Bitcoin Forum

Economy => Auctions => Topic started by: dogie on June 06, 2013, 04:04:18 AM



Title: [WTS] 5xASICMiner Erupter Blades
Post by: dogie on June 06, 2013, 04:04:18 AM
4x13.05GH on high clock, 2xb2 and 2xb3.5
1x~12.6GH on high clock, b1
=65GH drawing 665W from the wall

Want to sell as I'm now going to be travelling alot over the next 9 months and my parents house is already overheating from all the GPUs xD Moving to group buy income shares.

Includes:
2xB2 blades
2xB3.5 blades
1xB1 blade
Corsair CX750M PSU, prewired powering them all fine and can likely do 6
8 port ethernet switch
19x120mm fans, mix but most are high end, high potential cfm
3x140mm Scythe fans
12 port fan controller
2x 4 pin fan controller
Mounting system - this is my latest revision and by far the best. Temps are way down, fan speeds way down and it conveys the heat AWAY. My room is 4C cooler than previously at the same outside temp! Made from PVC pipe, room for a 6th/7th blade. Easy to extend whole structure if you want to mount more.

Only have 1 picture of this setup as waiting for my proper phone to come back from RMA:
http://i1279.photobucket.com/albums/y530/dogiee/IMG_20130604_234853_zps593dbdb9.jpg

Price to start at 270btc including UK delivery. Minimum increment 0.5 btc please, we don't want to be here all day.
International delivery will be paid by the buyer. Escrow available (John K please) but fee to be paid by the buyer. Customs fees/import duty/local taxes to be paid by the buyer.


Title: Re: [WTS] 5xASICMiner Erupter Blades
Post by: dogie on June 06, 2013, 04:05:33 AM
Posted 12 seconds ago, read 23 times 0_O


Title: Re: [WTS] 5xASICMiner Erupter Blades
Post by: dogie on June 06, 2013, 04:12:50 AM
FML keep forgetting you can't edit in here:
Auction will end Monday 10th @ 11pm GMT+1. I may withdraw the blades from sale or accept PM offers. I don't particularly want to do either but needs may arise. Bids may extend the end time, will see how it goes.


Title: Re: [WTS] 5xASICMiner Erupter Blades
Post by: TheOrri on June 06, 2013, 07:20:16 AM
Nice setup, 270 BTC for 5 blades is more than ordering directly from friedcat. Perhaps you want to drop the minimum to get some bids going.


Title: Re: [WTS] 5xASICMiner Erupter Blades
Post by: kinitex on June 06, 2013, 09:22:20 AM
Nice setup, 270 BTC for 5 blades is more than ordering directly from friedcat. Perhaps you want to drop the minimum to get some bids going.

Yes what a ridiculous price.


Title: Re: [WTS] 5xASICMiner Erupter Blades
Post by: SwissMiner on June 06, 2013, 10:07:07 AM
5 blades (no pipes, no other fancy things) for 19k$ cash in front of your parents.


Title: Re: [WTS] 5xASICMiner Erupter Blades
Post by: dogie on June 06, 2013, 10:23:03 AM
Nice setup, 270 BTC for 5 blades is more than ordering directly from friedcat. Perhaps you want to drop the minimum to get some bids going.
Friedcat has an additional 4-5 day leadtime assuming he responds immediately, which he doesnt.
Thats 12.5 of mining revenue right there.
My blades to UK or EU won't have any customs costs or risk they get held up. His will.
My blades include a prewired PSU worth 1btc
My blades inc 1.5btc of fans
My blades inc 0.8btc of other hardware
My blades inc a mounting system, probably the hardest thing to do for these blades.

Remember several in hand Avalons (same hash rate) have closed for 325-375 only this week. You're right though, lets get it moving.

New start price 250, minimum increments 5 until 275 at which point back to 0.5.


Title: Re: [WTS] 5xASICMiner Erupter Blades
Post by: dogie on June 06, 2013, 10:24:56 AM
5 blades (no pipes, no other fancy things) for 19k$ cash in front of your parents.
5 blades (no pipes, no other fancy things) for 19k$ cash in front of your parents.

