Bitcoin Forum

The specifications:

Working Mode      BTC             LTC              Power
Dual Mode       2.5GH/s            200KH/s        60 Watts
LTC Mode               OFF            300KH/s      7 Watts

Pricing will be:
BTC0.35 per device -> Shipping Included

Hosting:
BTC0.1 yearly per device

PayPal will be accepted.
*For PayPal Please pm me your email address and amount so I can send you an invoice.
$275.00 each <- Shipping included. (I will only ship to address that are on the paypal site)

Shipping:
These will be shipping out of Texas/USA


Power supply that is used to power these.
http://www.superbrightleds.com/moreinfo/enclosed-power-supplies/12vdc-enclosed-power-supply/70/

Please PM me your address and TX Id.
Any discrepancies will need a verified signature from said address.

This is a group buy. So once we hit our first 10 units sold target then I can place the order. Shipping from the distributer on February 19th .

**Not my image. This is what they look like****Copyright to respectful owner**
http://www.bitcoinguru.com.au/uploads/2/5/8/4/25849432/8849414_orig.jpg

To be clear: this is a 5-chip unit, so it will hash scrypt at 5 x 300KH/s, right ?

Each chip hashes at ~70 KH/s so this 5-chip unit hashes at ~300-350 KH/s.

If you look at the single chip USB, that's the speed listed and reported by the testers.

That is correct.

Is it? 5x300Kh/s is 1500Kh/s.

total output 300kh

Each GridChip does about 70kh/s so a unit with 5 chips should do 70kh/S * 5 = about 350kh/s

I'm up for 1 of these. Submitting payment shortly.

Is the .405BTC just for the mining units?  Or do we also get things like the controller, PSU, all needed cables, USB hub, etc?

dude all you need is a USB cable if they don't already include it.

I don't believe that to be the case...these units draw a significant amount of power...please review the last few pages of the litecointalk thread (https://litecointalk.org/index.php?topic=13314.0).  The user TheMage, did a review of these devices.  He needed to splice wires in order to get this connected to his PSU. I don't have a spare PSU, and I'd like to use the "controller" this is supposed to come with to help cut down over all power usage.

Thus, it seems theres a "controller" module which can manage up to 20 of these devices...it would be nice to know if this is included in the price or not...

Additionally, I don't have a 10 port powered USB hub laying around...so if it's not part of this purchase price, I'd like to know so I can buy one and how much it costs in addition to the .405BTC/device...

So if this offer includes all the extra bits and pieces to get 10 of these up and running, then its still pricey but much better than having to shell out even more $ to buy all the ancillary parts.

within first three lines

2.5w@usb vbus

wouldn't make much sense to have a psu for 2.5w

Tagging Post, I'm interested

Okay I am on beastly mac's page to get one  and  I want the one from him. I paid him the coins already.

But if you need me to order 1 from you, I will just so you get to 10 faster. I could push to two if you need the btc.
If you don't need it let me know via PM.

I am in the Superbowl state of New Jersey.  I have coins ready to send.

Please reserve me 1 I will send the payment in about 1 hour just waiting for the coins to confirm into the account I will pay you form.

I don't believe that's accurate...all the threads covering this exact product seem to indicate power consumption at much higher values...go read asiabtc's thread here (https://litecointalk.org/index.php?topic=13314.0).  All these group buys are selling the same devices...and the "lowest" power operation for this would be to run only in scrypt mode at 8 watts and 60 watts for "dual" mode...So yes, you do need some kind of power supply...hence the reason TheMage (in that same thread) had to splice wires and connect it to his computer's PSU.

I see what you are talking about. Definitely not a stand alone item.

Pm sent.

Now for those that are talking about the control module. If you have a windows computer then you don't need a controler.
They come with a usb cable and power cable.
I am finding out right now exactly what they need to be powered.

Here is a unboxing http://www.youtube.com/watch?v=hkrFASloaOU

I am in for one. Sending payment now.

received.

what software is used to run these and the usb devices?  Hoping multiminer will update to run them :)

I think i'm in for 1 of these,  but will take a day or two to grab funds, if I have to get in batch2 let me know, but count me in for 1.

