Title: Motherboards Selection - Please Guide Post by: aviz123 on September 03, 2017, 02:23:39 PM Hello Friends,
I am looking for some solid guidance. I have short listed some motherboards, please suggest what is the best pick to be used. If building 100 RIGs. It could be 6 or 7 or 8 or more GPU per rig. Have heard from some big rig farm guys that is much better to set 6 or 7 or max 8 GPU Cards per RIG. Please advise. Why? Some short listed and with my comments beside them AsRock H81 Pro BTC R2 - Have been using them, but the only issue i faced its a bit OLD model.. and just supports 6 GPU (i am fine with 6 too). But is being OLD model motherboard a problem for Long run? AsRock H110 Pro BTC - Looks good... but many have faced issues due to very close risers.. Also you can just run 8 NVIDIA or 8 AMD and rest other Chipset.. if running on Windows.. is it ? BioStar TB250-BTC+ 6.x - Mixed views, please share your views.. BioStar TB250-BTC PRO 6.x - Mixed views, please share your views.. Asus Z270P - is BIOS work , time consuming - if i am building 100 Rigs ? Asus Z270A - is BIOS work, time consuming - if i am building 100 Rigs I would appreciate your kind suggestion, in consideration, if building 100 RIGS.. Why should i go with Asus or Biostar or AsRock ? Hope to see some quick replies.... Title: Re: Motherboards Selection - Please Guide Post by: Undefined31415 on September 03, 2017, 11:51:28 PM It's usually good to limit the number of GPUs you put on each motherboard in order to avoid having too many eggs in one basket.
If the OS/driver throws an error, or the motherboard/CPU/etc. were to fail, then all the GPUs connected to that rig would be down until you fixed the issue. Additionally, stopping at 8 tends to cause fewer setup headaches, at least with current Windows 10 drivers. (Without delving into more modifications, you're stuck with up to 8 from AMD and/or 8 from Nvidia.) YMMV with certain Linux distros. Those are some of the main reasons why you should stop around 8 GPUs per rig. I personally use the Asrock H81 Pro (2013 model), and it has worked fine for me. I can't speak for any of the other boards, though. Title: Re: Motherboards Selection - Please Guide Post by: sevenmiles on September 04, 2017, 12:05:13 AM MSI Enthuastic Gaming Intel Z170A LGA 1151 DDR4 USB 3.1 ATX Motherboard (Z170A Gaming M5)
for 7 GPUs, very easy setup, and always available ASUS PRIME Z270-A LGA1151 DDR4 DP HDMI DVI M.2 USB 3.1 Z270 ATX Motherboard for 7 GPUs, very easy setup, and always available and relatively cheap Title: Re: Motherboards Selection - Please Guide Post by: aviz123 on September 04, 2017, 07:15:43 AM It's usually good to limit the number of GPUs you put on each motherboard in order to avoid having too many eggs in one basket. If the OS/driver throws an error, or the motherboard/CPU/etc. were to fail, then all the GPUs connected to that rig would be down until you fixed the issue. Additionally, stopping at 8 tends to cause fewer setup headaches, at least with current Windows 10 drivers. (Without delving into more modifications, you're stuck with up to 8 from AMD and/or 8 from Nvidia.) YMMV with certain Linux distros. Those are some of the main reasons why you should stop around 8 GPUs per rig. I personally use the Asrock H81 Pro (2013 model), and it has worked fine for me. I can't speak for any of the other boards, though. Thanks for your solid advise... Yeh i am probably thinking to go with H81PRO BTC R2... low price as well.. Title: Re: Motherboards Selection - Please Guide Post by: raindeer777 on September 04, 2017, 02:33:35 PM buy msi motherboard it supports 6 gpu at a time and is best for mining ......
Title: Re: Motherboards Selection - Please Guide Post by: QuintLeo on September 04, 2017, 08:18:19 PM AsRock H81 Pro BTC R2 - Have been using them, but the only issue i faced its a bit OLD model.. and just supports 6 GPU (i am fine with 6 too). But is being OLD model motherboard a problem for Long run? AsRock H110 Pro BTC - Looks good... but many have faced issues due to very close risers.. Also you can just run 8 NVIDIA or 8 AMD and rest other Chipset.. if running on Windows.. is it ? The spacing on these boards should be IDENTICAL. Slot spacing is part of the ATX specification. If I had to build a riser rig, I'd probably go for the H110 as ASRock has given me generally good results out of their motherboards and it supports my preference for using PS/2 ports for keyboards and mice. I'd actually prefer to go AM4, but I've yet to find an AM4 solution that I thought was a GOOD one for a mining motherboard. Title: Re: Motherboards Selection - Please Guide Post by: tomlev5 on September 04, 2017, 08:38:11 PM I have Asrock H110 Pro and the neighbour risers are touching among themselves. I am not sure if this is a problem? The board is working without restart for a couple of days, but not allways.
