|
Title: Claymore's Dual Miner: Settings and statistics Post by: ps_jb on July 14, 2016, 08:39:55 PM Thanks to Claymore we have very powerful, stable and tunable miner. We can mine ETH, ETH-DCR and ETH-SC pairs.
I want to collect here some information on statistics on the miner and performance. If you use it for ETH only or double mining - please share your information. My rig: 4x R9 390 Core Voltage: -100 mV 3x are overclocked to 1090 MHz (one is on stock 1015 MHz) Memory clock: 1500 Fan: 75% T: ~70-74C 1) Single ETH: 122 MHs 2) Dual ETH+SC: 122 MHs (ETH) 542 MHs (SC) I'm using -dcri 9. All other numbers crash the rig Title: Re: Claymore's Dual Miner: Settings and statistics Post by: Eyedol-X on July 14, 2016, 08:48:04 PM RIG 1
4x R9 390 - Using MSI AfterBurner - 4x XFX Reference Cooler Design - DCRI 30 -Core MV = -100 -Power Limit = -25 -Clock Mhz = 800 -Memory Clock Mhz - 1500 -Fan Speed = 100 ETH (Total Speed) 103 MHs SC (Total Speed) 1540 MHs Highest Temp observed, 80C Watts Measured at Wall, Not tested RIG 2 4x RX 480 - Using Wattman - 2x Gigabyte Reference Cooler Design - 2x Sapphire Reference Cooler Design - DCRI 32 -Core MV = Default -Power Limit = +2% -Clock Mhz = +2.5% -Memory Clock Mhz = 2000Mhz -Fan Speed = 82% ETH (Total Speed) 98 MHs SC (Total Speed) 1560 MHs Highest Temp observed, 74C Watts Measured at Wall, 745W Title: Re: Claymore's Dual Miner: Settings and statistics Post by: ps_jb on July 14, 2016, 09:30:01 PM SC (Total Speed) 1540 MHs Am I right that it is for default settings for -dcri? Title: Re: Claymore's Dual Miner: Settings and statistics Post by: BenSF on July 14, 2016, 09:52:51 PM The DCRI setting is very important to dial in for highest profit. Here is a calculator I am working on. If you post your MH/s values at all at the various DCRI settings I show I will create a duplicate page in that google document for your rig
https://docs.google.com/spreadsheets/d/108iYeVP33t3KESqHucSMu4TUpgsB5_ZAQJtwh4vegcM/edit?usp=sharing Title: Re: Claymore's Dual Miner: Settings and statistics Post by: ps_jb on July 14, 2016, 09:56:07 PM The DCRI setting is very important to dial in for highest profit. Here is a calculator I am working on. If you post your MH/s values at all at the various DCRI settings I show I will create a duplicate page in that google document for your rig https://docs.google.com/spreadsheets/d/108iYeVP33t3KESqHucSMu4TUpgsB5_ZAQJtwh4vegcM/edit?usp=sharing Appreciate it, but the topic is about real settings and real numbers. If you have some - please add. Title: Re: Claymore's Dual Miner: Settings and statistics Post by: Eyedol-X on July 14, 2016, 09:58:18 PM SC (Total Speed) 1540 MHs Am I right that it is for default settings for -dcri? Correct mine are default Title: Re: Claymore's Dual Miner: Settings and statistics Post by: BenSF on July 14, 2016, 10:05:16 PM Those are settings and numbers for one of my miners, Here are my most profitable settings at the moment:
Rig 6700, 3 GPUs 1. R9 270 Core Voltage: 1.1 V overclocked to 1120 MHz Memory clock: 1500 DCRI -50 Fan: 100% T: ~68-74C Dual ETH+SC: 12.9 MHs (ETH) 322 MHs (SC) 2. R9 270 Core Voltage: 1.1 V overclocked to 1030 MHz Memory clock: 1500 DCRI -50 Fan: 100% T: ~78-84C Dual ETH+SC: 12.1 MHs (ETH) 299 MHs (SC) 3. 7850 Core Voltage: 1.25 V overclocked to 1020 MHz Memory clock: 1500 DCRI -50 Fan: 60% T: ~76-82C Dual ETH+SC: 9.8 MHs (ETH) 246 MHs (SC) Totals Dual ETH+SC: 34.8MHs (ETH) 869 MHs (SC) Title: Re: Claymore's Dual Miner: Settings and statistics Post by: ps_jb on July 15, 2016, 12:06:34 AM Totals Dual ETH+SC: 34.8MHs (ETH) 869 MHs (SC) Impressive - ETH:SC=1:25 I'm getting the best ration of 1:4.5 Title: Re: Claymore's Dual Miner: Settings and statistics Post by: BenSF on July 15, 2016, 02:16:24 AM Totals Dual ETH+SC: 34.8MHs (ETH) 869 MHs (SC) Impressive - ETH:SC=1:25 I'm getting the best ration of 1:4.5 Ratio does not mean very much, I can get a ETH:SC=1:40 when I put DCRI > 80 Trick is finding the DCRI sweet spot for profit Title: Re: Claymore's Dual Miner: Settings and statistics Post by: ps_jb on July 15, 2016, 02:21:43 PM Based on published here information I did changes in my setup settings:
Original: 4x R9 390 (3x XFX 1x PowerColor) Core Voltage: -100 mV 3x are overclocked to 1090 MHz (one is on stock 1015 MHz) Memory clock: 1500 Fan: 75% T: ~70-74C Updated: 4x R9 390 Core Voltage: -100 mV 3x are overclocked to 1050 MHz (one is on stock 1015 MHz) Memory clock: 1500 Fan: 75% T: ~70-74C New stats: Dual ETH+SC: 118 MHs (ETH) 1780 MHs (SC) I used default settings in CDM (-dcri 30) Title: Re: Claymore's Dual Miner: Settings and statistics Post by: supersonic on July 15, 2016, 05:38:46 PM adding brand of gpu's would be helpfull aswell ;) ill add my rigs also when i get home
Title: Re: Claymore's Dual Miner: Settings and statistics Post by: geenius on July 15, 2016, 06:57:22 PM RIG 1
2x 290 (Sapphire TriX OC / Gigabyte) GPU: 1070 Mem: 1350 Fan: 100% Temp: ~63-66C Hashrate ETH/DCR: 58.4 / 878.7 RIG 2 3x 280X (Gigabyte OC (V1 / V2 / V3)) GPU: 1120 Mem: 1500 Fan: 100% Temp: ~62C Hashrate ETH/DCR: 54.4 / 814.4 RIG 3 2x 290 (Gigabyte / ASUS DC2 OC) GPU: 1100 Mem: 1500 Fan: 100% Temp: ~65-68C Hashrate ETH/DCR: 61.2 / 920.4 RIG 4 1x 280X (Sapphire DualX) GPU: 1120 Mem: 1500 Fan: 100% Temp: 59C Hashrate ETH/DCR: 17.8 / 266.2 RIG 5 1x 390 (Sapphire Nitro OC) GPU: 1100 Mem: 1500 Fan: 100% Temp: 59C Hashrate ETH/DCR: 30.5 / 457.6 They are all in airconditioned room with free electricity and with stock BIOS and stock voltage. Title: Re: Claymore's Dual Miner: Settings and statistics Post by: rollingdice on July 15, 2016, 11:45:24 PM 1x RX 480
Core Voltage: 1025 mV Mem Voltage: 1025 mV Core Clock: 1288 MHz Mem Clock: 9000 MHz Temperature: 77-79C Dual ETH+SC: 26.6 MH/s + 530 MH/s Win10 x64 + Crimson 16.7.1 Title: Re: Claymore's Dual Miner: Settings and statistics Post by: allcoinminer on July 16, 2016, 05:23:01 AM Sapphire 7970
