Bitcoin Forum

How beneficial is RWT (TRANSFORMER OF REAL ELECTRIC POWER) device?At the moment, cost of such devices as wind generators or solar panels is approximately $ 100 per 100 watts of power. It is also necessary to consider the cost of additional equipment, that is battery and inverter. RWT does not always require battery and inverter and does not need wind or sunlight at all.
The proposed cost of RWT device up to date is $ 0.18x100vatt = $ 18. This is 5.5 times cheaper than wind generators or solar panels.
RWT can be used not only as separate device, but also in conjunction with wind generator or solar battery. And then there is 3-5 times more power at the output!
Example: wind generator or solar panel (1000 watt) >>> RWT (x3-x5) >>> load 3000-5000 watt

https://i.imgur.com/DhroFUj.jpg

The market value of RWT will be higher than wind generators or solar panels, and this adds advantage to RWTS token owners.
RWTS token holders will not only receive RWT device at low price but can also earn trading RWTS on exchange.

RWT is powered by UPS, which in turn is connected to a 220-volt load of incandescent lamps with a total power of 120 Watts.
The total cost of power on the power supply UPS battery (and at the RWT input) is 3 times less than power on which the load operates.

https://i.imgur.com/N44rtCX.jpg

https://i.imgur.com/SZOJix8.jpg

https://i.imgur.com/aRFhAll.jpg

Any details like softcap or Hardcap from this ICO? and did you start a bounty campaign so you can attract more investor to invest in your ICO ?

5% reward on support and promotion of the project.

Minimal sum by which the project is considered – $ 200.000.


Read the details: Our SoftCap-HardCap >>> (http://telegra.ph/Soft-Cap---Hard-Cap-05-23)

Yes, I will hold the bounty.
Now I prepare conditions.

it's nice, will you make a bounty for translation into local language too?
if yes can i reserve for Indonesian translation?

 
https://i.imgur.com/dSR8EiR.jpg

https://i.imgur.com/cOSBRZG.jpg

Thank you !  :)

RWT does not always require battery and inverter and does not need wind or sunlight at all.

https://i.imgur.com/FQZjguH.png

https://i.imgur.com/foborGE.png

What kind of project could start with 200.000$ ?? This can't even cover the charge of webdesign  ???
Softcap is greatly limited and you can't pay for anything with that amount. What's the attitudes of your advisors about this and want also to know about why choosing the waves platform.

We have a minimum amount of $ 200,000, which is 12% of the maximum amount, according to the rules this is not enough, but depending on what to proceed. How one can apply general rules (recommendations) for different projects with different goals. In general why collect maximum funds if minimum specified amount is enough for the project? Each project may have its own answer to this question.

Here is the answer of our project.

To create a laboratory to conduct all the studies, tests and gather different samples of the device, and also for creation of one assembly shop and material directly for the device, $ 200,000 is required is the minimum specified in the project. At the same time, the estimated production capacity is determined within 30 RWT devices with a total output capacity of 30,000watt per day. This allows you to fulfill your obligations to investors for receiving the device in exchange for RWTS tokens in several months. At the same time, production expenses are taken into account, which, for the most part, will be covered by finished products. That is, part of the finished product goes to fulfill obligations to investors, and part to sell at market value.

If the dev team do more interview session, with Q&A sessions giving the bounty team more resources to post, it will go a long way to improve PR activities.

Actually the website looks not very nice! But I like your idea, it is really new and attractive. wish success!!!

Thank you !
 :)

Hi! The question and answer is a good idea, but it will also require extra time from the developers. If they have resources, such as an additional person in their team to handle questions and answers, I think they are implementing it.

RWTStart Project.

Dear investors!
This is an important article for both the project and for you!
In this article I will describe our project, tell you how it was organized, by what we were guided when it was created, I will tell you shortly about the device RWT itself and answer all your questions. I hope that after reading this document, you will be able to appreciate the RWTStart project.
First, let’s talk about the RWT device.
I understand that for many people it is hard to believe in this, but something new always appears, something that was considered unbelievable earlier.
I spend almost 10 years for creation of this RWT device. You can make sure in this watching information on my channel Youtube. I removed a lot of information on the channel and left only the main videos. In the world there also exist working devices of this type from other people, but they are hidden from society. I think there is no use to talk about the reasons.
In the near future I will demonstrate RWT device to a group of people, for they could in reality see and evaluate the device. The report will be provided to you.

