Title: Antminer with a laptop Post by: AkaSnake on September 28, 2017, 01:08:24 AM Hello guys, I'm planning on getting the L3+ Antminer and since it's loud I would have to use my laptop to put it somewhere else, does it work well with laptops? Is there any PC requirements to use the antminer?
Thanks! Title: Re: Antminer with a laptop Post by: nitego on September 28, 2017, 06:02:23 AM Watch this video.
https://www.youtube.com/watch?v=sz-XZL77qqs A laptop is only required to configure your miner during initial setup. Title: Re: Antminer with a laptop Post by: krauzzer02 on September 28, 2017, 07:10:24 AM A Laptop or a desktop computer it works, for specs you must have a decent working laptop (core i3 with 4 gb ram it works) and a good internet in order for your antminer to connect in mining pool for bitcoin like antpool, BTC.top etc and for etheruem - Ethpool, f2pool and more. There's a lot of crypto with a lot of mining pool so it's your choice, basically your laptop will just act like a gateway to the mining pool and your mining hardware will act as a processor for mining.
Title: Re: Antminer with a laptop Post by: doedz on September 28, 2017, 08:02:02 AM Watch this video. I think the laptop can be used to mine, I have asus rog and is reading if my laptop can be used to mine?https://www.youtube.com/watch?v=sz-XZL77qqs A laptop is only required to configure your miner during initial setup. Title: Re: Antminer with a laptop Post by: mx667 on September 28, 2017, 10:08:54 AM A Laptop or a desktop computer it works, for specs you must have a decent working laptop (core i3 with 4 gb ram it works) and a good internet in order for your antminer to connect in mining pool for bitcoin like antpool, BTC.top etc and for etheruem - Ethpool, f2pool and more. There's a lot of crypto with a lot of mining pool so it's your choice, basically your laptop will just act like a gateway to the mining pool and your mining hardware will act as a processor for mining. A laptop is only required to configure your miner during initial setup. I see but, does the laptop need to have that specification ? Or we can just use an old laptop to configure the the miner ? Title: Re: Antminer with a laptop Post by: krauzzer02 on September 28, 2017, 11:10:09 AM A Laptop or a desktop computer it works, for specs you must have a decent working laptop (core i3 with 4 gb ram it works) and a good internet in order for your antminer to connect in mining pool for bitcoin like antpool, BTC.top etc and for etheruem - Ethpool, f2pool and more. There's a lot of crypto with a lot of mining pool so it's your choice, basically your laptop will just act like a gateway to the mining pool and your mining hardware will act as a processor for mining. A laptop is only required to configure your miner during initial setup. I see but, does the laptop need to have that specification ? Or we can just use an old laptop to configure the the miner ? Title: Re: Antminer with a laptop Post by: mocacinno on September 28, 2017, 11:14:29 AM The correct answer was given by nitego:
The L3, just like all other recent bitmain hardware, has a controller embedded on the ASIC. You just plug the power in, connect the network port to your switch using a standard utp cable and it's done. You only need a laptop or PC to surf to the webGUI to set everything up. Any laptop, desktop, phone or tablet will do, as long as it's able to connect to your network and open a browser. Once the setup is done, you don't need the laptop/desktop/phone/tablet/server/thin client any longer. You are NOT using the laptop/desktop/tablet/phone to mine, only to setup (chose the pool, set some parameters,...) Title: Re: Antminer with a laptop Post by: AkaSnake on September 28, 2017, 01:54:13 PM The correct answer was given by nitego: The L3, just like all other recent bitmain hardware, has a controller embedded on the ASIC. You just plug the power in, connect the network port to your switch using a standard utp cable and it's done. You only need a laptop or PC to surf to the webGUI to set everything up. Any laptop, desktop, phone or tablet will do, as long as it's able to connect to your network and open a browser. Once the setup is done, you don't need the laptop/desktop/phone/tablet/server/thin client any longer. You are NOT using the laptop/desktop/tablet/phone to mine, only to setup (chose the pool, set some parameters,...) That clarifies everything, thanks for the info!! Title: Re: Antminer with a laptop Post by: ToneySab on October 01, 2017, 09:30:52 AM The correct answer was given by nitego: The L3, just like all other recent bitmain hardware, has a controller embedded on the ASIC. You just plug the power in, connect the network port to your switch using a standard utp cable and it's done. You only need a laptop or PC to surf to the webGUI to set everything up. Any laptop, desktop, phone or tablet will do, as long as it's able to connect to your network and open a browser. Once the setup is done, you don't need the laptop/desktop/phone/tablet/server/thin client any longer. You are NOT using the laptop/desktop/tablet/phone to mine, only to setup (chose the pool, set some parameters,...) I've had some misconceptions about how all that works. Thanks for clarifying this Mocacinno. |