Yes, But I will have to change it over to BTC anyhow.


I am finding out on the software right now.

The miner come with a modified version of CPU miner.

If you want to dual mine, you need the wiibox (controller) plus a relay unit (handles frequent reboots) and more power either USB hubs or PSU.  The units not utilizing the wiibox are only mining sycript.

http://bbs.diginforce.com/forum.php?mod=viewthread&tid=51

What is the best way to power one of these?

I'd like one please.  Sending payment now.

^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

Received and updated main OP.

Ill take 2 any shipping or volume discount if I buy more?

No, sorry.

We have met our 10 unit batch limit. Please start to get your payments in.

For all new orders until batch 2 comes around please pay at time of reservation.

You have till February 6th 2014

Can you provide more details about this please? Are you taking orders for another 10 units? Will they ship the same time as the 1st round as long as you have payment by Feb 6th?
Thanks
DBA

What I am saying is if you pay now you will be included with batch 1. Batch 2 will start after Feb 6th.
Sorry for the missunderstanding.  8)

My math might be wrong but I'm seeing 0.002 BTC/day with 160kh/s. This is 350kh/s, so 0.004 BTC/day. It will take you 100 days to recoup the investment (assuming difficulty doesn't rocket). Am I missing something - is there some reason why this is a great deal?

Cheaper than rig power, also I can see these prices dropping anyhow.

First ones always pay more.

I have a feeling there will be a lot of cheaper R9's and 79's soon.

Fair enough but it still seems iffy.  It will be awesome if R9's and 79's drop. I need a new gaming rig

Ok doing some more calculations these miners shouldn't really be more than 0.25BTC if folks want to recoup their investment :(

I perfer the usb stick version, but those prices need to drop too. 10 usb should be about the price of a r9

So, I'll wait to order more when the "fad" is over.

Still missing payments from
drof69 : BTC0.472
krodmandoon : BTC0.472
mattminer83 : BTC0.944

If you want to be included in Batch 1 and before or at the February 6th 2014 cut off date. Please send payment with your reservation

If some of them dont pay let me know Ill take 2 more to help fill the Gorup buy Ill keep the funds ready to send just incase they dont send in time PM me

Ordered 1, payment and PM sent.

If you are showing as not paid or the amount is incorrect please send me the tx id of your transaction. Thanks.

The whole order will be put in tomorrow thursday evening.

Do you know how many of these you can run off a USB hub?  I have one on order, but wondering if I add more, how that's going to work with power.  All the 10 and 20 unit vids I can see have some type of PSU powering them, not a USB hub.  I plan to get more, so would like to start getting the pieces I need in place.  if I can just connect 10 of these to a USB hub, sounds good, but I don't think that's going to work?

Looks like each puck will use about 6w of power, from what I can see, 10x of them use 60w in scrypt mode.  So if you are running one or two off a USB port, probably going to be fine, if you want to run many of these, you will need some form of PSU.

Anyone know what recommended PSU is used with these if you want to start with 1x and move up to 4x or more?

Can I get bare chips?

they will need a seprate PSU
I am just a reseller for the distributer.

Great I am looking forward to testing them out

I cannot wait to get mine in as well.

I have done a lot of searching and haven't been able to get a straight answer on what I need to use my unit when it comes.  I've seen conflicting information about what can power these.

I am planning on running this unit in LTC mode only.  Some people have suggested the USB is enough to power the device in LTC only mode?  Is this true?

If not, what kind of PSU do you need to power it?  Some sort of AC adapter?  Molex?  I have a PSU powering 2 cubes that has more than enough power to run this although I would not like to splice wires if there's any way around it.

So far I have a 10 port powered USB hub (Rosewill), the USB cables and a Windows PC to run the DualMiner software.

What else do I need?  Am I going to have to splice PSU cables or is there a AC adapter for sale somewhere?  If so any links would be appreciated so I can buy what I need now and have the unit running as soon as it arrives.  I have a bunch of DHUB-H7 power adapters that aren't being used as well.