Continuation in the next post, in a few minutes.

We know that natural resources such as oil, gas, coal carry within themselves the energy we need. In fact, nature gives us this free of charge, but we have to pay for processing and delivery. It is necessary to use any natural element to obtain energy. Now think about it, an electric current is also the energy of the natural element electron. It is natural resource "deposit" present in any conductor. In order for gas or gasoline to ignite, we spend the minimum amount of energy and in return receive enormous energy. Since the electron is the same natural element carrying energy, to "flash" it minimum expenditure of energy is necessary. Everyone knows from elementary physics that, in order for a current to flow, tension is necessary. That’s the whole answer! The "igniter" of an electron is voltage, and voltage creation is easy and cheap. The voltage was given and the current flew through the load. At the same time, as much current as required by the load, it is like feeding a certain amount of fuel into the cylinders of the engine.

Continuation in the next post, in a few minutes.

Specially or intentionally, but initially people began to struggle with the output of the load as with the reaction force. But this is the energy that we ourselves caused. Instead of developing ways to bypass the influence of this force on the voltage source, that is, on the "igniter", people started to create generators giving out the same power as the load. From that moment, it became very profitable to be electricity supplier. Now the cost of electricity is determined by the manufacturer along with oil products, gas, and coal. Now you must understand why this direction does not develop and at the "high" level it is completely denied.

Continuation in the next post, in a few minutes

Project organization
Why blockchain.
Blockchain is used to obtain freedom and independence from the control of state structures and dispose funds at your own discretion, without fear that your account would be seized for some reason. Rare project takes fiat money. If only this project itself is not connected with the state or the bank.
Our project is a real start-up!

Continuation in the next post, in a few minutes

We have a minimum amount of $ 200,000, which is 12% of the maximum amount, according to the rules this is not enough, but depending on what to proceed. How one can apply general rules (recommendations) for different projects with different goals. In general why collect maximum funds if minimum specified amount is enough for the project? Each project may have its own answer to this question.
Here is the answer of our project.

Continuation in the next post, in a few minutes.

To create a laboratory to conduct all the studies, tests and gather different samples of the device, and also for creation of one assembly shop and material directly for the device, $ 200,000 is required is the minimum specified in the project.  At the same time, the estimated production capacity is determined within 30 RWT devices with a total output capacity of 30,000watt per day. This allows you to fulfill your obligations to investors for receiving the device in exchange for RWTS tokens in several months. At the same time, production expenses are taken into account, which, for the most part, will be covered by finished products. That is, part of the finished product goes to fulfill obligations to investors, and part to sell at market value.

Continuation in the next post, in a few minutes.

When collecting a larger amount from the minimum, shops will be created in different regions. Expenditures in different regions are different and therefore the number of assembly shops is difficult to determine, as well as different production capacities of the productions themselves. Investors with relatively large deposits can be involved in the process. This issue is not considered in detail at this stage.

Continuation in the next post, in a few minutes.

It takes time to implement the plans. Until the end of 2018, a laboratory will be created with all the conditions for development and testing of industrial designs. The current version of RWT is fully operational, but not tested for various loads and no design for the consumer is prepared. In the technical design of the RWT device, it is possible to use ready-made electronic units existing on the market. From 2019, will start work on the organization of production workshops. At the same time, samples for the consumer will be tested. In the second half of 2019 production will begin. Preparation of website interface with a personal cabinet for RWTS token owners, where exchange for the RWT device will take place.

Continuation in the next post, in a few minutes.

I hope the main issues are revealed in details. I am always ready to answer any of your questions.
Organizer of RWTStart project: Maxus Kudratov.

