|
Title: Antminer S1 Efficiency Question Post by: Reckman on May 31, 2014, 02:17:22 PM Quick question and I will lock / close this, didn't see it anywhere
What is the highest GH/Watt that the S1 can do? Total GH and Power Consumption? Title: Re: Antminer S1 Efficiency Question Post by: ravin on May 31, 2014, 02:28:55 PM From the mining rig showoff thread
Unit is overclocked to 393.75 and with the cheapie power supplies, draws just a little over 470W when hot. Draws 460W when cool. Title: Re: Antminer S1 Efficiency Question Post by: dogie on May 31, 2014, 05:38:43 PM That's not what he asked. Usual terminology is W/GH, which is up to 1.2 or so if you downclock them loads.
Title: Re: Antminer S1 Efficiency Question Post by: ravin on May 31, 2014, 07:26:02 PM That's not what he asked. Usual terminology is W/GH, which is up to 1.2 or so if you downclock them loads. Alrighty. I thought 393.95/470 = 0.84GH/W is what he was looking for. Title: Re: Antminer S1 Efficiency Question Post by: grn on May 31, 2014, 07:36:31 PM 1w/gh is possible
Title: Re: Antminer S1 Efficiency Question Post by: kabopar on May 31, 2014, 09:25:32 PM That's not what he asked. Usual terminology is W/GH, which is up to 1.2 or so if you downclock them loads. Alrighty. I thought 393.95/470 = 0.84GH/W is what he was looking for. The '393.95' in your reply is probably the clock speed in MHz, this is not the hash rate (which is about 200 GH/s for that clock speed). So the efficiency is 470/200 W/(GH/s) which is 2.35 W/(GH/s), a rather poor value. |