|
Title: Tigggger's Reputation Thread Post by: Tigggger on February 28, 2014, 12:42:31 AM Current Rigs Available For Lease
https://leaserig.net/index.jsp?fprovider=Tigggger&t=1&rfid=1439 SHA256 TigAnt1 : 1x Bitmain Antminer @ 190GH TigDra1 : 1x Dragon 1T @ 1,000GH OFFLINE TigDra2 : 1x Dragon 1.5T @ 1,500GH TigDra3 : 1x Dragon 1.5T @ 1,500GH TigDra4 : 1x Dragon 1.5T @ 1,500GH TigDra5 : 1x Dragon 1.5T @ 1,500GH TigJup1 : October KNC Jupiter @ 575GH OFFLINE TigJup2 : November KNC Jupiter @ 850GH OFFLINE TigJup3 : November KNC Jupiter @ 750GH OFFLINE TigNep1 : KNC Neptune @ 3,500GH TigSpo1 : Spondoolies SP10 @ 1,150GH TigSpo2 : Spondoolies SP10 @ 1,350GH TigSpo3 : Spondoolies SP10 @ 1,350GH TigSpo4 : Spondoolies SP10 @ 1,400GH TigSpo5 : Spondoolies SP30 @ 4,450GH TigSpo6 : Spondoolies SP30 @ 4,500GH TigSpo7 : Spondoolies SP10 @ 1,400GH TigSpo8 : Spondoolies SP10 @ 1,400GH TigSpo9 : Spondoolies SP10 @ 1,400GH TigSpo10 : Spondoolies SP30 @ 4,500GH TigSpo11 : Spondoolies SP30 @ 4,500GH TigSpo12 : Spondoolies SP30 @ 4,000GH TigSpo13 : Spondoolies SP30 @ 4,450GH Lease Information All speeds quoted are based on long term bitcoin mining speeds at the pool and are rounded down to allow a little extra. Please note that if you are mining coins with faster block times you may see slightly slower speeds, this is normal as stale and rejected shares increase and will apply to all hardware. It can take up to 5 minutes from the lease starting for the speed to stabilise as the pool adjusts the difficulty levels, if your pool allows it use at least 256 difficulty. Please ensure you set MULTIPLE pools. Because the rigs mine exclusively for you, if your pool goes down and you only have one set then the machine will be idle and there is nothing I can do. This is especially important with new coins as they tend to get hammered and crash frequently. I'd suggest one of the main BTC pools (guild, ghash, slush etc) as the last on your list then at least you will always get something. My rigs are very stable some with uptimes of several months, but nothing is ever perfect, I keep an active eye on any leases and will try to let you know by email if I spot something wrong. In the event of any downtime which is my fault you will receive double what you lost. So if a rig is down for an hour I will add 2 hours or if you prefer you can request a refund. Most rigs are located in my own air conditioned server room here in the UK apart from the Spondoolies machines which are hosted at a professional data center in the USA. All are monitored with CGRemote, if a machine goes offline it sends a message to my phone and plays a siren loud enough to wake me up if asleep :) My aim is to offer good rigs at reasonable prices with excellent service so people keep coming back, rehires get a 2% discount. I am usually around from 09:00 to 23:00 UK time, if you have questions or there are any problems just send me a PM or send me a message in the chat on Leaserigs site Title: Re: Tigggger's Reputation Thread Post by: teamlottowin on March 01, 2014, 05:42:19 AM rented his rigs, works as promised .. smooth sailing
Title: Re: Tigggger's Reputation Thread Post by: Tigggger on March 01, 2014, 09:59:22 AM rented his rigs, works as promised .. smooth sailing Thanks for the feedback, if you rent again drop me a PM and will add some free time on for you. Title: Re: Tigggger's Reputation Thread Post by: iamthesky on March 02, 2014, 05:04:04 AM nevermind working good :)
Title: Re: Tigggger's Reputation Thread Post by: Tigggger on March 03, 2014, 07:02:48 PM I sent emails out to all the current renters of my Antminers, but just in case they don't get it and check in here.
Quote I’m sorry to report that there seems to be some problem between the Antminers and the Leaserig Proxy as it keeps disconnecting at random for no apparent reason, all my other equipment is working OK so it must be specific to the Antminers. I thought I had traced the problem to an issue with pools but that no longer appears to be the case. I will point some of my other equipment at your pools on rotation to try and keep the average up to what you paid for, if it’s still not enough I will of course add extra time or issue a refund. UPDATE: The problem has now been fixed and the Antminers are running smoothly All renters were provided with extra hashpower to bring the average back up what it should be https://i.imgur.com/na4HrUf.jpg https://i.imgur.com/XYbvLlH.jpg https://i.imgur.com/pKDkwcs.jpg Title: Re: Tigggger's Reputation Thread Post by: djeZo on March 06, 2014, 08:28:49 PM What exactly was the issue with antminers?
