PascalCoin OpenCL mining

[marvykkio]

1070 are compute capability 6.1, you're running wrong executable, run one containing 6.1 in name.

Anyway, it's useless, proxyv2 is broken and none of shares are valid.

and how can I use the gtx for pascalcoin

[palgin]

No way.

Vorksholk says, quote: "That's expected, the miner submits any share it finds if it fulfills a target of 24000000, which is almost 8192 times smaller than the current target."

for issue:

This error comes with each submitted share - Sending Error JSON RPC id () : Error: Proof of work is higher than target payload""

But I don't think we'll be able to mine anything when wallet keeps rejecting shares.

Anyway, you're free to try.

[IOTUSA]

No way.

Vorksholk says, quote: "That's expected, the miner submits any share it finds if it fulfills a target of 24000000, which is almost 8192 times smaller than the current target."

for issue:

This error comes with each submitted share - Sending Error JSON RPC id () : Error: Proof of work is higher than target payload""

But I don't think we'll be able to mine anything when wallet keeps rejecting shares.

Anyway, you're free to try.

No reason to mine Pascal now that the huge instamine period and Polo pump and dump is coming to an end.

[marvykkio]

i'm back zcash

[persiansstuff]

I'm mining with almost 8GH for 24 hours now and still no luck

 

[tlmoscow]

https://pasc.nanopool.org/
GO!!!GO!!GO!!

[Amph]

https://pasc.nanopool.org/
GO!!!GO!!GO!!

no nvidia miner

[ZipEyes]

I can see my 290 hashes at 520MH/s at nanopool but it reset itself often. Wonder why so?

http://imgur.com/a/Wd83X

[velbet]

how can we setup nanopool miner i couldnt understand

[patientx]

pascalcoinminer.exe -s pasc-eu1.nanopool.org:15555 -p 0 -d 0 -n *****-**.++++++++++.worker/xyz@yourmail.com


*****-** : deposit address in poloniex or other marketplace
++++++++++ : Your PascalCoin Payload in poloniex or other marketplace

I am not sure %100 though. Other might need to verify this.

[benekiki]

https://pasc.nanopool.org/
GO!!!GO!!GO!!

After 40 min mining to Nanopool my reported hashrate by the pool is just 1800 mh/s, but my miners report 6600 mh/s.

[Thin86cz]

Can you post how your start.bat is looking?

[minerrr]

i start bat but i cant find my miner in nano it say:Address length must be undefined characters. Your address contains 25 characters. Please, contact support at pasc.nanopool@gmail.com
i put first adress then payment id... any help? i solve it u need to delete ur last 2 characters in deposit adress -**

[miropp]

https://pasc.nanopool.org/
GO!!!GO!!GO!!

After 40 min mining to Nanopool my reported hashrate by the pool is just 1800 mh/s, but my miners report 6600 mh/s.

the same - in Hashrate Now is hashrate only aprox 1 GPU card, not all GPUs in rig, sometime even less...

[Tmdz]

https://pasc.nanopool.org/
GO!!!GO!!GO!!

After 40 min mining to Nanopool my reported hashrate by the pool is just 1800 mh/s, but my miners report 6600 mh/s.

Same over here, i have very low hashrate, i know it will vary depending on shares found but the gap is way too big.

Something funky going on with this modified amd miner.

It is a modified version of .2 of the miner, that might be the issue.

[miropp]

i start bat but i cant find my miner in nano it say:Address length must be undefined characters. Your address contains 25 characters. Please, contact support at pasc.nanopool@gmail.com
i put first adress then payment id... any help? i solve it u need to delete ur last 2 characters in deposit adress -**

if it is address from Poloniex type only Payload address without -64

[charles2k]

https://pasc.nanopool.org/
GO!!!GO!!GO!!

After 40 min mining to Nanopool my reported hashrate by the pool is just 1800 mh/s, but my miners report 6600 mh/s.

the same - in Hashrate Now is hashrate only aprox 1 GPU card, not all GPUs in rig, sometime even less...

same situation.
Also many messages:  Info Received response method:miner-submit JSON:{"id":48,"result":{},"error":null}

[patientx]

Start.bat ::

pascalcoinminer.exe -s pasc-eu1.nanopool.org:15555 -p 0 -d 0 -n 86646-64.------------------.worker/myownname@gmail.com


This works, but as others stated above hashrate of my rx480 -600mh- shown as only 100mh here.

[maxmad_x]

Start.bat ::

pascalcoinminer.exe -s pasc-eu1.nanopool.org:15555 -p 0 -d 0 -n 86646-64.------------------.worker/myownname@gmail.com


This works, but as others stated above hashrate of my rx480 -600mh- shown as only 100mh here.

I think we are all seeing lower hashrates by factor of 6... Right when I started mining the hashrate showed once > 1800mh for me.. then stable at my mining rate/6

I think it has to do with difficulty set by nanopool.. Just the reporting is wrong. If we think of coins collected.. that rate seems alright to me.
2 coins in last hour = 48 coins / day = 100 coin ~ block a day of solo mining with my 12 RX480s .. Sounds alright.

UPDATE:
The rates are showing correct now ..


Another UPDATE:
The rates are fuk*ed up .. Plot is messed up.

[ol92]

Start.bat ::

pascalcoinminer.exe -s pasc-eu1.nanopool.org:15555 -p 0 -d 0 -n 86646-64.------------------.worker/myownname@gmail.com


This works, but as others stated above hashrate of my rx480 -600mh- shown as only 100mh here.

I think we are all seeing lower hashrates by factor of 6... Right when I started mining the hashrate showed once > 1800mh for me.. then stable at my mining rate/6

I think it has to do with difficulty set by nanopool.. Just the reporting is wrong. If we think of coins collected.. that rate seems alright to me.
2 coins in last hour = 48 coins / day = 100 coin ~ block a day of solo mining with my 12 RX480s .. Sounds alright.

UPDATE:
The rates are showing correct now ..

For me it works without the -64