ETH : 20.1 ETH/DCR : 20.1/301 ETH/SC : 20.1/ 301 Title: Re: Claymore's Dual Miner: Settings and statistics Post by: ps_jb on July 16, 2016, 01:42:35 PM 1x RX 480 Core Voltage: 1025 mV Mem Voltage: 1025 mV Core Clock: 1288 MHz Mem Clock: 9000 MHz Temperature: 77-79C Dual ETH+SC: 26.6 MH/s + 530 MH/s Win10 x64 + Crimson 16.7.1 That is interesting! Did you try to tweak the GPU parameters to see effect of performance? Title: Re: Claymore's Dual Miner: Settings and statistics Post by: rollingdice on July 16, 2016, 03:30:21 PM 1x RX 480 Core Voltage: 1025 mV Mem Voltage: 1025 mV Core Clock: 1288 MHz Mem Clock: 9000 MHz Temperature: 77-79C Dual ETH+SC: 26.6 MH/s + 530 MH/s Win10 x64 + Crimson 16.7.1 That is interesting! Did you try to tweak the GPU parameters to see effect of performance? I only changed the intensity: ethi 16 and dcri 40 Title: Re: Claymore's Dual Miner: Settings and statistics Post by: ps_jb on July 16, 2016, 04:03:46 PM I only changed the intensity: ethi 16 and dcri 40 Got you! Very good performance - thank you! Title: Re: Claymore's Dual Miner: Settings and statistics Post by: fittsy on July 17, 2016, 03:39:05 PM Do you want people to post numbers if they don't do any undervolting, overclocking, etc? Or no? Title: Re: Claymore's Dual Miner: Settings and statistics Post by: Ichskill on July 17, 2016, 03:42:50 PM Do you want people to post numbers if they don't do any undervolting, overclocking, etc? Or no? yep ;D Title: Re: Claymore's Dual Miner: Settings and statistics Post by: offi on July 17, 2016, 07:29:43 PM Hi.
1 R9 270X orginal bios gpu 1190 mem 1500 2 Sapphire AMD Radeon R9 290 bios 290_ELPIDA_MOD_V1.8 gpu 1130 mem 1500 3 MSI Radeon R9 290 GAMING 4G bios 290_HYNIX_MOD_V1.8 gpu 1140 mem 1500 EthDcrMiner64.exe -epool eth-eu.dwarfpool.com:8008 -ewal 0x3c4a03790fAD4678332476413b83eD87eA55D3bC -eworker xxx -epsw x -mode 1 -r 1 -esm 0 -tt 74,71,61 -etha 0 -cclock 1130,1140,1190 -mclock 1500,1500,1500 -ethi 16,16,16 -powlim 50,50,20 ETH - Total Speed: 78.501 Mh/s, Total Shares: 497, Rejecte ETH: GPU0 32.328 Mh/s, GPU1 32.600 Mh/s, GPU2 13.573 Mh/s Title: Re: Claymore's Dual Miner: Settings and statistics Post by: brizio71 on July 17, 2016, 09:21:21 PM Sapphire 7970 ETH : 20.1 ETH/DCR : 20.1/301 ETH/SC : 20.1/ 301 Can you post the parameter set on your card ? I have the same card but I get 16-17 as max on ETH Title: Re: Claymore's Dual Miner: Settings and statistics Post by: adaseb on July 17, 2016, 09:29:10 PM R9 290 Reference STILT BIOS MOD
Voltage dependent on ASIC Quality. 947/1250 (stock) ETH: 26 MH/s SIA: 525 MH/s +40 DCRI This currently leads to the highest payouts for a 290. I can't overclock most of my 290 because they got bad ASIC quality and crash the system while Dual mining and it gets WAY too hot and loud with fans running at 90%. Title: Re: Claymore's Dual Miner: Settings and statistics Post by: fittsy on July 17, 2016, 11:14:51 PM I don't overclock/undervolt yet. So these are stock:
Sapphire 280x ETH: 18.26 MH ETH/SIA: 18.37 MH / 275 MH EXP: 25.74 MH EXP/SIA: 24.6 MH / 367 MH - and triple mine with CPU GRS 1 MH (this is an i7 box, exp/sia works, the other coins not nearly as well.) XFX 380 ETH: 19.8 MH ETH/SIA: 19.1 MH / 286 MH ETH/DCR: 19.8 MH / 297 MH ASUS STRIX 380 ETH: 20.6 MH ETH/SIA: 19.6 MH / 294 MH ETH/DCR: 20.3 MH / 304 MH PowerColor 380x ETH: 20.4 MH ETH/SIA: 20.4 MH / 306 MH ETH/DCR: 20.3 MH / 305 MH Pretty much other than standard settings only thing I do is -tt 75 Edited for clarification on the CPU mining and corrected speed. Title: Re: Claymore's Dual Miner: Settings and statistics Post by: Eyedol-X on July 18, 2016, 02:08:43 AM Updated my original post above to include my 2nd Rig with testing and more information
Title: Re: Claymore's Dual Miner: Settings and statistics Post by: allcoinminer on July 18, 2016, 06:01:45 AM Sapphire 7970 ETH : 20.1 ETH/DCR : 20.1/301 ETH/SC : 20.1/ 301 Can you post the parameter set on your card ? I have the same card but I get 16-17 as max on ETH cclock 1150 mclock 1500 Title: Re: Claymore's Dual Miner: Settings and statistics Post by: spyshagg on July 18, 2016, 09:11:25 AM 4 x 290*
-Ethi 8 -dcri 42 https://i.imgur.com/vIUBuLg.jpg Eth= 116 Mh/s Sia= 2430 Mh/s * 1x 290x 1050mhz 1x 290x 1000mhz 1x 290 1050mhz 1x 290 1050mhz Title: Re: Claymore's Dual Miner: Settings and statistics Post by: ashkanb on July 18, 2016, 11:01:42 AM 3x R7 370
Power Limit: +20% Core Clock: 1100 Memory Clock: 1600 Fan Speed: ~45% Temp: ~66C Solo Eth: ~45.15 Mhs with the current DAG epoch #63. p.s. there's an external fan pointing directly at the rig; consumes 60w/h & does dang good job managing the cards temp! Title: Re: Claymore's Dual Miner: Settings and statistics Post by: neogen1 on July 18, 2016, 12:18:48 PM I don't overclock/undervolt yet. So these are stock: Sapphire 280x ETH: 18.26 MH ETH/SIA: 18.37 MH / 275 MH EXP: 25.74 MH EXP/SIA: 24.6 MH / 367 MH - and triple mine with CPU GRS 1 MH (this is an i7 box, exp/sia works, the other coins not nearly as well.) XFX 380 ETH: 19.8 MH ETH/SIA: 19.1 MH / 286 MH ETH/DCR: 19.8 MH / 297 MH ASUS STRIX 380 ETH: 20.6 MH ETH/SIA: 19.6 MH / 294 MH ETH/DCR: 20.3 MH / 304 MH PowerColor 380x ETH: 20.4 MH ETH/SIA: 20.4 MH / 306 MH ETH/DCR: 20.3 MH / 305 MH Pretty much other than standard settings only thing I do is -tt 75 Edited for clarification on the CPU mining and corrected speed. Can you tell me the conf for mining EXP and SIA Title: Re: Claymore's Dual Miner: Settings and statistics Post by: ps_jb on July 18, 2016, 03:28:39 PM 3x R7 370 Power Limit: +20% Core Clock: 1100 Memory Clock: 1600 Fan Speed: ~45% Temp: ~66C Solo Eth: ~45.15 Mhs with the current DAG epoch #63. p.s. there's an external fan pointing directly at the rig; consumes 60w/h & does dang good job managing the cards temp! Just for statistics - next time you will restart your rig (hopefully not very soon!) - could you please make a simple test with SIA/DCR using -dcri 40 (50, 75)? Title: Re: Claymore's Dual Miner: Settings and statistics Post by: fittsy on July 18, 2016, 03:36:40 PM Can you tell me the conf for mining EXP and SIA Sure. Here is what my config.txt looks like. Code: -epool exp-us.dwarfpool.com:8018 You need the / between the dwarfpool wallet/worker for exp You need the & between the sia.nanopool wallet Any other optional settings you want to use like -tt or -dcri or whatever. I use -tt 75. Title: Re: Claymore's Dual Miner: Settings and statistics Post by: ps_jb on July 18, 2016, 11:04:19 PM Updates:
4x R9 390 Core Voltage: -100 mV 3x (XFX) are overclocked to 1050 MHz (one is on stock 1010 MHz - PowerColor) Memory clock: 1500 Fan: 75% T: ~78-80C New stats: Dual ETH+SC: 116 MHs (EXP) 2235 MHs (SC) I used default settings in CDM (-dcri 40) Title: Re: Claymore's Dual Miner: Settings and statistics Post by: Balgun on July 19, 2016, 01:36:41 PM 6xSapphire 390 Nitro
Powerlimit +50% 1120 cclock 1250 mclock 67% - 72% fan 67-72C temperature ETH/SIA TOTAL: 184 m/hs ETH 37xx m/hs SIA dcri 40 Greetings. Title: Re: Claymore's Dual Miner: Settings and statistics Post by: ps_jb on July 19, 2016, 01:49:50 PM 6xSapphire 390 Nitro Powerlimit +50% 1120 cclock 1250 mclock 67% - 72% fan 67-72C temperature ETH/SIA TOTAL: 184 m/hs ETH 37xx m/hs SIA dcri 40 Greetings. Do you use stock voltage? Temperature for such overclocking is very good Title: Re: Claymore's Dual Miner: Settings and statistics Post by: Balgun on July 19, 2016, 01:52:01 PM I might add, that it is part of a professional server room with ideal ventilation.
Right now i have stable 20C in the room. Therefore voltage is stock. Title: Re: Claymore's Dual Miner: Settings and statistics Post by: UberMakedonische on July 22, 2016, 08:22:34 PM RIG 1
4x 290 Sapphire TriX OC GPU: 1080 Mem: 1250 Fan: 80% Temp: ~70-80C Hashrate ETH/SIA: 116.1 / 2300 RIG 2 3x 290 Sapphire TriX OC GPU: 1080 Mem: 1250 Fan: 80% Temp: ~70-80C Hashrate ETH/SIA: 80.4 / 1615.4 RIG 3 3x 290 Sapphire TriX OC GPU: 1080 Mem: 1250 Fan: 80% Temp: ~70-80C Hashrate ETH/SIA: 80.4 / 1615.4 all rigs are on -dcri 40 Title: Re: Claymore's Dual Miner: Settings and statistics Post by: Bakery on July 23, 2016, 04:38:51 PM 6x370 Asus strix
Core: 1100 Mem: 1600 Total: ~90Mh/s ~870W from wall -tt 77 fans: 57,59,51,43,35,32% Ethereum only mode. Title: Re: Claymore's Dual Miner: Settings and statistics Post by: citronick on July 23, 2016, 10:16:57 PM Just started dual mining SC - is the following about right for a 6 GPU Nanos?
6 x R9 Nanos/W8.1/Celeron1840/HSrock H81/16GB RAM/120GB SSD Nanos are modded with Heliox -125mV ROM, and OC a bit to 1040/300 ETH - Total Speed: 157.159 Mh/s ETH: GPU0 26.407 Mh/s, GPU1 26.098 Mh/s, GPU2 26.227 Mh/s, GPU3 26.321 Mh/s, GPU4 25.910 Mh/s, GPU5 26.196 Mh/s SC - Total Speed: 2357.385 Mh/s SC: GPU0 396.102 Mh/s, GPU1 391.471 Mh/s, GPU2 393.409 Mh/s, GPU3 394.816 Mh/s, GPU4 388.650 Mh/s, GPU5 392.937 Mh/s Title: Re: Claymore's Dual Miner: Settings and statistics Post by: ps_jb on July 24, 2016, 12:58:44 AM Just started dual mining SC - is the following about right for a 6 GPU Nanos? 6 x R9 Nanos/W8.1/Celeron1840/HSrock H81/16GB RAM/120GB SSD Nanos are modded with Heliox -125mV ROM, and OC a bit to 1040/300 ETH - Total Speed: 157.159 Mh/s ETH: GPU0 26.407 Mh/s, GPU1 26.098 Mh/s, GPU2 26.227 Mh/s, GPU3 26.321 Mh/s, GPU4 25.910 Mh/s, GPU5 26.196 Mh/s SC - Total Speed: 2357.385 Mh/s SC: GPU0 396.102 Mh/s, GPU1 391.471 Mh/s, GPU2 393.409 Mh/s, GPU3 394.816 Mh/s, GPU4 388.650 Mh/s, GPU5 392.937 Mh/s Thank you, citronick What your -dcri value is? Title: Re: Claymore's Dual Miner: Settings and statistics Post by: citronick on July 24, 2016, 08:59:24 AM Just started dual mining SC - is the following about right for a 6 GPU Nanos? 6 x R9 Nanos/W8.1/Celeron1840/HSrock H81/16GB RAM/120GB SSD Nanos are modded with Heliox -125mV ROM, and OC a bit to 1040/300 ETH - Total Speed: 157.159 Mh/s ETH: GPU0 26.407 Mh/s, GPU1 26.098 Mh/s, GPU2 26.227 Mh/s, GPU3 26.321 Mh/s, GPU4 25.910 Mh/s, GPU5 26.196 Mh/s SC - Total Speed: 2357.385 Mh/s SC: GPU0 396.102 Mh/s, GPU1 391.471 Mh/s, GPU2 393.409 Mh/s, GPU3 394.816 Mh/s, GPU4 388.650 Mh/s, GPU5 392.937 Mh/s Thank you, citronick What your -dcri value is? none. I only set for ETH which is maximum -ethi 16 For any 2nd coin, I just let it rip and get the Nanos to work as hard as possible because these Nanos are undervolted using the Heliox rom, and overclocked a bit. So far these Nanos are heavily stretched but they run cool at 68-72c So just let them fly.... Title: Re: Claymore's Dual Miner: Settings and statistics Post by: ps_jb on July 24, 2016, 07:24:55 PM I only set for ETH which is maximum -ethi 16 For any 2nd coin, I just let it rip and get the Nanos to work as hard as possible because these Nanos are undervolted using the Heliox rom, and overclocked a bit. So far these Nanos are heavily stretched but they run cool at 68-72c So just let them fly.... Did you try play with -dcri too? At value around 30-35 you will have about the same ETH mining speed, but higher ALT compared to pre-set values Title: Re: Claymore's Dual Miner: Settings and statistics Post by: citronick on July 24, 2016, 07:31:09 PM I only set for ETH which is maximum -ethi 16 For any 2nd coin, I just let it rip and get the Nanos to work as hard as possible because these Nanos are undervolted using the Heliox rom, and overclocked a bit. So far these Nanos are heavily stretched but they run cool at 68-72c So just let them fly.... Did you try play with -dcri too? At value around 30-35 you will have about the same ETH mining speed, but higher ALT compared to pre-set values power bill is my major concern. I am sure -dcri 30-45 will further increase power consumption and heat. Title: Re: Claymore's Dual Miner: Settings and statistics Post by: ps_jb on July 24, 2016, 07:43:36 PM power bill is my major concern. I am sure -dcri 30-45 will further increase power consumption and heat. Do you have a watt-meter? My 4x R9 390 + periferia give me 1320W from wall Title: Re: Claymore's Dual Miner: Settings and statistics Post by: citronick on July 24, 2016, 08:19:58 PM power bill is my major concern. I am sure -dcri 30-45 will further increase power consumption and heat. Do you have a watt-meter? My 4x R9 390 + periferia give me 1320W from wall Yes I use the watt-meter. My ETH rigs are mining at home so there is not enough amps to go around. Until, I find a way to send these rigs to join my BTC miners to outsourced DC, need to underclock and undervolt as much as possible, to save on power. Title: Re: Claymore's Dual Miner: Settings and statistics Post by: LoneRangir on July 29, 2016, 03:58:54 AM Four 480s: 2 x PowerColor 8GB Reference and 2 x XFX Reference 8GB