Title: Re: Tigggger's Reputation Thread Post by: Tigggger on March 06, 2014, 08:37:11 PM What exactly was the issue with antminers? Not sure what the cause was, but I reflashed the firmware on them all and they were fine after that Title: Re: Tigggger's Reputation Thread Post by: Sithra on March 15, 2014, 12:49:47 AM EXCELLENT Provider.
Responsive, Great Communication & Hashrates in excess of that advertised Generously compensated for an outage that was pool related - nothing to do with his excellent rigs Would definitely hire any of Tigggger's rigs again & recommend to all. A+++ Title: Re: Tigggger's Reputation Thread Post by: samm1129 on May 02, 2014, 09:18:23 AM Juste rented two rigs and both are taken offline:
Name Current Speed Remaining lease time Provider TigAnt1 (SHA256 900.00 GH/s) Using LRP Only Stratum pools supported OFF 23 hours and 44 minutes Tigggger TigAnt2 (SHA256 900.00 GH/s) OFF 23 hours and 44 minutes Tigggger Click a mining rig to manage pools and view stats. Title: Re: Tigggger's Reputation Thread Post by: Tigggger on May 02, 2014, 09:38:49 AM Juste rented two rigs and both are taken offline: Name Current Speed Remaining lease time Provider TigAnt1 (SHA256 900.00 GH/s) Using LRP Only Stratum pools supported OFF 23 hours and 44 minutes Tigggger TigAnt2 (SHA256 900.00 GH/s) OFF 23 hours and 44 minutes Tigggger Click a mining rig to manage pools and view stats. Investigating now, will report back shortly Title: Re: Tigggger's Reputation Thread Post by: Tigggger on May 02, 2014, 10:09:00 AM Juste rented two rigs and both are taken offline: Name Current Speed Remaining lease time Provider TigAnt1 (SHA256 900.00 GH/s) Using LRP Only Stratum pools supported OFF 23 hours and 44 minutes Tigggger TigAnt2 (SHA256 900.00 GH/s) OFF 23 hours and 44 minutes Tigggger Click a mining rig to manage pools and view stats. Investigating now, will report back shortly The issue appears to be with the pool you are using (Slush ?) both rigs were constantly connecting and disconnecting from the pool. As you can see from the stats the rigs were running stable at 950GH average before the rental started, and the other two farms TigAnt3 and TigAnt4 are still running fine. TigAnt2 has improved a little, TigAnt1 was still playing up so I restarted the proxy server and that too seems to have improved, but they are both suffering from disconnects. As you can see the machines are hashing OK, I'd recommend adding a 2nd back up pool. https://i.imgur.com/nSjy2rP.jpg EDIT: Both rigs appear stable now, the disconnects have stopped Title: Re: Tigggger's Reputation Thread Post by: BlackHood on May 02, 2014, 11:54:03 PM Currently leasing "TigAnt4" for 4 hours. Very stable rig right off the get go.
Nice hashrate! Great lease! Worth it for sure! Recommended Provider! A+++ Title: Re: Tigggger's Reputation Thread Post by: bronan on May 06, 2014, 04:21:11 AM When i woke up this morning the rig has been not on my pools but on your pools instead :(
All my pools where removed and now shows 0 hash speed Title: Re: Tigggger's Reputation Thread Post by: Tigggger on May 07, 2014, 03:05:20 PM When i woke up this morning the rig has been not on my pools but on your pools instead :( All my pools where removed and now shows 0 hash speed This was resolved via PM at the time but posting to keep things public. It appeared to be an issue with leaserigs itself as several other users reported problems in their thread around the same time. I added on additional time for bronan even though I don't believe it was a problem at my end, hopefully he will post confirming that he was satisfied. Title: Re: Tigggger's Reputation Thread Post by: jedimstr on June 07, 2014, 05:02:50 AM Seems Bronan isn't the only one with this problem...