Previous part here >>> (https://bitcointalk.org/index.php?topic=3801788.msg38076745#msg38076745)

A new project for the construction of production, I am sure that very few people will pay attention to such a crude project, a team of three people, not one IT specialist, in addition a patent for such an aggregate is needed.

the problem with electricity is relevant and will remain as relevant when you have ico or has it already passed?

This is a really cool project. I believe in New York someone was able to use solar power and sell it to their neighbour for ETH. I think this is the way that the blockchain will evolve in the coming years. Best of luck

The article has good and valid points. But in reality, you can enumerate with your fingers only how many projects became successful in waves platform. Being in waves, it takes a lot of guts to achieve success. So good luck with your chosen platform!

Thanks  :)

In our team new members.
The process of patenting is long and expensive.Therefore, the patenting of the RWT device is possible only after conducting ICO.

 Dear team :
I would like send to to you your ANN, bounty thread by Vietnamese ::
Vietnamese_ANN thread link: https://bitcoingarden.org/forum/index.php?topic=38470.msg283993#msg283993
Vietnamese_Bounty thread link : https://bitcoingarden.org/forum/index.php?topic=38471.new#new
thanks team

Thanks .

What is your advantages from power ledger or we power? I don't understand why you are better than them?

Could you please share links to the alternative solutions you mentioned? This project is unique and I don't believe there are any analogues.

Perhaps the development of this device will be useful. But why is there no information about the team? The project is designed too badly and does not attract the attention of investors.

I'll wait for the updated information of FREE ENERGY RWTS.
I just have very basic questions:
1. I still dunno how much the price in USD per 1 token of RWTS.
2. When the ICO sale start and end?
thank you  

ICO begins on July, 2 and finishes on August, 10. Please visit our new website https://rwtstart.com/

1RWTS = $0.18

Our token isn't pegged against bitcoin course and with project development price for RWTS will only grow without reacting to cripto currency price fluctiation. Investment to RWTS is investment to energetics of the rising generation and it means win-win investment.

Each owner of RWTS tokens, from the moment of beginning of device producing can exchange tokens on device Real Watt Transformer(Transformer of Real Electric Power), be the exchange rate 1RWTS=1 Watt power of device. One token owner would be able to receive device(s) with general power not more than 5000 Watt but in the same time each can trade any number of tokens. Limitation in token exchange for device allows spreading it among a lot of people and with minimal cost on the beginning stage of producing. Close to producing beginning of RWTS token will compoundly grow that gives huge advantage for the future owners of the device as well as for device owners and token owners. Project realization with the help of block chain technology will help to fasten the process of technology development and spreading, avoiding monopolization and full concealing of technical information and also helps to partially avoid bureaucratic barriers.
Our token isn’t pegged against bitcoin course and with project development price for RWTS will only grow without reacting to cripto currency price fluctiation. Investment to RWTS is investment to energetics of the rising generation and it means win-win investment.

Calendar of plan completion

It takes time to implement the plans. Until the end of 2018, a laboratory will be created with all the conditions for development and testing of industrial designs. The current version of RWT is fully operational, but not tested for various loads and no design for the consumer is prepared. In the technical design of the RWT device, it is possible to use ready-made electronic units existing on the market. Application submittion for RWTS device patenting. From 2019, will start work on the organization of production workshops. At the same time, samples for the consumer will be tested. In the second half of 2019 production will begin. Preparation of website interface with a personal cabinet for RWTS token owners, where exchange for the RWT device will take place.

Each owner of RWTS tokens, from the moment of beginning of device producing can exchange tokens on device Real Watt Transformer be the exchange rate Watt power of device. One token owner would be able to receive device with general power not more than 5000 Watt but in the same time each can trade any number of tokens. Limitation in token exchange for device allows spreading it among a lot of people and with minimal cost on the beginning stage of producing. Close to producing beginning of RWTS token will compoundly grow that gives huge advantage for the future owners of the device as well as for device owners and token owners.

Devs, don't you plan to make your own slack channel? It can increase your score at different ICO trackers.

Starting from the end of 2019 we will start production of the device, token exchange for our RWT device will take place. In this regard, creation of application does not make sense.