Biostar Z170 Board w/ 4 physical x16 slots W7 & Latest Radeon drivers 630W from kill-o-watt 99 MH/s Need to spend some time optimizing the MH/s / W Title: Re: Claymore's Dual Miner: Settings and statistics Post by: ps_jb on July 29, 2016, 04:16:15 AM Four 480s: 2 x PowerColor 8GB Reference and 2 x XFX Reference 8GB Biostar Z170 Board w/ 4 physical x16 slots W7 & Latest Radeon drivers 630W from kill-o-watt 99 MH/s Need to spend some time optimizing the MH/s / W Am I right that all cards are with stock settings? Title: Re: Claymore's Dual Miner: Settings and statistics Post by: LoneRangir on July 29, 2016, 04:50:46 AM Four 480s: 2 x PowerColor 8GB Reference and 2 x XFX Reference 8GB Biostar Z170 Board w/ 4 physical x16 slots W7 & Latest Radeon drivers 630W from kill-o-watt 99 MH/s Need to spend some time optimizing the MH/s / W Am I right that all cards are with stock settings? The only stable change I can make is to reduce the power setting for each card down to -25%. When I tweak anything else, the stability is crap. I will swap the current 750W for my 850W tomorrow to see if that affects anything. I've not attempted to flash the ROM on any cards. Title: Re: Claymore's Dual Miner: Settings and statistics Post by: ps_jb on July 29, 2016, 05:34:32 AM I will swap the current 750W for my 850W tomorrow to see if that affects anything. I dont think it is a PSU issue - but keep us posting on the results Title: Re: Claymore's Dual Miner: Settings and statistics Post by: adaseb on July 29, 2016, 08:35:02 AM Basically if you have any of the old Tahiti based cards (7950,7970,280X) your highest profit will be at +DCRI 60.
Right now with the current diff, you will make +40% extra per day compared to mining ETH alone. However, It will use about 30-40% more power, pretty much the exact same amount of power as in the litecoin mining days. A single 280x will use 300 watts almost. So depending on what kind of setup you got, it might be worth it for you. Its basically no different than buying a few more 7970/280x GPUs but you don't have to actually buy anything since it will use the exact same amount of power. Title: Re: Claymore's Dual Miner: Settings and statistics Post by: Mzie on July 30, 2016, 07:21:07 AM Mining ETC/DCR
XFX R9 380 4GB Temp - Maximum is 60° Undervolted Fan 60% 21Mh/s ETC 325 Mh/s DCR Title: Re: Claymore's Dual Miner: Settings and statistics Post by: supersonic on July 30, 2016, 08:16:51 AM https://i.gyazo.com/988ed2b489f56706bf481fb27d385721.png
Rig 1 ETC only 3xSapphire 290Vapor 1030core -75mV 1xSapphire 290X Tri-X 1040core -75mV 1xSapphire 390 Nitro 1040core -75mV Power draw 1250W Rig 2 ETC only 3xSapphire Nitro 390X 1080core -75mV 1xSapphire Nitro 390 1040core -75mV Power draw 1090W i have 31C outside in summer so its pretty hardcore, so im helping myself with external fan to blow off heat from rigs Title: Re: Claymore's Dual Miner: Settings and statistics Post by: willi9974 on July 31, 2016, 04:26:16 PM Nice topic, i will post my settings later
Title: Re: Claymore's Dual Miner: Settings and statistics Post by: adaseb on August 01, 2016, 09:01:17 AM After much testings,
If you have a 7970/280x, you are better off dual mining SIA with that card than buying another rig with a RX480. Mining SIA with +30 intensity will make you about the same money using about 6.66W/Mhs when sold for ETH. Basically its efficient to dual mine only rather than ETH solo mine and sell SIA for ETH/BTC. This is only true if the SIA difficulty and price are stable. Title: Re: Claymore's Dual Miner: Settings and statistics Post by: willi9974 on August 01, 2016, 04:18:44 PM Hello,
here are my settings and the power what i have. 6 Cards from type Saphiere RX 480 8 GB Code: SC Speed ~ 2300 MHs ETH - Total Speed: 156.350 Mh/s, Total Shares: 19, Rejected: 0, Time: 00:16 ETH: GPU0 26.072 Mh/s, GPU1 26.026 Mh/s, GPU2 21.463 Mh/s, GPU3 25.976 Mh/s, GPU4 25.996 Mh/s, GPU5 26.067 Mh/s SC - Total Speed: 2345.239 Mh/s, Total Shares: 45, Rejected: 0 SC: GPU0 389.627 Mh/s, GPU1 377.211 Mh/s, GPU2 252.559 Mh/s, GPU3 385.632 Mh/s, GPU4 383.748 Mh/s, GPU5 384.098 Mh/s Title: Re: Claymore's Dual Miner: Settings and statistics Post by: citronick on August 01, 2016, 05:48:42 PM Hello, here are my settings and the power what i have. 6 Cards from type Saphiere RX 480 8 GB Code: SC Speed ~ 2300 MHs ETH - Total Speed: 156.350 Mh/s, Total Shares: 19, Rejected: 0, Time: 00:16 ETH: GPU0 26.072 Mh/s, GPU1 26.026 Mh/s, GPU2 21.463 Mh/s, GPU3 25.976 Mh/s, GPU4 25.996 Mh/s, GPU5 26.067 Mh/s SC - Total Speed: 2345.239 Mh/s, Total Shares: 45, Rejected: 0 SC: GPU0 389.627 Mh/s, GPU1 377.211 Mh/s, GPU2 252.559 Mh/s, GPU3 385.632 Mh/s, GPU4 383.748 Mh/s, GPU5 384.098 Mh/s hi willi - how many amps does this rig take? thanks Title: Re: Claymore's Dual Miner: Settings and statistics Post by: willi9974 on August 01, 2016, 05:52:46 PM my AmperMeter say 4,51 AMP
why is this information important for you? Title: Re: Claymore's Dual Miner: Settings and statistics Post by: citronick on August 01, 2016, 05:55:21 PM my AmperMeter say 4,51 AMP why is this information important for you? my warehouse only gave me 63amps, 3-phase. so i need to be careful on the watts and amps. I am undervolting as much as possible - to save on power bill But NOT so easy to undervolt 480s compared to 390s and Nanos. Title: Re: Claymore's Dual Miner: Settings and statistics Post by: ps_jb on August 02, 2016, 02:30:24 PM my warehouse only gave me 63amps, 3-phase. so i need to be careful on the watts and amps. How much electricity in Germany nowadays? If you live close to Switzerland you can rent a warehouse with VERY cheap electricity Title: Re: Claymore's Dual Miner: Settings and statistics Post by: willi9974 on August 02, 2016, 02:41:42 PM at the moment i pay 28 Cent per KWh but after november i have a new contract with 19 Cent per KWh
