Bitcoin Forum

Alternate cryptocurrencies => Mining (Altcoins) => Topic started by: MrN1ce9uy on June 10, 2017, 12:53:50 PM



Title: Sapphire Nitro+ RX 570 8GB Ether Hashrate
Post by: MrN1ce9uy on June 10, 2017, 12:53:50 PM
So I got my Sapphire Nitro+ RX 570 8GB (Micron) in yesterday and after watching this video (http://curvetube.com/BIOS_Mod_Sapphire_Pulse_RX570_8G_MICRON_for_Ethereum_AMD_Radeon_GPU_Mining/HYh3H3-OOHA.video) I was able to change the straps to 1750. I know he's using the PULSE, but from what I can tell the PULSE is the same card but with only a single 8-pin and lower core clock. He's getting higher hashrate from the simple changing of the straps. He's getting 29MH/s while I'm only getting 27MH/s even at the same memory clock of 2175MHz, I can't get to 28MH/s.

That's funny because all my other RX4xx/5xx cards are 4GB and none can go over 2000MHz without memory errors yet they can all do 27MH/s with 1750 straps. I also tried using Anorak's Samsung Micron memshift 1500 but crashed the system when I OC'd to 2000MHz memory, never seeing 27MH/s. https://anorak.tech/t/sapphire-rx-570-nitro/5332

I'd like to think at 2175MHz this card could get 29MH/s. Any help would be appreciated.


Title: Re: Sapphire Nitro+ RX 570 8GB Ether Hashrate
Post by: MrN1ce9uy on June 12, 2017, 12:18:48 AM
I just flashed back to original BIOS and I am getting the same hashrate when overclocking memory 27MH/s on original BIOS. Is this normal?


Title: Re: Sapphire Nitro+ RX 570 8GB Ether Hashrate
Post by: dicemond on June 12, 2017, 04:20:06 AM
I'm mining with this card (Sapphire Nitro+ RX570 8GB, Micron's memmory) at 26.8 MH/s.
I can't get more higher speed althrough overclocked (1133/2175) and modded (copy 2:2000 to 2:2250 and 2:1750 to 2:2000 timing strap)
Any ideals?


Title: Re: Sapphire Nitro+ RX 570 8GB Ether Hashrate
Post by: MrN1ce9uy on June 12, 2017, 11:47:22 AM
I'm mining with this card (Sapphire Nitro+ RX570 8GB, Micron's memmory) at 26.8 MH/s.
I can't get more higher speed althrough overclocked (1133/2175) and modded (copy 2:2000 to 2:2250 and 2:1750 to 2:2000 timing strap)
Any ideals?

That's actually what I'm getting now, after I saw GPU memory errors in HWInfo popping up. Backed down to 2100MHz and that's where I'm running it now, get's 1 or 2 memory errors a day and 26.8MH/s.


Title: Re: Sapphire Nitro+ RX 570 8GB Ether Hashrate
Post by: Mattthev on June 12, 2017, 02:24:17 PM
Two words: Performance timings.


Title: Re: Sapphire Nitro+ RX 570 8GB Ether Hashrate
Post by: daemonfox on June 12, 2017, 02:39:02 PM
Two words: Performance timings.

A few more words... NOT ALL CHIPS ARE BINNED EQUALLY!

I have been lucky enough to come across SEVERAL Sapphire boards from all generations since the 7000 series that were GOLD chips... always clocked and mined higher than almost any posts you find here.

But this year has shown me that luck will not always be there.

We own 9 R9 390 OC Nitros and 3 of them run like screaming demons covered in permafrost at 33+MH/s on ETH and 29+ with 430 on PASC dual mining @ 1200/1800. 4 run average and stick at or just under 70C and above average OC/hashrate, can get 1175/1750 stable and 32+ or 28/425 dual. 2 are just fucking scary and I cant keep their temps low or clock them up at all... even for basic gaming. They went into the kids PCs to hash alone when not in use but still get close to 80C in the A/C ugh, they keep stock temps and zero extra power and still hit 28MH/s and 26/375 dual. On ZCASH, they run cooler but only get a little over 400 sols/s which is not as profitable.

