Title: Anyone fought this issue before? Post by: ANSEL_2.0 on April 20, 2022, 10:35:28 AM What type of sign is when you OC your graphic card for mining and it works at the same spot for months then later it started crashing? Unless I reduce the OC settings before it starts working fine again? Is the memory dying or the thermal pads are weak? This graphics card is a vega 56.
Title: Re: Anyone fought this issue before? Post by: Alexstabilini on April 20, 2022, 10:56:22 AM Hi!
I have a vega 56 sapphire nitro+ samsung that in the heat always sends the rig down.. with the cool it was ok. it has to be said that it went constant at 54mhs .. 52mhs now it doesn't give any more problems :-) Alex Title: Re: Anyone fought this issue before? Post by: philipma1957 on April 20, 2022, 11:12:28 AM the caps in the cards age. and all pads and thermal pastes get older.
Just lower clocks unless you feel like tearing the card down rep adding and pasting. Try adding a fan. here is a good one. https://www.amazon.com/gp/product/B0828TW8ZW/ref=ppx_yo_dt_b_search_asin_title? I also have this one. https://www.amazon.com/gp/product/B07CFH35DB/ref=ppx_yo_dt_b_search_asin_title? Title: Re: Anyone fought this issue before? Post by: arielbit on April 20, 2022, 01:35:35 PM how about heat?
what if it is fine during winter and spring..then it starts getting errors during summer. so you don't over clock during hot months and you overclock during cool months. Title: Re: Anyone fought this issue before? Post by: Outhue on April 20, 2022, 06:48:07 PM That's a temp issue, the graphic card will crash because it can't handle that overclock settings its on, change the thermal pad and thermal paste or add an extra cooling fan, this season is very hot 🔥, even my 3060ti is misbehaving, temp is up to 61°C while its always at 56°C before, crazy time.
Title: Re: Anyone fought this issue before? Post by: ANSEL_2.0 on April 21, 2022, 09:09:02 AM Hi! Mine is hynix memory and im using Teamred miner, now I can only use the following settings on this RX Vega 56 for stable performance at 43MHI have a vega 56 sapphire nitro+ samsung that in the heat always sends the rig down.. with the cool it was ok. it has to be said that it went constant at 54mhs .. 52mhs now it doesn't give any more problems :-) Alex Core clock 950 VDD 825 VDDCI 930 MVDD 1275 Mem Clock 860 Tweak config amdmemtweak --CL 18 --RC 34 --RP 13 --WR 11 --CWL 7 --FAW 12 --RAS 23 --REF 15600 --RFC 164 --RTP 6 --RRDL 4 --RRDS 3 --WTRL 4 --WTRS 4 --RCDRD 19 --RCDWR 11 Anything more than 860 on memory this card will crash Title: Re: Anyone fought this issue before? Post by: ANSEL_2.0 on April 21, 2022, 09:11:56 AM the caps in the cards age. and all pads and thermal pastes get older. I heard that applying a thermal pad on vega 56 to get lower temp can be a pain in the ass and im trying to avoid that lol, thanks for the cooling fan links you dropped I will look into them and try getting one maybe it will get better, I wish there is a way to add copper plates to Vega cards too but can't find videos on that.Just lower clocks unless you feel like tearing the card down rep adding and pasting. Try adding a fan. here is a good one. https://www.amazon.com/gp/product/B0828TW8ZW/ref=ppx_yo_dt_b_search_asin_title? I also have this one. https://www.amazon.com/gp/product/B07CFH35DB/ref=ppx_yo_dt_b_search_asin_title? Title: Re: Anyone fought this issue before? Post by: Alexstabilini on April 21, 2022, 09:30:15 AM Hi! Mine is hynix memory and im using Teamred miner, now I can only use the following settings on this RX Vega 56 for stable performance at 43MHI have a vega 56 sapphire nitro+ samsung that in the heat always sends the rig down.. with the cool it was ok. it has to be said that it went constant at 54mhs .. 52mhs now it doesn't give any more problems :-) Alex Core clock 950 VDD 825 VDDCI 930 MVDD 1275 Mem Clock 860 Tweak config amdmemtweak --CL 18 --RC 34 --RP 13 --WR 11 --CWL 7 --FAW 12 --RAS 23 --REF 15600 --RFC 164 --RTP 6 --RRDL 4 --RRDS 3 --WTRL 4 --WTRS 4 --RCDRD 19 --RCDWR 11 Anything more than 860 on memory this card will crash try push core clock to 1100 and check this config --CL 20 --RC 35 --RP 11 --WR 14 --CWL 8 --FAW 12 --RAS 20 --REF 65535 --RFC 248 --RTP 5 --RRDL 6 --RRDS 3 --WTRL 9 --WTRS 4 --RCDRD 12 --RCDWR 12 Alex Title: Re: Anyone fought this issue before? Post by: YellowSwap on April 21, 2022, 11:03:10 AM Hi! Mine is hynix memory and im using Teamred miner, now I can only use the following settings on this RX Vega 56 for stable performance at 43MHI have a vega 56 sapphire nitro+ samsung that in the heat always sends the rig down.. with the cool it was ok. it has to be said that it went constant at 54mhs .. 