Hey everybody,
This is my first post, so go easy on me:
Just set up my first miner using SMOS as my operating system and zen.suprnova as my mining pool. I'm running into an issue where SMOS sees my 3 GPUs (one 1080TI and two 1060s). However, it only seems to want to use the 1080TI to mine. Because it recognizes all 3 cards and displays them to me on the console, I am inclined to believe this is a software error instead of a hardware error.
Here are my hardware specs:
Asus H110M-A motherboard
Intel Celeron G3939 processor
1 DIMM of 8GB RAM
EVGA 750 Watt Gold PSU
3 riser cards -- each connected to their own SATA connector and GPU
1 1080 TI
2 1060s
Each card is connected to its own 12V port in the PSU with the 1080 TI using 2 8-pin power connectors.
Here are the images I'm receiving from both the SMOS console and the SMOS GUI when I boot up:
...okay, that's f*%&ing obnoxious. This forum doesn't allow me to upload photos from my PC?? Awesome!!
So instead, allow me to manually type everything on my SMOS console's (miner's) screen **rolls eyes**
================OVERCLOCKING===================
Applying CoreOffset: 0 MemoryOffset: 0 for GPU 0 with GPU Type: 3
Enabled persistence mode for GPU 00000000:01:00.0.
Enabled persistence mode for GPU 00000000:03:00.0.
Enabled persistence mode for GPU 00000000:04:00.0.
All done.
Applying PowerLimit: 270 watt for GPU 0
Applying CoreOffset: 0 MemoryOffset: 0 for GPU 1 with GPU Type: 3
Applying PowerLimit: 100 watt for GPU 1
Applying CoreOffset: 0 MemoryOffset: 0 for GPU 2 with GPU Type: 3
Applying POwerLimit: 100 watt for GPU 2
===============Starting Miner======================
# zm 0.5.8
# GPU0 + GeForce GTX 1080 MB: 8114 PCI: 1:0
# connected to: zen.suprnova.cc:3618
#server set difficulty to : 0003c3c3c3c3c3c3c3c3c3c3c3c3.......
> GPU0 47C Sol/s: 509.7 Sol/W: 2.86 Avg: 509.7 I/s: 273.9 Sh: 2.99 1.00 96 +
> GPU0 52C .... *same shit*
> GPU0
> GPU0
so there are no signs of GPU1 and GPU2
However, in the GUI, it looks like this:
65 C 1936 1569 1596 (270,100,100)
61% 4513 4006 4006
Any help given would be greatly appreciated!
OK, very gently, this the wrong forum