Thank you in advance and if I missed a topic that covers this a link would be appreciated.

Please go checkout the videos posted here: https://litecointalk.org/index.php?topic=14956 

Seems like user hashware already has these and posted a few clips of the devices...assuming this GB is the same as what he ordered and shows in his videos, it looks like it comes with PSU, the devices, and various cables...I think the only thing I didn't see in that video was a powered 10port USB hub.

I too am interested on how to properly power these things.

Cant wait to get mine.

Will there be a GB#2 for this product sometime soon?

Yes there will be. It will be a few days.

Thank you very much.

I hope it still comes with the power supply if you ordered 1 unit since it looks like when this guy hooked it up to a 12V PSU it fried his unit!

What is the hashrate for one of those?

300khs but new firmware is being tested and has reached 500-600khs

OOOOoooooOOOOO kinky.  :o 8)

Is it new firmware or is a new board which just has 2x as many chips on it?  I was under the impression that Gridseed was going to create a new board with more chips (thus reach higher hash numbers) and drop it into a typical ATX style case...Am I completely mistaken???

New firmware.

Wow!  I'm speechless...I bought the LA3M which is 10 of these....I can't wait for the new firmware to be released....uh I guess I should wait till I get these in my hot little hands before I get all crazy abou the new firmware, huh? :P

See and some feared being an early adopter was foolish if the hash rate can double with new FW then I think a lot more people are going to start wanting them :)

Hi Worldly:

did you have to pay import duties on your order? They are asking me what I want them to invoice? Is this a way to get the duty down? (there may be something lost in translation....)

Batch #2 coming soon!
 ;D ;D ;D ;D ;D ;D ;D ;D ;D

I don't know..I paid 3.44BTC (~$2750USD) so I presume when I get them I'd pay import duties?  I don't know the rules for having stuff sent from China to the US.  I havent' got the package yet so I don't know...this is the first time ever I've had something sent to me from outside the US...so its a whole new adventure.

I've had stuff sent to me from china and never had any issues or had to pay import tax. But i cannot tell you its always the same.

Is there an update on shipping?

Possible I should have them by the end of this week so should be shipping out to yaw by the beginning of next week.


Batch #2 NOW OPEN!
Accepting PayPal as well. Please check main OP for pricing.

sent pm, Interested in 4.

In answer to Customs, there is no Import fees on electronic goods.

El

Need your email to send the invoice to.

Sending over payment for 2.

recived and updated main OP

16 units already reserved and paid for. Very good start to batch 2  :o ;D 8)

Hey demonmaestro,

Would you verify the address for Batch 2 orders?  I ask because I am paying for 4 units and checked the blockchain (https://blockchain.info/address/14K3Gvub5xDvSJ6igFYvLj8HwJ3jc1r4bx) to verify the address for 16 units already paid, and there is only 1.15BTC that has gone to that address.

I want to send my payment to the correct place.   ;)

Because 14 of those units were paypal...  8)
Yes the address is correct.

Crap. missed batch 1 and now ordered LA3M, and no funds for more ATM.

Asiabtc just said he may have hit USD quota though, so I'll put an order for 5 in very, very tentatively if that's OK.

PM sent with info of shipping and payment of 4 units.

Thanks.

received and confirmed.  :o ;D

Pm sent.  Quick response.  Paid for 1.  Thanks!

Received and confirmed.  8)

For those asking about power. 
here is the power supply that is used in the photo's and is a fairly standard industrial power supply 30 Amp will drive 5
in either mode. and be safe. if you are going to stay in scrypt mode exclusively .5 amps per unit can safely run more
than probably be secured without connection issues. (could in theory connect 60 although I always allow 10% on continuous rating)

http://www.amazon.com/Universal-Regulated-Switching-Computer-Project/dp/B00D7CWSCG/ref=sr_1_1?ie=UTF8&qid=1392141141&sr=8-1&keywords=power+supply+12v+30amp

This power supply will allow you to run 15 at full power.  (slightly more actually)

http://www.amazon.com/Meanwell-Switching-Power-Constant-Ledwholesalers/dp/B007K4XZPG/ref=pd_rhf_dp_s_cp_5_YDA1?ie=UTF8&refRID=0EKYF1P7NQRC16GCXEE6

Would be interesting to see the power draw on the new firmware to allow for calcultions on a power supply:) although the 30 amp one would
be a very safe range if staying on scrypt, I don't see it going above 12 watts per unit. at that you could drive 27 without issue.