@158btc, no thanks.


Title: Re: [WTS] 5xASICMiner Erupter Blades
Post by: dogie on June 06, 2013, 10:44:57 AM
EDIT 30000: Also taking offers for parted blades have a few already by PM. These will only be actioned if the entire blade set is not sold successfully.


Title: Re: [WTS] 5xASICMiner Erupter Blades
Post by: dogie on June 06, 2013, 01:46:37 PM
Edit 300001: Parted blades will inc a block of 4 fans inc cable adapters from 3-4 pin incase you don't have them.


Title: Re: [WTS] 5xASICMiner Erupter Blades
Post by: biganth on June 06, 2013, 01:54:49 PM
You should be able to edit, I never have problems editing my posts. Try making it a self-moderated thread.


Title: Re: [WTS] 5xASICMiner Erupter Blades
Post by: SwissMiner on June 06, 2013, 01:57:52 PM
20k$ hand to hand or SEPA


Title: Re: [WTS] 5xASICMiner Erupter Blades
Post by: Jere.Jones on June 06, 2013, 01:59:03 PM
You should be able to edit, I never have problems editing my posts. Try making it a self-moderated thread.
Auctions is a special subforum where no posts are editable.


Title: Re: [WTS] 5xASICMiner Erupter Blades
Post by: dogie on June 06, 2013, 02:04:17 PM
20k$ hand to hand or SEPA
=164btc, you'll have to do way better than that. Would prefer to move away from cash transactions, don't want the added risk. SEPA is fine, as is UKBT.

You should be able to edit, I never have problems editing my posts. Try making it a self-moderated thread.
Auctions is a special subforum where no posts are editable.

Indeed. It would be nice if we could add edits below messages though.


Title: Re: [WTS] 5xASICMiner Erupter Blades
Post by: dogie on June 06, 2013, 03:45:47 PM
Edit 300001: Now parting all blades, starting at 50 inc UK shipping.
Buy 1 blade = 4x120mm fans
Buy 3+ blades = fan controller for 4*number of blades + above.
Buy 5 blades = full racking system + PSU. + above

Largest orders will receive priority.


Title: Re: [WTS] 5xASICMiner Erupter Blades
Post by: talnted on June 06, 2013, 03:55:52 PM
The price is a bit steep..


Title: Re: [WTS] 5xASICMiner Erupter Blades
Post by: dogie on June 06, 2013, 04:22:50 PM
The price is a bit steep..
What is your offer? I have 1 blade @50, 1@40 via pm


Title: Re: [WTS] 5xASICMiner Erupter Blades
Post by: SwissMiner on June 06, 2013, 04:28:13 PM
I will rise my offer for all the blades after you provide a actual Picture where we can see all the blades mining


Title: Re: [WTS] 5xASICMiner Erupter Blades
Post by: dogie on June 06, 2013, 04:46:14 PM
I will rise my offer for all the blades after you provide a actual Picture where we can see all the blades mining
How would you like to see this? I've guessed what you want, so here is btcguild and the 5 blade interfaces. Interfaces provides actual hashing rate:
Apologies for the quality, my Nexus One will have to do while my One X is being repaired.
http://img.ctrlv.in/img/51b0bbc59b64b.jpg
http://i1279.photobucket.com/albums/y530/dogiee/IMG_20130606_174013_zps47032882.jpg
http://i1279.photobucket.com/albums/y530/dogiee/IMG_20130606_174024_zpsfdd45523.jpg
http://i1279.photobucket.com/albums/y530/dogiee/IMG_20130606_174029_zps6b268def.jpg
http://i1279.photobucket.com/albums/y530/dogiee/IMG_20130606_174034_zps2dbe1cd4.jpg
http://i1279.photobucket.com/albums/y530/dogiee/IMG_20130606_174039_zpse24caa6b.jpg


Title: Re: [WTS] 5xASICMiner Erupter Blades
Post by: buyer on June 06, 2013, 05:38:08 PM
What's the highest offer I need to beat?