52mhs now it doesn't give any more problems :-) Alex Core clock 950 VDD 825 VDDCI 930 MVDD 1275 Mem Clock 860 Tweak config amdmemtweak --CL 18 --RC 34 --RP 13 --WR 11 --CWL 7 --FAW 12 --RAS 23 --REF 15600 --RFC 164 --RTP 6 --RRDL 4 --RRDS 3 --WTRL 4 --WTRS 4 --RCDRD 19 --RCDWR 11 Anything more than 860 on memory this card will crash try push core clock to 1100 and check this config --CL 20 --RC 35 --RP 11 --WR 14 --CWL 8 --FAW 12 --RAS 20 --REF 65535 --RFC 248 --RTP 5 --RRDL 6 --RRDS 3 --WTRL 9 --WTRS 4 --RCDRD 12 --RCDWR 12 Alex Title: Re: Anyone fought this issue before? Post by: Alexstabilini on April 21, 2022, 11:31:49 AM Hi! Mine is hynix memory and im using Teamred miner, now I can only use the following settings on this RX Vega 56 for stable performance at 43MHI have a vega 56 sapphire nitro+ samsung that in the heat always sends the rig down.. with the cool it was ok. it has to be said that it went constant at 54mhs .. 52mhs now it doesn't give any more problems :-) Alex Core clock 950 VDD 825 VDDCI 930 MVDD 1275 Mem Clock 860 Tweak config amdmemtweak --CL 18 --RC 34 --RP 13 --WR 11 --CWL 7 --FAW 12 --RAS 23 --REF 15600 --RFC 164 --RTP 6 --RRDL 4 --RRDS 3 --WTRL 4 --WTRS 4 --RCDRD 19 --RCDWR 11 Anything more than 860 on memory this card will crash try push core clock to 1100 and check this config --CL 20 --RC 35 --RP 11 --WR 14 --CWL 8 --FAW 12 --RAS 20 --REF 65535 --RFC 248 --RTP 5 --RRDL 6 --RRDS 3 --WTRL 9 --WTRS 4 --RCDRD 12 --RCDWR 12 Alex maybe card was unstable because of the low core or low VDD.. Mine go from 1050 to 1150.. and crash with VDD under 853.. Title: Re: Anyone fought this issue before? Post by: Pterosaur on April 24, 2022, 07:50:35 AM Hi! Mine is hynix memory and im using Teamred miner, now I can only use the following settings on this RX Vega 56 for stable performance at 43MHI have a vega 56 sapphire nitro+ samsung that in the heat always sends the rig down.. with the cool it was ok. it has to be said that it went constant at 54mhs .. 52mhs now it doesn't give any more problems :-) Alex Core clock 950 VDD 825 VDDCI 930 MVDD 1275 Mem Clock 860 Tweak config amdmemtweak --CL 18 --RC 34 --RP 13 --WR 11 --CWL 7 --FAW 12 --RAS 23 --REF 15600 --RFC 164 --RTP 6 --RRDL 4 --RRDS 3 --WTRL 4 --WTRS 4 --RCDRD 19 --RCDWR 11 Anything more than 860 on memory this card will crash try push core clock to 1100 and check this config --CL 20 --RC 35 --RP 11 --WR 14 --CWL 8 --FAW 12 --RAS 20 --REF 65535 --RFC 248 --RTP 5 --RRDL 6 --RRDS 3 --WTRL 9 --WTRS 4 --RCDRD 12 --RCDWR 12 Alex maybe card was unstable because of the low core or low VDD.. Mine go from 1050 to 1150.. and crash with VDD under 853.. Title: Re: Anyone fought this issue before? Post by: P00P135 on April 24, 2022, 04:40:25 PM the caps in the cards age. and all pads and thermal pastes get older. I heard that applying a thermal pad on vega 56 to get lower temp can be a pain in the ass and im trying to avoid that lol, thanks for the cooling fan links you dropped I will look into them and try getting one maybe it will get better, I wish there is a way to add copper plates to Vega cards too but can't find videos on that.Just lower clocks unless you feel like tearing the card down rep adding and pasting. Try adding a fan. here is a good one. https://www.amazon.com/gp/product/B0828TW8ZW/ref=ppx_yo_dt_b_search_asin_title? I also have this one. https://www.amazon.com/gp/product/B07CFH35DB/ref=ppx_yo_dt_b_search_asin_title? The thermal pads on VEGA 56/64 don't really need to be changed since the GPU's have HBM2 memory which is located on the GPU die. You just have to reapply a nice thick thermal paste so that the HBM2 memory is making contact with the cooler. Title: Re: Anyone fought this issue before? Post by: DevFile90 on April 24, 2022, 06:34:32 PM the caps in the cards age. and all pads and thermal pastes get older. I heard that applying a thermal pad on vega 56 to get lower temp can be a pain in the ass and im trying to avoid that lol, thanks for the cooling fan links you dropped I will look into them and try getting one maybe it will get better, I wish there is a way to add copper plates to Vega cards too but can't find videos on that.Just lower clocks unless you feel like tearing the card down rep adding and pasting. Try adding a fan. here is a good one. https://www.amazon.com/gp/product/B0828TW8ZW/ref=ppx_yo_dt_b_search_asin_title? I also have this one. https://www.amazon.com/gp/product/B07CFH35DB/ref=ppx_yo_dt_b_search_asin_title? The thermal pads on VEGA 56/64 don't really need to be changed since the GPU's have HBM2 memory which is located on the GPU die. You just have to reapply a nice thick thermal paste so that the HBM2 memory is making contact with the cooler. |