have moved, because of the btctalk's broken trust system
Go to https://www.cryptopia.co.nz/Forum/Thread/1349 for the updated Service. PANDACOIN BLOCKCHAIN SNAPSHOT (The Fastest Way to Sync) Wallet Version 3.0.2 used with this Snapshot _______________________________________________________________________________ ____ You will need a program that can uncompress rar files, example: http://rarlabs.com/download.htmFilename: PandacoinBlockChainSnapShot-2017-4-26.rar SHA-256: 27CBD88086E0CB49508FFBE1753D02D410B1CEE9EA9BB84D84E9C4EF371CEF8C Direct Link : https://mega.nz/#!Cd5FRK6Y!a3FmFlKmxGdv0t6xRNEvl083rzcIU_NEMXBPp07suWAGeneral Link: https://mega.nz/#F!DBxjDbgC!3Um0nxoE4QZlJ8Co_-EDsghttp://onlinemd5.com can be used to verify the above SHA-256 checksums. NEW Wallet: Install Instructions Make a Pandacoin folder under C:\Users\"username"\AppData\Roaming\ Then Extract and copy the files from PandacoinBlockchainSnapShot.rar into C:\Users\"username"\AppData\Roaming\Pandacoin Then open Pandacoin-qt.exe and it will start syncing the BlockChain from the last snapshot. ACTIVE Wallet:Install Instructions , (Be sure to have a backup of your Wallet.dat 1st)Make sure Pandacoin is closed Go under c:\Users\"username"\AppData\Roaming\Pandacoin (for Windows) or in the Pandacoin data folder for other OSes Then Delete 5 files : .lock & blk0001.dat & blk0002 & db.log & debug.log Then Delete 2 folders named : database & txleveldb Then Extract and copy the files from PandacoinBlockchainSnapshot into C:\Users\"username"\AppData\Roaming\Pandacoin Then open Pandacoin and it will start syncing the BlockChain from the last snapshot. Once your Pandacoin Wallet is completely Synced. Check your Balance, if the Balance is incorrect. Click on Help, click Debug Window, click Console, type in repairwallet and hit enter, then check your Balance If Balance is still not correct. Then From a Command Prompt run Pandacoin-qt -rescan will take a little while but should correct your balance info.List of AddNodeshttps://chainz.cryptoid.info/pnd/#!networkPremium Service Status => Active = SnapShot & BootStrap Updated Every 2 WeeksZEIT Address => MYD6NvCFBhUrCKSA97dCUo4Dpprk1h7Lvz Click Here to See a List of All Available SnapShots.
|
|
|
|
kiklo (OP)
Legendary
Offline
Activity: 1092
Merit: 1000
|
|
July 27, 2016, 06:27:45 AM Last edit: June 17, 2017, 07:20:08 AM by kiklo |
|
This Snapshot service have moved, because of the btctalk's broken trust system
Go to https://www.cryptopia.co.nz/Forum/Thread/1349 for the updated Service. NETCOIN BLOCKCHAIN SNAPSHOT (The Fastest Way to Sync) Wallet Version Ver 2.5.0.0 used with this SnapShot. _______________________________________________________________________________ _____________________ You will need a program that can uncompress rar files, example: http://rarlabs.com/download.htmFilename: NetcoinBlockChainSnapShot- (Date Created).rar Download : https://mega.nz/#F!DBxjDbgC!3Um0nxoE4QZlJ8Co_-EDsgNEW Wallet: Install Instructions Make a Netcoin folder under C:\Users\"username"\AppData\Roaming\ Then Extract and copy the files from NetcoinBlockchainSnapShot.rar into C:\Users\"username"\AppData\Roaming\Netcoin Then open Netcoin and it will start syncing the BlockChain from the last snapshot. ACTIVE Wallet:Install Instructions , (Be sure to have a backup of your Wallet.dat 1st)Make sure Netcoin is closed Go under c:\Users\"username"\AppData\Roaming\Netcoin (for Windows) or in the Netcoin data folder for other OSes Then Delete 5 files : .lock & blk0001.dat & blkindex.dat & debug.log & db.log Then Delete 2 folders named : database txleveldb Then Extract and copy the files from NetcoinBlockchainSnapshot into C:\Users\"username"\AppData\Roaming\Netcoin Then open Netcoin and it will start syncing the BlockChain from the last snapshot. Once your Netcoin Wallet is completely Synced. Check your Balance, if the Balance is incorrect. Click on Help, click Debug Window, click Console, type in repairwallet and hit enter, then check your Balance If Balance is still not correct. Then From a Command Prompt run Netcoin-qt.exe -rescan will take a little while but should correct your balance info.List of AddNodeshttps://www.cryptopia.co.nz/BlockExplorer?coin=NETPremium Service Status => INACTIVE = SnapShot & BootStrap Updated ~5 MonthsClick Here to See a List of All Available SnapShots.