Title: Re: [WTS] 5xASICMiner Erupter Blades
Post by: SwissMiner on June 06, 2013, 05:49:41 PM
are you serious, you use a camera for screenshots  ???

never heard about the function "printscreen"  ;D

sorry, but you are running high-tech-equipment and dont know the basics ...

http://s21.postimg.org/hlxckpsyf/gargamel.jpg


Title: Re: [WTS] 5xASICMiner Erupter Blades
Post by: dogie on June 06, 2013, 06:46:01 PM
are you serious, you use a camera for screenshots  ???

never heard about the function "printscreen"  ;D

sorry, but you are running high-tech-equipment and dont know the basics ...

http://s21.postimg.org/hlxckpsyf/gargamel.jpg
Because you could photoshop screenshots in fucking paint *sigh* Its a hell of a lot harder from a camera, especially a low quality one.


Title: Re: [WTS] 5xASICMiner Erupter Blades
Post by: dogie on June 06, 2013, 06:46:44 PM
What's the highest offer I need to beat?
For all 5 blades and equipment, 250 is still minimum bid.


Title: Re: [WTS] 5xASICMiner Erupter Blades
Post by: SwissMiner on June 06, 2013, 07:17:32 PM
I'm out .. not any longer interested .. time will tell  ;)


Title: Re: [WTS] 5xASICMiner Erupter Blades
Post by: dogie on June 06, 2013, 07:45:30 PM
I'm out .. not any longer interested .. time will tell  ;)
Ty


Title: Re: [WTS] 5xASICMiner Erupter Blades
Post by: dogie on June 06, 2013, 09:28:12 PM
Several interested parties via PM. If you're lurking, this is the time to reveal.


Title: Re: [WTS] 5xASICMiner Erupter Blades
Post by: buyer on June 06, 2013, 10:34:08 PM
how long until the auction ends?  (to lazy to go back through the picture wall again)


Title: Re: [WTS] 5xASICMiner Erupter Blades
Post by: dogie on June 06, 2013, 10:37:58 PM
how long until the auction ends?  (to lazy to go back through the picture wall again)
Listed close is Monday just before midnight GMT however its very likely it will close before. Lots of pending discussions so a sale might happen in the next 24 hours. I'm going to bed now so PM me your best. Can ship to the US within 4 working days.


Title: Re: [WTS] 5xASICMiner Erupter Blades
Post by: MikkisJ on June 07, 2013, 12:07:00 AM
Because you could photoshop screenshots in fucking paint *sigh* Its a hell of a lot harder from a camera, especially a low quality one.

1. Photoshop
2. Take a picture with a camera
3. ???
4. Profit

Something like that?


Title: Re: [WTS] 5xASICMiner Erupter Blades
Post by: TheJuice on June 07, 2013, 05:08:15 AM
Nice setup, 270 BTC for 5 blades is more than ordering directly from friedcat. Perhaps you want to drop the minimum to get some bids going.
Friedcat has an additional 4-5 day leadtime assuming he responds immediately, which he doesnt.
Thats 12.5 of mining revenue right there.
My blades to UK or EU won't have any customs costs or risk they get held up. His will.
My blades include a prewired PSU worth 1btc
My blades inc 1.5btc of fans
My blades inc 0.8btc of other hardware
My blades inc a mounting system, probably the hardest thing to do for these blades.

Remember several in hand Avalons (same hash rate) have closed for 325-375 only this week. You're right though, lets get it moving.

New start price 250, minimum increments 5 until 275 at which point back to 0.5.

I usually agree with you dogie, but really? A reasonable starting price is 2 BTC per GHASH.


Title: Re: [WTS] 5xASICMiner Erupter Blades
Post by: bcpokey on June 07, 2013, 05:55:10 AM
dogie found a way to invalidate my argument. Mine early on blades then resell for original price. Touche.


Title: Re: [WTS] 5xASICMiner Erupter Blades
Post by: dogie on June 07, 2013, 09:54:00 AM
Lowered starting price to 5@46.5 to fit with other offers.


Title: Re: [WTS] 5xASICMiner Erupter Blades
Post by: dogie on June 07, 2013, 10:24:29 AM
Lowered starting price to 5@46.5 to fit with other offers.
*ffs, thats the BIN.
46.5 UK, 47 shipped globally.