I just lost at least an hour with my primary pool and 1st backup removed from the list. I deleted the other pools that showed up and put my pools back in. WTF??? Do I have to babysit this rig every few hours to make sure it stays on my pools? I'm only 22 hours into a 24 hour rental and I already lost over one. Ugh. I'm getting paranoid now about this rental. Title: Re: Tigggger's Reputation Thread Post by: Tigggger on June 07, 2014, 07:36:17 AM Seems Bronan isn't the only one with this problem... I just lost at least an hour with my primary pool and 1st backup removed from the list. I deleted the other pools that showed up and put my pools back in. WTF??? Do I have to babysit this rig every few hours to make sure it stays on my pools? I'm only 22 hours into a 24 hour rental and I already lost over one. Ugh. I'm getting paranoid now about this rental. Sorry you have had problems, not had this issue for a while and last time it coincided with some maintenance at leaserigs. Can you tell me what pools were added it might help me/leaserigs figure out what is happening, I was asleep and nothing has been changed at my end. All my machines point to the leaserig proxy on a local machine at 192.168.1.200:3333, that is the only pool set in the machine. The proxy gets the pool details from leaserigs and writes them to a pools.conf file on that machine, so the only way for the pools to change as far as I can see is for the leaserigs server to tell it to and write a new config file. Everything seems to be running fine at the moment from what I can see, but will keep an eye on it. I will ensure that you get what you paid for. EDIT: Here is a screenshot from ghash.io that shows them stop mining on my pool when the lease started, and they haven't been active since https://i.imgur.com/BqBqJf9.jpg Title: Re: Tigggger's Reputation Thread Post by: jedimstr on June 07, 2014, 11:37:48 AM Seems Bronan isn't the only one with this problem... I just lost at least an hour with my primary pool and 1st backup removed from the list. I deleted the other pools that showed up and put my pools back in. WTF??? Do I have to babysit this rig every few hours to make sure it stays on my pools? I'm only 22 hours into a 24 hour rental and I already lost over one. Ugh. I'm getting paranoid now about this rental. Sorry you have had problems, not had this issue for a while and last time it coincided with some maintenance at leaserigs. Can you tell me what pools were added it might help me/leaserigs figure out what is happening, I was asleep and nothing has been changed at my end. All my machines point to the leaserig proxy on a local machine at 192.168.1.200:3333, that is the only pool set in the machine. The proxy gets the pool details from leaserigs and writes them to a pools.conf file on that machine, so the only way for the pools to change as far as I can see is for the leaserigs server to tell it to and write a new config file. Everything seems to be running fine at the moment from what I can see, but will keep an eye on it. I will ensure that you get what you paid for. EDIT: Here is a screenshot from ghash.io that shows them stop mining on my pool when the lease started, and they haven't been active since https://i.imgur.com/BqBqJf9.jpg It was some 5.44.dontrememberother numbers IP address and another pool. I was so pissed I deleted them quickly and put mine back up. If it happens again, I'll get a screenshot. Title: Re: Tigggger's Reputation Thread Post by: Tigggger on June 07, 2014, 11:56:30 AM It was some 5.44.dontrememberother numbers IP address and another pool. I was so pissed I deleted them quickly and put mine back up. If it happens again, I'll get a screenshot. Thanks, a screenshot would be very useful. Like I said I have no other pools set in the machines, so the only source of pools to mine at is what leaserigs tells it. I have on a couple of occasions seen my rigs continue to mine on a renters pool after a lease has finished so I wonder if this is similar and it was using the previous renters pools. I have just added an hour to the lease as a gesture of goodwill, I will talk with the leasrigs devs and see if they can figure out what happened. Title: Re: Tigggger's Reputation Thread Post by: jedimstr on June 07, 2014, 01:53:01 PM Thanks. This isn't the first time I've seen this behavior either on LeaseRigs. Other rentals I've had with other rigs/owners have had random removals of my pools or different pools added, so definitely agree something is up with LeaseRig's operation. It's not a config caching issue because it doesn't always happen near the start of a rental. I've seen it happen after some time has passed too. Something definitely is up on their end. They must be aware of it though since it's one of the disclaimers they have on rentals, so not an isolated case, but they put the blame on the owners side:
Quote Remove unwanted pool(s). You can safely remove any pool you want. It is recommended to remove all unknown pools and pools marked with Remove me. You cannot remove currently active pool (pool marked green), you need to switch first to another pool, then try to perform removal operation. Use backup pools! Pools are usually unreliable. With backup pools you make sure your hired hashing power is not wasted for nothing in case of pool failures. You can use up to 8 pools. If you notice your pools being removed and switched to other pools you did not want, please contact mining rig provider. You have every right to request lease extension or a refund in such cases. If the mining rig is not responding or if you get errors when trying to add, remove or switch pools, contact mining rig provider! We cannot assist you with mining rig errors, because we have no control over rigs. If you could not resolve the issue with the provider or he does not respond to you within 48 hours, let us know so we can take actions against the provider. I actually prefer the way BetaRigs handles their rentals... Seems more secure in pool handling. It only allows pools the renter themselves enter and displays non-renter pool time as downtime. It's only missing the higher hashrate rigs and backup pool capability of LeaseRigs, otherwise it's a better website and experience. You should check BetaRigs out. Oh and thanks for the compensation time!!! Title: Re: Tigggger's Reputation Thread Post by: Tigggger on June 07, 2014, 02:15:00 PM I have used betarigs in the past, in fact I was the first one with SHA256 rigs on there as I was beta testing for mux, there are pro's and con's to both sites though I have to agree that the way rigs are provided (no proxy server required) is better on Betarigs.