Please visit our new website https://rwtstart.com/

Very interesting project, has a concept about the electric power RWTS real power transformer, in the life of electricity is one of the main needs for people around the world, in this project bountynya program will be crowded and many supporters, this project is in need of a big boost both from his team and the investors, the future will be this project will get a very bright prospect. hopefully good luck.

a good project with the theme of electric power real electric transformer RWTS, electricity is one of the main needs for people around the world, But softcapnya target very little, just $ 200,000 just in need. I hope the ICO sold out until it reaches the Hardcap target so that its project can be realized and can be used by many people.

In order to start producing minimum number of devices, we need $ 200,000. But the device will be produced in small amount. Of course, it is desirable to collect as big sum as possible and we hope that this will happen.

3000 RWTS = 3000 Watt = 1,21 ETH  Do I understand correctly?
I think your products are perfect for miners and private houses.

Our product are perfect for all !!!  :)

That sounds great, this project has a very nice concept with very useful and helpful to every individuals in the community. As we all know is the one of the basic need of human being.  They creates a new  technology that is very effective energy use that enables lessen the consumption of expenditure from 3 to 5 times.  Hopefully they can reach softcap and the hardcap. Good Luck!!!

Thank you !  :)

you have a very promising direction of the project. But investing in this project is very risky. I looked at the site, you have only a concept and maybe an industrial design. the implementation of this project is very doubtful.

We have a working model, which has no analogue.
To implement the project, complex and expensive equipment is not required.
There are no complex structures in the device.
The implementation of the project is not very difficult.
Therefore, the risks are minimal.

all investment projects indeed have risks, but if his team want to work hard and be compact I think it could make a project can succeed

Each owner of RWTS tokens, from the moment of beginning of device producing can exchange tokens on device Real Watt Transformer  (TRANSFORMER OF REALELECTRIC POWER), be the exchange rate 1 RWTS=1 Watt power of device.

calculate price  https://rwtstart.com/?page_id=3904

I like the idea of your project. Tell me, please, what is the minimum amount needed to start investing in the project? What is the advantage of this project than onther projects?

This project is unique and I don't believe there are any analogues.
Minimum deposit amount is 0.033Eth.
If you want to get a 1000 Watt device: 1000 RWTS = 1000Watt = 0.33Eth

What is the minimum/maximum amount you can invest in the crowdsale and what will happen to the unsold tokens?

good question what will happen with unsold tokens will be burned, distributed among investors, used for airdrops or further advertising?

Minimum deposit amount is 0.033 Eth.
Tokens are issued only when paid.
Unnecessary tokens do not remain.

Tokens are issued only when paid.
Unnecessary tokens do not remain.

https://i.imgur.com/RgFLhOl.jpg

3000 RWTS = 3000 Watt = 0.99 ETH  :)

https://t.me/RWTStart

https://twitter.com/RWTStart

https://www.youtube.com/c/RWTStart

2) In case of not reaching the softcap amount and ICO ending, the investor can get back his invested funds.

 function refund() external {  
      require(this.balance < softcap && now > enddate); // not reaching the softcap amount and ICO ending
      uint value = balances[msg.sender];
      balances[msg.sender] = 0;
      msg.sender.transfer(value); //get back his invested funds
    }

Tell me, please, such question, whether dividends will be added to holders of tokens of the given project?
Invest in the RWTS-FREE ENERGY project is promising. If large investors come this is good. Small private investors are even better. They will complement each other and the token will be more stable.

Bonus 35% Jily 2 – July 12
http://rwtstart.com/?page_id=3904

Each owner of RWTS tokens, from the moment of beginning of device producing can exchange tokens on device Real Watt Transformer(Transformer of Real Electric Power), be the exchange rate 1RWTS=1 Watt power of device. One token owner would be able to receive device(s) with general power not more than 5000 Watt but in the same time each can trade any number of tokens. Limitation in token exchange for device allows spreading it among a lot of people and with minimal cost on the beginning stage of producing. Close to producing beginning of RWTS token will compoundly grow that gives huge advantage for the future owners of the device as well as for device owners and token owners.

i just watched the two videos are very interesting, so the implementation, the transformers do not cost so much, and then we have the low cost energy,great

Today it's cheap but it will be more expensive in future.
Only for investors it's cheap.