|
|
|
|
kiklo (OP)
Legendary
Offline
Activity: 1092
Merit: 1000
|
|
July 28, 2016, 08:03:11 AM Last edit: June 17, 2017, 07:20:36 AM by kiklo |
|
This Snapshot service have moved, because of the btctalk's broken trust system
Go to https://www.cryptopia.co.nz/Forum/Thread/1349 for the updated Service. 1337 BLOCKCHAIN SNAPSHOT (The Fastest Way to Sync) Wallet Version v1.7.0.0-g used with this Snapshot _______________________________________________________________________________ ____ You will need a program that can uncompress rar files, example: http://rarlabs.com/download.htmFilename: 1337BlockChainSnapShot- (Date Created).rar Download: https://mega.nz/#F!DBxjDbgC!3Um0nxoE4QZlJ8Co_-EDsgNEW Wallet: Install Instructions Make a 1337 folder under C:\Users\"username"\AppData\Roaming\ Then Extract and copy the files from 1337BlockchainSnapShot.rar into C:\Users\"username"\AppData\Roaming\1337 Then open 1337-qt.exe and it will start syncing the BlockChain from the last snapshot. ACTIVE Wallet:Install Instructions , (Be sure to have a backup of your Wallet.dat 1st)Make sure 1337 is closed Go under c:\Users\"username"\AppData\Roaming\1337 (for Windows) or in the 1337 data folder for other OSes Then Delete 5 files : .lock & blk0001.dat & blk0002 & db.log & debug.log Then Delete 2 folders named : database & txleveldb Then Extract and copy the files from 1337BlockchainSnapshot into C:\Users\"username"\AppData\Roaming\1337 Then open 1337 and it will start syncing the BlockChain from the last snapshot. Once your 1337 Wallet is completely Synced. Check your Balance, if the Balance is incorrect. Click on Help, click Debug Window, click Console, type in repairwallet and hit enter, then check your Balance If Balance is still not correct. Then From a Command Prompt run 1337-qt.exe -rescan will take a little while but should correct your balance info.List of AddNodeshttp://chain.blockpioneers.info/1337/nodes.phpPremium Service Status => INACTIVE = SnapShot & BootStrap Updated ~5 MonthsClick Here to See a List of All Available SnapShots.
