Bitcoin Forum

Fresh off the printer!

3D Printed BlackArrow Breakout Board Cases/Mounts for the BlackArrow Software ATX to DC Breakout boards
Found here http://www.blackarrowsoftware.com/store/atx-to-dc-power-adapter.html
and here http://minersource.net/collections/frontpage/products/atx-to-dc-power-adapter
also offered in a deal with 6+ R-Box orders here https://bitcointalk.org/index.php?topic=612390.0
These breakout boards are great for powering the latest Rockminer R-Box units as other mining hardware as well.

Feaures:
Protection from shorts/grounding
Multiple mounting positions
Many Colors available
No hardware required for installing your BlackArrow Software breakout board, it snaps securely in place.


$9 each plus shipping
or 2 for $16 plus shipping
or 3 for $23 plus shipping

BTC, LTC, DRK, Dogecoin, PayPal, MoneyPak payments accepted.
ALL trades considered.

BTC Payment Address
1NcoVoBrtnQTdyZvxYKXbCrL6MkKtgk842

LTC Payment Address
LQo9Ue64uDPUA7X8Hf47Lcxv6uuMy3hjqz

DRK Payment Address
Xan1hYGmXt93fX3VqrhE981mzEs5Wm2xQD

Dogecoin Payment Address
DCEnZBdDY21b7Cn45rEuxKGEi1Sw1gNspy

Please PM me for custom orders and when sending payment etc.

These should fit in a small padded envelope, more on that soon.


***NOTE***DO NOT PLUG MORE THAN ONE (1) PSU INTO THESE BREAKOUT BOARDS.
                    Bad things happen! (to the secondary psu)

EDIT--NOW READY FOR PRODUCTION!

Preview of the cover (just finished modeling)

http://i1141.photobucket.com/albums/n596/MZStrongbow/Mining/BlackArrowbbmountss2_zps77aaba13.jpg (http://s1141.photobucket.com/user/MZStrongbow/media/Mining/BlackArrowbbmountss2_zps77aaba13.jpg.html)

I have yet to clean up my cables but here are the first pics.

http://i1141.photobucket.com/albums/n596/MZStrongbow/Mining/CAM02419_zps031b4d76.jpg (http://s1141.photobucket.com/user/MZStrongbow/media/Mining/CAM02419_zps031b4d76.jpg.html)

http://i1141.photobucket.com/albums/n596/MZStrongbow/Mining/CAM02418_zps8f365d68.jpg (http://s1141.photobucket.com/user/MZStrongbow/media/Mining/CAM02418_zps8f365d68.jpg.html)

http://i1141.photobucket.com/albums/n596/MZStrongbow/Mining/CAM02423_zps81658332.jpg (http://s1141.photobucket.com/user/MZStrongbow/media/Mining/CAM02423_zps81658332.jpg.html)

http://i1141.photobucket.com/albums/n596/MZStrongbow/Mining/CAM02422_zpsa6d9a9da.jpg (http://s1141.photobucket.com/user/MZStrongbow/media/Mining/CAM02422_zpsa6d9a9da.jpg.html)

http://i1141.photobucket.com/albums/n596/MZStrongbow/Mining/CAM02421_zps355eec6b.jpg (http://s1141.photobucket.com/user/MZStrongbow/media/Mining/CAM02421_zps355eec6b.jpg.html)

very nice work - could we see a picture of the entire rig?

Sure thing mate...

http://i1141.photobucket.com/albums/n596/MZStrongbow/Mining/CAM02431_zpsc39e66e3.jpg (http://s1141.photobucket.com/user/MZStrongbow/media/Mining/CAM02431_zpsc39e66e3.jpg.html)

http://i1141.photobucket.com/albums/n596/MZStrongbow/Mining/CAM02428_zps5984df99.jpg (http://s1141.photobucket.com/user/MZStrongbow/media/Mining/CAM02428_zps5984df99.jpg.html)

Looks good! I was gonna make something similar using quarter inch acrylic. But this is way nicer! Nice job
Danny

Very nice, what model 3d printer do you own?

Thanks bro! I should have that trust feedback posted for ya later today...just now catching up!


I operate a Wanhoa Duplicator 4 printer and I am building a secondary (production) printer of the Hadron Ord Bot style and it will also have dual print heads. With profits from my mining operation, I am saving up for a powder-fed SLS (selective laser sintering) style printer but those run in the $10k range for a used model.

That is a kick ass setup of 3D printers.  So cool.

So what colors do you print in?

JUst got home from my appt. at the VA. I started the lid print just now and should have install pics soon.