We know that natural resources such as oil, gas, coal carry within themselves the energy we need. In fact, nature gives us this free of charge, but we have to pay for processing and delivery. It is necessary to use any natural element to obtain energy. Now think about it, an electric current is also the energy of the natural element electron. It is natural resource "deposit" present in any conductor. In order for gas or gasoline to ignite, we spend the minimum amount of energy and in return receive enormous energy. Since the electron is the same natural element carrying energy, to "flash" it minimum expenditure of energy is necessary. Everyone knows from elementary physics that, in order for a current to flow, tension is necessary. That’s the whole answer! The "igniter" of an electron is voltage, and voltage creation is easy and cheap. The voltage was given and the current flew through the load. At the same time, as much current as required by the load, it is like feeding a certain amount of fuel into the cylinders of the engine.

Specially or intentionally, but initially people began to struggle with the output of the load as with the reaction force. But this is the energy that we ourselves caused. Instead of developing ways to bypass the influence of this force on the voltage source, that is, on the "igniter", people started to create generators giving out the same power as the load. From that moment, it became very profitable to be electricity supplier. Now the cost of electricity is determined by the manufacturer along with oil products, gas, and coal. Now you must understand why this direction does not develop and at the "high" level it is completely denied.

Technical part

1. Power of the source passing the primary choke creates magnetic field of certain tension that in its turn induces on the secondary choke.
2. Connected load leads to power appearing on the secondary load. The load does not consume the source power. The source power and the load power are different powers. 
3. Magnetic current created by load power is contrary to magnetic current of the primary choke and leads to lowering of its inductivity and correspondingly to lowering reactance that in its turn increases power consumption from the source and rise of magnetic tension to the full compensation of countermoving magnetic current. 
4. Value of magnetic induction current in transformer by blank run and with load remains unchanged.

In order for the connected appliance not to lower the inductance of the primary transformer choke and, accordingly, the current consumption not to increase, it is necessary to minimize the impact of the counter magnetic current created by this electrical appliance. As a result, only acting magnetic field created by power of blank run will remain in the transformer. As we have already understood, this magnetic field is sufficient to maintain the voltage on the output choke with the load connected, which corresponds to the design capacity of the transformer. Under this condition, the appliance will operate at its rated power, and the source will give power only to maintain the required voltage. In this mode of operation of the transformer, there are no violations of the physic laws.
The work of REAL WATT TRANSFORMER is based on the principle of manipulating magnetic currents. Demonstration video of REAL WATT TRANSFORMER on the channel of the project https://www.YouTube.com/c/RWTStart  https://youtu.be/Ub5v82kyqo8

Each owner of RWTS tokens, from the moment of beginning of device producing can exchange tokens on device Real Watt Transformer  (TRANSFORMER OF REALELECTRIC POWER), be the exchange rate 1 RWTS=1 Watt power of device.

3000 RWTS = 3000 Watt = 0.99 ETH

Thank you !  :)

Contract description.

Due to fluctuations in Ethereum rate, we decided to apply an average price between $ 400 and $ 700 for 1Eth. As a result we get 1 Eth = $ 550. Price for 1 RWTS = 0.00033 Eth.

Throughout the whole ICO, all of investors' investments are stored on the contract basis and transfer to the project account will be possible only by reaching the softcap

In case of not reaching the softcap amount and ICO ending, the investor can get back his invested funds.

At the end of ICO, there will be additionally issued 5% of all the tokens sold, which are intended for payment to members of Baunty company and other expenses for the project promotion.