|
|
|
|
kiklo (OP)
Legendary
Offline
Activity: 1092
Merit: 1000
|
|
August 03, 2016, 05:46:34 AM Last edit: June 17, 2017, 07:21:06 AM by kiklo |
|
This Snapshot service have moved, because of the btctalk's broken trust system
Go to https://www.cryptopia.co.nz/Forum/Thread/1349 for the updated Service. EVERGREENCOIN BLOCKCHAIN SNAPSHOT (The Fastest Way to Sync) Wallet Version Ver 1.6.0.1 used with this SnapShot. _______________________________________________________________________________ _____________________ You will need a program that can uncompress rar files, example: http://rarlabs.com/download.htmFilename: EverGreencoinBlockChainSnapShot- (Date Created).rar Download : https://mega.nz/#F!DBxjDbgC!3Um0nxoE4QZlJ8Co_-EDsgNEW Wallet: Install Instructions Make a EverGreenCoin folder under C:\Users\"username"\AppData\Roaming\ Then Extract and copy the files from EverGreencoinBlockchainSnapShot.rar into C:\Users\"username"\AppData\Roaming\EverGreenCoin Then open EverGreenCoin and it will start syncing the BlockChain from the last snapshot. ACTIVE Wallet:Install Instructions , (Be sure to have a backup of your Wallet.dat 1st)Make sure EverGreenCoin is closed Go under c:\Users\"username"\AppData\Roaming\EverGreenCoin (for Windows) or in the EverGreenCoin data folder for other OSes Then Delete 4 files : .lock & blk0001.dat & db.log & debug.log Then Delete 2 folders named : database & txleveldb Then Extract and copy the files from EverGreencoinBlockchainSnapshot into C:\Users\"username"\AppData\Roaming\EverGreenCoin Then open EverGreenCoin and it will start syncing the BlockChain from the last snapshot. Once your EverGreenCoin Wallet is completely Synced. Check your Balance, if the Balance is incorrect. Click on Help, click Debug Window, click Console, type in repairwallet and hit enter, then check your Balance If Balance is still not correct. Then From a Command Prompt run EverGreenCoin-qt.exe -rescan will take a little while but should correct your balance info.List of Seed Nodesseed.evergreencoin.org DDoS protected seed2.evergreencoin.org egc-seed1.granitecoin.com egc-seed2.granitecoin.com egc-seed3.granitecoin.com egc-seed4.granitecoin.com egc-seed5.granitecoin.com Premium Service Status => INACTIVE = SnapShot & BootStrap Updated ~5 MonthsClick Here to See a List of All Available SnapShots.
|
|
|
|
EverGreenCoin
Legendary
Offline
Activity: 2170
Merit: 1192
EverGreenCoin® (EGC) EverGreenCoin.org
|
|
August 03, 2016, 06:51:53 AM |
|
EVERGREENCOIN BLOCKCHAIN SNAPSHOT (The Fastest Way to Sync) Wallet Version Ver 1.3 used with this SnapShot. _______________________________________________________________________________ _____________________ You will need a program that can uncompress rar files, example: http://rarlabs.com/download.htmFilename: EverGreencoinBlockChainSnapShot- (Date Created).rar Download : https://mega.nz/#F!DBxjDbgC!3Um0nxoE4QZlJ8Co_-EDsgNEW Wallet: Install Instructions Make a EverGreenCoin folder under C:\Users\"username"\AppData\Roaming\ Then Extract and copy the files from EverGreencoinBlockchainSnapShot.rar into C:\Users\"username"\AppData\Roaming\EverGreenCoin Then open EverGreenCoin and it will start syncing the BlockChain from the last snapshot. ACTIVE Wallet:Install Instructions , (Be sure to have a backup of your Wallet.dat 1st)Make sure EverGreenCoin is closed Go under c:\Users\"username"\AppData\Roaming\EverGreenCoin (for Windows) or in the EverGreenCoin data folder for other OSes Then Delete 4 files : .lock & blk0001.dat & db.log & debug.log Then Delete 2 folders named : database & txleveldb Then Extract and copy the files from EverGreencoinBlockchainSnapshot into C:\Users\"username"\AppData\Roaming\EverGreenCoin Then open EverGreenCoin and it will start syncing the BlockChain from the last snapshot. Once your EverGreenCoin Wallet is completely Synced. Check your Balance, if the Balance is incorrect. Click on Help, click Debug Window, click Console, type in repairwallet and hit enter, then check your Balance If Balance is still not correct. Then From a Command Prompt run EverGreenCoin-qt.exe -rescan will take a little while but should correct your balance info.List of Seed Nodesseed.evergreencoin.org DDoS protected seed2.evergreencoin.org egc-seed1.granitecoin.com egc-seed2.granitecoin.com egc-seed3.granitecoin.com egc-seed4.granitecoin.com egc-seed5.granitecoin.com Premium Service Status => INACTIVE = SnapShot & BootStrap Updated ~2 Months Many thanks!