We own 3 EVGA Geforce GTX 1080 TI FE cards and two of them act like they do not know what 70C even is... hash at ~750 sols/s each. The third is scary though, and it runs 10C hotter than the other two. All three were purchased at the same time and arrived at the same time but 1 was definitely a lower binned chip. It hashes slower when compared to the other two, even when I run it in the direct A/C and keep it under 75C.

Sometimes, some cards of the same version are just better than others. That is what binning is for... to find the best chips for each tier of card being produced.


Title: Re: Sapphire Nitro+ RX 570 8GB Ether Hashrate
Post by: Mattthev on June 12, 2017, 03:06:54 PM
Two words: Performance timings.

A few more words... NOT ALL CHIPS ARE BINNED EQUALLY!

I have been lucky enough to come across SEVERAL Sapphire boards from all generations since the 7000 series that were GOLD chips... always clocked and mined higher than almost any posts you find here.

But this year has shown me that luck will not always be there.

We own 9 R9 390 OC Nitros and 3 of them run like screaming demons covered in permafrost at 33+MH/s on ETH and 29+ with 430 on PASC dual mining @ 1200/1800. 4 run average and stick at or just under 70C and above average OC/hashrate, can get 1175/1750 stable and 32+ or 28/425 dual. 2 are just fucking scary and I cant keep their temps low or clock them up at all... even for basic gaming. They went into the kids PCs to hash alone when not in use but still get close to 80C in the A/C ugh, they keep stock temps and zero extra power and still hit 28MH/s and 26/375 dual. On ZCASH, they run cooler but only get a little over 400 sols/s which is not as profitable.

We own 3 EVGA Geforce GTX 1080 TI FE cards and two of them act like they do not know what 70C even is... hash at ~750 sols/s each. The third is scary though, and it runs 10C hotter than the other two. All three were purchased at the same time and arrived at the same time but 1 was definitely a lower binned chip. It hashes slower when compared to the other two, even when I run it in the direct A/C and keep it under 75C.

Sometimes, some cards of the same version are just better than others. That is what binning is for... to find the best chips for each tier of card being produced.
I'm not talking about R9 series...
I won't even bother to react on this.

Just say that every card hashrates can be improved only with performance timings. Copying straps isn't the way! And properly mod bios can make it a lot better.


Title: Re: Sapphire Nitro+ RX 570 8GB Ether Hashrate
Post by: daemonfox on June 12, 2017, 03:58:34 PM
Two words: Performance timings.

A few more words... NOT ALL CHIPS ARE BINNED EQUALLY!

I have been lucky enough to come across SEVERAL Sapphire boards from all generations since the 7000 series that were GOLD chips... always clocked and mined higher than almost any posts you find here.

But this year has shown me that luck will not always be there.

We own 9 R9 390 OC Nitros and 3 of them run like screaming demons covered in permafrost at 33+MH/s on ETH and 29+ with 430 on PASC dual mining @ 1200/1800. 4 run average and stick at or just under 70C and above average OC/hashrate, can get 1175/1750 stable and 32+ or 28/425 dual. 2 are just fucking scary and I cant keep their temps low or clock them up at all... even for basic gaming. They went into the kids PCs to hash alone when not in use but still get close to 80C in the A/C ugh, they keep stock temps and zero extra power and still hit 28MH/s and 26/375 dual. On ZCASH, they run cooler but only get a little over 400 sols/s which is not as profitable.

We own 3 EVGA Geforce GTX 1080 TI FE cards and two of them act like they do not know what 70C even is... hash at ~750 sols/s each. The third is scary though, and it runs 10C hotter than the other two. All three were purchased at the same time and arrived at the same time but 1 was definitely a lower binned chip. It hashes slower when compared to the other two, even when I run it in the direct A/C and keep it under 75C.