From the ICO beginning and until July 12, investors get additional bonus in the volume of 35% from his contribution

Minimum deposit amount is 0.033 Eth.

i have yet to understand well the potentialities of this magnetic current that passes without energy expenditure the current from a first generator to a second one, i will give a more thorough overview

Our token isn't pegged against bitcoin course and with project development price for RWTS will only grow without reacting to cripto currency price fluctiation. Investment to RWTS is investment to energetics of the rising generation and it means win-win investment

Our project does not have a lot of PR, but it's real and very profitable. Our goal is not just to collect as much money as possible, but also to get help from you for implementation of our plans. I hope investors will see and understand this.

wow what a long and detailed explanation, so the electrons under certain conditions can generate electricity independently, we could see a video of a demo of the transformer? it would be very interesting

Demonstration  https://youtu.be/Ub5v82kyqo8
Principle  https://youtu.be/FXXSsb9oasc
500 Watt  https://youtu.be/lQGxYs0WPCI

How beneficial is RWT (TRANSFORMER OF REAL ELECTRIC POWER) device?At the moment, cost of such devices as wind generators or solar panels is approximately $ 100 per 100 watts of power. It is also necessary to consider the cost of additional equipment, that is battery and inverter. RWT does not always require battery and inverter and does not need wind or sunlight at all.
The proposed cost of RWT device up to date is $ 0.18x100vatt = $ 18. This is 5.5 times cheaper than wind generators or solar panels.
RWT can be used not only as separate device, but also in conjunction with wind generator or solar battery. And then there is 3-5 times more power at the output!
Example: wind generator or solar panel (1000 watt) >>> RWT (x3-x5) >>> load 3000-5000 watt

https://i.imgur.com/DhroFUj.jpg

The market value of RWT will be higher than wind generators or solar panels, and this adds advantage to RWTS token owners.
RWTS token holders will not only receive RWT device at low price but can also earn trading RWTS on exchange.

like his project is very interesting and unique I can monitor in advance because this project concerns the electronic thing and it's my hobby

RWT is powered by UPS, which in turn is connected to a 220-volt load of incandescent lamps with a total power of 120 Watts.
The total cost of power on the power supply UPS battery (and at the RWT input) is 3 times less than power on which the load operates.

https://i.imgur.com/N44rtCX.jpg

https://i.imgur.com/SZOJix8.jpg

wow really interesting and impressive i never imagined that we can save so much on electricity (up to 3 times) and in a relatively simple way, is a winning project in my opinion

 
https://i.imgur.com/dSR8EiR.jpg

https://i.imgur.com/cOSBRZG.jpg

You are offering an innovative product that has no analogues in the world! In Europe, if you use solar panels, you can sell 3-5 times more electricity to the state.  ;D

Are you planning airdrops?

yes the project is really original there nothing like that, with the transformer rwt we can really save on electricity,will be a great success and also will have a large distribution in my opinion

No

Each owner of RWTS tokens, from the moment of beginning of device producing can exchange tokens on device Real Watt Transformer(Transformer of Real Electric Power), be the exchange rate 1RWTS=1 Watt power of device. One token owner would be able to receive device(s) with general power not more than 5000 Watt but in the same time each can trade any number of tokens. Limitation in token exchange for device allows spreading it among a lot of people and with minimal cost on the beginning stage of producing. Close to producing beginning of RWTS token will compoundly grow that gives huge advantage for the future owners of the device as well as for device owners and token owners. Project realization with the help of block chain technology will help to fasten the process of technology development and spreading, avoiding monopolization and full concealing of technical information and also helps to partially avoid bureaucratic barriers.

so the project will not continue if the soft cap will not be reached, i hope it will be reached and the project continues because in my opinion has great potential, so the tokens are minable?

The second semester of 2018 – Creating of modern research laboratory, device designing with maximal possible coefficient of effectiveness and different power (approximately from 250 to 3000 Watt of switched load power).  Application submittion for RWTS device patenting.

The first semester of 2019 – Trial model testing for producing. Organization and preparing of small adjusting shops in regions.

The second semester of 2019 – Preparation of website for RWTS token exchange for devices Real Watt Transformer.  Start of producing. Token exchange.