|
Cryptocurrency meets environment
| █ █ █ █ | | █ █ █ █ |
|
|
|
|
kiklo (OP)
Legendary
Offline
Activity: 1092
Merit: 1000
|
|
August 04, 2016, 08:44:05 AM Last edit: June 17, 2017, 07:21:34 AM by kiklo |
|
This Snapshot service have moved, because of the btctalk's broken trust system
Go to https://www.cryptopia.co.nz/Forum/Thread/1349 for the updated Service. E-CurrencyCoin BLOCKCHAIN SNAPSHOT (The Fastest Way to Sync) Wallet Version 2.4.7.5 used with this SnapShot. _______________________________________________________________________________ _____________________ You will need a program that can uncompress rar files, example: http://rarlabs.com/download.htmFilename: E-CurrencyCoinBlockChainSnapShot- (Date Created).rar Download : https://mega.nz/#F!DBxjDbgC!3Um0nxoE4QZlJ8Co_-EDsgNEW Wallet: Install Instructions Make a ECCoin folder under C:\Users\"username"\AppData\Roaming\ Then Extract and copy the files from E-CurrencyCoinBlockchainSnapShot.rar into C:\Users\"username"\AppData\Roaming\ECCoin Then open E-CurrencyCoin and it will start syncing the BlockChain from the last snapshot. ACTIVE Wallet:Install Instructions , (Be sure to have a backup of your Wallet.dat 1st)Make sure E-CurrencyCoin is closed Go under c:\Users\"username"\AppData\Roaming\ECCoin (for Windows) or in the E-CurrencyCoin data folder for other OSes Then Delete 4 files : .lock & blk0001.dat & db.log & debug.log Then Delete 2 folders named : database & txleveldb Then Extract and copy the files from E-CurrencyCoinBlockchainSnapshot into C:\Users\"username"\AppData\Roaming\ECCoin Then open E-CurrencyCoin and it will start syncing the BlockChain from the last snapshot. Once your E-CurrencyCoin Wallet is completely Synced. Check your Balance, if the Balance is incorrect. Click on Help, click Debug Window, click Console, type in repairwallet and hit enter, then check your Balance If Balance is still not correct. Then From a Command Prompt run ECCoin-qt.exe -rescan will take a little while but should correct your balance info.Premium Service Status => INACTIVE = SnapShot & BootStrap Updated ~5 MonthsClick Here to See a List of All Available SnapShots.
|
|
|
|
kiklo (OP)
Legendary
Offline
Activity: 1092
Merit: 1000
|
|
August 06, 2016, 03:34:06 AM Last edit: June 17, 2017, 07:22:04 AM by kiklo |
|
This Snapshot service have moved, because of the btctalk's broken trust system
Go to https://www.cryptopia.co.nz/Forum/Thread/1349 for the updated Service. DIAMOND BLOCKCHAIN SNAPSHOT (The Fastest Way to Sync) Wallet Version Ver 2.1.0.4 used with this SnapShot. _______________________________________________________________________________ _____________________ You will need a program that can uncompress rar files, example: http://rarlabs.com/download.htmFilename: DiamondBlockChainSnapShot- (Date Created).rar Download : https://mega.nz/#F!DBxjDbgC!3Um0nxoE4QZlJ8Co_-EDsgNEW Wallet: Install Instructions Make a Diamond folder under C:\Users\"username"\AppData\Roaming\ Then Extract and copy the files from DiamondBlockchainSnapShot.rar into C:\Users\"username"\AppData\Roaming\Diamond Then open Diamond and it will start syncing the BlockChain from the last snapshot. ACTIVE Wallet:Install Instructions , (Be sure to have a backup of your Wallet.dat 1st)Make sure Diamond is closed Go under c:\Users\"username"\AppData\Roaming\Diamond (for Windows) or in the Diamond data folder for other OSes Then Delete 5 files : .lock & blk0001.dat & blkindex.dat & debug.log & db.log Then Delete 1 folder named : database Then Extract and copy the files from DiamondBlockchainSnapshot into C:\Users\"username"\AppData\Roaming\Diamond Then open Diamond and it will start syncing the BlockChain from the last snapshot. Once your Diamond Wallet is completely Synced. Check your Balance, if the Balance is incorrect. Click on Help, click Debug Window, click Console, type in repairwallet and hit enter, then check your Balance If Balance is still not correct. Then From a Command Prompt run Diamond-qt-2104.exe -rescan will take a little while but should correct your balance info.List of AddNodeshttps://chainz.cryptoid.info/dmd/#!networkPremium Service Status => INACTIVE = SnapShot & BootStrap Updated ~5 MonthsClick Here to See a List of All Available SnapShots.