Title: Re: [WTS] 5xASICMiner Erupter Blades
Post by: dogie on June 07, 2013, 10:56:46 AM
Thread remade for clarity:
https://bitcointalk.org/index.php?topic=227993


Title: Re: [WTS] 5xASICMiner Erupter Blades
Post by: 67152398 on June 07, 2013, 11:38:08 AM
I'm out .. not any longer interested .. time will tell  ;)


+1


Title: Re: [WTS] 5xASICMiner Erupter Blades
Post by: TheSwede75 on June 07, 2013, 03:30:25 PM
are you serious, you use a camera for screenshots  ???

never heard about the function "printscreen"  ;D

sorry, but you are running high-tech-equipment and dont know the basics ...

http://s21.postimg.org/hlxckpsyf/gargamel.jpg
Because you could photoshop screenshots in fucking paint *sigh* Its a hell of a lot harder from a camera, especially a low quality one.

No kidding, screenshots are proof of nothing. When it comes to 'proof' the rule is do NOT use screencap, always cap an 'analog' environment.



Title: Re: [WTS] 5xASICMiner Erupter Blades
Post by: TheSwede75 on June 07, 2013, 03:31:46 PM
dogie found a way to invalidate my argument. Mine early on blades then resell for original price. Touche.

Welcome to the world of bitcoin, let me introduce you to opportunity/reward.  :P


Title: Re: [WTS] 5xASICMiner Erupter Blades
Post by: MikkisJ on June 07, 2013, 06:55:42 PM
No kidding, screenshots are proof of nothing. When it comes to 'proof' the rule is do NOT use screencap, always cap an 'analog' environment.

What's analog environment in this case?


Title: Re: [WTS] 5xASICMiner Erupter Blades
Post by: dogie on June 07, 2013, 07:32:26 PM
No kidding, screenshots are proof of nothing. When it comes to 'proof' the rule is do NOT use screencap, always cap an 'analog' environment.

What's analog environment in this case?
Shitty phone camera.


Title: Re: [WTS] 5xASICMiner Erupter Blades
Post by: Xian01 on June 07, 2013, 10:47:42 PM
Might be interested in 1 @ 40BTC shipped to USA.


Title: Re: [WTS] 5xASICMiner Erupter Blades
Post by: dogie on June 07, 2013, 11:14:21 PM
Might be interested in 1 @ 40BTC shipped to USA.
I'll add to the list once auction closes


Title: Re: [WTS] 5xASICMiner Erupter Blades
Post by: MikkisJ on June 08, 2013, 09:21:14 AM
No kidding, screenshots are proof of nothing. When it comes to 'proof' the rule is do NOT use screencap, always cap an 'analog' environment.

What's analog environment in this case?
Shitty phone camera.

How is it any better than a screenshot when you can take a picture of a photoshopped image?


Title: Re: [WTS] 5xASICMiner Erupter Blades
Post by: dogie on June 08, 2013, 12:09:17 PM
No kidding, screenshots are proof of nothing. When it comes to 'proof' the rule is do NOT use screencap, always cap an 'analog' environment.

What's analog environment in this case?
Shitty phone camera.

How is it any better than a screenshot when you can take a picture of a photoshopped image?
Because its unlikely I could complete that in the 5 minutes after him asking. Or why I would lie if I'm offering escrow


Title: Re: [WTS] 5xASICMiner Erupter Blades
Post by: SwissMiner on June 09, 2013, 04:43:02 PM
20k$ hand to hand or SEPA
=164btc, you'll have to do way better than that. Would prefer to move away from cash transactions, don't want the added risk. SEPA is fine, as is UKBT.


.. my offer you refused was not too bad (205 BTC) .. and now you are crying .. sulky kid  :D


Title: Re: [WTS] 5xASICMiner Erupter Blades
Post by: dogie on June 09, 2013, 04:50:01 PM
20k$ hand to hand or SEPA
=164btc, you'll have to do way better than that. Would prefer to move away from cash transactions, don't want the added risk. SEPA is fine, as is UKBT.


