Title: 220v vs 250v / atx psu pandaminer Post by: VoskCoin on June 11, 2017, 02:15:07 PM Who's running on 220v vs 250v?
Running ATX psu on 250v ends up being about 240v at the wall? With a pandaminer it says to use 220v, but who's running an atx psu or server psu on 240/250v? Title: Re: 220v vs 250v / atx psu pandaminer Post by: philipma1957 on June 11, 2017, 02:21:22 PM Who's running on 220v vs 250v? Running ATX psu on 250v ends up being about 240v at the wall? With a pandaminer it says to use 220v, but who's running an atx psu or server psu on 240/250v? I ran this psu https://www.newegg.com/Product/Product.aspx?Item=N82E16817182384&cm_re=rosewill_tokamak-_-17-182-384-_-Product at 241 volts. a word of advice do not use the pandaminer psu it is unsafe for the pandaminer in my opinion I would use a finksy 2000 watt server or an optimizer 2000 watt server for a pandaminer optimizer https://bitcointalk.org/index.php?action=profile;u=779364 finksy https://bitcointalk.org/index.php?action=profile;u=347946 Title: Re: 220v vs 250v / atx psu pandaminer Post by: VoskCoin on June 12, 2017, 11:10:03 PM Who's running on 220v vs 250v? Running ATX psu on 250v ends up being about 240v at the wall? With a pandaminer it says to use 220v, but who's running an atx psu or server psu on 240/250v? I ran this psu https://www.newegg.com/Product/Product.aspx?Item=N82E16817182384&cm_re=rosewill_tokamak-_-17-182-384-_-Product at 241 volts. a word of advice do not use the pandaminer psu it is unsafe for the pandaminer in my opinion I would use a finksy 2000 watt server or an optimizer 2000 watt server for a pandaminer optimizer https://bitcointalk.org/index.php?action=profile;u=779364 finksy https://bitcointalk.org/index.php?action=profile;u=347946 Title: Re: 220v vs 250v / atx psu pandaminer Post by: philipma1957 on June 13, 2017, 12:24:50 AM Who's running on 220v vs 250v? Running ATX psu on 250v ends up being about 240v at the wall? With a pandaminer it says to use 220v, but who's running an atx psu or server psu on 240/250v? I ran this psu https://www.newegg.com/Product/Product.aspx?Item=N82E16817182384&cm_re=rosewill_tokamak-_-17-182-384-_-Product at 241 volts. a word of advice do not use the pandaminer psu it is unsafe for the pandaminer in my opinion I would use a finksy 2000 watt server or an optimizer 2000 watt server for a pandaminer optimizer https://bitcointalk.org/index.php?action=profile;u=779364 finksy https://bitcointalk.org/index.php?action=profile;u=347946 I have a pdu putting out 238 to 241 volts it has c14 to c19 cable https://www.amazon.com/Cablelera-Power-Extension-IEC320-ZWACDFAN-03/dp/B00I4AI596/ref=sr_1_3?s=electronics&ie=UTF8&qid=1497313424&sr=1-3&keywords=c14+to+c19+power+cord vs (NEMA 5-15P to IEC320 C19)----- stock for the tokamak https://www.amazon.com/Cables-Go-10352-14AWG-IEC320/dp/B00LNDHCN6/ref=sr_1_1?s=electronics&ie=UTF8&qid=1497313339&sr=1-1-spons&keywords=nema+15p+to+c19+power+cord&psc=1 get a 30 amp circuit breaker with 240 volts put in correctly from an electrician make sure it has a l 30 r wall outlet http://www.ebay.com/itm/NEMA-L6-30R-Turn-Twist-Lock-Locking-Receptacle-Outlet-30A-250V-2P-3W-L6-30-/162134424426? make sure you have him use 10 gauge wires here is a good deal on a pdu http://www.ebay.com/itm/Dell-AP6031-Rackmount-Power-Distribution-Unit-PDU-200-240V-24-Amp-5T439-/282498334449? it need the outlet above but the power cords would be http://www.ebay.com/itm/6ft-C13-to-C20-14-3-Gauge-3-Prong-Power-Adapter-Cable-Cord-10Amp-125V-SJT-Black-/122267666365? or http://www.ebay.com/itm/6-foot-Power-Cord-Black-NEMA-C19-to-C20-14AWG-/391469503510? the pdu listed using a 30 amp circuit breaker is derated to 24amp you can do 4 pandaminers or 4x 7 card diy rigs and be safe. the pdu listed is a good price. |