Title: Re: Claymore's Dual Miner: Settings and statistics Post by: aleixoto on August 03, 2016, 10:46:55 AM at the moment i pay 28 Cent per KWh but after november i have a new contract with 19 Cent per KWh i pay 0 for kW xDDD Title: Re: Claymore's Dual Miner: Settings and statistics Post by: ps_jb on August 03, 2016, 12:57:37 PM i pay 0 for kW xDDD Please put the statistics on your rig and hashing power Title: Re: Claymore's Dual Miner: Settings and statistics Post by: eretron on August 04, 2016, 08:14:56 PM Hello, here are my settings and the power what i have. 6 Cards from type Saphiere RX 480 8 GB Code: SC Speed ~ 2300 MHs ETH - Total Speed: 156.350 Mh/s, Total Shares: 19, Rejected: 0, Time: 00:16 ETH: GPU0 26.072 Mh/s, GPU1 26.026 Mh/s, GPU2 21.463 Mh/s, GPU3 25.976 Mh/s, GPU4 25.996 Mh/s, GPU5 26.067 Mh/s SC - Total Speed: 2345.239 Mh/s, Total Shares: 45, Rejected: 0 SC: GPU0 389.627 Mh/s, GPU1 377.211 Mh/s, GPU2 252.559 Mh/s, GPU3 385.632 Mh/s, GPU4 383.748 Mh/s, GPU5 384.098 Mh/s I have 6x 480 gpus all of them are 1000mhz @ 800mV Mem 2000mhz Getting 24.5MH/s per card @ 900W for whole rig at the wall How did You get memory to 2200mhz? Max I can set in Wattman is 2050.... If I read correctly older version of ati drivers could push them to 2200? So what is your OS and driver version? Thanks Title: Re: Claymore's Dual Miner: Settings and statistics Post by: willi9974 on August 04, 2016, 08:45:05 PM Hi,
I use the lastest driver Version from the amd Web Site and Windows 10 Title: Re: Claymore's Dual Miner: Settings and statistics Post by: eretron on August 04, 2016, 08:46:48 PM Strange, I am on Windows 8.1, and max I can set is 2050...
Will investigate a bit on that tomorrow... Mine are PowerColor and ASUS 480s Thanks Title: Re: Claymore's Dual Miner: Settings and statistics Post by: Cryptozillah on August 08, 2016, 07:17:22 AM Strange, I am on Windows 8.1, and max I can set is 2050... You probably have the 16.7.3 driver that have lower mem clock limit (2050)Will investigate a bit on that tomorrow... Mine are PowerColor and ASUS 480s Thanks Switch to 16.7.2 and the limit will be 2250. Title: Re: Claymore's Dual Miner: Settings and statistics Post by: aleixoto on August 09, 2016, 06:02:26 AM I only changed the intensity: ethi 16 and dcri 40 Got you! Very good performance - thank you! i have 1x R9 280x Sapphire win 7 x64 claymore 5.3 driver 15.12 and set overclocking to 1100/1600 powelimit 20, -dcri 60 -ethi 16 i get 17.2 M'hs ETH and 517 m'hs SIA. dual miner when i dont use overclock i get 15 M'hs eth and 240 mhs sia i test to use ethOS distribution linux and get 17mhs max.. why people can mine with 20mhs and i cant????? Thanks rep++ Title: Re: Claymore's Dual Miner: Settings and statistics Post by: ps_jb on August 09, 2016, 11:11:39 PM -dcri 60 -ethi 16 i get 17.2 M'hs ETH and 517 m'hs SIA. dual miner [/color][/b] why people can mine with 20mhs and i cant????? Thanks rep++ -dcri 60 That is you problem. this value for dual mining should be maximum 40 Title: Re: Claymore's Dual Miner: Settings and statistics Post by: adaseb on August 10, 2016, 02:20:50 AM You can't get 20MH/s with a 280X anymore. Max is maybe 18.50-19.00MH/s
Title: Re: Claymore's Dual Miner: Settings and statistics Post by: citronick on August 10, 2016, 06:47:02 PM You can't get 20MH/s with a 280X anymore. Max is maybe 18.50-19.00MH/s There is a Stilt BIOS which was used to maximise Litecoin/Scrypt mining. I wonder if that BIOS can push the max to mine ETH. Been looking for this Stilt BIOS high and low but I couldn't find it. Anybody has one? Title: Re: Claymore's Dual Miner: Settings and statistics Post by: d57heinz on August 10, 2016, 08:17:41 PM You can't get 20MH/s with a 280X anymore. Max is maybe 18.50-19.00MH/s There is a Stilt BIOS which was used to maximise Litecoin/Scrypt mining. I wonder if that BIOS can push the max to mine ETH. Been looking for this Stilt BIOS high and low but I couldn't find it. Anybody has one? Check this out. hope you can find them here.. I would save them all just to make sure you have them. seems they are being deleted everywhere. Get em while ya can now may be useful in the future. https://drive.google.com/drive/folders/0B2XVfIhkHZlfcVR0QzhlQlhJYTA https://litecointalk.org/index.php?topic=16623 https://litecointalk.org/index.php?topic=12830.0 Best Regards d57heinz Title: Re: Claymore's Dual Miner: Settings and statistics Post by: pwpwpw on August 10, 2016, 08:25:34 PM 280x used to have 20+ mh on eth but that is over since the dag size increase, stilt bios won't help you, I have 4 r9 280x with stilt bios and runs at 17.8-18.3eth / 446-460 sia (2different brands, undervolted to the max)
Title: Re: Claymore's Dual Miner: Settings and statistics Post by: d57heinz on August 10, 2016, 08:36:27 PM 280x used to have 20+ mh on eth but that is over since the dag size increase, stilt bios won't help you, I have 4 r9 280x with stilt bios and runs at 17.8-18.3eth / 446-460 sia (2different brands, undervolted to the max) Thanks for the info.. Id keep them anyway never know what will be the next profitable coin to mine after eth goes POS. Could be some advantage.. I agree tho i dont think we will squeeze much more hash outta those 7970/280x cards. i just purchased an xfx rx470 shows only 102 watt total draw on gpu z @ 22mhs Eth. will confirm once i have some more time. Been fighting heat again.. Pushing mid 90's in midwest with 75% humidity. Ill get you some real world data later this weekend. I have a whole variety of cards to show results. Best Regards d57heinz Title: Re: Claymore's Dual Miner: Settings and statistics Post by: BitcoinGeekBoy on August 11, 2016, 12:09:10 AM https://i.imgur.com/qSHX5X1.jpg