.. my offer you refused was not too bad (205 BTC) .. and now you are crying .. sulky kid  :D
Everyone who actually wants to run an auction, add this guy to ignore list. He spams random numbers, withdraws offers in auctions (lol) then goes around flaming.


Title: Re: [WTS] 5xASICMiner Erupter Blades
Post by: americandesi on June 09, 2013, 05:48:55 PM
20k$ hand to hand or SEPA
=164btc, you'll have to do way better than that. Would prefer to move away from cash transactions, don't want the added risk. SEPA is fine, as is UKBT.


.. my offer you refused was not too bad (205 BTC) .. and now you are crying .. sulky kid  :D
Everyone who actually wants to run an auction, add this guy to ignore list. He spams random numbers, withdraws offers in auctions (lol) then goes around flaming.

+1  dogie.. why don't you give him a negative trust feedback..?
Ethically you can do it because he sent fake bids to you.

Then he might understand seriousness of the auctions in these forums.!


Title: Re: [WTS] 5xASICMiner Erupter Blades
Post by: SwissMiner on June 09, 2013, 05:53:29 PM
.. because there was never a withdrawal by me  ;D


Title: Re: [WTS] 5xASICMiner Erupter Blades
Post by: Turbor on June 09, 2013, 06:24:23 PM
+1  dogie.. why don't you give him a negative trust feedback..?
Ethically you can do it because he sent fake bids to you.

Then he might understand seriousness of the auctions in these forums.!

What fake bids are you talking about ? To me it looks like he was not willing to go over 205 BTC which is a fair offer IMO.


Title: Re: [WTS] 5xASICMiner Erupter Blades
Post by: dogie on June 09, 2013, 06:35:11 PM
+1  dogie.. why don't you give him a negative trust feedback..?
Ethically you can do it because he sent fake bids to you.

Then he might understand seriousness of the auctions in these forums.!

What fake bids are you talking about ? To me it looks like he was not willing to go over 205 BTC which is a fair offer IMO.
Have a look at his post history or around the auctions board. He goes in, makes a random offer which is typically ridiculous or withdraws it himself, adds a few more posts etc. He's just bumping his post count so he can scam people in the future.


Title: Re: [WTS] 5xASICMiner Erupter Blades
Post by: dogjunior on June 09, 2013, 06:58:40 PM
What I don't like is someone who agrees to sell you something at a specific BTC price and then gets offers from others and cancels your deal even when both have agreed on price. If nothing has been exchanged then there is no contract but still it is a matter of honor. What if you when to a car dealership looking to buy a car and they had one that was a great deal. You tell the sales person that you want to buy the car and as they are working on the paper work another person comes in and offers more. The dealership sells the car to guy who just walked in who offered more. Do you think that is fair. 


Title: Re: [WTS] 5xASICMiner Erupter Blades
Post by: SwissMiner on June 09, 2013, 07:12:12 PM
He's just bumping his post count so he can scam people in the future.

uhhhh ... dogie and the crystal-ball ... he can see the future  ;D


Title: Re: [WTS] 5xASICMiner Erupter Blades
Post by: americandesi on June 09, 2013, 11:35:19 PM
What I don't like is someone who agrees to sell you something at a specific BTC price and then gets offers from others and cancels your deal even when both have agreed on price. If nothing has been exchanged then there is no contract but still it is a matter of honor. What if you when to a car dealership looking to buy a car and they had one that was a great deal. You tell the sales person that you want to buy the car and as they are working on the paper work another person comes in and offers more. The dealership sells the car to guy who just walked in who offered more. Do you think that is fair. 


Welcome to the Bitcoin World.! Get used to it.!
I have been in those circumstances myself several times.! When i sell on the forums, many people come, make deals and then never turnup or later deny to go ahead.

If you are expecting people in the virtual world to treat you the same way like your car dealer treats you in the real world, then i think you are in the wrong place.! Then dealing in bitcoin are not for you.!

btw the context you are referring to is totally flawed because the blades were in a auction and not retail sales.