BTW a fairly standard laptop power supply would drive one of these. 

El

The Guy that works on the equipment that makes Computer Chips.  Wet/Diffusion/Epi/CMP

Here is a wonderful question...

I assume you are ordering a min of 10 because they are sold in 10 qty with a controller like all the other listings from Gridseed resellers?

http://www.aliexpress.com/item/world-first-GridSeed-litecoin-bitcoin-miner-fast-shipping/1625115981.html

If someone buys a 10 qty will you also be sending the other pieces or are you buying them as individual miners?

paid for 2 via btc.

transaction hash:
5e1fbad759cbe53625bbcd92de837e2dc2e7732217068435728880a0458c0d23

I don't know if I asked this, but the grids come with the power lead, and the usb cable?

when is Batch2 deadline?

well considering we already met our quota. but as soon as the distributer lets me put in the payment for batch 2. so far they are waiting to get all of batch 1 shipped out.

To my knowlage yes they should come with the usb cable and power lead.

put me down for 1 on batch2 too, sending btc now, will pm you

Please put me down for 1 as well.

I will send the BTC in the AM after it has all transferred to my main payout address.

Please 1 in for me for the second batch. I am sending now.

pm sent.

please acknowledge payment...

1.15 btc sent over 14 hours ago via coinbase with 106 confirmations currently

transaction:
https://blockchain.info/tx/5e1fbad759cbe53625bbcd92de837e2dc2e7732217068435728880a0458c0d23

block:
https://blockchain.info/block/000000000000000148f4c1fd20903109c7d9b0bc442d82e1ea7fe337c6c1d53a

Hey group 1 buyer here, I'll take one for group 2 as well.  Payment sending soon!

Thanks

ill have 10  how do i pay and when are they shipping?

Use the BTC address or PayPal. depends on how you want to pay.

Main op updated. If your name is not on the list and you have paid please pm me your TX id or Invoice number with full name.

Thank you very very much sir.  I have been trying to figure out how I'm going to power this unit for days.  I sprung for the 12V30A as I would like to purchase a few additional units down the line.

You said a fairly standard laptop power supply would drive one of these.  Did you mean the Gridseed unit or the power supply itself?

What do I need to drive the power supply?  I don't see a standard plug on the power supply in the pictures I have seen of people mining with these.  I have seen two (sometimes three) wires connected to the AC.  I assume I need something else to take the power from the wall into those AC inputs.  What do I need to power the 12V 30A power supply from the wall?  (I'm in the US if it helps on the type of power brick I need).

Sorry if these questions seem ridiculous.  I've been mining for a while first with USBs on MinePeon and now with cubes connected to the GS800 Corsair power supply.  However, this Gridseed unit has been a jump above my knowledge.  If you could link me to what I need I would appreciate it.  Also if you could PM me an address I'd like to send you a small tip.

take a look at this
http://www.superbrightleds.com/moreinfo/enclosed-power-supplies/12vdc-enclosed-power-supply/70/

That is it.  Thank you so much demonmaestro.  I didn't notice in the link you sent me that the power supply cord had the ends split.  I thought it was a standard ATX power supply cord.

Hopefully this information helps out everyone trying to figure out how to power their units once they arrive.

What is the deadline for batch 2 payment and expected delivery of batch 2? I'm in for 2 ASIC scrypt miners. Collecting coins, should be capable to pay today or latest tomorrow. Should I speed up?

so far still waiting for batch 1 miners to come in. the distributor should be getting them in here soon and then off to me.
So as far as a deadline there is not one as of yet. But that can change quick. All depends on when the distributor lets me put in a batch 2 order.

Thx, I'm relaxed now. Hope You will announce the deadline for payment.

