Title: Getting SMOS to recognize GPU1 and GPU2 Post by: antireed on February 06, 2018, 05:23:08 AM Hey everybody,
This is my first post, so go easy on me: Just set up my first miner using SMOS as my operating system and zen.suprnova as my mining pool. I'm running into an issue where SMOS sees my 3 GPUs (one 1080TI and two 1060s). However, it only seems to want to use the 1080TI to mine. Because it recognizes all 3 cards and displays them to me on the console, I am inclined to believe this is a software error instead of a hardware error. Here are my hardware specs: Asus H110M-A motherboard Intel Celeron G3939 processor 1 DIMM of 8GB RAM EVGA 750 Watt Gold PSU 3 riser cards -- each connected to their own SATA connector and GPU 1 1080 TI 2 1060s Each card is connected to its own 12V port in the PSU with the 1080 TI using 2 8-pin power connectors. Here are the images I'm receiving from both the SMOS console and the SMOS GUI when I boot up: ...okay, that's f*%&ing obnoxious. This forum doesn't allow me to upload photos from my PC?? Awesome!! So instead, allow me to manually type everything on my SMOS console's (miner's) screen **rolls eyes** ================OVERCLOCKING=================== Applying CoreOffset: 0 MemoryOffset: 0 for GPU 0 with GPU Type: 3 Enabled persistence mode for GPU 00000000:01:00.0. Enabled persistence mode for GPU 00000000:03:00.0. Enabled persistence mode for GPU 00000000:04:00.0. All done. Applying PowerLimit: 270 watt for GPU 0 Applying CoreOffset: 0 MemoryOffset: 0 for GPU 1 with GPU Type: 3 Applying PowerLimit: 100 watt for GPU 1 Applying CoreOffset: 0 MemoryOffset: 0 for GPU 2 with GPU Type: 3 Applying POwerLimit: 100 watt for GPU 2 ===============Starting Miner====================== # zm 0.5.8 # GPU0 + GeForce GTX 1080 MB: 8114 PCI: 1:0 # connected to: zen.suprnova.cc:3618 #server set difficulty to : 0003c3c3c3c3c3c3c3c3c3c3c3c3....... > GPU0 47C Sol/s: 509.7 Sol/W: 2.86 Avg: 509.7 I/s: 273.9 Sh: 2.99 1.00 96 + > GPU0 52C .... *same shit* > GPU0 > GPU0 so there are no signs of GPU1 and GPU2 However, in the GUI, it looks like this: 65 C 1936 1569 1596 (270,100,100) 61% 4513 4006 4006 Any help given would be greatly appreciated! Title: Re: Getting SMOS to recognize GPU1 and GPU2 Post by: Raymond_B on February 06, 2018, 05:27:17 AM Hey everybody, This is my first post, so go easy on me: Just set up my first miner using SMOS as my operating system and zen.suprnova as my mining pool. I'm running into an issue where SMOS sees my 3 GPUs (one 1080TI and two 1060s). However, it only seems to want to use the 1080TI to mine. Because it recognizes all 3 cards and displays them to me on the console, I am inclined to believe this is a software error instead of a hardware error. Here are my hardware specs: Asus H110M-A motherboard Intel Celeron G3939 processor 1 DIMM of 8GB RAM EVGA 750 Watt Gold PSU 3 riser cards -- each connected to their own SATA connector and GPU 1 1080 TI 2 1060s Each card is connected to its own 12V port in the PSU with the 1080 TI using 2 8-pin power connectors. Here are the images I'm receiving from both the SMOS console and the SMOS GUI when I boot up: ...okay, that's f*%&ing obnoxious. This forum doesn't allow me to upload photos from my PC?? Awesome!! So instead, allow me to manually type everything on my SMOS console's (miner's) screen **rolls eyes** ================OVERCLOCKING=================== Applying CoreOffset: 