Bitcoin Forum

Hi guys.

I've developed the first OpenCL miner for PascalCoin fully open source and made with Pascal language.
It works using OpenCL installed drivers

Please read documentation at this post:
https://github.com/PascalCoin/PascalCoin/blob/master/HOWTO_DEVELOP_GPU_MINER_FOR_PASCALCOIN.txt

miner v2 doesn't work with windows...
gives some violation error when selection nvidia gpu's

The cuda version is shitty.
Not able to mine with all GPUs u need one for every GPU.

Hash is somewhat strange..one card reports 2000MH then the other 50MH then the 3rd 70MH the 4th 200MH the 5th 120MH.. this is crap.
The cuda version needs a lot of work.

I have it run for 24h and nothing..and the hash according to this stupid miner still not vary much on the speeds I posted for each gpu.
anyway i stop mining PASCAL coin since it has no proper nv miner yet.

Considering how high the difficulty is, it can be a very long time to find blocks (and therefore measure your real hashrate) so it's a bit of a gamble.

I give it a day then probably stop as well.

I have it run for 24h and nothing..and the hash according to this stupid miner still not vary much on the speeds I posted for each gpu.
anyway i stop mining PASCAL coin since it has no proper nv miner yet.

average time for 1500MH is 2 days already, now add to this the solo varaince and you go as high as 1 week without trouble

going solo now is a gamble

and i agree the miner is shitty that's why i asked for an improved version, i hope sp can do something

As I said in another thread:
AMD current card should remain better in pascalcoin pow algo than nvidia ones: there is some int operation in the pow algo that can be done in one cycle on amd against two for nvidia, like bitcoin pow.
Vorksholk who is used to both architecture explains this in the following post.
https://bitcointalk.org/index.php?topic=1583719.msg16621234#msg16621234

still i think 250MH for nvidia is very poor, probably amd can be improved quite a lot, and i don't own amd so i'm stuck with that miner

User called majoh claimed he reached 750 Mh/s for 1070:

https://bitcointalk.org/index.php?topic=1583719.msg16682597;topicseen#msg16682597

that post is very old, it's strange that the miner dev didn't improve anything and a stranger did it long time ago

with that speed might be worth to solo mine

The guys who thought of in order to create a pool for mining this coin. The interest is very high, but few understand how to work solo mining, the pool is very necessary.

Can anyone comment on the profitability?

Assume a card that does 500mh/s. How many Pascalcoins will be generated per day by this speed? And it will be great if someone can produce a step by step guide with screenshots or a video to guide others (both linux or windows). Thank you

12-17 coins per day.


Math time.

number_of_coins_you_mine_per_day = your_hashrate(Mh/s) / networkhashrate(Mh/s) * blocks_per_day * blockreward

Network hashrate is 835,000-1,200,000 Mh/s (source: http://explorer.pascalcoin.org), there are 288 blocks per day and the blockreward is 100.

Add that all up and you end up with 12 or 17 coins per day depending on the numbers.

Is there any active pool for this coin
and what is the hashrate for the 280x ?

I can't even start the wallet on Linux.

EDIT: Managed it, but no linux miner.

Here you go;

1) Go to this link and download wallet
https://sourceforge.net/projects/pascalcoin/

and
Go to this link and download windows binaries

https://github.com/Vorksholk/PascalCoin-OpenCL/releases/download/v1.00/PascalCoin_OpenCL_ProxyMiner_v1.zip


2) Open wallet and let it sync.. (By the time it is syncing you can do other things as follows)

3) Go to Project> Options > Set miner name (8 letters or numbers) I keep it "12121212" (btw set password for your wallet as you like)

4) On the same page.. Make sure that "JASON-PRC Server" is ticked

5) Default port is 4009 .. if you want to change it .. Change it and remember it. (I would keep it default)

6) Miner Server Private Key : Always Mine with this key  and select your "12121212" from dropdown.

7) Hit OK and go to main wallet screen

8) Tick "Explore accounts with one of my wallet keys"

9) Now Select the key 12121212 from the dropdown

10) By this time the Sync will be half way done..  Sync will take a long time (5-10 min) So give it some time

11) You should be able to See "Node Status" "Running" in green.

Now your wallet is ready ..