Sometimes, some cards of the same version are just better than others. That is what binning is for... to find the best chips for each tier of card being produced.
I'm not talking about R9 series...
I won't even bother to react on this.

Just say that every card hashrates can be improved only with performance timings. Copying straps isn't the way! And properly mod bios can make it a lot better.

The R9 was just my recent example. It applies to all GPU chips.


Title: Re: Sapphire Nitro+ RX 570 8GB Ether Hashrate
Post by: MrN1ce9uy on June 12, 2017, 09:44:56 PM
I understand what you all are saying, some chips can't clock as high as others; but I would think the same chip at the same clock rate with the same memory and timings should perform the same.


Title: Re: Sapphire Nitro+ RX 570 8GB Ether Hashrate
Post by: daemonfox on June 12, 2017, 11:00:07 PM
I understand what you all are saying, some chips can't clock as high as others; but I would think the same chip at the same clock rate with the same memory and timings should perform the same.

And experience dealing with multiple GPUs of the same brand and model, no that is not as true as you would hope to believe.


Title: Re: Sapphire Nitro+ RX 570 8GB Ether Hashrate
Post by: Mattthev on June 13, 2017, 07:20:55 AM
I understand what you all are saying, some chips can't clock as high as others; but I would think the same chip at the same clock rate with the same memory and timings should perform the same.
No, there will be always some % difference but not much. Let's say one has 30MH/s the other would have 30.5MH/s and third have 29.5MH/s... There are some really bad cards, but the chance you will have it is almost 0.


Title: Re: Sapphire Nitro+ RX 570 8GB Ether Hashrate
Post by: minerudinperu on June 13, 2017, 03:22:07 PM
So I got my Sapphire Nitro+ RX 570 8GB (Micron) in yesterday and after watching this video (http://curvetube.com/BIOS_Mod_Sapphire_Pulse_RX570_8G_MICRON_for_Ethereum_AMD_Radeon_GPU_Mining/HYh3H3-OOHA.video) I was able to change the straps to 1750. I know he's using the PULSE, but from what I can tell the PULSE is the same card but with only a single 8-pin and lower core clock. He's getting higher hashrate from the simple changing of the straps. He's getting 29MH/s while I'm only getting 27MH/s even at the same memory clock of 2175MHz, I can't get to 28MH/s.

That's funny because all my other RX4xx/5xx cards are 4GB and none can go over 2000MHz without memory errors yet they can all do 27MH/s with 1750 straps. I also tried using Anorak's Samsung Micron memshift 1500 but crashed the system when I OC'd to 2000MHz memory, never seeing 27MH/s. https://anorak.tech/t/sapphire-rx-570-nitro/5332

I'd like to think at 2175MHz this card could get 29MH/s. Any help would be appreciated.



I also would like to make two rigs with this type of video card, what would be your personal recommendation for the other components, like mother board, processor, ram, power supply and hdd, I would like to add 5 video cards / rig.

Thank you in advance!

Peace and prosperity!


Title: Re: Sapphire Nitro+ RX 570 8GB Ether Hashrate
Post by: manna4all on August 19, 2017, 02:08:29 AM
So I got my Sapphire Nitro+ RX 570 8GB (Micron) in yesterday and after watching this video (http://curvetube.com/BIOS_Mod_Sapphire_Pulse_RX570_8G_MICRON_for_Ethereum_AMD_Radeon_GPU_Mining/HYh3H3-OOHA.video) I was able to change the straps to 1750. I know he's using the PULSE, but from what I can tell the PULSE is the same card but with only a single 8-pin and lower core clock. He's getting higher hashrate from the simple changing of the straps. He's getting 29MH/s while I'm only getting 27MH/s even at the same memory clock of 2175MHz, I can't get to 28MH/s.