|
|
|
|
kiklo (OP)
Legendary
Offline
Activity: 1092
Merit: 1000
|
|
August 20, 2016, 10:45:08 PM Last edit: June 17, 2017, 07:22:31 AM by kiklo |
|
This Snapshot service have moved, because of the btctalk's broken trust system
Go to https://www.cryptopia.co.nz/Forum/Thread/1349 for the updated Service. 808 BLOCKCHAIN SNAPSHOT (The Fastest Way to Sync) Wallet Version Ver 0.1.22-gd0cbc83 used with this SnapShot. _______________________________________________________________________________ _____________________ You will need a program that can uncompress rar files, example: http://rarlabs.com/download.htmFilename: 808-BlockChainSnapShot- (Date Created).rar Download : https://mega.nz/#F!DBxjDbgC!3Um0nxoE4QZlJ8Co_-EDsgNEW Wallet: Install Instructions Make a 808 folder under C:\Users\"username"\AppData\Roaming\ Then Extract and copy the files from 808-BlockchainSnapShot.rar into C:\Users\"username"\AppData\Roaming\808 Then open 808 and it will start syncing the BlockChain from the last snapshot. ACTIVE Wallet:Install Instructions , (Be sure to have a backup of your Wallet.dat 1st)Make sure 808 is closed Go under c:\Users\"username"\AppData\Roaming\808 (for Windows) or in the 808 data folder for other OSes Then Delete 6 files : .lock & blk0001.dat & blkindex.dat & debug.log & db.log & addr.dat Then Delete 1 folder named : database Then Extract and copy the files from 808-BlockchainSnapshot into C:\Users\"username"\AppData\Roaming\808\ Then open 808 and it will start syncing the BlockChain from the last snapshot. Once your 808 Wallet is completely Synced. Check your Balance, if the Balance is incorrect. Click on Help, click Debug Window, click Console, type in repairwallet and hit enter, then check your Balance If Balance is still not correct. Then From a Command Prompt run 808.exe -rescan will take a little while but should correct your balance info.List of AddNodeshttps://www.cryptopia.co.nz/BlockExplorer?coin=808Premium Service Status => INACTIVE = SnapShot & BootStrap Updated ~5 MonthsClick Here to See a List of All Available SnapShots.
|
|
|
|
Tubularwindow
Newbie
Offline
Activity: 25
Merit: 0
|
|
August 24, 2016, 04:10:31 AM |
|
MINTCOIN BLOCKCHAIN SNAPSHOT (The Fastest Way to Sync) Wallet Version Ver 2.0.2.0 used with this SnapShot. _______________________________________________________________________________ ____ You will need a program that can uncompress rar files, example: http://rarlabs.com/download.htmFilename : MintcoinBlockChainSnapShot- (Date Created).rar Download: https://mega.nz/#F!DBxjDbgC!3Um0nxoE4QZlJ8Co_-EDsg* File is over 1 Gig , Download with MegaSync *NEW Wallet: Install Instructions Make a Mintcoin folder under C:\Users\"username"\AppData\Roaming\ Then Extract and copy the files from MintcoinBlockchainSnapShot.rar into C:\Users\"username"\AppData\Roaming\Mintcoin Then open Mintcoin and it will start syncing the BlockChain from the last snapshot. ACTIVE Wallet:Install Instructions , (Be sure to have a backup of your Wallet.dat 1st)Make sure Mintcoin is closed Go under c:\Users\"username"\AppData\Roaming\Mintcoin (for Windows) or in the Mintcoin data folder for other OSes Then Delete 4 files : .lock & blk0001.dat & db.log & debug.log Then Delete 2 folders named : database & txleveldb Then Extract and copy the files from MintcoinBlockchainSnapshot into C:\Users\"username"\AppData\Roaming\Mintcoin Then open Mintcoin and it will start syncing the BlockChain from the last snapshot. Once your Mint Wallet is completely Synced. Check your Balance, if the Balance is incorrect. Click on Help, click Debug Window, click Console, type in repairwallet and hit enter, then check your Balance If Balance is still not correct. Then From a Command Prompt run mintcoin-qt.exe -rescan will take a little while but should correct your balance info.List of Addnodes:https://www.cryptopia.co.nz/BlockExplorer?coin=MINTClick Here to See a List of All Available SnapShots. Hi. I'm still learning about these. What exactly is the difference between a Bootstrap vs a Snapshot? What are the pros and cons of each? Sorry if this is explained already. BTW thanks for doing this.