Currently I have White, Blue, Yellow, Silver and Orange ABS filament and am placing an order for more Black and either Green or Red.
I also have some Glow in Dark Blue on back-order plus I carry a few other material types (nylon, ceramic, PVA etc) for testing and odd jobs.

Are the prices for the units including the lid?
I am going to get one when you are ready.

Yes, both lid and base/mount included in the above listed prices.

Very nice!

Fresh pics of the cover/lid installed! A couple minor changes to the lid and it will be ready.

Also, I am updating the mount/base for faster printing, more versatile mounting options and a more compact unit. Stay tuned for a sneak peak of the new model

More pics soon!

http://i1141.photobucket.com/albums/n596/MZStrongbow/Mining/CAM02468_zpsc9458f74.jpg (http://s1141.photobucket.com/user/MZStrongbow/media/Mining/CAM02468_zpsc9458f74.jpg.html)

http://i1141.photobucket.com/albums/n596/MZStrongbow/Mining/CAM02467_zps552dcfb3.jpg (http://s1141.photobucket.com/user/MZStrongbow/media/Mining/CAM02467_zps552dcfb3.jpg.html)

http://i1141.photobucket.com/albums/n596/MZStrongbow/Mining/CAM02466_zps073e373a.jpg (http://s1141.photobucket.com/user/MZStrongbow/media/Mining/CAM02466_zps073e373a.jpg.html)

http://i1141.photobucket.com/albums/n596/MZStrongbow/Mining/CAM02464_zps85d7a7aa.jpg (http://s1141.photobucket.com/user/MZStrongbow/media/Mining/CAM02464_zps85d7a7aa.jpg.html)


*EDIT---REVISED POST WITH NEW PICS

Here are pics of the colors I have currently. Black is on order and should be here within a couple days.
I normally stock red filament but just ran out last week.

http://i1141.photobucket.com/albums/n596/MZStrongbow/Mining/CAM02469_zps6065a645.jpg (http://s1141.photobucket.com/user/MZStrongbow/media/Mining/CAM02469_zps6065a645.jpg.html)
http://i1141.photobucket.com/albums/n596/MZStrongbow/Mining/CAM02470_zps19e822bf.jpg (http://s1141.photobucket.com/user/MZStrongbow/media/Mining/CAM02470_zps19e822bf.jpg.html)

Now taking orders...

Customizable lids at little to NO extra charge!

Custom lid for MinerSource.net order!
(first print before changes-enlarged logo and modified the lid dimensions a tad after this print)

http://i1141.photobucket.com/albums/n596/MZStrongbow/Mining/CAM02477_zps9b9fa86f.jpg (http://s1141.photobucket.com/user/MZStrongbow/media/Mining/CAM02477_zps9b9fa86f.jpg.html)

More pics soon! (unmounted/unpopulated cases)

Could you make them for the Black arrow control boards? These:

http://www.blackarrowsoftware.com/store/bitfury-controller-version-2.html (http://www.blackarrowsoftware.com/store/bitfury-controller-version-2.html)

Yes. I do not own one of those so I would need dimensions (L x W x H) in Millimeters preferably. Although it would be much faster with a unit in hand, I do not require nor need a unit on hand to design and produce a case.

I have also been working on a case for the DualPSU adapters...
http://www.poweredrisers.com/dual-power-supply-adapter-similar-to-add2psu/

and eventually for this one...
http://www.amazon.com/Add2PSU-Multiple-Power-Supply-Adapter/dp/B009P98Q8U

Nice work.

Thanks very much. I enjoy making stuff.

2 orders have been placed and are being worked on and/or printed now. Thanks all!

More pics soon!

Thanks MinerSource.net for the sweet swag along with my miners. I have already slapped a sticker on my printer, haha
Totally awesome!

R-Box (orb) mounts are coming soon! Should know more tomorrow  ;D

http://i1141.photobucket.com/albums/n596/MZStrongbow/Mining/CAM02497_zps48d99c86.jpg (http://s1141.photobucket.com/user/MZStrongbow/media/Mining/CAM02497_zps48d99c86.jpg.html)

http://i1141.photobucket.com/albums/n596/MZStrongbow/Mining/CAM02498_zps2d76cca2.jpg (http://s1141.photobucket.com/user/MZStrongbow/media/Mining/CAM02498_zps2d76cca2.jpg.html)

http://i1141.photobucket.com/albums/n596/MZStrongbow/Mining/CAM02518_zpsaa48d5a5.jpg (http://s1141.photobucket.com/user/MZStrongbow/media/Mining/CAM02518_zpsaa48d5a5.jpg.html)