That's funny because all my other RX4xx/5xx cards are 4GB and none can go over 2000MHz without memory errors yet they can all do 27MH/s with 1750 straps. I also tried using Anorak's Samsung Micron memshift 1500 but crashed the system when I OC'd to 2000MHz memory, never seeing 27MH/s. https://anorak.tech/t/sapphire-rx-570-nitro/5332

I'd like to think at 2175MHz this card could get 29MH/s. Any help would be appreciated.

Were you able to make improvements? I have the same card but can't go beyond 26MH/s.


Title: Re: Sapphire Nitro+ RX 570 8GB Ether Hashrate
Post by: spectune on August 19, 2017, 02:06:07 PM
Have the Nitro+ RX570 too, but with 4GB - with Hynix RAM.
Used the stripe from bughatti or Ubermix 3.1 (the same) from 1625 up and reduced voltage to 900mV. Depending on your miner used you get different hashrates. The best rate I got actually with the newest Claymore 9.8 version is 29,8Mh/s - by using the new AMD beta driver(called Radeon Crimson relive Edition Beta for [Suspicious link removed]pute) on Windows 10. With Ethos(Linux based miner) I got only 26,6Mh/s. Another parameter impacting the hashrate is the RAM-type - Elpida slower, Hynix fast, Samsung fastest.
Optimize GPU and Mem-Clock - I got the best results with: GPU - 1170 Mhz / MEM - 2080 Mhz. Check the best values for you with MSI-Afterburner. Keep in mind that you need the atik-mdagpatcher, if your BIOS is changed or the new AMD-Beta-Driver is used.
Hope that helps to get better rates out.


Title: Re: Sapphire Nitro+ RX 570 8GB Ether Hashrate
Post by: angel9898 on September 19, 2017, 07:47:58 AM
I release my stable version of RX 570 8GB
Hynix Memory
Sapphire Nitro +

http://www97.zippyshare.com/v/qIiJ4tUg/file.html


I use this Claymore 10 settings "-cclock 1340 -mclock 1750" and undervolt -96, for about 30.8MH/s ~ 31.0MH/s Eth and Dcr 616.462 Mh/s dual mining.....with no memory errors and securely 60°C - 65°C 24/7.

https://imgur.com/a/cecSA

https://imgur.com/a/Ojav8

Use it freely, but I'd appreciate some ETH donation.

If for some reason you can't flash this BIOS, just extract 1750 strap and replace your original from 1750 to 2000 strap, then increase MEM max frequency to 1750 Default and Clock 1340 and flash it.


Title: Re: Sapphire Nitro+ RX 570 8GB Ether Hashrate
Post by: menulius on October 29, 2017, 09:09:33 PM
Hi, I have the same problem. My out of the box rx 570 sapphire nitro + 8gb has only 18.** Mh/s hash rate only.

My GPU has Hynix memory with Bus width 256 Bit.

GPU  I've modified bios copying strip 1750 to 2000, using the latest blockchain drivers 17.30.1029, Afterburner 4.4.0 beta 16 and manage to increase my hash rate to 24.** Mh/s. Any ideas how can I push hashrate to at least 29 Mh/s?


Title: Re: Sapphire Nitro+ RX 570 8GB Ether Hashrate
Post by: hagbase on October 29, 2017, 09:11:15 PM
https://github.com/jaschaknack/PolarisBiosEditor


Title: Re: Sapphire Nitro+ RX 570 8GB Ether Hashrate
Post by: menulius on October 29, 2017, 09:16:25 PM
https://github.com/jaschaknack/PolarisBiosEditor

Thanks for your reply. As I've mentioned previously, I've already modified my bios replacing 1750 to 2000 using polaris app and ran atikmdag-patcher. That's how I've increased my hashrate from 18 to 24 Mhs


Title: Re: Sapphire Nitro+ RX 570 8GB Ether Hashrate
Post by: Vann on October 29, 2017, 09:37:22 PM
You need to overclock the cards to maximize the hash rate. Try setting the core clock to 1200 MHz and memory to 2000 MHz in Afterburner. You can also undervolt the core to -100 mV and set the power limit to -15% to save power.