Title: Re: Motherboards Selection - Please Guide Post by: usuksobad on September 04, 2017, 08:40:48 PM My top pick - Asus Z270P
Most time saving motherboard. Title: Re: Motherboards Selection - Please Guide Post by: aviz123 on September 05, 2017, 10:22:19 AM My top pick - Asus Z270P Most time saving motherboard. Why is that? I heard have to do BIOS, which eats most of the time, if you are building 100-200 RIGS. Not a plug and play like ASROCK H81 PRO BTC R2. Title: Re: Motherboards Selection - Please Guide Post by: jimmykl on September 05, 2017, 11:08:01 AM AsRock H81 Pro BTC R2 - Have been using them, but the only issue i faced its a bit OLD model.. and just supports 6 GPU (i am fine with 6 too). But is being OLD model motherboard a problem for Long run? AsRock H110 Pro BTC - Looks good... but many have faced issues due to very close risers.. Also you can just run 8 NVIDIA or 8 AMD and rest other Chipset.. if running on Windows.. is it ? The spacing on these boards should be IDENTICAL. Slot spacing is part of the ATX specification. Hmmm… I think this is the ASRock blueprint for the H110 mobo https://imgur.com/a/1TCwe (https://imgur.com/a/1TCwe) Title: Re: Motherboards Selection - Please Guide Post by: car1999 on September 05, 2017, 11:21:18 AM just a small tip, DO NOT use the buggy m.2 to pcie adapter.
Title: Re: Motherboards Selection - Please Guide Post by: JuanHungLo on September 05, 2017, 11:26:57 AM It's usually good to limit the number of GPUs you put on each motherboard in order to avoid having too many eggs in one basket. If the OS/driver throws an error, or the motherboard/CPU/etc. were to fail, then all the GPUs connected to that rig would be down until you fixed the issue. Additionally, stopping at 8 tends to cause fewer setup headaches, at least with current Windows 10 drivers. (Without delving into more modifications, you're stuck with up to 8 from AMD and/or 8 from Nvidia.) YMMV with certain Linux distros. Those are some of the main reasons why you should stop around 8 GPUs per rig. I personally use the Asrock H81 Pro (2013 model), and it has worked fine for me. I can't speak for any of the other boards, though. Thanks for your solid advise... Yeh i am probably thinking to go with H81PRO BTC R2... low price as well.. Good thread, OP. I am doing the same as you now. The next logical question would be what power supply are you going to choose for that MB and which GPUs? Title: Re: Motherboards Selection - Please Guide Post by: cjclm7 on September 05, 2017, 12:02:00 PM just a small tip, DO NOT use the buggy m.2 to pcie adapter. ;D oooppsss... just bought one M.2 to PCI Adaptor (arriving by Mail next week). What exactly is the issue? I am using Asus Prime Z270A. No issues so far. Title: Re: Motherboards Selection - Please Guide Post by: aviz123 on September 05, 2017, 02:39:44 PM It's usually good to limit the number of GPUs you put on each motherboard in order to avoid having too many eggs in one basket. If the OS/driver throws an error, or the motherboard/CPU/etc. were to fail, then all the GPUs connected to that rig would be down until you fixed the issue. Additionally, stopping at 8 tends to cause fewer setup headaches, at least with current Windows 10 drivers. (Without delving into more modifications, you're stuck with up to 8 from AMD and/or 8 from Nvidia.) YMMV with certain Linux distros. Those are some of the main reasons why you should stop around 8 GPUs per rig. I personally use the Asrock H81 Pro (2013 model), and it has worked fine for me. I can't speak for any of the other boards, though. Thanks for your solid advise... Yeh i am probably thinking to go with H81PRO BTC R2... low price as well.. Good thread, OP. I am doing the same as you now. The next logical question would be what power supply are you going to choose for that MB and which GPUs? GPUs you can chose.. I am running 1080TI also.. 1070 Mini.. 1070 Extreme.. After MOBO Selection.. go to which cards you want to run.. than select PSU. Some guys are also using Server PSU - HP ones.. i have to see how to connect GPU in to those.. |