I tam thinking by the end of this week or hopefully by the middle of next week i should know something.

2for me shipping to uk

Sorry USA only.

:(

sorry to take so long had a doctor appt today.

1st answer would be to drive the grid seed.
I see Demonmaestro answered the question on what power cord is needed. 
(DON'T do A two wire only connection, make sure to connect ground and the neutral and hot) on the incoming power.

on the power cable from the site Demonmaestro pointed to.  the boxes would have L N and the ground symbol. Ground goes to green, N to white and L to Black.

El


 

PM sent, in for one please.

if prices keep dropping I will have to ask for more BTCBTCBTC. Those that paid via PayPal is still fine.

Just let us know, if that's the case and it's significant I'll just take a refund.  Will let you know when the time comes.

Is OP price of 0.55BTC each still valid for batch2?

i thought the price was 0.472

I'm down for 4.

still confused on what exactly i would need to run these. just the power supply you are linking? eveything else will be provided ?

run them is the psu that i put on the main op.
If you are going to run them off of a windows machine then just plug the cable in the usb slot.

they were 0.472 for batch 1.

although with BTC dropping the price had to go up.

2 questions for you. First, if plugging these into a windows do they require a separate power supply for each unit or,can I just use a powered usb hub. Second, how many of these can be ran from a windows machine, third, is there a modified cgminer that will utilize these?

Thanks in advance.

demonmaestro,

I held off sending BTC specifically because of all the craziness these last few days... I am still interested in 1 unit but now I am in a better position to just pay with PayPal.

Please try not to lock the order before giving us a heads up as to when you are about to send payment and get this batch ordered. I would like to pay you when you know you can send the order in.

I will PM you as well.

not to sound bad.. but what is the OP creditability? What prevents him from disappearing with the BTCs?

Sorry to bring this up, but too many hustlers around here

I purchased USB miners from him and received with no issue.

+1

I got 5 usb miners from him,

I have 4 more, plus batch1 and batch2  gridseeds on order

Did batch1 get in yet? And was batch2 ordered?  Can we get an update?

Yes they require a separate PSU. Well windows limit is 100 something usb devices. :o  No it uses a modified version of CPU miner.


Nothing prevents me from running with the cash and BTC however I have no need to do that. Besides a little research over my SN and it won't take long for someone to find out who I really am. I am not trying to hide who I am.  ;)  8)


Not yet. Last I heard they have gotten on hold for a firmware update. (The rumored 500-600KH/s) I will let yaw know as soon as I hear something. So sorry for the delay. :-\

out of curiosity why are the different group buys fluctuating from 160$/unit all the way to $400+/unit?
and can these things hash scrypt-jane?

Can't explain the price differences either. :(

No it can't mine anything but "straight" scrypt should work (i.e. LTC, DOGE, and any others in the LTC-based scrypt family).

Likely will bump my order up to 3.  Just awaiting status update.

Status update as in what kind of update?

Like this?
Batch 1 Units should be to me by the end of next week.
Yes i know "should".. BUT Here is some BETTER news. They are being currently held due to making sure the firmware upgrade is all good. So The rumored 500-600kh/s is true. :o 8) Sorry for the delay.

Just waiting to hear when Batch 2 order will be placed.  I think last update was they were waiting to ship out all of batch 1?

Yep. still waiting.  :'( But Batch2 should be paid i would say by mid march

Batch one is already locked in, paid, and ordered with no additional BTC charges.  Correct?

BATCH 1 has been paid for and just waiting shipment to me.

Now batch 2 that maybe a different story for people that paid via btc.

What is different about these to make them more expensive than the $279 version in other group buys?

all that they got an email from gridseed saying that if they get 200 units they can get the miners... and who knows when they will be shipped.. and some people are just trolling and scamming  :'(

Aka. if it sounds too good to be true it probably is. FaKe.

Can I still get in on batch 2?

yep its still open.

If you paid via PayPal Please Check your PMs . Thanks.

What software do we use once we connect these up to windows.  I got my PSU so that's ready to go.  Do we need the controller?