Title: Re: Sapphire Nitro+ RX 570 8GB Ether Hashrate
Post by: menulius on October 29, 2017, 09:47:28 PM
You need to overclock the cards to maximize the hash rate. Try setting the core clock to 1200 MHz and memory to 2000 MHz in Afterburner. You can also undervolt the core to -100 mV and set the power limit to -15% to save power.

I've tried that already, sorry didn't mention this earlier. So basically every time I try to increase memory clock and/or decrease clock speed, my hash rate slightly drops. Not sure whether its due to changes I've made or there is actually something changes. I've tried 1200/2000, 1250/2150 etc, but in any case hash rate just drops.

Afterburner works perfectly fine on my gtx 1070 and increase hash rate significantly but does not have any positive effect on my rx570 :(


Title: Re: Sapphire Nitro+ RX 570 8GB Ether Hashrate
Post by: Vann on October 29, 2017, 09:54:42 PM
You need to overclock the cards to maximize the hash rate. Try setting the core clock to 1200 MHz and memory to 2000 MHz in Afterburner. You can also undervolt the core to -100 mV and set the power limit to -15% to save power.

I've tried that already, sorry didn't mention this earlier. So basically every time I try to increase memory clock and/or decrease clock speed, my hash rate slightly drops. Not sure whether its due to changes I've made or there is actually something changes. I've tried 1200/2000, 1250/2150 etc, but in any case hash rate just drops.

Afterburner works perfectly fine on my gtx 1070 and increase hash rate significantly but does not have any positive effect on my rx570 :(


Reboot and try again. Sometimes Afterburner won't change the clocks after they were set once. I would also try the Polaris Bios Editor v1.63 'one click timing patch' performance timings on the original Bios and see if it improves. With the PBE performance timings and an overclock you should get at least 28.5 MH/s.


Title: Re: Sapphire Nitro+ RX 570 8GB Ether Hashrate
Post by: StephdeLyon on November 17, 2017, 07:21:40 PM
I release my stable version of RX 570 8GB
Hynix Memory
Sapphire Nitro +

http://www97.zippyshare.com/v/qIiJ4tUg/file.html


I use this Claymore 10 settings "-cclock 1340 -mclock 1750" and undervolt -96, for about 30.8MH/s ~ 31.0MH/s Eth and Dcr 616.462 Mh/s dual mining.....with no memory errors and securely 60°C - 65°C 24/7.

https://imgur.com/a/cecSA

https://imgur.com/a/Ojav8

Use it freely, but I'd appreciate some ETH donation.

If for some reason you can't flash this BIOS, just extract 1750 strap and replace your original from 1750 to 2000 strap, then increase MEM max frequency to 1750 Default and Clock 1340 and flash it.


hi Angel,
when i look at your modded bios , you changed the 1750+ timings , did you take them from another card ?
i saw these timings elsewhere but i didnt remind the card.

i think you overclocked your card 1750mhz for 30mhs is not possible ? 2100 ? 2200 ?

thank you ;-)


Title: Re: Sapphire Nitro+ RX 570 8GB Ether Hashrate
Post by: serendipity969 on December 08, 2017, 09:17:34 AM
I have RX570 Nitro + Oc OC 8Gb Samsung  and my h rate is about 27 Mh/s. Have someone some bios ti improve hrate ?


Title: Re: Sapphire Nitro+ RX 570 8GB Ether Hashrate
Post by: nathan0658@gmail.com on December 10, 2017, 07:01:21 PM
I have RX570 Nitro + Oc OC 8Gb Samsung  and my h rate is about 27 Mh/s. Have someone some bios ti improve hrate ?

