Bitcoin Forum

For auction: 8 BitBurner Fury boards:

Properties:

• Hashrate ~50 GH/board*
• 16 Bitfury ASIC chips
• 4 Layer thermally enhanced PCB
• External clock
• PIC32 native USB-Controller
• CAN-Bus inter-module communication (Only one USB connection for up to 8 modules)
• Power connectors: 6 Pin VGA, barrel jack for wallwart, terminal block.
• Power requirement: 50 up to 75 Watts
• Onboard 60A adjustable core voltage power supply
• Host software: Cgminer
• Temperature controlled fan

*Hashrate is a demonstrated indication and is no guarantee.

Included:

• Assembled Bitburner Fury PCB
• Including 16 Bitfury ASIC chips
• Micro-USB Cable (one for every 8 boards)
• Mounting bolts
• Cooling fan & mounting brackets (one for every 2nd board)

Starting bid: 0 btc per unit

Minimum bid increment: 0.1 btc

Shipping: Fedex International Priority shipement on 25/11/2013
Find your zone: https://docs.google.com/file/d/0BzI5bgsiFJAiWllkZTNuSVhWUkE/edit?usp=drive_web
Find your shipping cost: https://docs.google.com/spreadsheet/ccc?key=0AjI5bgsiFJAidDAyeTVuQUtkdWFIUFN0Sm9kV1RTcUE#gid=0

Pictures:
https://www.asic-hardware.com/wp-content/uploads/2013/09/Bitburner-Fury1.jpghttps://www.asic-hardware.com/wp-content/uploads/2013/09/IMG_20131029_110432-375x500.jpg

Auction ends:
24/11/2013 20:00:00 GMT

Bidding
examples:
1x1.5BTC
4x1.1BTC
8x1.9BTC

8@0.5

4@0.9

4 @ 0.6

0.8 btc for one board

8@0.9

2 @ 1

Err I meant to type 8 x 0.9 not 8@0.9 as that would imply 0.9 for all 8 units.

Sorry.

8 @ 1

1.1 btc for one good Board

1.1 btc for one board

3@1.2

2 @ 1.1

2 @ 1.1

1 @ 1.11

2 @ 1.15 (updated bid)

4x1.2

1@1.4

4@1.2

8x1.3

where are you from? EU i pay in Cash! or Bitcoin.
take all 8.. pm me ..

2 @ 1.4

Make that 4 @ 1.4

4 @ 1.4

16 BTC for all 8 Boards including shipping to germany and escrow.

3 @ 1.5

8 x 1.5

4@1.55

sorry corrected

4@1.5

8 x 1.6

1.3 btc for one board

8 x 1.7

cryptx, are you considering truman's bid?

Pretty chilly up north eh? :)

-8 C outside 22.3 C inside (where the magic happens) :)

I am newbie.
But my offer is serious and i will buy the boards.

I don't doubt your seriousness. However, I do hope you've done some calculations beforehand - unless you are intent on getting these by any means necessary.

2 @ 1.41

quote author=Moieur01 link=topic=344238.msg3694611#msg3694611 date=1385285502]
2 @ 1.41
[/quote]

sorry mistake above

2 @ 1.3

We don't offer escrow.

Highest bid so far 8x1.7 BTC

No need to put in lower bids.

So 8x2 BTC without Escrow...(-;

Do your research before purchase.
They have sold hundreds of boards and no one complain about not receiving it. Warranty on the other  hand...
I'll buy more if the price about 1.5 BTC.

Damn you really want these don't ya ;)

Highest bid:

8x2BTC

3u45min to go

8 x 2.10 ;)

Dammit I gotta get some sleep and the auction ends in 3 hours. Ohwell, I guess my last bid will be 2.15 x 8 ..if I win I win if I lose I lose (most likely to the deep pocketed Truman hehe)

You could buy them for 1.5Btc each, not long ago, when BTC price were lower.
Good luck anyway.

honi soit qui mal y pense..

https://i.imgur.com/2XMKnwa.jpg

https://i.imgur.com/DFW0Cuv.jpg


a nice lection in the law of supply and demand.

True, until the btc price made everyone scamble for additional hashing power. They were overpriced then they are overpriced now. The only reason I'd be willing to pay 2.x is to replace my power sucking heat producing Avalons - which most likely I'll sell to cover some of cost of these miners. I have heard that cryptx provides no warranty for these so I'm a bit concerned about that. Not even a 30 day RMA period in case the boards contain a defect?