12) Now open "PascalProxyv2.jar" from the same folder (Give it a minute to open ; it will open in command prompt)

13) Enter desired host : 127.0.0.1  > hit enter

14) Enter desired port : 4009 (Or if you changed it before use that port)> Hit enter

15) Enter number of GPUs to support : 6 > Hit enter

16) Please enter miner prefix : 12121212 > Hit enter

17) Minimize the command prompt window

18) Now create a batch file "start.bat"

19) Edit batch file in notepad :
cd C:\Pathto your folder\PascalCoin_OpenCL_ProxyMiner_v1
PascalCoinOpenCL_ProxyMiner.exe p0 d012345 c30

20) parameter c works best for me but you can try 25-50 range; if you see hashrate too low.. then try changing this.  

My ETH address:
0x5181c3A1CBC352698747e3c9A9DCDD5194252BA1

:)

Pool is almost ready, just waiting on some final adjustments/tweaks on the miner and we're good to go.

Pool is almost ready, just waiting on some final adjustments/tweaks on the miner and we're good to go.

How much coins per day with 500 mhs ?

How much coins per day with 500 mhs ?

You can calculate it at here: http://whattomine.com/coins/172-pasc-pascal
Hash rate in kh/s

Pool is almost ready, just waiting on some final adjustments/tweaks on the miner and we're good to go.

Hi can I mine this coin with an asic bitfury? or will it be possible for the future, I hear it is sha256
Thanks for any help.

Hi can I mine this coin with an asic bitfury? or will it be possible for the future, I hear it is sha256
Thanks for any help.

Still solo mining? Cant find a pool

Pool is almost ready, just waiting on some final adjustments/tweaks on the miner and we're good to go.

If I go one page back, I'm at nastyasiangirls.org again?

Pool is almost ready, just waiting on some final adjustments/tweaks on the miner and we're good to go.

Pool is almost ready, just waiting on some final adjustments/tweaks on the miner and we're good to go.

When pool online and with miner nvidia and .bat is minable ?

none, cuda miner that works on NV is not compatible with pascal new wallet

I´ve only a slow NVIDIA Geforce 940MX in my notebook. Just wanted to try out mining with Vorksholk/PascalCoin-CUDA Miner. After setting up the whole thing, it looks like this:
https://i.imgsafe.org/a44cecaed6.png Does it have to look like this? Is it mining or not? Can´t see any hashrate....

there is a new cuda miner.... did u tried it?

https://github.com/KlausT/PascalCoin-CUDA/releases

On the nvidia cuda miner i get just Proof of work is higher than target payload can't find out why or what it means

On the nvidia cuda miner i get just Proof of work is higher than target payload can't find out why or what it means

so you found your block with an amd rig?

All NV miners have that, that is whu Cuda miner mined ZERO block so far  >:(

New version 0.2 minatore
vedi post: https://bitcointalk.org/index.php?topic=1583719.msg17574340#msg17574340





How does this different from the other miner?

I have found some blocks today but I haven't logged so I can't compare if this is normal.
Also the last block now took a lot of time to confirm lately. Looks like something is going nuts.

This might help out those who want to run several rigs off of one wallet:

How to mine PascalCoin  video tutorial

AMD GPU running minerV2 with  multiple rigs

https://s29.postimg.org/9mwuaz313/pascalthumb1.png (https://www.youtube.com/watch?v=Bjs6m35zLUs) (https://postimage.org/)

https://www.youtube.com/watch?v=Bjs6m35zLUs

also someone let me know this:
So you don't have to type it in cmd every time, set the ip with -s ###.###.#.# and the miner name with -n

still no pool for mining?

In CMD Window MINING STATUS I have: ...FOUND 1 1 ERROR
in My valid blocks found: 0

What could be this 1 ERROR ?

http://imgur.com/a/F5rDz

how many chances you have to find the block with 10 x 470 rx?

10 RX470 = 5GH/s
= less than 1 change in 1.7 days

why im getting just ~300 mhs with r9 290... same card getting ~330-350 on zec?

Hi, is there a Linux version ?
If there is i could implement it into SimpleMining OS :)

Omg srsly? Different algo..obviously you should read the first page before asking such question.

i suppose he meant why he is getting such a ridiculous small amount of hash compared to other cards (a 7970/280X does 230-400 from what i have read), the equihash reference should likely tell us that this card usually does not underperform that much

well i could also be wrong ;)

thanks for the video will now install the miner

my doubt and the wallet must be installed on each rig ?, or just one wallet, and in different rig just put -s 192.168.0. .......?

Any news for pool by ocminer suprnova ? , when launched ? .

I have 17 rx480 in 24h 0 blocks found.

One friend with 36 rx480 24h 1 block but don't apear in wallet.

Another friend with 32 rx 470 24h 0 blocks.

All with 0.2 miner in this treath.