I have the exact same card and memory as you.

I did a Polaris one click flash and I am at 29Mh/s. I think my overclock settings applied to this card since I have a .bat file to run after a restart.

Trying to find someone to teach me so I can learn this process a little faster myself or get reassurance I am doing it correctly.



Title: Re: Sapphire Nitro+ RX 570 8GB Ether Hashrate
Post by: rleffers on December 21, 2017, 06:17:29 AM
Granted I am very new at this but I am only getting 18mh frommy rx 570 8gb. new rig just set up today. love any tips thanks!


Title: Re: Sapphire Nitro+ RX 570 8GB Ether Hashrate
Post by: skitzion on January 19, 2018, 02:30:34 AM
Granted I am very new at this but I am only getting 18mh frommy rx 570 8gb. new rig just set up today. love any tips thanks!

Hi, I have some rx570 8gb.
Tell me if they are hynix samsung micron ...
You can check how with the software gpuz.
What about your driver ? adrenalin , beta blockchain ?


Title: Re: Sapphire Nitro+ RX 570 8GB Ether Hashrate
Post by: MrN1ce9uy on February 28, 2018, 02:45:40 AM
A few days ago I bought a Rx 580 Sapphire 8 Gb card, but at the time of mining it only reaches 18.5 Mh / s and I would like it to reach at least 27 Mh / s. What should I do?

The motherboard that I use is a Msi Z270 SLI with 8Gb of RAM. I'm mining with Claymore and using the latest MSI afterburner. I would really appreciate it if you guys can help me with anything, if I need to change some of the equipment or should I install something additional?

Thank you very much for just reading this message...

Jose

You will have to flash a modified bios and use either the compute workload in AMD settings or the blockchain driver from AMD. I don't have the time or energy to give you a tutorial/guide; but there are plenty out there if you search.


Title: Re: Sapphire Nitro+ RX 570 8GB Ether Hashrate
Post by: unc0nnected on March 02, 2018, 07:26:44 PM
I'll join the fray here as I'm seeing some odd behavior out of my Nitro+ this week.    I got the card last week, flashed the rom and was pleasantly surprised to see the hash rate get up to around 31 MH/s so I let it alone and went on my way.  Fast forward a week and this card is unable to get over 18.75 MH/s, at some point along the way it just dropped down there and stays there.   It's set to compute mode but the crazy thing is that when I set it to graphics mode and reboot the hash doesn't drop at all, it just stays at 18.5 -18.77 MH/s.  I switch it back to compute, reboot and it's at the same rate.  I've flashed back to the original rom and sure enough the hash rate stays exactly the same, 18.5 - 18.75.  Flash back to the rom that got me up to 31 MH/s and the results are the same, 18.5 - 18.75 MH/s.

Running on a B250 Mining Expert with 6 other 570's, 3 gpu's on one PSU, 4 on another with power to spare.  8GB of dd4 ram, a 64GB swap file sitting on a nice fast SSD, all powered by an intel 4400 cpu.  Would love some advice if anyone has any


Title: Re: Sapphire Nitro+ RX 570 8GB Ether Hashrate
Post by: zeebog on March 10, 2018, 09:36:02 PM
I'll join the fray here as I'm seeing some odd behavior out of my Nitro+ this week.    I got the card last week, flashed the rom and was pleasantly surprised to see the hash rate get up to around 31 MH/s so I let it alone and went on my way.  Fast forward a week and this card is unable to get over 18.75 MH/s, at some point along the way it just dropped down there and stays there.   It's set to compute mode but the crazy thing is that when I set it to graphics mode and reboot the hash doesn't drop at all, it just stays at 18.5 -18.77 MH/s.  I switch it back to compute, reboot and it's at the same rate.  I've flashed back to the original rom and sure enough the hash rate stays exactly the same, 18.5 - 18.75.  Flash back to the rom that got me up to 31 MH/s and the results are the same, 18.5 - 18.75 MH/s.