0 MemoryOffset: 0 for GPU 0 with GPU Type: 3 Enabled persistence mode for GPU 00000000:01:00.0. Enabled persistence mode for GPU 00000000:03:00.0. Enabled persistence mode for GPU 00000000:04:00.0. All done. Applying PowerLimit: 270 watt for GPU 0 Applying CoreOffset: 0 MemoryOffset: 0 for GPU 1 with GPU Type: 3 Applying PowerLimit: 100 watt for GPU 1 Applying CoreOffset: 0 MemoryOffset: 0 for GPU 2 with GPU Type: 3 Applying POwerLimit: 100 watt for GPU 2 ===============Starting Miner====================== # zm 0.5.8 # GPU0 + GeForce GTX 1080 MB: 8114 PCI: 1:0 # connected to: zen.suprnova.cc:3618 #server set difficulty to : 0003c3c3c3c3c3c3c3c3c3c3c3c3....... > GPU0 47C Sol/s: 509.7 Sol/W: 2.86 Avg: 509.7 I/s: 273.9 Sh: 2.99 1.00 96 + > GPU0 52C .... *same shit* > GPU0 > GPU0 so there are no signs of GPU1 and GPU2 However, in the GUI, it looks like this: 65 C 1936 1569 1596 (270,100,100) 61% 4513 4006 4006 Any help given would be greatly appreciated! OK, very gently, this the wrong forum :) Title: Re: Getting SMOS to recognize GPU1 and GPU2 Post by: antireed on February 06, 2018, 05:31:54 AM Hey everybody, This is my first post, so go easy on me: Just set up my first miner using SMOS as my operating system and zen.suprnova as my mining pool. I'm running into an issue where SMOS sees my 3 GPUs (one 1080TI and two 1060s). However, it only seems to want to use the 1080TI to mine. Because it recognizes all 3 cards and displays them to me on the console, I am inclined to believe this is a software error instead of a hardware error. Here are my hardware specs: Asus H110M-A motherboard Intel Celeron G3939 processor 1 DIMM of 8GB RAM EVGA 750 Watt Gold PSU 3 riser cards -- each connected to their own SATA connector and GPU 1 1080 TI 2 1060s Each card is connected to its own 12V port in the PSU with the 1080 TI using 2 8-pin power connectors. Here are the images I'm receiving from both the SMOS console and the SMOS GUI when I boot up: ...okay, that's f*%&ing obnoxious. This forum doesn't allow me to upload photos from my PC?? Awesome!! So instead, allow me to manually type everything on my SMOS console's (miner's) screen **rolls eyes** ================OVERCLOCKING=================== Applying CoreOffset: 0 MemoryOffset: 0 for GPU 0 with GPU Type: 3 Enabled persistence mode for GPU 00000000:01:00.0. Enabled persistence mode for GPU 00000000:03:00.0. Enabled persistence mode for GPU 00000000:04:00.0. All done. Applying PowerLimit: 270 watt for GPU 0 Applying CoreOffset: 0 MemoryOffset: 0 for GPU 1 with GPU Type: 3 Applying PowerLimit: 100 watt for GPU 1 Applying CoreOffset: 0 MemoryOffset: 0 for GPU 2 with GPU Type: 3 Applying POwerLimit: 100 watt for GPU 2 ===============Starting Miner====================== # zm 0.5.8 # GPU0 + GeForce GTX 1080 MB: 8114 PCI: 1:0 # connected to: zen.suprnova.cc:3618 #server set difficulty to : 0003c3c3c3c3c3c3c3c3c3c3c3c3....... > GPU0 47C Sol/s: 509.7 Sol/W: 2.86 Avg: 509.7 I/s: 273.9 Sh: 2.99 1.00 96 + > GPU0 52C .... *same shit* > GPU0 > GPU0 so there are no signs of GPU1 and GPU2 However, in the GUI, it looks like this: 65 C 1936 1569 1596 (270,100,100) 61% 4513 4006 4006 Any help given would be greatly appreciated! OK, very gently, this the wrong forum :) What what? How? This is mining support, isn't it? Title: Re: Getting SMOS to recognize GPU1 and GPU2 Post by: Raymond_B on February 06, 2018, 05:34:20 AM Bitcoin mining
|