Title: Wrong network and bad block! Post by: Hactive on March 31, 2016, 04:59:48 AM Hi guys,
I rescaned database for third time, which is pretty anoying as you can expect... But still I have this problem with Armory! I am hopeless. It has to be most secure wallet, but it is apparently so secure, I cant get my bitcoins :-(. This error pops up. -ERROR - 1458746456: (..\BDM_mainthread.cpp:429) BDM thread failed: Block file 'D:\EMěna\Bitcoin\blocks/blk00000.dat' is the wrong network! File: 00000000, expecting f9beb4d9 Can you help me please? Thanks Martin Title: Re: Wrong network and bad block! Post by: droark on March 31, 2016, 05:09:29 AM Your blockchain appears to be corrupted. You'll have to download it again.
Title: Re: Wrong network and bad block! Post by: goatpig on March 31, 2016, 09:26:48 AM Try 0.94
Use a Blocks path with only ASCII characters Ultimately, send me your blk00000.dat so I can look at it. Title: Re: Wrong network and bad block! Post by: Hactive on March 31, 2016, 07:37:24 PM Try 0.94 How and where should I send it? Can you give me email adress?Use a Blocks path with only ASCII characters Ultimately, send me your blk00000.dat so I can look at it. Title: Re: Wrong network and bad block! Post by: Hactive on March 31, 2016, 08:41:28 PM Try 0.94 How and where should I send it? Can you give me email adress?Use a Blocks path with only ASCII characters Ultimately, send me your blk00000.dat so I can look at it. Ok.. 0.94 now crashes after downloading last few blocks... Awesome... I have most secure wallet and my bitcoins are gone forever I guess.. Title: Re: Wrong network and bad block! Post by: goatpig on March 31, 2016, 08:46:07 PM How and where should I send it? Can you give me email adress? Upload it to some file sharing site and post the link here. Let's see a log file first though. Title: Re: Wrong network and bad block! Post by: achow101 on March 31, 2016, 08:47:50 PM Try 0.94 How and where should I send it? Can you give me email adress?Use a Blocks path with only ASCII characters Ultimately, send me your blk00000.dat so I can look at it. Ok.. 0.94 now crashes after downloading last few blocks... Awesome... I have most secure wallet and my bitcoins are gone forever I guess.. No your Bitcoins are not gone forever. They are only gone if you delete your wallet. Title: Re: Wrong network and bad block! Post by: Hactive on March 31, 2016, 09:28:26 PM Try 0.94 How and where should I send it? Can you give me email adress?Use a Blocks path with only ASCII characters Ultimately, send me your blk00000.dat so I can look at it. Ok.. 0.94 now crashes after downloading last few blocks... Awesome... I have most secure wallet and my bitcoins are gone forever I guess.. No your Bitcoins are not gone forever. They are only gone if you delete your wallet. I tried almsot everything, ok? I rebuild database like 3 times? Can you imagine how much patience and time it consumed? :) It's not just corrupt... I dont have ideas anymore... 2x factory reset of armory, 3x rebuilded and rescanned database. Uninstalled Bt core and armory like 5 times. Changing directories... I am exhausted. Title: Re: Wrong network and bad block! Post by: achow101 on March 31, 2016, 09:30:32 PM I tried almsot everything, ok? I rebuild database like 3 times? Can you imagine how much patience and time it consumed? :) It's not just corrupt... I dont have ideas anymore... 2x factory reset of armory, 3x rebuilded and rescanned database. Uninstalled Bt core and armory like 5 times. Changing directories... I am exhausted. No, you have not done everything nor have you done what I suggested. Rebuilding the database is not the same as resyncing. Rebuilding simply means that the data already on the disk is organized by the software so that it can use it. Resyncing means that you are downloading the data to the disk again. Resyncing will start it clean and remove corruption while rebuilding leaves the corruption there and that corruption causes problems.Title: Re: Wrong network and bad block! Post by: Hactive on March 31, 2016, 09:44:01 PM I tried almsot everything, ok? I rebuild database like 3 times? Can you imagine how much patience and time it consumed? :) It's not just corrupt... I dont have ideas anymore... 