Running on a B250 Mining Expert with 6 other 570's, 3 gpu's on one PSU, 4 on another with power to spare.  8GB of dd4 ram, a 64GB swap file sitting on a nice fast SSD, all powered by an intel 4400 cpu.  Would love some advice if anyone has any


I have 6 of exactly the same cards running at 30.5 stable for 6 weeks now. Stock bios with AMD Radeon should improve from 18 (stock) to 24 easely. After flashing the modded bios again, did you run the atikmdag-patcher and reboot before trying out the hash rate? Also double check in AMD Radeon if the card is actually on compute. 2 of my cards were stubborn, well AMD was stubborn I guess, had to set them to compute in AMD a few times and reboot one by one before they went to compute status. If you tried all of this already, flash stock bios, reinstall AMD: run DDU (I think you must uninstall the current AMD driver first) and reinstall your AMD driver of choice.
Then set you card to compute first and see if it is ok now.
That's what I would do first to try and fix this, but I'm also new at this game, and it takes an hour, maybe 2 to do all this.

But hopefully you fixed it already since your post is already a week old. Good luck.




Title: Re: Sapphire Nitro+ RX 570 8GB Ether Hashrate
Post by: zeebog on March 10, 2018, 09:44:51 PM
I'll join the fray here as I'm seeing some odd behavior out of my Nitro+ this week.    I got the card last week, flashed the rom and was pleasantly surprised to see the hash rate get up to around 31 MH/s so I let it alone and went on my way.  Fast forward a week and this card is unable to get over 18.75 MH/s, at some point along the way it just dropped down there and stays there.   It's set to compute mode but the crazy thing is that when I set it to graphics mode and reboot the hash doesn't drop at all, it just stays at 18.5 -18.77 MH/s.  I switch it back to compute, reboot and it's at the same rate.  I've flashed back to the original rom and sure enough the hash rate stays exactly the same, 18.5 - 18.75.  Flash back to the rom that got me up to 31 MH/s and the results are the same, 18.5 - 18.75 MH/s.

Running on a B250 Mining Expert with 6 other 570's, 3 gpu's on one PSU, 4 on another with power to spare.  8GB of dd4 ram, a 64GB swap file sitting on a nice fast SSD, all powered by an intel 4400 cpu.  Would love some advice if anyone has any


I have 6 of exactly the same cards running at 30.5 stable for 6 weeks now. Stock bios with AMD Radeon should improve from 18 (stock) to 24 easely. After flashing the modded bios again, did you run the atikmdag-patcher and reboot before trying out the hash rate? Also double check in AMD Radeon if the card is actually on compute. 2 of my cards were stubborn, well AMD was stubborn I guess, had to set them to compute in AMD a few times and reboot one by one before they went to compute status. If you tried all of this already, flash stock bios, reinstall AMD: run DDU (I think you must uninstall the current AMD driver first) and reinstall your AMD driver of choice.
Then set you card to compute first and see if it is ok now.

Oh, and first before doing all of the above, do a quick check if your mobo bios is still correct for the PCIe settings etc 

That's what I would do first to try and fix this, but I'm also new at this game, and it takes an hour, maybe 2 to do all this.


But hopefully you fixed it already since your post is already a week old. Good luck.





Title: Re: Sapphire Nitro+ RX 570 8GB Ether Hashrate
Post by: miningchamp93 on November 18, 2018, 11:01:53 PM
Sapphire Nitro+ RX 570 provide hashrate of 800 Hash/s for CryptoNote   at Coreclock 1150 MHz and Memoryclock 2150MHz while consuming 90W watts.

https://miningchamp.com/gpus/130/Sapphire-Radeon-RX-580-8GB-hashrate (https://miningchamp.com/gpus/130/Sapphire-Radeon-RX-580-8GB-hashrate)


More You can find On https://miningchamp.com/ (https://miningchamp.com/)