220v vs 250v / atx psu pandaminer

[VoskCoin]

Who's running on 220v vs 250v?

Running ATX psu on 250v ends up being about 240v at the wall?



With a pandaminer it says to use 220v, but who's running an atx psu or server psu on 240/250v?

[philipma1957]

Who's running on 220v vs 250v?

Running ATX psu on 250v ends up being about 240v at the wall?



With a pandaminer it says to use 220v, but who's running an atx psu or server psu on 240/250v?

I ran this psu

 https://www.newegg.com/Product/Product.aspx?Item=N82E16817182384&cm_re=rosewill_tokamak-_-17-182-384-_-Product


at 241 volts.

a word of advice  do not use the pandaminer psu it is unsafe for the pandaminer in my opinion


I would use a finksy 2000 watt server  or an optimizer  2000 watt server for a pandaminer

optimizer
https://bitcointalk.org/index.php?action=profile;u=779364

finksy

https://bitcointalk.org/index.php?action=profile;u=347946

[VoskCoin]

Who's running on 220v vs 250v?

Running ATX psu on 250v ends up being about 240v at the wall?



With a pandaminer it says to use 220v, but who's running an atx psu or server psu on 240/250v?

I ran this psu

 https://www.newegg.com/Product/Product.aspx?Item=N82E16817182384&cm_re=rosewill_tokamak-_-17-182-384-_-Product


at 241 volts.

a word of advice  do not use the pandaminer psu it is unsafe for the pandaminer in my opinion


I would use a finksy 2000 watt server  or an optimizer  2000 watt server for a pandaminer

optimizer
https://bitcointalk.org/index.php?action=profile;u=779364

finksy

https://bitcointalk.org/index.php?action=profile;u=347946

Hey phil when you used that rosewill psu, did you change the OEM plug/power cord, or how exactly do you connect it because its not rated for the voltage . . but the amp draw would be fine? should I just get a pdu or?

[philipma1957]

Who's running on 220v vs 250v?

Running ATX psu on 250v ends up being about 240v at the wall?



With a pandaminer it says to use 220v, but who's running an atx psu or server psu on 240/250v?

I ran this psu

 https://www.newegg.com/Product/Product.aspx?Item=N82E16817182384&cm_re=rosewill_tokamak-_-17-182-384-_-Product


at 241 volts.

a word of advice  do not use the pandaminer psu it is unsafe for the pandaminer in my opinion


I would use a finksy 2000 watt server  or an optimizer  2000 watt server for a pandaminer

optimizer
https://bitcointalk.org/index.php?action=profile;u=779364

finksy

https://bitcointalk.org/index.php?action=profile;u=347946

Hey phil when you used that rosewill psu, did you change the OEM plug/power cord, or how exactly do you connect it because its not rated for the voltage . . but the amp draw would be fine? should I just get a pdu or?

I have a pdu putting out 238 to 241  volts


    it has       c14 to c19  cable

https://www.amazon.com/Cablelera-Power-Extension-IEC320-ZWACDFAN-03/dp/B00I4AI596/ref=sr_1_3?s=electronics&ie=UTF8&qid=1497313424&sr=1-3&keywords=c14+to+c19+power+cord


  vs



(NEMA 5-15P to IEC320 C19)----- stock for the tokamak

https://www.amazon.com/Cables-Go-10352-14AWG-IEC320/dp/B00LNDHCN6/ref=sr_1_1?s=electronics&ie=UTF8&qid=1497313339&sr=1-1-spons&keywords=nema+15p+to+c19+power+cord&psc=1


get a 30 amp circuit breaker with 240 volts put in correctly from an electrician

make sure it has a l 30 r  wall outlet


http://www.ebay.com/itm/NEMA-L6-30R-Turn-Twist-Lock-Locking-Receptacle-Outlet-30A-250V-2P-3W-L6-30-/162134424426?


make sure you have him use 10 gauge wires


here is a good deal on a pdu
http://www.ebay.com/itm/Dell-AP6031-Rackmount-Power-Distribution-Unit-PDU-200-240V-24-Amp-5T439-/282498334449?

it need the outlet above

but the power cords would be


 http://www.ebay.com/itm/6ft-C13-to-C20-14-3-Gauge-3-Prong-Power-Adapter-Cable-Cord-10Amp-125V-SJT-Black-/122267666365?


or http://www.ebay.com/itm/6-foot-Power-Cord-Black-NEMA-C19-to-C20-14AWG-/391469503510?



the pdu listed using a 30 amp circuit breaker is derated to 24amp

you can do 4 pandaminers or 4x

 7 card diy rigs  and be safe.

the pdu listed is a good price.