What the revised case looks like currently...
http://i1141.photobucket.com/albums/n596/MZStrongbow/Mining/CAM02515_zpsdbcf170b.jpg (http://s1141.photobucket.com/user/MZStrongbow/media/Mining/CAM02515_zpsdbcf170b.jpg.html)

http://i1141.photobucket.com/albums/n596/MZStrongbow/Mining/CAM02508_zps4f69908c.jpg (http://s1141.photobucket.com/user/MZStrongbow/media/Mining/CAM02508_zps4f69908c.jpg.html)

http://i1141.photobucket.com/albums/n596/MZStrongbow/Mining/CAM02509_zps31297144.jpg (http://s1141.photobucket.com/user/MZStrongbow/media/Mining/CAM02509_zps31297144.jpg.html)

http://i1141.photobucket.com/albums/n596/MZStrongbow/Mining/CAM02510_zps674f1d62.jpg (http://s1141.photobucket.com/user/MZStrongbow/media/Mining/CAM02510_zps674f1d62.jpg.html)

http://i1141.photobucket.com/albums/n596/MZStrongbow/Mining/CAM02514_zps0788924e.jpg (http://s1141.photobucket.com/user/MZStrongbow/media/Mining/CAM02514_zps0788924e.jpg.html)

http://i1141.photobucket.com/albums/n596/MZStrongbow/Mining/CAM02513_zps7f83f783.jpg (http://s1141.photobucket.com/user/MZStrongbow/media/Mining/CAM02513_zps7f83f783.jpg.html)

Just wanted to post a quick update...

I am putting NEW orders on hold until Monday as I am pegged until next Wednesday fulfilling current orders. I am also waiting on a supply of filament so current orders may be completed. If there are any delays with your order, expect a PM from me but otherwise doing great!

The R-Box/Gridseed Orb mount design is near completion and should be ready for production this evening.

More later, it was a long/late night here and I am bushed.

The guys at Minersource are great.  I am very impressed with them.
Great swag.
The cases loo great.
Keep up the great work.   8)

Fresh off the printer...

http://i1141.photobucket.com/albums/n596/MZStrongbow/Mining/CAM02564_zpsafe9727f.jpg (http://s1141.photobucket.com/user/MZStrongbow/media/Mining/CAM02564_zpsafe9727f.jpg.html)

http://i1141.photobucket.com/albums/n596/MZStrongbow/Mining/CAM02563_zpsf1d60199.jpg (http://s1141.photobucket.com/user/MZStrongbow/media/Mining/CAM02563_zpsf1d60199.jpg.html)

Awesome!!!!!!
I cannot wait to get it.
It looks great.

You bet and thanks! Just what I like to hear  ;D
It's all packaged up and ready to roll out tomorrow.

I would like one of these.  The color yellow works for me.    I do not need a fancy cut out. like minersource or talon.   just a few round holes to allow air to circulate for cooling.

Would you be okay with the BlackArrow software logo (shown in first 2 posts)? Otherwise I will gladly slap a few holes in the lid but I will say this, I haven't noticed either of my boards getting hot at all. I have 2 yellows available, one is more neon and the other is closer to canary yellow. Also, I have a fluorescent red  being delivered this week.

Taking orders again!

Shipping out this BIG order today...(plus others)

http://i1141.photobucket.com/albums/n596/MZStrongbow/Mining/CAM02565_zps380b30cb.jpg (http://s1141.photobucket.com/user/MZStrongbow/media/Mining/CAM02565_zps380b30cb.jpg.html)

http://i1141.photobucket.com/albums/n596/MZStrongbow/Mining/CAM02566_zps1da8fc47.jpg (http://s1141.photobucket.com/user/MZStrongbow/media/Mining/CAM02566_zps1da8fc47.jpg.html)

http://i1141.photobucket.com/albums/n596/MZStrongbow/Mining/CAM02567_zps57d74066.jpg (http://s1141.photobucket.com/user/MZStrongbow/media/Mining/CAM02567_zps57d74066.jpg.html)

the blackarrow is fine easy for you is what works. 

I will be shipping out tomorrow! Finishing up the last few orders tonight. 1 of 3 filament orders arrived yesterday and I put my printer straight to work. The yellow looks amazing!