It's sadly missing some important things for me, like different rental rates and discounts. I tend to want repeat custom and long term rentals and price lower for those whereas on betarigs I can only have one price. I hope the rest of the lease continues without issues, if there are any problems let me know. Title: Re: Tigggger's Reputation Thread Post by: miaviator on June 07, 2014, 11:28:25 PM New accounts with under 8 rentals often pop-up on the forum and make statements like: Abandoning, Issues, Bugs, etc. etc. They then go on to talk about or Rave about a competing service. This happens in every industry even when research showed that coca-cola was the number one editor of the Pepsi Wikipedia page.
Thank you jedimstr for keeping propaganda alive! This was an enjoyable read. I really enjoyed the copy and paste from the Legacy Faq which is no longer in use. LR support has assisted hundreds of renters and providers with mining software issues, pool issues, set issues, and more. In those rare cases when a bug is found LR has refunded the affected parties and corrected the issue generally within 24 hours. Thanks. This isn't the first time I've seen this behavior either on LeaseRigs. Other rentals I've had with other rigs/owners have had random removals of my pools or different pools added, so definitely agree something is up with LeaseRig's operation. It's not a config caching issue because it doesn't always happen near the start of a rental. I've seen it happen after some time has passed too. Something definitely is up on their end. They must be aware of it though since it's one of the disclaimers they have on rentals, so not an isolated case, but they put the blame on the owners side: Quote Remove unwanted pool(s). You can safely remove any pool you want. It is recommended to remove all unknown pools and pools marked with Remove me. You cannot remove currently active pool (pool marked green), you need to switch first to another pool, then try to perform removal operation. Use backup pools! Pools are usually unreliable. With backup pools you make sure your hired hashing power is not wasted for nothing in case of pool failures. You can use up to 8 pools. If you notice your pools being removed and switched to other pools you did not want, please contact mining rig provider. You have every right to request lease extension or a refund in such cases. If the mining rig is not responding or if you get errors when trying to add, remove or switch pools, contact mining rig provider! We cannot assist you with mining rig errors, because we have no control over rigs. If you could not resolve the issue with the provider or he does not respond to you within 48 hours, let us know so we can take actions against the provider. I actually prefer the way BetaRigs handles their rentals... Seems more secure in pool handling. It only allows pools the renter themselves enter and displays non-renter pool time as downtime. It's only missing the higher hashrate rigs and backup pool capability of LeaseRigs, otherwise it's a better website and experience. You should check BetaRigs out. Oh and thanks for the compensation time!!! Title: Re: Tigggger's Reputation Thread Post by: jedimstr on June 08, 2014, 05:47:04 AM New accounts with under 8 rentals often pop-up on the forum and make statements like: Abandoning, Issues, Bugs, etc. etc. They then go on to talk about or Rave about a competing service. This happens in every industry even when research showed that coca-cola was the number one editor of the Pepsi Wikipedia page. Thank you jedimstr for keeping propaganda alive! This was an enjoyable read. I really enjoyed the copy and paste from the Legacy Faq which is no longer in use. LR support has assisted hundreds of renters and providers with mining software issues, pool issues, set issues, and more. In those rare cases when a bug is found LR has refunded the affected parties and corrected the issue generally within 24 hours. Thanks. This isn't the first time I've seen this behavior either on LeaseRigs. Other rentals I've had with other rigs/owners have had random removals of my pools or different pools added, so definitely agree something is up with LeaseRig's operation. It's not a config caching issue because it doesn't always happen near the start of a rental. I've seen it happen after some time has passed too. Something definitely is up on their end. They must be aware of it though since it's one of the disclaimers they have on rentals, so not an isolated case, but they put the blame on the owners side: Quote Remove unwanted pool(s). You can safely remove any pool you want. It is recommended to remove all unknown pools and pools marked with Remove me. You cannot remove currently active pool (pool marked green), you need to switch first to another pool, then try to perform removal operation. Use backup pools! Pools are usually unreliable. With backup pools you make sure your hired hashing power is not wasted for nothing in case of pool failures. You can