|
|
|
|
kiklo (OP)
Legendary
Offline
Activity: 1092
Merit: 1000
|
|
August 24, 2016, 07:37:46 AM Last edit: September 01, 2016, 09:19:48 PM by kiklo |
|
Hi. I'm still learning about these. What exactly is the difference between a Bootstrap vs a Snapshot? What are the pros and cons of each? Sorry if this is explained already. BTW thanks for doing this.
A bootstrap.dat file allows a new wallet (not synced) to rapidly import the initial blocks from a local file instead of slowly downloading blocks from random peers across the internet. Since you are pulling the blocks from your hard drive it is much faster than using the internet. However when importing blocks the wallet does have to verify every block, which means a 2 or 3 year old chain can take a few days to import and tie up your memory & processor while verifying the blocks. A Snapshot is a copy of the entire Wallet Database at the time the snapshot was made, it will already include any database directories & all database files. It can be downloaded from the internet and it will start syncing from where it was created, without having to re verify and recreate the other database files & directories. If you download & install a snapshot only created a day or so ago, after installing the snapshot it will be less than 1 hour before your wallet is synced and running. Pros: Snapshot will always be faster, as no re-verification of blocks is done. Bootstrap will always be a smaller download, since it does not include all of the database files, just the one needed for the bootstrap.dat . Cons: Snapshots will always be a Bigger Download. Bootstraps will always take more time to re-verify the blocks and tie up your PC.
|
|
|
|
warbird023
Jr. Member
Offline
Activity: 50
Merit: 1
|
|
September 03, 2016, 11:20:24 PM |
|
Hello, is the Snapshot usable with zeitcoind ? (The Commandline Version) I tried it, but after 1 Day it seems to be stuck at 500 Blocks
|
|
|
|
kiklo (OP)
Legendary
Offline
Activity: 1092
Merit: 1000
|
|
September 04, 2016, 06:33:41 AM Last edit: September 04, 2016, 07:08:55 PM by kiklo |
|
Hello, is the Snapshot usable with zeitcoind ? (The Commandline Version) I tried it, but after 1 Day it seems to be stuck at 500 Blocks
Hmm, Should be , check back in ~24 hours , and I will have an updated ZEIT snapshot to today's date. If that updated snapshot fails, you could use the updated bootstrap instead. (How much ram is in your system?) FYI:
|
|
|
|
warbird023
Jr. Member
Offline
Activity: 50
Merit: 1
|
|
September 04, 2016, 07:38:08 PM |
|
Hello, is the Snapshot usable with zeitcoind ? (The Commandline Version) I tried it, but after 1 Day it seems to be stuck at 500 Blocks
Hmm, Should be , check back in ~24 hours , and I will have an updated ZEIT snapshot to today's date. If that updated snapshot fails, you could use the updated bootstrap instead. (How much ram is in your system?) FYI: Today zeitcoind getinfo tells me that it has indexed 1500 Blocks. This seems to me a neverending Story. I stopped it and start it new with bootstrap.dat . By watching the content of debug.log it seems to be a slow but continous process. I will try this. The System ist a Rapsberry PI 3 with 1GB Ram.
|
|
|
|
|