This is good news  ;D
I cant wait to play with my new toys !!

I believe its just a modified version of cpuminer and they hook up via USB cable to your pc or with a USB hub if you have multiple units

When can we expect to see people from batch 1 reporting that they have received their product? Will you post your shipping label from Gridseed once you get product?

well as soon as i get the shippment in it will be going out. still waiting for the shippment to me. Unforntally there are quite a few people ahead of me waiting as well. As soon as i find out something i will post it on here. I have updated ya on as much as i know and like i said as soon as i find out something i will let ya know.

Come on folks if we hit over 40 units we maybe can get ours sooner.

Maybe?  I Havent seen batch 1 yet, but I'm willing to buy some more if we can speed it up

I know I am waiting for batch 1 my self. I've already paid for batch 1 as well. Just waiting for them to ship. As soon as a I get a tracking number I will update it on here. I know its starting to get out of hand. I guess these things were more popular then expected. :-\

I take it everything is good on the paypal side as a bunch updated in Quicken yesterday??

How is the MT Gox collapse going to effect the group buy?? 

El

Well as long at the price dont drop below $575 I will be able to absorbe the weight.

Mt.Gox What is that.. :o (scaristac responce)
I dont deal with Mt.Gox so I really dont care. The prices that effect this is CoinBase/BitStamp.

As far as in PayPal everything is good on it. I hate to say it but doing PayPal Will be the most secure way.  :-\

Any update on the shipping status of batch 1?

I was wondering the same I have been seeing these pop up all over the place now I thought i was going to be an early adopter? In a few weeks these will be old news with the rath of crazy asic products comming soon lol  ;D

nothing yet  :-\ I am still waiting on mine just like yaw are. They just aint shipping enough from china quick enough.
I am so sorry for the delay.

Its ok I got so itchy for them I ordered a few more from other sources I hopet hey all show up together Ill have like 20 of them to setup between all my orders I just want 1 to show up to ease my addiction to mining cryptos

I hope they show up soon. They just aint shipping out of china quick enough.

Okay guys I am getting tired of waiting for these things to ship to me SO i can ship them to ya. (I am sure ya are too.)

Here is the plan.
-----------------------------------------------------------------------
If I don't get any units in or hear anything about shipping to me with in 2 weeks i will do the following.

Batch 1: has been paid for awhile back. I will request refund from distributor on this.
Batch 2: Will start refunding.

I will send out a Mass PM out when this will happen.
If funds are not retrived with in said date. Those funds will be considered donations.

-----------------------------------------------------------------------

Refund start date if hear nothing on details for shipping is Friday March 7, 2014 (1400 CST - 2:00pm CST)
You will have till Sunday March 9, 2014 (1400 CST - 2:00pm CST)

PS: Could someone quote this for binding standards.

www.zoomhash.com has them in stock in california. Forum users reported receiving these units within 1-3 days.

Just paid ~.462 BTC for 1 unit overnighted. Let's see how quickly it arrives since it is noted Batch 3 shipping Feb 28 from L.A. CA.

Great News can't wait to try these out

So you finally got an update from them on shipping? I have ordered a few direct as well and I have to say the communication is really poor directly from the manufacturer. I am trying to contact them about setting up a US distributor to handle Importing, Support and Shipping to North America.

they already have one... zoomhash has tracking for mine confirmed delivering tomorrow.

Received my Gridseed miner today as promised by zoomhash... ordered Thursday afternoon around 11 AM CST, got shipping confirmation about 6 PM CST and it arrived on my doorstep today at noon EST.

I would include pics and hashing info but sadly they were sold out of power supplies to include with this shipment so I had to buy it off eBay... it arrives Monday.

I also received 2 units from zoomhash but he did not send the USB cable like he promised in his listing on eBay and the web site.  This may cost him on his feedback as when I messaged him he said it was a mistake and I'd just have to buy them elsewhere.  EDIT:  Zoomhash apologized for the mistake and reimbursed me in BTC for the USB cables.

I have the 2 units up and running and have everything ready for the one I will receive from this group buy (hopefully soon).