Two days ago i mined 2 blocks in 8hours with only 8 gpus with another miner (proxyminer).

The dificulty its very high now maybe or this miner don't work good.

How much reward you get from those two mined blocks?

I have 17 rx480 in 24h 0 blocks found.

One friend with 36 rx480 24h 1 block but don't apear in wallet.

Another friend with 32 rx 470 24h 0 blocks.

All with 0.2 miner in this treath.


Two days ago i mined 2 blocks in 8hours with only 8 gpus with another miner (proxyminer).

The dificulty its very high now maybe or this miner don't work good.

100 + 100

means 200 PascalCoins ?

Hello,
 I am almost mining. My issue is starting the proxy. Not clear on how that is done. I know a .jar can be run with java. Made a batch
java -jar PascalProxyv2.jar . When I run the batch I input my host and 8digit miner name.
The same console then says The batch file cannot be found.
What batch file ? I do have start.bat in the same folder which does start the miner. The miner error crashes since the proxy is not running.
Thank if you could offer advice.
I have 4 6 card rigs all running pascalminer 0.2 but would like to try this miner out.
2 of the 4 keep crashing for no apparent reason. Th other 2 have not stopped since I first started.

Like I said in the other thread.

Based on the average difficulty I found 100% more than I should of found. However with my RX 470/480 rigs on Pascalminer 0.2, I haven't found a single block.

Either the miner software is messed up, gives incorrect speeds, RX 470/480 produce nothing but hardware errors due to modded mem straps, etc, etc.

With older GPUs like 280x there are no issues.

Like I said in the other thread.

Based on the average difficulty I found 100% more than I should of found. However with my RX 470/480 rigs on Pascalminer 0.2, I haven't found a single block.

Either the miner software is messed up, gives incorrect speeds, RX 470/480 produce nothing but hardware errors due to modded mem straps, etc, etc.

With older GPUs like 280x there are no issues.

What is your memory clock when the miner is running.
All my rx470 cards are running on low memory power state (300 mhz)

I optimized the opencl miner a little bit.  (2% - 5% expected) This is tested on an r9 280x

If anyone interested, just replace the pascalsha.cl file in the miner directory

https://ufile.io/0f267

btc: 19RgeAw8PAU7WoP6zrWGiYuD78KmUhDmRx
eth: 0x585ae8cf889282751b3c38c38a9c833d96d0dc59

happy mining  ;D

Go fuck yourself with your fucking malware

Looks good but how does your bat file read?
What cards are you using?

PascalCoinMiner.exe -p 0 -d 0,1,2,3,4 -s -n

As KlausT mentioned, CUDA JSON-RPC issues are caused by Pascalproxyv2, it doesn't send "target" param to the miner.

Now we need that shitty proxy source... or a completely new miner  ;D

Or if somebody has time he can read proxy console output and replace headeroutXX.txt with correct value for "target", currently it's 000000000 for every round...

almost 24 hours with 10 x 470 8gb, but no trace of the block, all the cards reach a speed of 575 MH,

575 x 10 = 5750 MH = 5 gh / s.

can not even 1 block?

https://i.imgur.com/p1VWbkZ.jpg


https://i.imgur.com/nY8t4yw.jpg


there is something wrong?
the wallet and opened only 1 pc,

You need 7GH currently to get 1 block a day on average. At your hashrate I wouldnt be concerned unless you havent gotten a block after 48 hours.

You need 7GH currently to get 1 block a day on average. At your hashrate I wouldnt be concerned unless you havent gotten a block after 48 hours.

Hi, how did you calculate this? Tnx.

You need 7GH currently to get 1 block a day on average. At your hashrate I wouldnt be concerned unless you havent gotten a block after 48 hours.

Current hashrate = ~2,000GH
Blocks per day = 288

1/288 * 2,000 = 6.9 GH

1070 are compute capability 6.1, you're running wrong executable, run one containing 6.1 in name.

Anyway, it's useless, proxyv2 is broken and none of shares are valid.

No way.

Vorksholk says, quote: "That's expected, the miner submits any share it finds if it fulfills a target of 24000000, which is almost 8192 times smaller than the current target."

for issue:

This error comes with each submitted share - Sending Error JSON RPC id () : Error: Proof of work is higher than target payload""

But I don't think we'll be able to mine anything when wallet keeps rejecting shares.

Anyway, you're free to try.

https://pasc.nanopool.org/ (https://pasc.nanopool.org/)
GO!!!GO!!GO!!

https://pasc.nanopool.org/ (https://pasc.nanopool.org/)
GO!!!GO!!GO!!