I also wanted to share this link as it is super cool seeing my work out there!
http://minersource.net/collections/frontpage/products/atx-to-dc-power-adapter

Buy them from us and Ill toss in our covers :P

New color in stock! Also, check out my 3D printing services thread linked below  :P
http://i1141.photobucket.com/albums/n596/MZStrongbow/3dP/CAM02581_zps4ad70ca0.jpg (http://s1141.photobucket.com/user/MZStrongbow/media/3dP/CAM02581_zps4ad70ca0.jpg.html)
https://bitcointalk.org/index.php?topic=559734.msg7480196#msg7480196

That is a rainbow of colors that is for sure.
I love my case.  The stacking bracket is cool as well.
I have never had anything that is 3D printed before.  I like how sturdy it is. 
Thanks again.
http://i72.photobucket.com/albums/i173/Talon8Ya/MTG%20for%20Sale/Case5.jpg
http://i72.photobucket.com/albums/i173/Talon8Ya/MTG%20for%20Sale/Case4.jpg
http://i72.photobucket.com/albums/i173/Talon8Ya/MTG%20for%20Sale/Case3.jpg

How much in BTC for two in black (shipped in the US)? :)

PM'd and payment received. I''m going to stay up awhile and get this order knocked out so I can get caught up and ready for my next BIG order.

Stay tuned for pics...charging my camera (phone) now!

~Morgan

more prints!

Canary case
http://i1141.photobucket.com/albums/n596/MZStrongbow/3dP/CAM02598_zps10a2a835.jpg (http://s1141.photobucket.com/user/MZStrongbow/media/3dP/CAM02598_zps10a2a835.jpg.html)
http://i1141.photobucket.com/albums/n596/MZStrongbow/3dP/CAM02596_zpsceadb676.jpg (http://s1141.photobucket.com/user/MZStrongbow/media/3dP/CAM02596_zpsceadb676.jpg.html)
http://i1141.photobucket.com/albums/n596/MZStrongbow/3dP/CAM02595_zpsdd070b09.jpg (http://s1141.photobucket.com/user/MZStrongbow/media/3dP/CAM02595_zpsdd070b09.jpg.html)
http://i1141.photobucket.com/albums/n596/MZStrongbow/3dP/CAM02592_zps4d4ce805.jpg (http://s1141.photobucket.com/user/MZStrongbow/media/3dP/CAM02592_zps4d4ce805.jpg.html)

R-Pi case
http://i1141.photobucket.com/albums/n596/MZStrongbow/3dP/CAM02582_zpsf38fa227.jpg (http://s1141.photobucket.com/user/MZStrongbow/media/3dP/CAM02582_zpsf38fa227.jpg.html)
http://i1141.photobucket.com/albums/n596/MZStrongbow/3dP/CAM02585_zps41c613e3.jpg (http://s1141.photobucket.com/user/MZStrongbow/media/3dP/CAM02585_zps41c613e3.jpg.html)

All orders up to date have been shipped and tracking info PM'd.

Currently waiting on filament for a custom order  ;D

Thanks all!

Next 7 individual orders will receive a FREE R-Box prototype (pre-production) mount.  :o

Just mention this posting when sending payment/shipping info to claim your FREE R-Box mount.

Thanks!

Do you make Pi cases that you can attach the fan to?

If there isn't an R-Pi case with the ability to attach a fan, I can surely design one with ease. Have a certain fan size in mind? I am fairly new to using an R-Pi but I do have a model A here.

Found one!

http://www.thingiverse.com/thing:26876

Cool!!
 8)
I will save up if you can let me know how much it costs?

Right around $13 shipped for the standard design found in the link.

Finishing up more custom work...
http://i1141.photobucket.com/albums/n596/MZStrongbow/Mining/CAM02648_zpse183253e.jpg (http://s1141.photobucket.com/user/MZStrongbow/media/Mining/CAM02648_zpse183253e.jpg.html)
http://i1141.photobucket.com/albums/n596/MZStrongbow/Mining/CAM02649_zpsbaa6e757.jpg (http://s1141.photobucket.com/user/MZStrongbow/media/Mining/CAM02649_zpsbaa6e757.jpg.html)
http://i1141.photobucket.com/albums/n596/MZStrongbow/Mining/CAM02650_zps2d8a07aa.jpg (http://s1141.photobucket.com/user/MZStrongbow/media/Mining/CAM02650_zps2d8a07aa.jpg.html)

I LOVE IT THANK YOU SO MUCH!!

Please see consolidated thread here...

https://bitcointalk.org/index.php?topic=694666.0

Thanks!

Cool deal.
How does the fan mount I can not tell from the pics.

That design utilized screws I believe. Once I get my R-Pi fan, I can tweak my design to incorporate a fan mount (clip-in style) TOOL-LESS!

Do you have a fan in mind? I would just need to LxWxH(D) specs and would be very simple to model

I'm not sure I had not purchased a fan yet because I had not decided on a case.  If you find something nice let me know.

Word. I should have mine here by weeks end and should only take a few to incorporate the fan mount into the lid.

That works let me know how it goes.
Then I can do a whole kit from you.  :)