Title: Re: [WTS] 5xASICMiner Erupter Blades
Post by: americandesi on June 09, 2013, 11:39:04 PM
What I don't like is someone who agrees to sell you something at a specific BTC price and then gets offers from others and cancels your deal even when both have agreed on price. If nothing has been exchanged then there is no contract but still it is a matter of honor. What if you when to a car dealership looking to buy a car and they had one that was a great deal. You tell the sales person that you want to buy the car and as they are working on the paper work another person comes in and offers more. The dealership sells the car to guy who just walked in who offered more. Do you think that is fair. 


btw.. talking of honor.. you were heavily underquoting the price to take advantage. First you agreed for a higher price and then came back and reduced the price saying you don't have couple of those extra BTC's to pay. Some guy outbid you in the auction.!


Title: Re: [WTS] 5xASICMiner Erupter Blades
Post by: dogjunior on June 10, 2013, 04:14:28 AM
Sorry then. I guess I don't know how auctions or bidding work. If you didn't like my price then you should have said so. No harm in that. Your blades and so you did what you did to get the most BTC.


Title: Re: [WTS] 5xASICMiner Erupter Blades
Post by: SwissMiner on June 10, 2013, 05:42:02 AM
Sorry then. I guess I don't know how auctions or bidding work. If you didn't like my price then you should have said so. No harm in that. Your blades and so you did what you did to get the most BTC.

auction?

the whole part was like kindergarten  :'(


Title: Re: [WTS] 5xASICMiner Erupter Blades
Post by: Rora on June 12, 2013, 09:42:48 AM
That price is stupidly high.

MILK THE BITCOIN ARMS RACE FOR EVERYTHING ITS WORTH!


Title: Re: [WTS] 5xASICMiner Erupter Blades
Post by: dogie on June 12, 2013, 12:01:18 PM
That price is stupidly high.

MILK THE BITCOIN ARMS RACE FOR EVERYTHING ITS WORTH!
Thats the price 100s and 100s of units have been sold at worldwide.
2 more sold at BIN, 2 left.


Title: Re: [WTS] 5xASICMiner Erupter Blades
Post by: pikeadz on June 12, 2013, 10:01:49 PM
That price is stupidly high.

MILK THE BITCOIN ARMS RACE FOR EVERYTHING ITS WORTH!

The blade is worth what someone is willing to pay for it.  Why is this concept so hard for people to understand?


Title: Re: [WTS] 5xASICMiner Erupter Blades
Post by: dogie on June 12, 2013, 10:02:47 PM
All my in hand blades sold, however have buyers for more. Anyone wanting to sell, pm me.


Title: Re: [WTS] 5xASICMiner Erupter Blades
Post by: ahitman on June 14, 2013, 02:31:16 AM
are you serious, you use a camera for screenshots  ???

never heard about the function "printscreen"  ;D

sorry, but you are running high-tech-equipment and dont know the basics ...


Because you could photoshop screenshots in fucking paint *sigh* Its a hell of a lot harder from a camera, especially a low quality one.

No kidding, screenshots are proof of nothing. When it comes to 'proof' the rule is do NOT use screencap, always cap an 'analog' environment.



You can just as easily photoshop an image and then take an analog picture of the photoshoped image. This would propably make the fake even harder to discover as a low quality analog picture could hide details that would allow you to discover the fake.


Title: Re: [WTS] 5xASICMiner Erupter Blades
Post by: dogie on June 14, 2013, 02:32:21 AM
are you serious, you use a camera for screenshots  ???

never heard about the function "printscreen"  ;D

sorry, but you are running high-tech-equipment and dont know the basics ...


Because you could photoshop screenshots in fucking paint *sigh* Its a hell of a lot harder from a camera, especially a low quality one.

No kidding, screenshots are proof of nothing. When it comes to 'proof' the rule is do NOT use screencap, always cap an 'analog' environment.



You can just as easily photoshop an image and then take an analog picture of the photoshoped image. This would propably make the fake even harder to discover as a low quality analog picture could hide details that would allow you to discover the fake.
How do you know the foil in your tin foil hat isn't bugged?

Blades were sold.


Title: Re: [WTS] 5xASICMiner Erupter Blades
Post by: dogie on June 18, 2013, 04:47:54 AM
Still buying and selling blades. PM me for details, lots of transactions completed.