Shill bidder. Shady stuff going on here perhaps.

In Poland, someone is selling 1 board for 2.75BTC....No comment.
It`s crazy...

I don't know, maybe truman is real and just wants to get ASICs at any price. I looked at these items the day I got the mail and was tempted, but then considered them as too expensive (for me). BTC was around the same rate. They seem to sell better here than in the shop and even with a nearly 1 BTC premium.

0.031 btc per gh/s was too expensive ? :)  its just pure profit even with 35% diffculty incerase every jump (but now its only like 20%)

a KNCMiner Jupiter November delivery was around 0.01 BTC per GH/s and these units are easier to handle.

8x2,5 BTC

END OF AUCTION

Winning bid:

Truman 8x2,5BTC

2.5 for 50 GHps is nothing spectacular

on ebay.de bfl 60 GHps do not sell below 2.000 EUR each, mostly at 2.200 - 2.400 which is 4 BTC you can check that out yourself.

Thank you.

Please send me a PM with the Details of Deal.

I've already sent you the details...

Nope. No RMA. No communication. Nothing. Once he sells you the board, you are on your own. He will not respond if you tell him you are having problems with your board. One of my boards died within 36 hours. I sent PMs, I posted on his threads, I sent email to the shop, no response. But he is quick to put up auction after auction. It's all a money grab.

Wow, then I'm glad I did not win.

Truman, congratulations and best of luck to you. Welcome to the miners club. Your membership card will be in the mail :)

no it was much more than 0.03  ;) price was not 800$ + it was not in stock

The Jupiter was sold for $ 5,000 and makes around 550 GH/s, thats $ 9 per GH/s.
These things sell for $ 2,000 and make 50 GH/s, thats $ 40 per GH/s.

@cryptx: Could you please write a statement about this? Thank you very much!

In this last batch we have sold hundreds of boards to hundreds of different customers.

All the boards were tested extensively. This last batch has been hashing for weeks and we had zero! boards broken while hashing.

Generally speaking, customers do things with these boards which are not in our control. We have had mails about set-ups which are destined to break boards. Because of this we do not give guarantees on the boards and this is also stated in the terms and conditions on our website. These terms and conditions are approved on while buying the boards. (https://www.asic-hardware.com/terms-and-conditions/)

Also, do not expect working usb ports: https://bitcointalk.org/index.php?topic=322129.120

This problem is long fixed

And dont expect good support after sale
I got one board with the first batch that only gives me 19 GHash.
Supportmails were not answered until I posted in the next sales thread.
You must have the wrong settings!? tried the ones cryptx gave me and...
... getting less than 15 Ghash
Than cryptx told me it must be the pool, so I tested 3 other pools and its all the same!!!
19Ghash a max.

I now remembered him two times of my problem but again and again I get no response to my mails...

that sucks!

Instead of complaining here, why don't you guys just give cryptx a bad rating on his feedback to warn other buyers?

https://bitcointalk.org/index.php?action=trust;u=142607

That's likey cause some (probably a LOT of if you're getting that low hash rate) of the bitfury chips are either a) "bad" - hash but hash at a significantly reduced rate b) dead - ie dead completely.

I have bitfury h-cards and like everyone else a few of the chips of many boards are just dead - refuse to hash no matter what no matter what voltage they are given. However, even though it might technically not be cryptx's fault the chips are bad he should to the right thing and refund you the difference in lost hashing power.

I purchased an 8 board set from cryptx and I am happy, all USB ports worked.  Bitburner Fury's do have some quirks in general however...

 :'( :'( :'( :'( :'( :'( :'( :'( :'(
need help
When i suppose to send few of (not working bitburner fury boards)?  FOR REPAIR

ANY contact will be great
Thanks

when ? there is no timeframe when i guess ...

When? ???
i didnt get u ??? ??? ??? ???

Got 2 boards from cryptx, 1st and 2nd batch. Support was great even though usb fell off (my own fault). They hooked me up with canbus cable and both hashing at 97ghz average. Had to use pickit3 to update hex file, but it was all good after that. Cryptx even sent me 2 refunds through paypal as promised. I would do business with cryptx again.

I tried to contact him but no way
Is it possible to repair them?

any dead board owners want to sell them in usd?

Any faulty Asic let me now :)

i have two :'( :'( :'( :'(