|
Title: Heating pool with S21 Pro (air) Post by: misher on September 06, 2024, 03:22:29 PM Note this is a pretty ghetto setup as I was tired of waiting for the hydro kit for the S21 Pro to come out so I decided to try with air based on an old experiment I saw by someone else where they did similar to heat a bathtub using a S9. Lots of heat will be lost thanks to the ducting but hopefully at least 20% is going into the pool. Cost is $40 canadian for the ducting plus probably $10 I used in duct tape and 3d print filament. Sorry I can't figure out how to get pics to show up on the forum.
https://imgur.com/a/4B86nAO Currently pool is at 24 celsius so will see how things look later. Title: Re: Heating pool with S21 Pro (air) Post by: FP91G on September 06, 2024, 07:33:53 PM Note this is a pretty ghetto setup as I was tired of waiting for the hydro kit for the S21 Pro to come out so I decided to try with air based on an old experiment I saw by someone else where they did similar to heat a bathtub using a S9. Lots of heat will be lost thanks to the ducting but hopefully at least 20% is going into the pool. Cost is $40 canadian for the ducting plus probably $10 I used in duct tape and 3d print filament. Sorry I can't figure out how to get pics to show up on the forum. I help youhttps://imgur.com/a/4B86nAO Currently pool is at 24 celsius so will see how things look later. https://talkimg.com/images/2024/09/06/BUDta.jpeg https://talkimg.com/images/2024/09/06/BUOLo.jpeg |