To create a laboratory to conduct all the studies, tests and gather different samples of the device, and also for creation of one assembly shop and material directly for the device, $ 200,000 is required is the minimum specified in the project.  At the same time, the estimated production capacity is determined within 30 RWT devices with a total output capacity of 30,000watt per day. This allows you to fulfill your obligations to investors for receiving the device in exchange for RWTS tokens in several months. At the same time, production expenses are taken into account, which, for the most part, will be covered by finished products. That is, part of the finished product goes to fulfill obligations to investors, and part to sell at market value.
When collecting a larger amount from the minimum, shops will be created in different regions. Expenditures in different regions are different and therefore the number of assembly shops is difficult to determine, as well as different production capacities of the productions themselves. Investors with relatively large deposits can be involved in the process. This issue is not considered in detail at this stage.

so the production of transformers and the listing of tokens on exchanges will be in the second half of 2019, well a medium/long term project

The work of REAL WATT TRANSFORMER is based on the principle of manipulating magnetic currents. Demonstration video of REAL WATT TRANSFORMER on the channel of the project  https://www.YouTube.com/c/RWTStart
Demonstration  https://youtu.be/Ub5v82kyqo8
Principle  https://youtu.be/FXXSsb9oasc
500 Watt  https://youtu.be/lQGxYs0WPCI

We offer real device. Something that you will be able to hold in your hands and benefit from it.You will save electricity and in some cases you will not depend on electricity suppliers at all. In addition, you can profit by trading RWTS tokens. You can also purchase more tokens and then exchange them for the devices for your loved ones, relatives or friends. Do not forget that maining (mining ) consumes large amount of electricity, and using the RWT device your profits will increase in accordance with reduction of electricity costs.

Demonstration  https://youtu.be/Ub5v82kyqo8
Principle  https://youtu.be/FXXSsb9oasc
500 Watt  https://youtu.be/lQGxYs0WPCI

there are very beautiful videos where are explained and shown very detailed the set of the project

Each owner of RWTS tokens, from the moment of beginning of device producing can exchange tokens on device Real Watt Transformer  (TRANSFORMER OF REALELECTRIC POWER), be the exchange rate 1 RWTS=1 Watt power of device.

3000 RWTS = 3000 Watt = 0.99 ETH

The second semester of 2018 – Creating of modern research laboratory, device designing with maximal possible coefficient of effectiveness and different power (approximately from 250 to 3000 Watt of switched load power).  Application submittion for RWTS device patenting.

The first semester of 2019 – Trial model testing for producing. Organization and preparing of small adjusting shops in regions.

The second semester of 2019 – Preparation of website for RWTS token exchange for devices Real Watt Transformer.  Start of producing. Token exchange.

To create a laboratory to conduct all the studies, tests and gather different samples of the device, and also for creation of one assembly shop and material directly for the device, $ 200,000 is required is the minimum specified in the project.  At the same time, the estimated production capacity is determined within 30 RWT devices with a total output capacity of 30,000watt per day. This allows you to fulfill your obligations to investors for receiving the device in exchange for RWTS tokens in several months. At the same time, production expenses are taken into account, which, for the most part, will be covered by finished products. That is, part of the finished product goes to fulfill obligations to investors, and part to sell at market value.
When collecting a larger amount from the minimum, shops will be created in different regions. Expenditures in different regions are different and therefore the number of assembly shops is difficult to determine, as well as different production capacities of the productions themselves. Investors with relatively large deposits can be involved in the process. This issue is not considered in detail at this stage.

the realization of the project is quite complex, 200k does not seem a figure too high,and in my opinion is feasible, so if ico collect more funds will be  opened more shops and there will be more expansion/distribution, it will be nice