MSI R9 290 with Arctic Accelero Hybrid III - 140 (R9-290X) Multi-Compatible Air/Liquid Cooler Title: Re: Claymore's Dual Miner: Settings and statistics Post by: fittsy on August 11, 2016, 01:47:33 AM https://i.imgur.com/qSHX5X1.jpg MSI R9 290 with Arctic Accelero Hybrid III - 140 (R9-290X) Multi-Compatible Air/Liquid Cooler Am I missing something? It's entirely possible I'm wrong. I just did the math in my head. At $99 for this cooler this isn't worth it. The speed improvement isn't enough to justify the cost of the cooler. You can just buy more GPUs. Title: Re: Claymore's Dual Miner: Settings and statistics Post by: BitcoinGeekBoy on August 11, 2016, 02:14:47 AM https://i.imgur.com/qSHX5X1.jpg MSI R9 290 with Arctic Accelero Hybrid III - 140 (R9-290X) Multi-Compatible Air/Liquid Cooler Am I missing something? It's entirely possible I'm wrong. I just did the math in my head. At $99 for this cooler this isn't worth it. The speed improvement isn't enough to justify the cost of the cooler. You can just buy more GPUs. True but the fans on the MSI 290 are horrible and have a short life. Also very loud and run pretty hot at 100% GPU utilization. 30-40 days and the cooler is paid for hopefully. I have had these 290s many months now and they have paid for themselves already. 1 fan on each of my 290s died recently and I was tired of the heat and the noise the factory cooler put out. Title: Re: Claymore's Dual Miner: Settings and statistics Post by: fittsy on August 11, 2016, 03:38:14 AM True but the fans on the MSI 290 are horrible and have a short life. Also very loud and run pretty hot at 100% GPU utilization. 30-40 days and the cooler is paid for hopefully. I have had these 290s many months now and they have paid for themselves already. 1 fan on each of my 290s died recently and I was tired of the heat and the noise the factory cooler put out. That actually makes sense. If you have busted fans it may be cheaper to buy one of these coolers than a new GPU. I'll have to keep that in mind for my own equipment! Title: Re: Claymore's Dual Miner: Settings and statistics Post by: gary_aut on August 12, 2016, 10:28:35 AM RIG 1:
6 x Sapphire R9-390 @ stock Speed, no undervolting, +50 powerlimit DCRI 40 ETH: 174,04 MH/s @Ethermine SIA: 3484 MH/s @localhost (solo) RIG 2: 2 x MSI RX 480 @ stock Speed, no undervolting, no powerlimit DCRI 45 ETH: 48,54 MH/s @Ethermine SIA: 1078 MH/s @localhost (solo) Title: Re: Claymore's Dual Miner: Settings and statistics Post by: ps_jb on August 12, 2016, 10:41:06 AM RIG 1: 6 x Sapphire R9-390 @ stock Speed, no undervolting, +50 powerlimit DCRI 40 ETH: 174,04 MH/s @Ethermine SIA: 3484 MH/s @localhost (solo) RIG 2: 2 x MSI RX 480 @ stock Speed, no undervolting, no powerlimit DCRI 45 ETH: 48,54 MH/s @Ethermine SIA: 1078 MH/s @localhost (solo) Any reason why you dont want to slightly overclock the rigs? Title: Re: Claymore's Dual Miner: Settings and statistics Post by: willi9974 on August 12, 2016, 03:29:49 PM SIA: 1078 MH/s @localhost (solo) can you explain to mine Solo SIA Coins? it sounds interesting... Title: Re: Claymore's Dual Miner: Settings and statistics Post by: gary_aut on August 12, 2016, 07:01:13 PM For sure, there are two reasons why I run my Rigs on stock Speed:
On the 390er Rig I use 2 x Corsair HX1200i (3 x r9-390 on 1 PSU) When I overclock the 6 Cards there drain over 2250 Watts from the PSU´s. Its unsafe for me to push the Units to there Limits. And the Temperature goes much higher. On warm Days over 83 +. If I build more Rigs and can put them in a separate Room with air condition then I can tune up these Cards. With overclocking the Single R9-390 Rig reach about 198 MH/s hashing Speed. @willi9974 Ich habe SIA Coins seit dem 16.ten Juli mit Claymores Dualminer laufen. Da SIA eh nur nebenbei gerechnet wird habe ich von den Pools abgesehen und eigentlich immer solo gerechnet. Ich bin bis jetzt sehr gut damit gefahren. 4 Blöcke in knapp einem Monat. Sicher braucht man auch etwas Glück. Mit SIA geht das überraschend einfach: 1.) SIA-UI installieren, Seed aufschreiben/abspeichern, Wallet öffnen 2.) Claymore starten :-) Meine Befehlszeile: EthDcrMiner64.exe -epool eu1.ethermine.org:4444 -ewal xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx.worker -epsw x -dpool http://localhost:9980/miner/header -dcoin sia -mode 0 -dcri 45 -tstop 85 -ethi 16 -dbg -1 cg Gary Title: Re: Claymore's Dual Miner: Settings and statistics Post by: ps_jb on August 12, 2016, 10:37:54 PM For sure, there are two reasons why I run my Rigs on stock Speed: On the 390er Rig I use 2 x Corsair HX1200i (3 x r9-390 on 1 PSU) When I overclock the 6 Cards there drain over 2250 Watts from the PSU´s. Its unsafe for me to push the Units to there Limits. And the Temperature goes much higher. On warm Days over 83 +. If I build more Rigs and can put them in a separate Room with air condition then I can tune up these Cards. With overclocking the Single R9-390 Rig reach about 198 MH/s hashing Speed. Thank you, Gary Danke! Title: Re: Claymore's Dual Miner: Settings and statistics Post by: ps_jb on August 12, 2016, 10:52:04 PM Question:
Why my AfterBurner does not allow me to change memory clock? Win 7, Crimson 15.12 4x R9 390 (3x XFN and 1x PowerColor) Should I unlock smth in AB or what :) ? Title: Re: Claymore's Dual Miner: Settings and statistics Post by: Mzie on August 16, 2016, 09:16:28 AM did you try -dcri 25? it should work and give over 1000Mh/s for sia
Title: Re: Claymore's Dual Miner: Settings and statistics Post by: hiddensphinx on August 16, 2016, 11:00:21 AM MSI GTX 1070 getting 27MH/s with DaggerHashimoto and 0.38 GH/s with Decreed dual mining
is this good? Title: Re: Claymore's Dual Miner: Settings and statistics Post by: brizio71 on August 16, 2016, 11:40:02 AM MSI GTX 1070 getting 27MH/s with DaggerHashimoto and 0.38 GH/s with Decreed dual mining is this good? what is the power drain ? Can you try with siacoin too ? Title: Re: Claymore's Dual Miner: Settings and statistics Post by: hiddensphinx on August 16, 2016, 04:52:19 PM MSI GTX 1070 getting 27MH/s with DaggerHashimoto and 0.38 GH/s with Decreed dual mining is this good? what is the power drain ? Can you try with siacoin too ? Power drain is at 45% according to MSI Afterburner...GPU temp = 60 Celsius and CPU TEMP = 55 Celsius https://i.imgur.com/xoJqSL9.jpg Title: Re: Claymore's Dual Miner: Settings and statistics Post by: Amph on August 16, 2016, 05:41:22 PM increase the mem to 400 at least, you can boost the speed for eth to 30MH
Title: Re: Claymore's Dual Miner: Settings and statistics Post by: hatshepsut93 on August 16, 2016, 07:09:36 PM GTX 1060 reporting in.