After 40 min mining to Nanopool my reported hashrate by the pool is just 1800 mh/s, but my miners report 6600 mh/s.

After 40 min mining to Nanopool my reported hashrate by the pool is just 1800 mh/s, but my miners report 6600 mh/s.

i start bat but i cant find my miner in nano it say:Address length must be undefined characters. Your address contains 25 characters. Please, contact support at pasc.nanopool@gmail.com
i put first adress then payment id... any help? i solve it u need to delete ur last 2 characters in deposit adress -**

the same - in Hashrate Now is hashrate only aprox 1 GPU card, not all GPUs in rig, sometime even less...

Start.bat ::

pascalcoinminer.exe -s pasc-eu1.nanopool.org:15555 -p 0 -d 0 -n 86646-64.------------------.worker/myownname@gmail.com


This works, but as others stated above hashrate of my rx480 -600mh- shown as only 100mh here.

I think we are all seeing lower hashrates by factor of 6... Right when I started mining the hashrate showed once > 1800mh for me.. then stable at my mining rate/6

I think it has to do with difficulty set by nanopool.. Just the reporting is wrong. If we think of coins collected.. that rate seems alright to me.
2 coins in last hour = 48 coins / day = 100 coin ~ block a day of solo mining with my 12 RX480s .. Sounds alright.

UPDATE:
The rates are showing correct now .. :)

I think we are all seeing lower hashrates by factor of 6... Right when I started mining the hashrate showed once > 1800mh for me.. then stable at my mining rate/6

I think it has to do with difficulty set by nanopool.. Just the reporting is wrong. If we think of coins collected.. that rate seems alright to me.
2 coins in last hour = 48 coins / day = 100 coin ~ block a day of solo mining with my 12 RX480s .. Sounds alright.

UPDATE:
The rates are showing correct now .. :)

now price will go down... i lose today 2000$ on trading with this shit coin it's worse than zec...

blame the coin, obviously!

i blame myself not coin...

For me it works without the -64

Can someone send me a wallet ;D

Can someone send me a wallet ;D

What does this mean?

08:18:21 Error Deleting a Pending response message id:7 method:miner-authorize

Some of my machines randomly go into "Not Mining" mode on all cards. Anybody have any clue why?

Pool connection problem. Same with my rigs.

if it is address from Poloniex type only Payload address without -64

Please example  ???

pascalcoinminer.exe -s pasc-eu1.nanopool.org:15555 -p 0 -d 0,1,2,3,4,5 -n <account_number>.<payload>.<rig_name>/my@email.com

for me :
pascalcoinminer.exe -s pasc-eu1.nanopool.org:15555 -p 0 -d 0,1,2,3,4,5 -n 86646.1b5242db8641a139.r1/my@email.com

I cant get any payments. Still pending

Nanopool payout is set to 5 PASC now.

Mine still showing "Minimum payout is 2 PASC"

Hello guys,

 Does not miner work with hawaii? My R9 390x are not recognized, only RX 470 and RX 480.

Same problem with r9 390.

I solved by changing -p from 0 to 2.
Try changing to 1, 2 ...

I solved by changing -p from 0 to 2.
Try changing to 1, 2 ...

If I have a farm with different cards, it will help?

i blame myself not coin...

Anyone able to give me an idea on how long it takes for Nanopool to show your stats?  I pointed a rig there and not seeing anything when I try to look up my payment ID (Payload).

when you make your first share

And how long does that take?  I've been mining for an hour at 4k MH/s and still not showing.

About 20 minutes is what it took me with 2 480's.

However it takes 6 hours to get accurate stats to display.

Yeah I've been mining for over an hour and nothing when I look up stats.  Saying account not found.

Are you using Poloniex?
You have to remove the "-64" part from the address, and run it like this:
-n poloniexwalletaddress.paymentID.OPTIONALworkername

Yes I am. I will try that, thank you.

Yes I am. I will try that, thank you.

30min. Paste only payload addres.

MY VALID BLOCKS FOUND: 63 Working time: 0d 00:56:38

Still nothing.

86646.3a7fa8840738355c

I think we are all seeing lower hashrates by factor of 6... Right when I started mining the hashrate showed once > 1800mh for me.. then stable at my mining rate/6

I think it has to do with difficulty set by nanopool.. Just the reporting is wrong. If we think of coins collected.. that rate seems alright to me.
2 coins in last hour = 48 coins / day = 100 coin ~ block a day of solo mining with my 12 RX480s .. Sounds alright.