2x factory reset of armory, 3x rebuilded and rescanned database. Uninstalled Bt core and armory like 5 times. Changing directories... I am exhausted. No, you have not done everything nor have you done what I suggested. Rebuilding the database is not the same as resyncing. Rebuilding simply means that the data already on the disk is organized by the software so that it can use it. Resyncing means that you are downloading the data to the disk again. Resyncing will start it clean and remove corruption while rebuilding leaves the corruption there and that corruption causes problems.Title: Re: Wrong network and bad block! Post by: achow101 on March 31, 2016, 09:46:31 PM I tried almsot everything, ok? I rebuild database like 3 times? Can you imagine how much patience and time it consumed? :) It's not just corrupt... I dont have ideas anymore... 2x factory reset of armory, 3x rebuilded and rescanned database. Uninstalled Bt core and armory like 5 times. Changing directories... I am exhausted. No, you have not done everything nor have you done what I suggested. Rebuilding the database is not the same as resyncing. Rebuilding simply means that the data already on the disk is organized by the software so that it can use it. Resyncing means that you are downloading the data to the disk again. Resyncing will start it clean and remove corruption while rebuilding leaves the corruption there and that corruption causes problems.Title: Re: Wrong network and bad block! Post by: Hactive on April 01, 2016, 05:01:25 AM I tried almsot everything, ok? I rebuild database like 3 times? Can you imagine how much patience and time it consumed? :) It's not just corrupt... I dont have ideas anymore... 2x factory reset of armory, 3x rebuilded and rescanned database. Uninstalled Bt core and armory like 5 times. Changing directories... I am exhausted. No, you have not done everything nor have you done what I suggested. Rebuilding the database is not the same as resyncing. Rebuilding simply means that the data already on the disk is organized by the software so that it can use it. Resyncing means that you are downloading the data to the disk again. Resyncing will start it clean and remove corruption while rebuilding leaves the corruption there and that corruption causes problems.Title: Re: Wrong network and bad block! Post by: goatpig on April 01, 2016, 10:37:09 AM Let's see a log file first though. Title: Re: Wrong network and bad block! Post by: Hactive on April 06, 2016, 06:37:57 PM How and where should I send it? Can you give me email adress? Upload it to some file sharing site and post the link here. Let's see a log file first though. Title: Re: Wrong network and bad block! Post by: goatpig on April 06, 2016, 08:40:54 PM I need to see armorycpplog.txt too. Also, stop using non ASCII characters in your paths.
Title: Re: Wrong network and bad block! Post by: Hactive on April 08, 2016, 07:48:09 AM I need to see armorycpplog.txt too. Also, stop using non ASCII characters in your paths. I will send you this log too, when I'll be at home :]. Thank you so much. Title: Re: Wrong network and bad block! Post by: Hactive on April 11, 2016, 08:45:00 AM I need to see armorycpplog.txt too. Also, stop using non ASCII characters in your paths. I will send you this log too, when I'll be at home :]. Thank you so much. NOW HERE : http://s000.tinyupload.com/?file_id=65394661433771477843 (http://s000.tinyupload.com/?file_id=65394661433771477843) Title: Re: Wrong network and bad block! Post by: goatpig on April 11, 2016, 10:02:39 AM Quote File: D:\EMěna\Bitcoin\bloky\blocks/blk00000.dat is less than 88 bytes! Pretty obvious that your blockchain data is corrupt. Wipe your blocks folder, start BitcoinQt and let it do its thing. I suggest your update to 0.12 if you haven't yet. Title: Re: Wrong network and bad block! Post by: Hactive on April 11, 2016, 10:13:55 AM Quote File: D:\EMěna\Bitcoin\bloky\blocks/blk00000.dat is less than 88 bytes! Pretty obvious that your blockchain data is corrupt. Wipe your blocks folder, start BitcoinQt and let it do its thing. I suggest your update to 0.12 if you haven't yet. I did it three times :-(. Nothing changed. Title: Re: Wrong network and bad block! Post by: goatpig on April 11, 2016, 12:46:58 PM There's only so much I can do to help you if BitcoinQt won't download the blockchain correctly.
Title: Re: Wrong network and bad block! Post by: droark on April 11, 2016, 06:58:04 PM Quote File: D:\EMěna\Bitcoin\bloky\blocks/blk00000.dat is less than 88 bytes! Pretty obvious that your blockchain data is corrupt. Wipe your blocks folder, start BitcoinQt and let it do its thing. I suggest your update to 0.12 if you haven't yet. At the very least, please run 0.11.2 if you aren't yet. Pre-0.11.2 versions have major issues on Windows that cause constant blockchain corruption. 0.11.2 and beyond should be fine. |