Windows 10 1607, driver 372.54 Ether 3.839 MH, Decred 38.393 MH. Is there anything I can do, or my card is not supported? Title: Re: Claymore's Dual Miner: Settings and statistics Post by: blue-yu on August 16, 2016, 09:14:24 PM Win7, 3*gtx970, +150cpu, +500mem, 368.81 driver:
dual: 63Mh/s eth + 627Mh/s dcr single: 66Mh/s eth genoil: 65Mh/s BR... Title: Re: Claymore's Dual Miner: Settings and statistics Post by: janos666 on August 17, 2016, 09:52:23 PM I run some reference design RX480 8Gb cards with default GPU clock/voltage settings (for some reason, these controls are completely locked in WattMan whenever a mining software is running) and the VRAM clocked to 2250MHz (max allowed) with default RAM voltage (I could try under-volting the RAM but I don't think it would worth the hassle since it draws significantly less power than the GPU to begin with and it's overclocked, so it probably needs the voltage anyway...) and I get 27 + 405 Mh/s (ETH+DCR) on each with Claymore's software (v6.1) on Win10 RS1 + Catalyst 16.8.2 beta.
The PSU is rated at ~90% efficiency at ~50% load (and that's roughly the current situations with the 1200W rated PSU drawing 780W from the wall with 3 of these cards + the 30W idle platform [measured alone], so it's ~60% load), so the cards take roughly ~225W (according to measurements and calculations) which is exactly their maximum theoretical limit (150*1.5=225W with the PowerLimit set to +50% over the original 150W TDP limit). Title: Re: Claymore's Dual Miner: Settings and statistics Post by: Strannik-74 on August 18, 2016, 12:02:19 AM http://c2n.me/3BjQX7L.jpg (http://c2n.me/3BjQX7L)
130W Title: Re: Claymore's Dual Miner: Settings and statistics Post by: rawbert on August 18, 2016, 03:48:20 AM Title: Re: Claymore's Dual Miner: Settings and statistics Post by: Strannik-74 on August 18, 2016, 07:48:50 AM 130W in gpuz or at the wall? rig without load 110W, rig load 230W, power meter reading from the power socket. Title: Re: Claymore's Dual Miner: Settings and statistics Post by: xeridea on August 18, 2016, 06:00:49 PM Sapphire 470 8GB 24.3 / 445 MH/s , 1260MHz steady clock, 0.95v core, 109w 88.5% ASIC Quality
Powercolor Red Devil 470 4GB 22 / 405 MH/s, ~1140 Mhz varying boost, 0.97v core, 77.9% ASIC quality Mining Eth/Sia, 80+ Bronze PSU, 85% eff, ~130 for each card, 155 at the wall, 109w GPU only draw The 8GB version mines Eth faster, (8GHz memory vs 7Ghz), and has more stable boost (at least mine does), but costs $40 more. The GTX 1060 3GB just came out, for $200. 1 out of 12 CUs disabled vs the normal 1060, same clocks and memory. Normal 1060 gets 20MHs Eth, it may be a decent card for similar price. Anyone getting one feel free to post! Title: Re: Claymore's Dual Miner: Settings and statistics Post by: DrX on September 04, 2016, 07:41:55 PM RIG1: (Windows 7, AMD 15.12, intel e8400, 2gb ram)
MSI Gaming 4G 290 , Eth 27.5 Sia/Dcr 636Mh/s , Mem 1250 Core 1070. MSI Gaming 4G 290x , Eth 28.5 Sia/Dcr 656Mh/s , Mem 1350 Core 1070. Total Eth 56/57 + Sia/Dcr 1292Mh/s EthDcrMiner64.exe -dbg -1 -epool POOL -ewal MYWALLET -eworker WORKER.1 -epsw PASSWORD -allpools 1 -dpool POOL -dwal WORKER.1 -dpsw PASSWORD -dcoin sc -dcri 46,46 RIG2: (Windows 8.1, AMD 15.12, amd x2 4200. 2gb ram) XFX 7950 , Eth 15.7Mh/s Sia/Dcr 361Mh/s, Mem 1250 Core 900 XFX 7950, Eth 16.5Mh/s Sia/Dcr 386Mh/s , Mem 1500 Core 900. XFX 280 , Eth 16.5Mh/s Sia/Dcr 386Mh/s, Mem 1500 Core 900. Total Eth 48.7/49.7 + Sia/Dcr 1133Mh/s Mining DCR gives 1Mh/s more on both rigs. EthDcrMiner64.exe -dbg -1 -epool POOL -ewal MYWALLET -eworker WORKER.2 -epsw PASSWORD -allpools 1 -dpool POOL -dwal WORKER.2 -dpsw PASSWORD -dcoin sc -dcri 46,46,46 Total power from the wall 1350w (SIA) Total power from the wall 1250w (DCR) Updated 19.10.2016 Title: Re: Claymore's Dual Miner: Settings and statistics Post by: DrX on September 06, 2016, 06:44:03 AM Hello, I'm using 2x R390 mining eth and sc using this command: EthDcrMiner64.exe -epool eth-asia1.nanopool.org:9999 -ewal <address> -epsw x -eworker <worker> -cclock 1100 -etha 0 -ethi 8 -dcri 40 -dpool "http://siamining.com:9980/miner/header?address=<address>&worker=<worker>" -dcoin sia eth: 48 sc: 930 Is there any way to increase those speed? Any parameter at the command to be changed? Appreciate for any info. Thanks. Play with dcri, optimal should be between 35-50 (You can adjust it with + and - keys while mining) , you can also try -ethi 16....and maybe -cclock 1120 -mclock 1250? Check settings from other people stats... Title: Re: Claymore's Dual Miner: Settings and statistics Post by: Trimegistus on September 09, 2016, 11:40:07 PM RIG specs:
Asrock H81 Pro BTC 8 GB RAM + 16 GB Pagefile 6 x Sapphire RX 480 Nitro+ OC 4GB USB Powered Risers 2 x Corsair RM850X Software: Windows 10 x64 AMD drivers 16.9.1 Miner Settings: Claymore v6.4 -dcri 25 -ethi 16 Stock settings: GPU: 1305 MHz, 1150 mV Mem: 1750 MHz, 1000 mv Speed per card: 22.1 MHs ETC, 276 MHs SC Power per card: ~130W (GPU-Z) Underclock: GPU: 1250 MHz, 1025 mV Mem: 1850 MHz, Auto Speed per card: 22 MHs ETC, 275 MHs SC Power per card: ~105W (GPU-Z) Unfortunately, I cannot get the miner to stabilize with a higher memory speed, it crashes after a few minutes if I set it at 1900 MHz Title: Re: Claymore's Dual Miner: Settings and statistics Post by: vapourminer on September 10, 2016, 01:15:15 AM rig 1 (daily driver)
win7 64, 16 gb ram, gigabyte Z77X UD5H, i5 3570K claymore 7.0 16.8.2 driver sapphire R9 390 Nitro 8 gb 1100 gpu, 1500 mem -50 mv +20 power limit -40 dcri 29 MH/s eth 580 MH/s sia rig 2 ubuntu 15.10, 8 gb ram, gigabyte Z97X UDH3, intel G1840 claymore 7.0 15.12 driver sapphire R9 390 nitro 8 gb 1100 gpu 1500 mem stock volts -40 dcri 30 MH/s eth 606 MH/s sia sapphire R9 380 ITX 2 gb 1100 gpu, 1400 mem stock volts -40 dcri 19 MH/s eth 386 MH/s sia Title: Re: Claymore's Dual Miner: Settings and statistics Post by: Trimegistus on September 17, 2016, 04:56:54 PM Updated stats and settings:
RIG specs: Asrock H81 Pro BTC 8 GB RAM + 16 GB Pagefile 6 x Sapphire RX 480 Nitro+ OC 4GB USB Powered Risers 2 x Corsair RM850X Software: Windows 10 x64 AMD drivers 16.9.1 Miner Settings: Claymore v6.4 -dcri 25 -ethi 16 Stock settings: GPU: 1305 MHz, 1150 mV Mem: 1750 MHz, 1000 mv Speed per card: 22.1 MHs ETC, 276 MHs SC Power per card: ~130W (GPU-Z) Underclock: GPU: 800 MHz, 900 mV Mem: 1750 MHz, 800 mV Speed per card: 22 MHs ETC, 275 MHs SC Power per card: ~55W (GPU-Z) This is sweet! Title: Re: Claymore's Dual Miner: Settings and statistics Post by: Dobmader on September 17, 2016, 06:26:29 PM Question: Why my AfterBurner does not allow me to change memory clock? Win 7, Crimson 15.12 4x R9 390 (3x XFN and 1x PowerColor) Should I unlock smth in AB or what :) ? You might need to tick the Extehnd official overclocking limits and the Diable ULPS in the general setting tab. Title: Re: Claymore's Dual Miner: Settings and statistics Post by: Tilos on June 11, 2017, 07:24:04 AM Here is my Config for Dual Mining with 570RX @ 1130 CoreClock, 2050 MemClock and 1500 Straps up to 2000
Ethereum 29MH/s each Card Siacoin 460 MH/s each Card Config: -mode 0 -epool stratum+tcp://eu2.ethermine.org:4444 -ewal 0x9b70fcff8d8291dc028f2dc6ea6612e10fa6721a -eworker WhiteIce -epsw x -mport 0 -allcoins 1 -allpools 1 -dpool stratum+tcp://us-west.siamining.com:7777 -dwal 11d44524e1203f6f6accae2ab7e1a7b3720fa3b6ad840eee13ccfe479ecd23800dd7e256c323.Yo urWorkerName -dcoin sia -dcri 16 SC: GPU0 454.240 Mh/s, GPU1 464.045 Mh/s ETH: 06/11/17-08:56:37 - New job from eu2.ethermine.org:4444 ETH - Total Speed: 57.336 Mh/s, Total Shares: 30, Rejected: 0, Time: 00:39 ETH: GPU0 29.362 Mh/s, GPU1 29.274 Mh/s SC - Total Speed: 917.376 Mh/s, Total Shares: 470, Rejected: 0 SC: GPU0 453.798 Mh/s, GPU1 463.578 Mh/s GPU0 t=65C fan=88%, GPU1 t=65C fan=49% SC: 06/11/17-08:56:46 - SHARE FOUND - (GPU 0) SC: Share accepted (152 ms)! ETH: 06/11/17-08:56:46 - New job from eu2.ethermine.org:4444 ETH - Total Speed: 57.413 Mh/s, Total Shares: 30, Rejected: 0, Time: 00:39 ETH: GPU0 29.399 Mh/s, GPU1 29.014 Mh/s SC - Total Speed: 918.604 Mh/s, Total Shares: 471, Rejected: 0 SC: GPU0 454.382 Mh/s, GPU1 464.222 Mh/s SC: 06/11/17-08:56:48 - SHARE FOUND - (GPU 1) SC: Share accepted (153 ms)! ETH: 06/11/17-08:56:54 - New job from eu2.ethermine.org:4444 ETH - Total Speed: 57.406 Mh/s, Total Shares: 30, Rejected: 0, Time: 00:39 ETH: GPU0 29.420 Mh/s, GPU1 28.985 Mh/s SC - Total Speed: 918.487 Mh/s, Total Shares: 472, Rejected: 0 SC: GPU0 454.721 Mh/s, GPU1 463.766 Mh/s SC: 06/11/17-08:57:00 - SHARE FOUND - (GPU 1) SC: Share accepted (152 ms)! SC: 06/11/17-08:57:00 - SHARE FOUND - (GPU 0) SC: Share accepted (152 ms)! ETH: 06/11/17-08:57:00 - New job from eu2.ethermine.org:4444 ETH - Total Speed: 57.374 Mh/s, Total Shares: 30, Rejected: 0, Time: 00:39 ETH: GPU0 29.384 Mh/s, GPU1 29.190 Mh/s SC - Total Speed: 917.981 Mh/s, Total Shares: 474, Rejected: 0 SC: GPU0 454.141 Mh/s, GPU1 463.840 Mh/s Title: Re: Claymore's Dual Miner: Settings and statistics Post by: InTributeToDeForestKelley on December 29, 2017, 01:30:31 AM No Rig, Gamer-PC
The System is OC and watercooled R290X @CoreClock 1040MHz, MemoryClock 1250, Temp 54-56C GPU #0: Hawaii, 4096 MB available, 44 compute units ETH - Total Speed: 28.756 Mh/s, Total Shares: 138, Rejected: 0, Time: 05:22 ETH: GPU0 28.756 Mh/s DCR - Total Speed: 862.666 Mh/s, Total Shares: 821, Rejected: 12 DCR: GPU0 862.666 Mh/s |