Let's draw an analogy between household gas and electric current.
Earlier I compared current with gasoline. In fact, everything is the same. I believe that the electric current, as well as gasoline (oil), natural gas, coal! water! etc, is fuel. Fuel of natural origin, which does not require extraction and processing. This type of fuel is in any conductive material (conductor). We will not talk about electrons and their charges. Just try to accept it as a kind of fuel, locked inside the conductor, as well as the gas in the tank.
The gas itself does not carry any energy, but you just need to give a spark and it will ignite and burn, but only if there is a constant presence of oxygen. The more we open the cylinder valve, the more gas will burn and the more energy will be released in the form of heat (and in a closed container, pressure). If the ignition occurs in closed container, then for certain amount of gas certain amount of oxygen will be required.
Practically the same process with the electric power.
Container with "gas" is conductor, voltage is "oxygen", and the connected load is valve that regulates "gas" supply (passage). There is a lot of fuel in the conductor, and what amount will "burn" depends on the voltage (the amount of oxygen supplied) and the load (valve). The circuit closing is a "spark for ignition". Gas in the tank is not infinite, and the conductor is also depleted and eventually sticks.
Now let's move to the work of our current ("gas").
Understanding of an ordinary person - we get current from the source, such as household electricity (talking about conventional household devices). We plug the lamp cord into the socket, the current goes and the lamp lights up. Now to understand what is really going on, we need to put a transformer between the lamp and the socket. Many will say what does it have to do with the transformer. In fact we are all connected through the transformer, in any household there is a transformer box, and from it there are "extensions" to the switchboard and then to the apartments. It is all the same in private houses and everywhere in general. Transformers in booths are connected to other more powerful ones, etc. to the electro-generation station itself. We put our transformer, so that everything would be clearer and more understandable. The transformer completely unleashes the load from the source, that is, our load is not physically connected to the previous source. There is primary coil connected to the source, in our case to the socket and secondary coil to which our light bulb is connected. These two coils do not have any electrical connection, they are isolated from each other. The voltage ("oxygen") applied to the primary coil, which is closed (a spark for ignition), creates current in it (gas combustion), the valve is the coil itself (it has its inductance and resistance both reactive and active). This current in its turn generates magnetic field. This magnetic field induces EMF (voltage) on the secondary coil. Here pay attention - the magnetic field induces EMF, appears voltage ("oxygen") on the secondary coil, but there is no current (combustion of the gas does not occur, but conditions are created). Turning on the light bulb, the circuit closes and current begins to flow (ignition and combustion occur). The current is created by the load, it did not come from the primary winding and was not transmitted by the magnetic field. Depending on the induction of magnetic field, the voltage on the secondary coil of our transformer and its power will depend. To create a powerful induction, no large current consumption is required. Ordinary transformer requires 10-15% of the power from its nominal to create magnetic induction 1-1.5 Tesla. For you to understand what 1 Tesla is - Medical device MRT has magnetic field from 0.8 to 1.5 Tesla.
So why does the current consumption by the primary coil of the transformer increase?

https://i.imgur.com/bpJf5sM.jpg

As I said above, the winding of the transformer has its inductance and accordingly reactance (not be confused we will say just resistance). This resistance depends on inductance and frequency of the current (we have 50Hz). Connecting the load to the secondary coil of the transformer the current, which also creates magnetic field, starts to flow, but opposite to the direction of magnetic flux of the primary. Because of this, the inductance of the primary decreases and accordingly the resistance decreases, which leads to increasing of current consumption. Although this power (this current) is not used to maintain the glowing of the light bulb, but only strengthens primary magnetic field. As a result, the total acting magnetic field will always be equal to the magnetic field created by blank run current, that is, no matter, whether we have light bulb connected or not. In fact, we spend most part of energy from the source, due to decreasing in inductance, not because of the load demand.

https://i.imgur.com/LLjonNU.jpg

My transformer is made in such a way that effect of the magnetic flux created by the load decreases significantly and may even not function at all. The system is very simple, but at the same time, there are some subtleties and dependencies between field interference. Decreasing influence - we lose tension. However, it all can be solved 
Why did I draw parallel between gas and current? As everyone understands, energy is not taken from somewhere, the law of energy preservation has not yet been canceled. Then where does the current flow from to the load if it does not come from the source? The conductor contains a natural element (electron), which under certain conditions (voltage and closure through the load) releases energy.

Maxsus Kudratov

http://telegra.ph/Lets-draw-an-analogy-between-household-gas-and-electric-current-07-09