UPDATE:
The rates are showing correct now .. :)


Another UPDATE:
The rates are fuk*ed up .. Plot is messed up.

That is exactly what I'm doing.

  Nothing comes up for 3a7fa8840738355c

Which drivers are the best for this miner, cause I can't find info about it :(

I'm using version 16.11.3

RX 470  ~475 MH/s
RX 480  ~610 MH/s
R9 390x ~640 MH/s
R9 390  ~620 MH/s
R9 280x ~430 MH/s

I have try everything :

Change nanopool server / change name of worker / change wallet / restart rig, nothing is showing up. 2 of rigs are mining, 1 rest. Whyyyy nanopool, whyyyy?

There is a modified version of miner on nanopool, make sure that download page says modified nanopool miner
https://github.com/nanopool/PascalCoin/releases

@rlong011
Use -p 0 for Gpu mining

There is a modified version of miner on nanopool, make sure that download page says modified nanopool miner
https://github.com/nanopool/PascalCoin/releases

@rlong011
Use -p 0 for Gpu mining

I get this, this works correctly for my R9 280x's but this rig has 5x RX 480's, are you runninbg 480's.
C:\PascalCoinMiner.-.v1.0.0a>Pascalcoinminer.exe -s pasc-us-west1.nanopool.org:15555 -p 0 -d 0,1,2,3,4 -n 86646-64.mypoloid.miner3/rlong011@verizon.net
Invalid device 2. Valid values: 0..1

I used their download.  Tried different servers.  Nothing.

so .. can someone compile the pallas version of cuda miner???? for windows??? i don't have the gear to,,,,

What kind of gear you don't have?

https://pasc.suprnova.cc (https://pasc.suprnova.cc) ONLINE
updated sgminer with pascal support at your service! ;D

280X - 550Mh
470 - 620MH

All stable so far

The miner runs good with NV too.Just CPU usage is not so good.
But hell yeah..nvidia rocks..

one GTX1080 is doing 1.2GH+ :-D eat that AMD lovers :-D

The miner runs good with NV too.Just CPU usage is not so good.
But hell yeah..nvidia rocks..

one GTX1080 is doing 1.2GH+ :-D eat that AMD lovers :-D

Lol, the logic of some people on these forums is quite interesting. Please explain how a 2x470 that costs $340 and hashes 1.3GH is so much better than one 1080 that costs $600 and does 1.2GH???

I can buy almost twice the hashpower, or ROI twice as fast with AMD cards than nvidia...but yes those big hash numbers are everything even though it makes no mining sense.

here is linux miner with 470s...got it up to nearly 700MH not bad.

https://i.imgur.com/AK7Vyq3.png

Suprnova has an sgminer.

Suprnova has an sgminer.

can i mine on windows pc ?

can i mine on windows pc ?

5 x 470 8gb

https://i.imgur.com/4XFY2RC.jpg

I use the poloniex address is Suprnova edit account
But I still have to receive the first payment, I do not know what time to be confirmed

This 470 4gb or 8gb ???
My 470 4gb 610 m/h

because you need to compare $200 x 2(470) to $400 for a 1070 with the CUDA miner which will be even faster, $170 for a 470 is not in all the place of the world

lol not sure where you looking at prices for 470s. The best 470 for mining is right here and currently its at 165 (155 if you count the rebate).

https://www.newegg.com/Product/Product.aspx?Item=N82E16814202230

You can even grab the powercolor for 155 (135 after rebate) if your fine with a slightly less clocked GDDR5

how much time does it take for supernova pascal to get confirmed its still unconfirmed after a day or so?!

Its possible up to 1 ghs with nvidia gtx 1070 with overclock i think .

but payments on Suprnova you must manually request for pascalcoin?

but payments on Suprnova you must manually request for pascalcoin?

that's not the worldwide price, in other country the real value is much higher, around 200 euro

nevermind i clicked after my post, and you were talking about reference...i never take in consideration reference card, they are plain bad with their shitty cooling...

Yes it is, 1ghz quite easily, the issue is that for me the sg miner does not work when i have multiple gpus in one rig. So i can only run it on my pc.

I'm seeing that pascalcoin is dying every minute

I'm seeing that pascalcoin is dying every minute

may I ask what the best AMD GPU miner is to use with nano pool?

thanks

Can we still solo with sgminer 5.5. I cant seem to get it to connect with wallet. Ideas!?!?

The miner runs good with NV too.Just CPU usage is not so good.
But hell yeah..nvidia rocks..

one GTX1080 is doing 1.2GH+ :-D eat that AMD lovers :-D