use up to 8 pools. If you notice your pools being removed and switched to other pools you did not want, please contact mining rig provider. You have every right to request lease extension or a refund in such cases. If the mining rig is not responding or if you get errors when trying to add, remove or switch pools, contact mining rig provider! We cannot assist you with mining rig errors, because we have no control over rigs. If you could not resolve the issue with the provider or he does not respond to you within 48 hours, let us know so we can take actions against the provider. I actually prefer the way BetaRigs handles their rentals... Seems more secure in pool handling. It only allows pools the renter themselves enter and displays non-renter pool time as downtime. It's only missing the higher hashrate rigs and backup pool capability of LeaseRigs, otherwise it's a better website and experience. You should check BetaRigs out. Oh and thanks for the compensation time!!! I copied and pasted exactly from the mining status page from the bottom of Tigggger's rig at the time of the post. If it's a "Legacy FAQ" then it's LeaseRig's fault that they didn't remove it from an active Mining Status page. Besides, my original post here was linked from those terms on the bottom of that Mining Status page so that I could report any issues I found. I had an issue and I reported. So I call bullshit on your "Legacy FAQ" story. UPDATE: Here's a screenshot of another rental I just purchased... note that the "Legacy FAQ" is very much still in use on the Mining Rig Status page. Note the part I highlighted... it has a link directly to reputation threads here on BitcoinTalk for reporting the specific issue of pool removals/changes. https://i.imgur.com/VH83TGj.png #2 - if you are associated or work for LeaseRigs you can lookup my account and rental history. I am not a "new" renter and have payed quite a bit of money.... And I continue to use LeaseRigs. Just because I report an actual issue I had AS Stated in the instructions on LeaseRigs site (using the link provided on the LR site on the mining rig status page) and have real customer feedback on what I like and dislike about both LR and BR, doesn't give You the right to say it's propaganda. If you re-read my posting, I was pretty fair in listing both the good qualities and bad qualities of both rental services. In fact I wish both services had some of the features of each other... HOW IS THAT PROPAGANDA??? In no way do statements like that even come close to propaganda. I'd agree with you if I was just extolling the virtues of BR, but I wasn't. I listed what features I liked about both services. So... are you one of the guys behind LeaseRigs? Because if berating a continuing renter and actual paying customer is your idea of customer support, then good luck with the rest of your business. I had some rigs I was going to submit to lease, but if this is the way LeaseRigs treat customer comments (in public, and not in private), then I'm definitely not putting my rigs on LR. Funny thing is, this isn't even YOUR THREAD!!! This is Tigggger's Reputation Thead. And he's been fair, understanding, and great. That's customer service... not the crap you just posted. Tigggger- Sorry for muddying your post with this tangential exchange. You've been more than fair with me and we shouldn't be filling your reputation thread with this type of harassment by some other parties. Title: Re: Tigggger's Reputation Thread Post by: PublicP2poolNode on June 25, 2014, 12:51:01 AM I would love to lease all of your rigs right now if they weren't on LRP
LRP is not compatible with p2pool :( Title: Re: Tigggger's Reputation Thread Post by: Tigggger on June 25, 2014, 08:08:15 AM I would love to lease all of your rigs right now if they weren't on LRP LRP is not compatible with p2pool :( Leasrigs are currently testing a new system which will get rid of the LRP and allow the use of P2Pool and even solo mining. The only reason I use LRP is that I have lots of machines and people seem to prefer larger rigs so it's currently the only simple way to combine them. Title: Re: Tigggger's Reputation Thread Post by: felineplunk on September 17, 2014, 08:24:24 AM I'm new around here so take this how you like. I just leased Tigggger's rig for 4 hours and will update some time after it completes.
Title: dud, please keep the info up to date. Post by: lottery248 on January 07, 2015, 06:48:38 AM in order to know that which machine is currently offline or online, or the actual rated hash rate, please update the info while you are in spare. i am renting your [GB flag] tigspo1, it seems the rated hash rate is different to the board shown.
the rated hash rate is now 11500 Ghs, not 1150 Ghs. have a nice day on renting the machine! :D Title: Re: Tigggger's Reputation Thread Post by: Tigggger on January 07, 2015, 07:41:30 AM Thanks for the rental, as far as I can see everything is set correctly.
https://i.imgur.com/pTnGW4E.png https://i.imgur.com/v3AG3Jh.png |