Title: Re: [WTS] 5xASICMiner Erupter Blades
Post by: SwissMiner on June 18, 2013, 05:36:02 PM
Here you can get a real one ... not just talking "hot air" ...

http://www.ebay.com/itm/Bitcoin-Miner-Block-Erupter-Blade-up-to-13-3-GH-s-NO-USB-BFL-Ready-to-Ship-/300920455587?pt=CPUs&hash=item461041c1a3


Title: Re: [WTS] 5xASICMiner Erupter Blades
Post by: wpgdeez on June 18, 2013, 05:37:45 PM
I have one for sale as well, http://www.ebay.ca/itm/Asicminer-Block-Eruptor-Bitcoin-mining-Blade-13-GHash-/281123383174?pt=LH_DefaultDomain_2&hash=item4174426786

Free express Shipping in North America


Title: Re: [WTS] 5xASICMiner Erupter Blades
Post by: SwissMiner on June 18, 2013, 05:40:23 PM
I have one for sale as well, http://www.ebay.ca/itm/Asicminer-Block-Eruptor-Bitcoin-mining-Blade-13-GHash-/281123383174?pt=LH_DefaultDomain_2&hash=item4174426786

Free express Shipping in North America

.. nice offer ... if you living in North-America  ;D

ptherwise you should take this one :

http://www.ebay.com/itm/Bitcoin-Miner-Block-Erupter-Blade-up-to-13-3-GH-s-NO-USB-BFL-Ready-to-Ship-/300920455587?pt=CPUs&hash=item461041c1a3


Title: Re: [WTS] 5xASICMiner Erupter Blades
Post by: twitami1 on June 18, 2013, 06:08:37 PM
I have one for sale as well, http://www.ebay.ca/itm/Asicminer-Block-Eruptor-Bitcoin-mining-Blade-13-GHash-/281123383174?pt=LH_DefaultDomain_2&hash=item4174426786

Free express Shipping in North America

.. nice offer ... if you living in North-America  ;D

ptherwise you should take this one :

http://www.ebay.com/itm/Bitcoin-Miner-Block-Erupter-Blade-up-to-13-3-GH-s-NO-USB-BFL-Ready-to-Ship-/300920455587?pt=CPUs&hash=item461041c1a3

$8000?  Lol. Its a trap!!


Title: Re: [WTS] 5xASICMiner Erupter Blades
Post by: SwissMiner on June 18, 2013, 06:12:31 PM
$8000?  Lol. Its a trap!!

.. trap  ???

Where do you see any trap  ???


Title: Re: [WTS] 5xASICMiner Erupter Blades
Post by: dogie on June 19, 2013, 12:51:59 PM
Bump


Title: Re: [WTS] 5xASICMiner Erupter Blades
Post by: TheSwede75 on June 19, 2013, 01:03:36 PM
Bump

I feel like I should hop in here and he'll SCAM, tell you that you will never get ROI and generally question the entire sale. But hey Dogie, what kind of person would do that..right?


Title: Re: [WTS] 5xASICMiner Erupter Blades
Post by: tigerfree on June 19, 2013, 01:06:49 PM
i  me not trashing but reduce your price if you want to sell them .


Title: Re: [WTS] 5xASICMiner Erupter Blades
Post by: twitami1 on June 19, 2013, 01:25:47 PM
I really want one (or a few of these), but at this point, with a new one coming out in a month or so, which is going to cost less and do more, I can't see buying these at anywhere close to the prices. It's like a car, after its used, and has been used by the owner for a while, yo don't try to sell it for double what you originally paid for it, you sell it for half. Especially when the new one is about to come out :)


Title: Re: [WTS] 5xASICMiner Erupter Blades
Post by: dogie on June 19, 2013, 01:39:08 PM
Bump

I feel like I should hop in here and he'll SCAM, tell you that you will never get ROI and generally question the entire sale. But hey Dogie, what kind of person would do that..right?

What on earth... well thats some more scum for the ignore list.

i  me not trashing but reduce your price if you want to sell them .
Already sold. If you can't afford them, they're not for you.