The units I have are hashing great.  They are the gold fin ones.

I had ordered another batch of 10 which showed up today but without all the accessories so I was able to put together some power cables and USB cables and get 5 up running tonight. Once i get the cables I ordered ill have them all up and i can add the ones i am getting from this group buy to the  extra 10 port hub connected to one of my miners doing GPU Scrypt mining I have both running right now with no issues. Other then a small issue with the first modified CPU miner not disabling the BTC core and drawing way to much power I was able to get them up and mining within 15 min after I had all the right links and software to gether

Just an update.

This is from FedEx : Estimated delivery : Wed 3/05/2014 by 10:30 am

Still promised shipping out friday/saturday: Will be in the mail saturday.

(I think the postman is going to hate me when I come in there with 52 large flat rate boxes. :o)

*This is for BOTH Batches.*

Great news thanks for the update looking forward to getting more :)

Any word on Batch 2 or should we request a refund?

Waiting on FedEx to release the miners. Hopefully tomorrow.
https://mycryptocoin.us/downloads/sale/fedexgridseed.png

---Hosting Update---

I am now offering hosting as well.
BTC0.1 yearly -> Per device. Your pool.

oh, great news then! :)

What a tease Come on FedEx let it go :)

Just an update. I am still waiting on fedex.

Note: If you want to actually see the tracking number and I see that you are part of the group buy I will let you see the tracking number so you can verify for your self that I am not lying. Please pm me.

what's the latest on this?

still waiting on customs to release the package.

I have filled out 3 different forms for them so hopefully they will release it today or tomorrow.

I am truly sorry for the delay.  :'(

while we are waiting, i'm trying to make sure i have the items to get these up soon as they show up.

i have the power supply and usb hub
do these come with the power cables (where to order these? if someone knows)
do these come with usb cables

thanks!

I got told that they will come with both.

Good news. Customs released the packages. I should hopefully get them tomorrow.

Yay, now if the plugs I ordered for my other one shows up.  said it delivered to Anna 2 days ago. then to coppell yesterday, then no update since then, 
now Anna is like 20 miles directly north of me, Coppell is close to 40 miles west of me.

Ugg, the power supply I ordered in the same order showed up today. 

El

I just received them today. Although wouldn't you know it some stuff is missing  :'( I have it coming overnight so I will be able to get out everyones miners Friday.

Damn customs holding packages.

So what was missing the extra parts we need to use them?

Today is Friday, have they been sent out?

Nothing now. Ya got custom power cables made by me. usb cables. and the miners. those that gotten more than 10 miners got a PSU and a controler.

PACKAGES has been sent out.
I will be sending out tracking numbers here soon.

Note: If i can stay awake.  :o

BOTH BATCHES HAS BEEN SHIPPED.  8)

Great News. Thanks

Thanks for your hard work.  I know it can be stressful dealing with a lot of inpatient buyers and frustrating to deal with things outside your control (customs); but appreciate your persistent and diligence in moving this forward :)

When is Batch 4 expected to ship?

it will ship as soon as the batch gets fulfilled

Mine came today with the power cable and the USB cable.

It's up and hashing with the other ones I have and now I have an extra power cable.  I was out of microUSBs so the inclusion of the cables was a very nice touch and much appreciated!

i got my two today, awesome job DM!, wired up some cables off of molex, and hooked it up.  Not sure if these are like the usbs that need to be selected to hash for ltc only?  I'm using the new multiminer and the bfgminer with gridseed support, they appear to be hashing, have 16 and 14 shares accepted on each respectively after a few minutes.

I am using  --set-device gridseed:clock=800.  i had it set for 850 like others i read, but it appeared to be generating errors.  What are others running their's on?  I started it stock and it was like 250-270ish which seemed low, at 800 they are at reporting 340khs, and no errors at the moment.

Do you need to firmware update these, link someone?

I got mine on a Raspberry pi on bfgminer. I am getting some hardware errors but on the pool they are a solid 350kh/s sometimes more. at a clock of 850. and not a lick of heat.

UPDATE: Batch 3 gridseeds and blades coming soon!